L7684_06 [HAMAMATSU]
60 W XENON FLASH LAMP SERIES BUILT-IN REFLECTIVE MIRROR; 60瓦氙灯系列内置反光镜型号: | L7684_06 |
厂家: | HAMAMATSU CORPORATION |
描述: | 60 W XENON FLASH LAMP SERIES BUILT-IN REFLECTIVE MIRROR |
文件: | 总4页 (文件大小:160K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
60 W XENON FLASH LAMP SERIES
BUILT-IN REFLECTIVE MIRROR
L7684, L7685/L6604, L6605
FEATURES
High Stability: Fluctuation (p-p) 3 % Max.
High Input Energy: 1 J (per one flash)
Long Life: 8 × 107 flashes Min.
Short Arc: 3 mm
Spectral Distribution: 190 nm to 2000 nm (Sapphire glass window type)
High Repetition Rate Meeting TV rate: 60 Hz
Short flash pulse-width (FWHM): 2.90 µs (at 2 µF, 1000 V)
Built-in Reflective Mirror/1.5 Times Brighter (L7684, L7685)
TLSXF0105
APPLICATIONS
Stroboscope for FA High Speed Image Processing
Industrial Stroboscope
Pollution Analysis
TLSXF0103
CHARACTERISTICS
Parameter
L7684
L6604
L7685
L6605
Unit
Borosilicate Glass
240 to 2000
Window Material
Single Crystal Sapphire Glass
190 to 2000
Spectral Distribution
nm
Reflective Mirror
Built-in
—
Built-in
—
V
V
Operating Voltage
300 to 1000
Recommended Operating Voltage
Trigger Voltage
700 to 1000
5 to 10
0.22
1
kV
µF
J
Trigger Capacitor Value
a
Maximum Average Input Energy (single)
b
Maximum Average Input (continuous)
60
W
Arc Length
mm
Hz
3
c
Maximum Repetition Rate
g
60
3
Output Fluctuation (p-p)
% Max.
d
8 × 107
E6647
Guaranteed Life (number of flashes)
flashes Min.
Applicable Trigger Socket
Applicable Power Supply
Applicable Cooling Jacket
a
e
C6096
f
E6611
NOTE: Average input energy (E) is calculated by the below formula.
E = 1/2 CV2
E: Average input energy (J)
C: Main discharge capacitor value (F)
V: Main discharge voltage (V dc)
b
Average Input(W) is calculated by the below formula.
W = E × f f: Repetition frequency (repetition rate)
c
d
e
f
g
At 1 J/flash (60 W) input. Maximum 100 Hz operation is possible with keeping average input 60 W or lower.
At 1 J/flash input energy (60 W) with using the cooling jacket of E6611.
It is necessary to have an additional external capacitor E7289-02 for 60 W input, when 1 J/flash input energy is needed.
It has to be used for the operation more than 15 W input.
Measured with supply voltage of 1000 V, main discharge capacitir of 2 µF and repetition rate of 10 Hz.
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2006 Hamamatsu Photonics K.K
60 W XENON FLASH LAMP SERIES
Figure 1: Spectral Distribution
Figure 2: Flash Pulse Waveforms (L6604, L6605)
2 TLSXB0104EA
100 TLSXB0084EA
60 W Xenon Flash Lamp Buit-in Reflective Mirror L7685
1.8
1.6
1.4
(1 J: 2 µF/1 kV)
60 W Xenon Flash Lamp L6605 (1 J: 2 µF/1 kV)
1 J/flash
80
60
FWHM
2.90 µs
1.2
1
0.15 J/flash
40
0.8
0.6
FWHM
1.75 µs
20
0.4
0.2
0
0
200
300
400
500
600
700
800
WAVELENGTH (nm)
TIME (2 µs/div.)
Figure 4: Dimensional Outline (Unit: mm)
Figure 3: Life Characteristics
(Built-in Reflective Mirror)
L7684, L7685
TLSXB0083EC
100
34.8 0.5
14.3 0.15
OUTPUT WINDOW
80
60
40
20
PIN CONNECTION
(BOTTOM VIEW)
REFLECTIVE
MIRROR
28.9 0.3
3
ANODE
1
TRIGGER PROBE
TRIGGER PROBE
2
3
5
SPARKER
4
CATHODE
GUARANTEED LIFE
0
0
2 × 107
4 × 107
6 × 107
(300)
8 × 107
(400)
1 × 108
(500)
(100)
(200)
TLSXA0082EA
NUMBER OF FLASHES
L6604, L6605
*( ) OPERATING TIME [h]
34.8 0.5
OUTPUT WINDOW
MAIN DISCHARGE VOLTAGE: 1 kV
MAIN DISCHARGE CAPACITOR: 2 µF
REPETITION RATE: 60 Hz
14.3 0.15
INPUT ENERGY: 1 J / FLASH
The life end is defined as the time when the radiant intensity falls to
50 % of its initial value or when the output flutuation exceeds 3 %.
PIN CONNECTION
(BOTTOM VIEW)
28.9 0.3
3
ANODE
1
TRIGGER PROBE
TRIGGER PROBE
2
3
5
SPARKER
4
CATHODE
TLSXA0049EC
RELATED PRODUCTS
Trigger Socket E6647
In order to operate a Xenon flash lamp, it is necessary to supply the prescribed high voltage between anode and
cathode, and to trigger probes. To facilitate the above operation, the trigger socket consists of high voltage
transformer and voltage divider resistors and capacitors chain to supply the appropriate pulse voltage to each
electrode.
