PCS-1000I [GWINSTEK]
ISOLATED OUTPUT HIGH PRECISION CURRENT SHUNT METER;型号: | PCS-1000I |
厂家: | GWINSTEK |
描述: | ISOLATED OUTPUT HIGH PRECISION CURRENT SHUNT METER 输出元件 |
文件: | 总2页 (文件大小:537K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ISOLATED OUTPUT HIGH PRECISION CURRENT SHUNT METER
PCS-1000I
FEATURES
6 1/2 Digit Voltage and Current
Measurement Resolution
Simultaneous Current and Voltage
Measurement
Five Current Measurement Levels(AC
& DC) : 30mA/300mA/3A/30A/300A
AC Voltage Measurement Levels :
200mV/2V/20V/200V/600V
DC Voltage Measurement Levels :
200mV/2V/20V/200V/1000V
Standard : USB & GPIB
GW Instek rolls out the new PCS-1000I isolated output
high precision current shunt meter, which inherits the
Connection Comparison
PCS-1000I can simultaneously measure current and
voltage with 6 1/2 measurement resolution. The
below diagram shows the connection method of
simultaneous voltage and current measurement function
of PCS-1000. PCS-1000I adopts five sets of independent
shunt resistors to provide five current measurement
simultaneous measurement. Compared with the test
levels, including 300A, 30A, 3A, 300mA, and 30mA to
of conventional meters from other brands, PCS-1000I
meet the requirements of different current level
is simple in connection and there is no requirement
measurements. Internally, PCS-1000I utilizes two sets
of 24bits ADCs and low temperature coefficient
CE Verification
of any additional instrument.
electronic components to mainly focus on the current
PCS-1000I Conducts Simultaneous Voltage
measurement of power supply devices. High precision
and Current Measurement
PCS-1000I can be used in adjusting and calibrating
instruments. Additionally, temperature variation will not
cause PCS-1000I to yield any measurement errors. PCS-
1000I can automatically select optimal measurement
level with the maximum resolution so as to replace
manual selection to save operational time.
PCS-1000I provides a BNC output, which can connect
with an oscilloscope to directly observe current
waveform variation without using a current probe.
General oscilloscopes do not have isolated channels
and their input and output are structured at a common
point, therefore, the output load will likely result in
and current
1.Only one PCS-1000I is needed to measure voltage
Front Panel
measurement errors. PCS-1000I's isolated current
2.Easy connection
output design can prevent measurement errors from an
3.USB and GPIB communications on the rear panel
oscilloscope with non-isolated outputs. PCS-1000I, a
can be used for data communication while
high precision AC/DC current shunt meter, not only
connecting with a PC
provides USB and GPIB communications interfaces for
users to remotely control the instrument but also
conducts simultaneous voltage and current
measurements. The SCPI communications commands
of PCS-1000I allow users to remotely control PCS-1000I
via a PC to operate measurement data readbacks.
Shunt Resistor Conducts Current and Voltage
Measurement
Rear Panel
1.One voltage meter is needed to measure voltage on
shunt and the voltage will be converted to current.
For simultaneous voltage and current measurement,
one extra voltage meter is required
PCS-1000I high precision AC and DC shunt meter can
2.Complex connection
simultaneously measure current and voltage with the
3.For data communication with a PC, the PC must be
maximum 6 1/2 measurement resolution. The above diagram
connected to two voltage meters
PCS-1000I
shows the connection method of simultaneous measurement.
Compared with the test of conventional meters from
vs. Current Probe for Measurement
Conventional Shunt Meter Conducts Current
and Voltage Measurement
other brands, PCS-1000I is simple in connection and
there is no requirement of any additional instrument.
Isolated Output Current
Output Design
APPLICATIONS
Power Supply Analysis
Power Supply Measurement Application
R & D and Laboratory Application
Quality Inspection Test
1.This method requires one shunt meter, one current
meter to increase current measurement resolution,
and one voltage meter to measure voltage
2.Complex connection
Precision Measurement
PCS-1000I adopts isolated current output design. Its
BNC output can directly connect with an oscilloscope
to avoid measurement errors resulted from the common
ground of oscilloscope's analog input measurement.
