15-75-836-2701-333 [HARTING]
har-flex Hybrid M ang 836 THR PL1Sample;型号: | 15-75-836-2701-333 |
厂家: | HARTING Technology Group |
描述: | har-flex Hybrid M ang 836 THR PL1Sample |
文件: | 总3页 (文件大小:760K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Product data sheet
15 75 836 2701 333
har-flex Hybrid M ang 8+36 THR PL1Sample
har-flex Hybrid M ang 8+36 THR PL1Sample
Part number
15 75 836 2701 333
har-flex Hybrid M ang 8+36 THR
PL1Sample
Specification
HARTING eCatalogue https://b2b.harting.com/15758362701333
Image is for illustration purposes only. Please refer to product description.
Identification
Category
Series
Connectors
®
har-flex
Identification
Element
Hybrid
Male connector
Angled
Description of the contact
Features
Termination method of power contacts: THR
Version
Termination method
Reflow soldering termination (SMT)
Motherboard to daughtercard
Extender card
Connection type
Number of contacts
44
Number of signal contacts
Number of power contacts
Pack contents
36
8
Sample
Technical characteristics
1.27 mm
2.54 mm
Contact spacing (termination side)
1.27 mm
2.54 mm
Contact spacing (mating side)
Rated voltage
acc. to IEC 60664-1
50 V AC
120 V DC
Rated voltage
Page 1 / 3 | Creation date 2021-07-17 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to
the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,
conformity with applicable laws and directives, as well as for the electrical safety in the particular application.
HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany
Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com
Product data sheet
15 75 836 2701 333
har-flex Hybrid M ang 8+36 THR PL1Sample
Technical characteristics
Rated impulse voltage
Pollution degree
1.5 kV
2
≥0.4 mm Signal contacts
Clearance distance
≥0.94 mm Power contacts
≥0.7 mm Signal to power contacts
≥0.4 mm PCB: Signal contacts
≥0.94 mm PCB: Power contacts
≥0.7 mm PCB: Signal to power contacts
≥0.4 mm Connector: Signal contacts
≥1.89 mm Connector: Power contacts
≥1.99 mm Connector: Signal to power contacts
Creepage distance
Insulation resistance
10
>10
Ω
Contact resistance
Limiting temperature
Performance level
Mating cycles
≤25 mΩ
-55 ... +125 °C
1
≥500
0.5 kV Signal
0.84 kV Signal / Power
0.84 kV Power / Power
Test voltage U
r.m.s.
Isolation group
IIIa (175 ≤ CTI < 400)
Moisture Sensitivity Level (MSL)
Process Sensitivity Level (PSL)
Coplanarity of contacts
1 acc. to ECA/IPC/JEDEC J-STD-020D
R0 acc. to ECA/IPC/JEDEC J-STD-020D
0.12 mm
Material properties
Material (insert)
Liquid crystal polymer (LCP)
Black
Colour (insert)
Material (contacts)
Copper alloy
Au over Pd/Ni Mating side
Tin plated Termination side
Surface (contacts)
Material flammability class acc. to UL 94
V-0
Commercial data
Packaging size
1
Country of origin
China
85366990
European customs tariff number
Page 2 / 3 | Creation date 2021-07-17 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to
the user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,
conformity with applicable laws and directives, as well as for the electrical safety in the particular application.
HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany
Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com
Product data sheet
15 75 836 2701 333
har-flex Hybrid M ang 8+36 THR PL1Sample
Commercial data
eCl@ss
27460201 PCB connector (board connector)
Current carrying capacity
The current carrying capacity of the connectors is
limited by the thermal load capability of the contact
element material including the connections and the
insulating parts. The derating curve is therefore
valid for currents which flow constantly (non-
intermittent) through each contact element of the
connector evenly, without exceeding the allowed
maximum temperature.
Measuring and testing techniques acc. to IEC
60512-5-2
Ambient temperature (°C)
Derating curve 80%
Page 3 / 3 | Creation date 2021-07-17 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to the
user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,
conformity with applicable laws and directives, as well as for the electrical safety in the particular application.
HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany
Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com
相关型号:
15-80-0061
2.54mm (.100) Pitch C-Grid® Header, Through Hole without Peg, Dual Row, Vertical, Shrouded, High Temperature, 6 Circuits, Tin (Sn) Plating
MOLEX
15-80-0063
2.54mm (.100) Pitch C-Grid® Header, Through Hole without Peg, Dual Row, Vertical, Shrouded, High Temperature, 6 Circuits, 0.38μm (15μ) Gold (Au) Selective Plating
MOLEX
15-80-0065
2.54mm (.100) Pitch C-Grid® Header, Through Hole without Peg, Dual Row, Vertical, Shrouded, High Temperature, 6 Circuits, 0.76μm (30μ) Gold (Au) Selective Plating
MOLEX
15-80-0067
2.54mm (.100) Pitch C-Grid® Header, Through Hole without Peg, Dual Row, Vertical, Shrouded, High Temperature, 6 Circuits, Tin (Sn) Plating
MOLEX
15-80-0069
2.54mm (.100) Pitch C-Grid® Header, Through Hole without Peg, Dual Row, Vertical, Shrouded, High Temperature, 6 Circuits, 0.38μm (15μ) Gold, (Au) Selective Plating
MOLEX
15-80-0081
2.54mm (.100) Pitch C-Grid® Header, Through Hole without Peg, Dual Row, Vertical, Shrouded, High Temperature, 8 Circuits, Tin (Sn) Plating
MOLEX
15-80-0083
2.54mm (.100) Pitch C-Grid® Header, Through Hole without Peg, Dual Row, Vertical, Shrouded, High Temperature, 8 Circuits, 0.38μm (15μ) Gold (Au) Selective Plating
MOLEX
15-80-0085
2.54mm (.100) Pitch C-Grid® Header, Through Hole without Peg, Dual Row, Vertical, Shrouded, High Temperature, 8 Circuits, 0.76μm (30μ) Gold (Au) Selective Plating
MOLEX
15-80-0087
2.54mm (.100) Pitch C-Grid® Header, Through Hole without Peg, Dual Row, Vertical, Shrouded, High Temperature, 8 Circuits, Tin (Sn) Plating
MOLEX
15-80-0089
2.54mm (.100) Pitch C-Grid® Header, Through Hole without Peg, Dual Row, Vertical, Shrouded, High Temperature, 8 Circuits, 0.38μm (15μ) Gold, (Au) Selective Plating
MOLEX
15-80-0101
2.54mm (.100) Pitch C-Grid® Header, Through Hole without Peg, Dual Row, Vertical, Shrouded, High Temperature, 10 Circuits, Tin (Sn) Plating
MOLEX
15-80-0103
2.54mm (.100) Pitch C-Grid® Header, Through Hole without Peg, Dual Row, Vertical Shrouded, High Temperature, 10 Circuits
MOLEX
©2020 ICPDF网 联系我们和版权申明