As E6647 radiates heat from its metal parts during the operation due to the input energy, it is recommended to
use a cooling fan to keep the surface temperature of the metal parts at less than 50 °C.
Dimensional Outline (Unit: mm)
14.8 0.1
METAL
RED : MAIN DISCHAGE VOLTAGE
WHITE : TRIGGER VOLTAGE
BLACK : GND (MAIN)
BROWN : GND (TRIGGER)
5.5
73.5 2.0
500 20
28.5 1.0
TLSXA0050EB
* Changing the length of the trigger socket cable vavies the current flowing through
the lamp so the lamp might fail to meet its required specifications. Use the cable length as shipped.
Power Supply C6096
C6096 has large capability to operate the lamp stable in spite of its compact dimensions. When 1 flash input
energy becomes over 0.05 J, it is necessary to have an additional external capacitor E7289-02 (option).
Specifications
Dimensional Outline (Unit: mm)
108 2
174 3
Parameter
Output Voltage
Description/Value
300 V to 1000 V
60 W Max.
h
i
(dc)
Main
Power
Supply
Output Capacity
Stability
1 % Max.
j
0.1 µF
180 V Typ.
Main Supply Capacitor
Trigger Output Voltage
Trigger Capacitor
Trigger Type
Trigger
Section
2-M3
0.22 µF
100.0 0.5
2-M3
Internal / External
10 Hz to 100 Hz
360 Ω
Repetition Rate k
Trigger
Input
Section
Trigger Input Impedance
Input Waveform m
Input Voltage
Rectangular Waveform
5 V
24 V 1.2 V
90 W
Input Voltage (dc)
Power Consumption
Cooling
Not Required
Approx. 550 g
Weight
h
The range of 700 V to 1000 V is used for the operation
of 60 W Xenon flash lamp series.
NOTE:
i In the case of connects temperature sensor lead lines
from the cooling jacket, the output voltage becomes 0 V
when the temperature sensor turns on.
80.0 0.5
14
TLSXA0051EA
j
When 1 flash input energy becomes over 0.05 J, it is
necessary to have an additional external capacitor
E7289-02 (option).
k Don’t use beyond 60 Hz at the operation of 60 W input.
m
A trigger pulse voltage is supplied to each electrode at
the same time as an input trigger signal rise.
60 W XENON FLASH LAMP SERIES
Cooling Jacket E6611
This cooling jacket is exclusively designed for 60 W Xenon flash lamps will keep the temperature of the lamp and
electric parts such as the trigger socket at less than maximum ratings and maintain at even temperature by a built-in
cooling fan, and offers the stable operation of the lamp. It has to be used for the operation of more than 15 W input.
Dimensional Outline (Unit:mm)
* The temperature sensor is for the protection of a lamp, a
trigger socket and a power supply, when it detects an ab-
nornal high temperature due to out of work with the cool-
ing fan. When lead lines of temperature sensor are con-
nected to the protection circuit terminal of C6096 exclu-
sive power supply, the power supply will stop its opera-
tion.
35.0 0.5
65.5 0.5
TEMPERATURE SENSOR*
SETTING HOLES 2-M4 × P0.7
LAMP TRIGGER SOCKET
TRIGGER SOCKET
SHIELD CABLE
COOLING FAN (RATING : 24 V, 0.1 A dc)
RED: Cooling fan input voltage (+24 V)
BLACK: Cooling fan GND
YELLOW: Temperature sensor
BLUE: Temperature sensor
23.5 1.5
175 3
TLSXA0052ED
Light-Guides
Dimensional Outline (Unit: mm)
Light-guides are effective to guide the output light into a
place where does not allow to direct irradiation due to its
construction or to plural places simultaneously. A short arc of
60 W Xenon flash lamps allows the light into the light-guides
effectively. As the standard option, two types of light guide
are available from us upon your application. Please refer to
below table. The light-guides holder will be included for order
of the cooling jacket E6611.
1000
30
25
60
10
33
SUS FLEXIBLE TUBE
10
Transmittance
wavelength
Output
diameter
Type No.
A2873
Material
Length
1 m
220 nm to 1300 nm
380 nm to 1300 nm
Quartz glass fiber
5 mm
5 mm
TLSXA0062EB
A7432
Compound glass fiber
1 m
External Main Discharge Capacitor E7289-02
Dimensional Outline (Unit: mm)
180
3
320 20
100
3
The exclusive main discharge capacitor (2 µF) for 60 W
(1 J/Flash, 60 Hz) inputs the operation of 60 W Xenon flash
lamp series. It allows to operate safely by easy connection
with a power supply.
GND
TERMINAL
2-M3
78
1
TLSXA0053ED
Warranty
The warranty period will be one year following the date of shipment or specified life time whichever comes first. The area of warranty is
Iimited to replacement of the faulty lamp. Faults resulting from natural disasters and improper usage will also be excluded from warranty.
WEB SITE www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Electron Tube Division
314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se
TLSX1029E04
FEB. 2006 IP
Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it
©2020 ICPDF网 联系我们和版权申明