PFR-100L [GWINSTEK]
FANLESS MULTI-RANGE D.C. POWER SUPPLY;型号: | PFR-100L |
厂家: | GWINSTEK |
描述: | FANLESS MULTI-RANGE D.C. POWER SUPPLY |
文件: | 总2页 (文件大小:452K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
FANLESS MULTI-RANGE D.C. POWER SUPPLY
PFR-100L/100M
FEATURES
Constant Power Output for Fivefold
Multi-Range(V&I) Operation
Natural Convection Cooling Design
(Fanless Structure)
Preset Memory Function
Output ON/OFF Delay Function
CV, CC Priority Mode
Adjustable Slew Rate For Voltage and Current
Bleeder Circuit Control
Protection : OVP, OCP, AC FAIL and OTP
Support Front Panel and Rear Panel Output
Built-in USB and RS-232/485 Interface
Optional LAN+GPIB
Analog
LAN
Control
Web Server Monitoring and Control
External Analog Control and Monitor Function
Remote Sensing Function
The PFR-100 series, a small and high-
performance programmable D.C. power
supply, adopts natural convection design
to dissipate heat. The fanless structure
allows users to focus on their
The LAN interface for PFR-100 is Ethernet
port. PFR-100 also has a built-in web
server and intuitive user interface. Users,
via general browsers including Internet
Explorer, Mozilla Firefox or Android
cellular phones, can monitor PFR-100's
test and measurement anywhere. Users
not only can remotely monitor PFR-100
via internet, but also remotely observe
and adjust their operating PFR-100s in
the lab from your home. The outputs of
PFR-100 series can be monitored
experiments and tests in a quiet
environment. Fanless power supply will
not suck in dust and foreign objects,
therefore, PFR-100 series has a longer life
cycle compared with that of power
supplies with fan.
PFR-100L Front Panel PFR-100M Front Panel
including OVP, OCP, UVL; and the
system information can be checked such
as unit's serial number, firmware edition
and internet setting. Users can remotely
adjust PFR-100 settings, including output
voltage/current, the slew rate for
voltage/current, Bleeder circuit control,
OCP, delayed time for output voltage and
Buzzer settings.
The PFR-100 series is a power supply
with a five-fold rated power that allows
users to self-define voltage and current
under rated power conditions so as to
satisfy them with wider voltage and
current operational ranges. PFR-100
series, with rated 100W, provides two
models: PFR-100L- maximum output
voltage of 50V (at 2A) or maximum
output current of 10A (at 10V); PFR-
100M- maximum output voltage of 250V
(at 0.4A) or maximum output current of
2A (at 50V).
The PFR-100 series provides special
functionalities to meet test requirements
for different load's characteristics. The
CC priority mode can be applied for DUTs
with diode characteristics to prevent DUT
from being damaged by inrush current. A
slow rise time for voltage can also protect
DUT from inrush current, especially for
tests on capacitive load. When power is
off or load is disconnected, the activation
of Bleeder circuit control will allow the
bleeder resistor to consume filter
PFR-100L Rear Panel
PFR-100M Rear Panel
The PFR-100 series provides front and
rear panel output terminals. The front
panel output terminal helps users
shorten test lead replacement time while
conducting adjustment on front panel's
function keys. The rear panel output
terminal facilitates an easy wiring
APPLICATIONS
LED Module Test and Reliability Test
Charging Test for Battery Cell
DC/DC Converter Applications
DC Motor Test Applications
Solar Module Quality Test
operation for rackmount assembly. 3U
height, 70mm width and 2.5KG in weight
have greatly elevated PFR-100 series
portability. Furthermore, the multi-drop
mode allows users to control up to 31
PFR-100 series without using switch/Hub
that help users save the equipment cost.
capacitor's electricity. Without the bleed
resistor, power supply's filter capacitor
may still have electricity that is a potential
hazard. For automatic testing equipment
systems, the bleeder resistor allows
PFR-100 series to rapidly discharge to
prepare itself for the next operation.
PFR-100L/100M
Simply Reliable
SPECIFICATIONS
OUTPUT RATING
PFR-100L
PFR-100M
Model
Rated Output Voltage
Rated Output Current
Rated Output Power
50V
10A
100W
250V
2A
100W
REGULATION(CV)
REGULATION(CC)
RIPPLE & NOISE (*3)
10mV
3mV
33mV
5mV
Load Regulation (*2)
Line Regulation (*1)
10mA
8mA
3.2mA
1.2mA
Load Regulation (*9)
Line Regulation (*1)
Vp-p (*4)
50mV
150mV
4mV
10mA
15mV
2mA
Vr.m.s.(*5)
A r.m.s.
40mV
20mA
200mV
2mA
PROGRAMMING ACCURACY
MEASUREMENT ACCURACY
RESPONSE TIME
0.1% of setting +
0.2% of setting +
Voltage
Current
Voltage
Current
0.1% of reading +
0.2% of reading +
40mV
20mA
200mV
2mA
50ms
100ms
200ms
1000ms
2ms
Rise Time (*6)
Fall Time (*7)
Rated load
Rated load
No load
100ms
500ms
1.5ms
Transient Response Time (*8)
PROGRAMMING RESOLUTION
MEASUREMENT RESOLUTION
2mV
1mA
10mV
0.1mA
Voltage
Current
2mV
1mA
10mV
0.1mA
Voltage
Current
PROTECTION FUNCTION
Over Voltage Protection (OVP)
Over Current Protection (OCP)
Under Voltage Limit (UVL)
Over Temperature Protection (OTP)
Low AC Input Protection (AC-Fail)
Power Limit (Power Limit)
Setting range
Setting range
Setting range
Operation
5~55V
1~11A
0~52.5V
5~275V
0.2~2.2A
0~262.5V
Turn the output off.
