KGV-72 [HARRIS]

TYPE-1 PROGRAMMABLE ENCRYPTION DEVICE; TYPE- 1可编程加密设备
KGV-72
型号: KGV-72
厂家: HARRIS CORPORATION    HARRIS CORPORATION
描述:

TYPE-1 PROGRAMMABLE ENCRYPTION DEVICE
TYPE- 1可编程加密设备

文件: 总2页 (文件大小:2671K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
®
assuredcommunications  
KGV-72  
TYPE-1 PROGRAMMABLE  
ENCRYPTION DEVICE  
The KGV-72 Type-1 Programmable Encryption Device features a modular  
architecture with the programmability and scalability to accommodate a wide  
range of link and Internet Protocol (IP) in-line network encryption applications.  
Network-centric,  
programmable link encryptor  
optimized for secure force  
tracking  
Developed as part of the Force XXI Battle Command, Brigade-and-Below (FBCB2)  
Type-1 Encryption Device (T1ED) Program, the KGV-72 is a high-grade security  
solution that is compatible with existing and future Blue Force Tracking (BFT)  
terminals and transceivers. Its flexible, software-upgradeable design supports  
both legacy FBCB2 L-band/BLOS link communications and evolving IP standards.  
The KGV-72 is secured with the programmable National Security Agency  
(NSA)-certified Sierra II™ encryption module, which meets all requirements of the  
NSA’s Cryptographic Modernization initiative. Programming of Suite-A and Suite-B  
algorithms is also supported, allowing the KGV-72 to be used for a wide range of  
in-line network applications. The KGV-72 operates seamlessly with installed FBCB2  
remote computers and provides high-grade traffic data encryption.  
For easy operation, the KGV-72 front panel features only a single knob and LED.  
Tested to MIL-STD-810F requirements, the KGV-72 is a military-rugged encryption  
device in a compact, form factor package ideal for secure force tracking applications.  
Specifications for the KGV-72  
General  
Interfaces  
Programmable Type-1 encryption  
for applications such as Force  
Tracking  
Front panel (single knob and  
single LED) or remote control  
via attached FBCB2 computer  
Application  
Control & Indicators  
Certification  
NSA Type-1  
Power  
Fill  
28 volt nominal  
DS-101  
Both Red and Black key fill  
Stores up to 125 TEKs and KEKs  
Key Management  
10/100 Ethernet; RS-422  
(configurable to rates of 9.6, 19.2,  
38.4, 57.6, 76.8, and 115.2 kbps)  
Red Data  
Physical  
4.5 x 7.5 x 3 in. (11.4 x 19.1 x  
7.6 cm), not including cable dress  
Size  
Black Data  
Same rates as Red Data  
3 lbs. (1.4 kg), not  
including cables  
Weight  
Power  
Mounting screws (4) and provisions  
for a Series 200 lock included  
Optional mounting available  
for CCI equipment  
Power Consumption  
Voltage  
6 watts (typical)  
Mounting  
28 volt vehicles nominal  
Input Range 10–30 volts  
Over/Under/Reverse protection per  
MIL-STD-1275  
Environmental  
Durability  
MIL–STD-810F  
-40° to +70° C  
Type ½ AA 14250C: NSN 6135-  
01-525-9943  
Hold-Up Battery  
Operating & Storage  
Temperature  
6-pin fill compatible with  
AN/CYZ10 and SKL  
MS3114E14-19S  
Red/Black connector (2)  
Mounting holes (4)  
MS3114E12-3S  
Power connector  
0.4 A  
Hold-Up Battery  
Lock provision  
Based on the embedment of the  
Harris Sierra II module  
LED  
On/Off/Fill/Zeroize  
Package Dimensions: 2.75 x 4.5 x 7.5 inches  
Weight: 3 lbs.  
RF Communications | 1680 University Ave. | Rochester, NY USA 14610 | 585.244.5830 | www.harris.com  
Get quotes real-time at eHarris. Order parts online at: https://premier.harris.com/rfcommsales  
These item(s)/technical data have been reviewed in accordance with the international traffic in arms regulations, 22 CFR 12 – 130, and the export administration regulations, 15 CFR 730 – 774, and  
determined by the export control department to be rated EAR99. General prohibitions apply. Specifications subject to change without notice. Copyright © 2009 Harris Corporation 03/09 DS-431  

相关型号:

KGV120

Rundsteckverbinder mit Schraubverschluss nach IEC 60130-9, IP 40
LUMBERG

KGV30

Rundsteckverbinder mit Schraubverschluss nach IEC 60130-9, IP 40
LUMBERG

KGV40

Rundsteckverbinder mit Schraubverschluss nach IEC 60130-9, IP 40
LUMBERG

KGV50

Rundsteckverbinder mit Schraubverschluss nach IEC 60130-9, IP 40
LUMBERG

KGV50-6

Rundsteckverbinder mit Schraubverschluss nach IEC 60130-9, IP 40
LUMBERG

KGV50/6

Circular Connector, 5 Contact(s), Zinc Alloy, Female, Solder Terminal, Socket
LUMBERG

KGV60

Rundsteckverbinder mit Schraubverschluss nach IEC 60130-9, IP 40
LUMBERG

KGV70

Rundsteckverbinder mit Schraubverschluss nach IEC 60130-9, IP 40
LUMBERG

KGV71

Rundsteckverbinder mit Schraubverschluss nach IEC 60130-9, IP 40
LUMBERG

KGV80

Rundsteckverbinder mit Schraubverschluss nach IEC 60130-9, IP 40
LUMBERG

KGV81

Rundsteckverbinder mit Schraubverschluss nach IEC 60130-9, IP 40
LUMBERG

KGW2.0

High-Energe Switching Spark Tubes
LEIDITECH