L10451-07 [HAMAMATSU]
Laser Diode, 808nm;型号: | L10451-07 |
厂家: | HAMAMATSU CORPORATION |
描述: | Laser Diode, 808nm 光电 |
文件: | 总4页 (文件大小:327K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CW LASER DIODES
L10452 , L10451 , L8763 , L8828 SERIES
PRELIMINARY DATA
High radiant flux from a single chip
FEATURES
High radiant flux and its density(CW)
L10452 series : 0.5 W / 50 µm
L10451 series : 1 W / 100 µm
L8763 series : 1 W / 50 µm
L8828 series : 2 W / 100 µm
High stability
Long life
Compact
APPLICATIONS
Pumping source for solid state lasers
Printing
Medical instrument
Measuring instrument
Material Processing
Marking
HAMAMATSU CW laser diodes, L10452, L10451, L8763, L8828 series feature high radiant flux of 0.5 to 2.0 W
under CW operation. As this is single chip and single element type, emitting area is small (50 µm to 100 µm X 1
µm). Therefore, it is easy to focus on to a small spot with optics. It can be used for various applications such as
pumping of solid lasers, printers, medical instruments etc.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2006 Hamamatsu Photonics K.K.
CW LASER DIODES L10452 , L10451 , L8763 , L8828 SERIES
ABSOLUTE MAXIMUM RATINGS (Top(c) = 25 °C)
Value
Symbol
Unit
Parameter
L10452
0.6
L10451
1.2
L8828
2.2
L8763
1.2
Φe
Vr
W
V
Radiant Flux
Reverse Voltage
2
Top(c)
Tstg
°C
°C
Operating Temperature
Storage Temperature
0 to +30
-30 to +80
CHARACTERISTICS (Top(c) = 25 °C)
Value
L10451
1.2
Parameter
Symbol
Unit
Conditions
L8763
1.2
L8828
L10452
A
nm
Operating Current
Iop
λp
∆λ
Vop
-
2.4
L10452 Φe = 0.5 W
L10451 Φe = 1 W
L8763 Φe = 1 W
L8828 Φe = 2 W
Value at designing
0.65
Peak Emission Wavelength
Spectral Radiation Half Bandwidth
Operating Voltage
808 ± ±3 , 808 ± ±10 *1
nm
2
2
V
µm
Emitting Area Size
Horizontal
100 X 1
50 X 1
100 X 1
0.6
50 X 1
0.15
degree
degree
A
θ//
θ⊥
8
Beam Spread Angle
Vertical
FWHM
32
I
0.35
0.35
Lasing Threshold Current
th
-
*1
Tolerance of peak emission wavelength can be selected from +/- 3nm and +/- 10nm for every type of laser diodes listed above. For its details, see the table of
SUFFIX in the next page.
Other laser diodes of different peak emission wavelength are available, such as 830nm, 940nm and 980nm. Contact your local representative for more information.
Figure 1: Radiant Flux vs. Forward Current (Typ.)
Figure 2: Emission Spectrum (Typ.)
( Top(c) = 25 °C )
( Top(c) = 25 °C )
2.5
100
L8828
2.0
80
60
1.5
L8763
L10451
1.0
40
20
L10452
0.5
0
0
804
806
808
810
812
0
0.5
1.0
1.5
2.0
2.5
Forward Current If (A)
Wavelength (nm)
Figure 3: Directivity (Example from Measurement
)
(Top(c) = 25 °C )
100
Vertical
Direction
Vertical
Direction
Horizontal Horizontal
Direction
Direction
80
Top View Side View
Side View
Top View
Horizontal
Direction
Vertical
Direction
60
40
Top View
Top View
20
0
40
30
20
10
0
10
20
30
40
Angle (degree)
SUFFIX / DIMENSIONAL OUTLINE (Unit : mm)
Suffix
Parameter
L
####-42
L
####-06
L
####-62
808 10
Side-out OHS
L
####-07
L
####-72
L
####
-
04
Peak Emission Wavelength (nm)
Package
808 10
808
3
808
3
808 10
808
3
φ 9.0 CD
Head-out OHS
Dimensional Outline
* φ9.0CD package is not available with 2W type L8288 series.
Pigtailed type is available as custom option. Contact your local representative for details.