Turn the output off.
Turn the output off.
Turn the output off.
Turn the output off.
Turn the output off.
Operation
Operation
FRONT PANEL DISPLAY
ACCURACY, 4 DIGITS
40mV
20mA
200mV
2mA
Voltage
Current
0.1% of reading +
0.2% of reading +
Operaing Temperature
Storage Temperature
Operating Humidity
Storage Humidity
ENVIRONMENT CONDITION
0°C to 40°C
-20°C to 70°C
20% to 80% RH; No condensation
20% to 85% RH; No condensation
READBACK TEMP. COEFFICIENT
(After A 30 Minute Warm-up)
100ppm/℃
200ppm/℃
Voltage
Current
Analog Control
Interface
AC Input
Yes
USB, RS-232/RS-485; Factory option: LAN/GPIB
85~265VAC, 47~63Hz, single pahse
OTHER
70(W)x124(H)x300(D)mm; Approx.2.5kg
DIMENSIONS & WEIGHT
*1: At 85 ~ 132Vac or 170 ~ 265Vac, constant load.
PFR-100 Series Fanless Multi-Range D.C. Power Supply
*2: From No-load to Full-load, constant input voltage. Measured at the sensing point in Remote Sense.
*3: Measure with JEITA RC-9131B (1:1) probe
*4: Measurement frequency bandwidth is 10Hz to 20MHz.
PFR-100 - GL - GTL-258
Cable Options:
Model:
L : 0~50V/10A/100W
M : 0~250V/2A/100W
GTL-258 : A GPIB cable including 25 pins Micro-D connector
PSU-232 : An RS-232 cable including RJ-45 connector
PSU-485 : An RS-485 cable including RJ-45 connector
GTL-246 : A USB cable for TypeA-TypeB connectors
*5: Measurement frequency bandwidth is 5Hz to 1MHz.
*6: From 10%~90% of rated output voltage, with rated resistive load.
*7: From 90%~10% of rated output voltage, with rated resistive load.
*8: Time for output voltage to recover within 0.1% + 10mV of its rated output for a
load change from 50 to 100% of its rated output current.
:
None
Interface Options:
: USB(Type B)& RS-232/RS-485(RJ-45 connector) as default
GL : LAN & GPIB(25 pins Micro-D connector)
*9: For load voltage change, equal to the unit voltage rating, constant input voltage.
OPTIONAL ASSESSORIES
ORDERING INFORMATION
GPIB Cable, 2000mm
PFR-100L
PFR-100M
Fanless Multi-Range D.C. Power Supply
Fanless Multi-Range D.C. Power Supply
RS-232 Cable with DB9 Connector Kit
RS-485 Cable with DB9 Connector Kit
USB Cable (USB 2.0 Type A-TypeB Cable)
Rack mount adapter(JIS)with AC 100V/200V
Rack mount adapter(EIA)with AC 100V/200V
LAN+GPIB interface
ACCESSORIES
CD(User Manual, Programming manual) x 1 , Power cord , GTL-134 test lead , Accessory
Packages,GTL-104A test lead(for PFR-100L only) , GTL-105A test lead(for PFR-100M only)
Specifications subject to change without notice.
PFR100LMDIC1DH
Global Headquarters
U.S.A. Subsidiary
GOOD WILL INSTRUMENT CO., LTD.
No.7-1, Jhongsing Road, Tucheng Dist., New Taipei City 236, Taiwan
T +886-2-2268-0389 F +886-2-2268-0639
INSTEK AMERICA CORP.
5198 Brooks Street Montclair, CA 91763, U.S.A.
T +1-909-399-3535 F +1-909-399-0819
E-mail: sales@instekamerica.com
E-mail: marketing@goodwill.com.tw
China Subsidiary
Japan Subsidiary
GOOD WILL INSTRUMENT (SUZHOU) CO., LTD.
No. 521, Zhujiang Road, Snd, Suzhou Jiangsu 215011 China
TEXIO TECHNOLOGY CORPORATION.
7F Towa Fudosan Shin Yokohama Bldg., 2-18-13 Shin
Yokohama, Kohoku-ku, Yokohama, Kanagawa,
222-0033 Japan
T +81-45-620-2305 F +81-45-534-7181
E-mail: info@texio.co.jp
T +86-512-6661-7177 F +86-512-6661-7277
E-mail: marketing@instek.com.cn
Malaysia Subsidiary
Simply Reliable
GOOD WILL INSTRUMENT (SEA) SDN. BHD.
No. 1-3-18, Elit Avenue, Jalan Mayang Pasir 3,
11950 Bayan Baru, Penang, Malaysia
T +604-6111122 F +604-6115225
Korea Subsidiary
GOOD WILL INSTRUMENT KOREA CO., LTD.
Room No.503, Gyeonginro 775 (Mullae-Dong 3Ga,
Ace Hightech-City B/D 1Dong), Yeongduengpo-Gu,
Seoul 150093, Korea.
E-mail: sales@goodwill.com.my
Europe Subsidiary
GOOD WILL INSTRUMENT EURO B.V.
De Run 5427A, 5504DG Veldhoven, THE NETHERLANDS
T +31(0)40-2557790 F +31(0)40-2541194
T +82-2-3439-2205 F +82-2-3439-2207
E-mail : gwinstek@gwinstek.co.kr
www.gwinstek.com
www.facebook.com/GWInstek
相关型号:
©2020 ICPDF网 联系我们和版权申明