H4083 [HAMAMATSU]

Charge amplifier; 电荷放大器
H4083
型号: H4083
厂家: HAMAMATSU CORPORATION    HAMAMATSU CORPORATION
描述:

Charge amplifier
电荷放大器

模拟IC 信号电路 放大器
文件: 总2页 (文件大小:225K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
M O D U L E  
Charge amplifier  
H4083  
For radiation and high energy particle detection  
H4083 is a low-noise hybrid charge amplifier designed for a wide range of spectrometric applications including soft X-ray and low to high energy  
gamma-ray spectrometry. The first stage of this amplifier uses a low-noise junction type FET, which exhibits excellent performance when used  
with a photodiode having a large junction capacitance. H4083 is especially suited for use with Hamamatsu S3590/S3204 series, etc. Si PIN  
photodiodes. S3590 series photodiodes can be directly mounted on the backside of H4083, so there will be no increase in stray capacitance.  
H4083 is compact and lightweight, making detector design and development more flexible.  
Features  
Applications  
Low noise  
Detection of X-rays, radiation, high energy particles  
Compact and lightweight  
Easy handling  
Specification  
Parameter  
Specification  
Amplification method  
Input/output polarity  
Charge gain  
Charge-sensitive type  
Inverted  
0.5 V/pC  
22 mV/MeV (Si)  
550 electrons/FWHM  
50 M//2 pF  
Noise characteristic  
Negative feedback constant  
Power supply  
±12 V  
Power consumption  
Configuration  
Dimensional outline  
150 mW  
9-pin, single line type  
24 (W) × 19 (H) × 4 (T) mm  
Equivalent circuit  
GAIN  
2 pF  
THROUGH-HOLE B  
THROUGH-HOLE A  
50 M  
+12 V  
OUT  
0.01 µF  
IN  
-12 V  
1.5 pF  
,
,
CAL  
GND  
KACCC0019EA  
Charge amplifier H4083  
Pin connection  
Pin No.  
Symbol  
IN  
Content  
Input terminal  
GAIN  
GND *  
CAL  
Feedback constant adjustment terminal  
Input ground terminal  
Last pulse input terminal  
Power and output ground terminal  
Power terminal  
GND *  
-12 V  
+12 V  
GND *  
OUT  
P
Power terminal  
Output ground terminal  
Output terminal  
Through-hole A  
Anode connection terminal  
Cathode connection terminal  
Through-hole B N  
* GND is internally connected.  
The left end pin is designated No. 1 when viewed from the component side with the pins facing downwards.  
Using pin No. 2  
Use pin No. 2 when changing the feedback constant which is typically 50 M/2 pF. Connect feedback resistance and capaci-  
tance between pin No. 2 and No. 9. Note that this connection is made parallel to the internal feedback resistance and capaci-  
tance.  
Component side diagram  
Changing the feedback resistance and capacitance  
If you want to change the feedback constant without making  
parallel connections, directly replace the resistor (Rf) and ca-  
pacitor (Cf) shown at the right, which serve as feedback resis-  
Cf  
tance and capacitance.  
Rf  
Replacement components shoud be 2012 size.  
Using through-holes A and B  
When H4083 is not covered with protective coating, a photo-  
diode (such as S3590 series) can be directly soldered on the  
board. In this case, insert the photodiode leads into the through-  
holes from the solder side.  
1
2
3
4
5
6
7
8
9
Dimensional outline (unit: mm)  
KACCC0136EA  
COMPONENT SIDE  
SOLDER SIDE  
(7)  
THROUGH-HOLE  
FOR PHOTODIODE  
(8 ×) 2.54  
0.25  
4 MAX.  
0.5  
KACCA0017EB  
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.  
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2001 Hamamatsu Photonics K.K.  
HAMAMATSU PHOTONICS K.K., Solid State Division  
1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: (81) 053-434-3311, Fax: (81) 053-434-5184, http://www.hamamatsu.com  
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218  
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658  
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10  
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777  
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01  
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741  
Cat. No. KACC1053E01  
Apr. 2001 DN  

相关型号:

H408503A00J0G

Barrier Strip Terminal Block
AMPHENOL

H408503D00J0G

Barrier Strip Terminal Block
AMPHENOL

H408504B00J0G

Barrier Strip Terminal Block
AMPHENOL

H408505B00J0G

Barrier Strip Terminal Block,
AMPHENOL

H408702C00J0G

Barrier Strip Terminal Block
AMPHENOL

H408704C00J0G

Barrier Strip Terminal Block
AMPHENOL

H408708A00J0G

Barrier Strip Terminal Block
AMPHENOL

H408708B00J0G

Barrier Strip Terminal Block
AMPHENOL

H408708C00J0G

Barrier Strip Terminal Block
AMPHENOL

H408708D00J0G

Barrier Strip Terminal Block
AMPHENOL

H409500A00J0G

Barrier Strip Terminal Block
AMPHENOL

H40A-100-ABC-15V

H40 Shock Proof Optical Encoder
ETC