Output
+0
Glass Window
LD Chip
φ9.0
-0.1
φ 9.0 CD Package
φ5.7 0.2
φ2.8 0.3
φ0.45
φ
2.54
1.0
Anode (Case)
(Connection)
L10452-04 , L10451-04 , L8763-04
L10452-42 , L10451-42 , L8763-42
Cathode
NC
Anode
Cathode
Back Output
Side-out OHS Package
Output
1.8
LD Chip
Cathode Lead
10
2.4
5.8
(Connection)
L10452-06 , L10451-06 , L8763-06 , L8828-06
L10452-62 , L10451-62 , L8763-62 , L8828-62
Anode
Cathode
Isolator
6
Anode Block
Head-out OHS Package
Isolator
LD Chip
5.0
Output
2.0
(Connection)
Back
Output
Cathode Lead
Anode Block
L10452-07 , L10451-07 , L8763-07 , L8828-07
L10452-72 , L10451-72 , L8763-72 , L8828-72
φ2.2
Anode
Cathode
6.0
CW LASER DIODES L10452 , L10451 , L8763 , L8828 SERIES
Handling precautions & instructions
1. Absolute maximum ratings
When LDs are driven exceeding its absolute maximum ratings, it will be broken instantly or it leads to degradation of performance &
reliability. Please be careful not to exceed absolute maximum ratings even only a moment. The absolute maximum ratings in this
datasheet are specified based on case temperature at 25 °C. When the operating temperature is higher, the radiant output power &
dissipation will be reduced and it affects other characteristics. When designing the operating circuitry for LDs, please surely take
absolute maximum ratings into account.
2. Protection of electrostatic discharge sensitive (ESDS) devices
The LDs may be damaged or its performance may deteriorate due to such factors as electric field, electrostatic discharges (ESD), surge
voltage, leakage voltage etc. As a countermeasure against ESD, the device, operator, work place and jigs must all be set at the same
electric potential. When handling LDs, please wear conductive finger-cap. And please take following countermeasures ;
(1) Install protection circuit for excess voltage, reverse voltage, surge voltage into power supply, measuring instrument etc.
(2) When using soldering iron, protect LDs from leakage current & electrostatic discharge from soldering iron bit.
(3) Conductive sheet, electrically grounded through 1Mohm resistor should be laid on both the work table and the floor of the working
area. In order to protect the device from ESD which accumulate on the operator or the operator’s clothes, ground electrically through
1Mohm resistor and wear a wrist strap etc.
(4) Goods like parts, container to contact / approach to LDs should be materials which is taken a countermeasures for ESD.
3. Protection for stain, stress, external damage, etc.
The LDs whose suffix -06 & -07 are bare type product, vital & fragile part is naked. Dusts, expiration, finger print, sputum, condensation
bending, chip off of LD chip, re-forming of wire may leads to degradation of performance of the LDs. Please unpack, keep, handle,
operate, drive in air-conditioned clean room so that the LDs are keep away from dust & condensation. When handling, please take
enough care not to drop, not to stain any part of LDs. When dropped or stained, do not use it.
4. Heat dissipation
Reliability of LDs is deeply correlated with junction temperature. Under higher operating temperature, the reliability deteriorates sooner.
Heat dissipating device (material: Aluminum, Copper) should be attached to the base of LDs, and cooling devices (air, water, peltier etc.)
should be operate with the LDs in order to dissipate the heat from the LDs, so that the operating temperature is kept within the absolute
maximum ratings.
5. Safety for operators and users
These LDs emit invisible laser radiation. It’s classified into Class 4 according to the laser product standards of the IEC 60825-1 (Safety
of laser products Part 1: Equipment classification, requirements and user’s guide) and/or ANSI Z136.1 (American National Standard for
Safe Use of Lasers) etc. Direct or reflected laser beam from these LDs may damage eyes or skin by being absorbed by cells. In the
worst case, it leads to burn or loss of eyesight. The operator must not stare the emitting area of LDs, must avoid direct exposure to the
laser beam. Wear eye-protectors (glasses or goggles) against laser radiation while operating a device. Please provide adequate
information to the end-user of its classification, performances and warnings of the products using these LDs, defying the regulations of
IEC 60825-1 etc.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION
MAXIMUM OUTPUT PULSE DURATION WAVELENGTH
CLASS
4 LASER PRODUCT IEC 60825-1:2001
CLASS 4 LASER PRODUCT
Warning label
Explanatory label
http://www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Laser Group, Sales Dept.
5000, Hirakuchi, Hamamatsu City, Shizuoka, 434-8601, Japan, Telephone: (81)53-584-0227, Fax: (81)53-584-0228, E-mail: laser-g@lsr.hpk.co.jp
U.S.A.: Hamamatsu Corporation:360 Foothill Road, P.O. BOX 6910, Bridgewater, N.J. 08807-0910, U.S.A.Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658, E-mail: info@hamamatsu.de
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33(1) 69 53 71 00, Fax: 33(1) 69 53 71 10, E-mail: infos@hamamatsu.fr
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44)1707-294888, Fax: (44)1707-325777, E-mail: info@hamamatsu.co.uk
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 Solna, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01, E-mail: info@hamamatsu.se
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741, E-mail: info@hamamatsu.it
Cat. No. LLD1010E05
DEC. 2006
Printed in Japan
相关型号:
©2020 ICPDF网 联系我们和版权申明