3.For data communication with a PC, the PC must be
connected to two meters
Simply Reliable
PCS-1000I
SPECIFICATIONS
DC Voltage
Ranꢂe
DC
CHARACTERISTICS
1 Year 23 ℃ 5 ℃
0.0050 ꢁ 0.0035
0.0050 ꢁ 0.0010
0.0050 ꢁ 0.0010
0.0050 ꢁ 0.0010
0.0050 ꢁ 0.0020
Temperature Coefficient/℃
0.0005 ꢁ 0.0005
0.0005 ꢁ 0.0001
200.0000 mV
2.000000 V
20.00000 V
200.0000 V
1000.000 V
0.0005 ꢁ 0.0001
0.0005 ꢁ 0.0001
0.0005 ꢁ 0.0001
Accuracy specification : (ꢀ of reading ꢁ ꢀ of range);voltage input resistance: 10MΩ for all DC voltage ranges
DC Current
Burꢁen Voltaꢂe
Ranꢂe
Temperature Coefficient/℃
0.001 + 0.002
0.001 + 0.002
1 Year 23 ℃ 5 ℃
0.01 + 0.005
0.01 + 0.005
0.01 + 0.005
0.01 + 0.005
0.02 + 0.005
30.00000 mA
300.0000 mA
3.000000 A
30.00000 A
300.0000 A
< 0.4 V
< 0.5 V
< 0.8 V
< 0.8 V
< 0.8 V
0.001 + 0.002
0.001 + 0.002
0.001 + 0.002
*1
*1
Accuracy specification : ꢀ( of reaꢁinꢂ ꢃ ( of ranꢂeꢄ
Temperature Coefficient/℃
Isolated DC Current
Monitor Accuracy
Resolutionꢀ6 1/2ꢄ
DC Accuracy
Ranꢂe
0.1 + 0.05
0.1 + 0.05
0.1 + 0.05
0.1 + 0.05
0.2 + 0.05
0.001
0.001
0.001
0.001
0.001
30.00000 mA
300.0000 mA
3.000000 A
30.00000 A
300.0000 A
0.00001mA
0.0001mA
0.000001A
0.00001A
0.0001A
*1
*1
Accuracy specification : (ꢀ of output ꢁ ꢀ of full scale);monitor output voltage for the full scale current = 3V
AC
CHARACTERISTICS
Temperature Coefficient/℃
True RMS AC Voltage
Frequency
Ranꢂe
1 Year 23 ℃ 5 ℃
0.005 + 0.005
0.005 + 0.005
0.005 + 0.005
0.005 + 0.005
0.005 + 0.005
200.0000 mV
2.000000 V
20.00000 V
200.0000 V
600.000 V
45Hz~2kHz
2kHz~10kHz
10kHz~20kHz
0.5 ꢁ 0.05
1.0 ꢁ 0.05
2.0 ꢁ 0.10
Accuracy specification : (ꢀ of reading ꢁ ꢀ of range)
True RMS AC Current
Temperature Coefficient/℃
Frequency
Ranꢂe
1 Year 23 ℃ 5 ℃
0.03 + 0.006
0.03 + 0.006
0.03 + 0.006
0.03 + 0.006
0.03 + 0.006
30.00000 mA
300.0000 mA
3.000000 A
0.5 ꢁ 0.05
1.0 ꢁ 0.05
45Hz~2kHz
2kHz~10kHz
*1
30.00000 A
300.0000 A
Accuracy specification : (ꢀ of reading ꢁ ꢀ of range)
45Hz~400Hz
0.5 ꢁ 0.05
*1
Isolated AC Current
Monitor Accuracy
Temperature Coefficient/℃
Frequency
Ranꢂe
AC Accuracy
0.001
0.001
0.001
0.001
0.001
30.00000 mA
300.0000 mA
3.000000 A
30.00000 A
300.0000 A
0.2 ꢁ 0.05
0.5 ꢁ 0.05
45Hz~2kHz
2kHz~10kHz
*1
45Hz~400Hz
0.5 ꢁ 0.05
*1
Accuracy specification : (ꢀ of output ꢁ ꢀ of full scale); monitor output voltage for the full scale current
= 3V; The specifications are only applicable when the input is 10ꢀ or greater of the full scale range
100 V/120 V/220 V/240 V 10ꢀ
50/60 Hz
Full accuracy for 0 ℃ ~ 55 ℃, Full accuracy to 80ꢀ R.H. at 40 ℃
-40 ℃ ~ 70 ℃
Max 35VA
210(W) x 80(H) x 390(D)mm ; Approx. 5 kg
Power Supply
GENERAL
Power Line Frequency
Operating Environment
Storage Environment
Power Consumption
Dimensions Weight
(The specifications apply when the PCS-1000I is powered on for at least 30 minutes to warm-up to a temperature of 18 ℃~ 28 ℃, unless specified otherwise.)
Note: *1 The accuracy for 30A/300A levels must be increased by a power factor of 8 ppm/watt.
Specifications subject to change without notice.
CS1000GD1DH
OPTIONAL ASSESSORIES
ORDERING INFORMATION
PCS-1000I
ACCESSORIES
Quick Operation Guide, User Manual (CD) x 1, AC Power Cord x 1 (Region Dependant),
GRA-419-J Rack Mount Adapter (JIS)
GRA-419-E Rack Mount Adapter (EIA)
Isolated Output High Precision Current Shunt Meter
GTL-105A Alligator Clip Test Lead (3A Max)
GTL-207 Banana Plug Test Lead
GTL-240 USB Cable
PCS-001 Basic Accessory Kit
Global Headquarters
U.S.A. Subsidiary
GOOD WILL INSTRUMENT CO., LTD.
No.7-1, Jhongsing Road, Tucheng Dist., New Taipei City 236, Taiwan
T ꢁ886-2-2268-0389 F ꢁ886-2-2268-0639
INSTEK AMERICA CORP.
5198 Brooks Street Montclair, CA 91763, U.S.A.
T ꢁ1-909-399-3535 F ꢁ1-909-399-0819
E-mail: sales@instekamerica.com
E-mail: marketing@goodwill.com.tw
China Subsidiary
Japan Subsidiary
GOOD WILL INSTRUMENT (SUZHOU) CO., LTD.
No. 521, Zhujiang Road, Snd, Suzhou Jiangsu 215011 China
TEXIO TECHNOLOGY CORPORATION.
7F Towa Fudosan Shin Yokohama Bldg., 2-18-13 Shin
Yokohama, Kohoku-ku, Yokohama, Kanagawa,
222-0033 Japan
T ꢁ81-45-620-2305 F ꢁ81-45-534-7181
E-mail: info@texio.co.jp
T ꢁ86-512-6661-7177 F ꢁ86-512-6661-7277
E-mail: marketing@instek.com.cn
Simply Reliable
Malaysia Subsidiary
GOOD WILL INSTRUMENT (M) SDN. BHD.
No. 1-3-18, Elit Avenue, Jalan Mayang Pasir 3,
11950 Bayan Baru, Penang, Malaysia
T ꢁ604-6111122 F ꢁ604-6115225
Korea Subsidiary
GOOD WILL INSTRUMENT KOREA CO., LTD.
Room No.503, Gyeonginro 775 (Mullae-Dong 3Ga,
Ace Hightech-City B/D 1Dong), Yeongduengpo-Gu,
Seoul 150093, Korea.
E-mail: sales@goodwill.com.my
Europe Subsidiary
GOOD WILL INSTRUMENT EURO B.V.
De Run 5427A, 5504DG Veldhoven, THE NETHERLANDS
T ꢁ31(0)40-2557790 F ꢁ31(0)40-2541194
T ꢁ82-2-3439-2205 F ꢁ82-2-3439-2207
E-mail : gwinstek@gwinstek.co.kr
www.gwinstek.com
www.facebook.com/GWInstek
相关型号:
©2020 ICPDF网 联系我们和版权申明