HDM30-48B-S03
更新时间：2024-09-18 07:26:32
品牌：HITRON
描述：PCB-MOUNT DC-DC CONVERTER ENCAPSULATED MODULES 30 WATTS SINGLE OUTPUT
概述
数据手册HDM30-48B-S03 概述
PCB-MOUNT DC-DC CONVERTER ENCAPSULATED MODULES 30 WATTS SINGLE OUTPUT 印刷电路板安装型DC-DC转换器的密封模块30瓦单路输出
HDM30-48B-S03 数据手册
通过下载HDM30-48B-S03数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载H HiTRON
PCB-MOUNT DC-DC CONVERTER ENCAPSULATED MODULES
30 WATTS SINGLE OUTPUT HDM30-S SERIES
FEATURES:
ꢀ SINGLE OUTPUT
ꢀ WIDE 4:1 & 2:1 INPUT RANGE
ꢀ 30W ISOLATED OUTPUT
ꢀ SIX-SIDED SHIELD
SPECIFICATION
INPUT SPECIFICATION
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Voltage Accuracy: Main O/P ±2.0% typical.
Line Regulation: Various with input & output voltages.
±0.5% typical.
Load Regulation: Various with output voltages.
±1.0% typical.
Noise & Ripple: Typical 100mV for 3.3V/5.0V &
1.0% for others peak to peak.
Input Range: Wide 4:1 & 2:1 DC input range.
See Ratings Chart.
Input Voltage: Nominal 12/24/48Vdc.
Input Current: Various with input range and load.
See Ratings Chart.
Input Fuse: Use external fuse.
Input Filter: Pi-Network.
Overvoltage Shutdown: Optional. Factory set.
Undervoltage Shutdown: 8Vdc.
Isolation Resistor: 1,000 Mega Ohms.
Isolation Voltage: 1,500Vdc.
EMI: Six-sided metal shielding.
Remote On/Off: TTL/CMOS-Compatible Input Control.
(Voltage refer to the –Input)
OVP: Built-in on main output.
Overload Protection (OLP):
Positive Logic version for Standard set up:
ON(Enable)=Open(or 2.5-5.0Vdc above-Vin).
OFF(Disable)=Short(or 0-0.8Vdc above-Vin).
Negative Logic version option available by adding a
“N” suffix to the end of Model #.
Fully protected against output overload and short circuit.
OLP set at about 125-150% rating output wattage.
Consult the factory for OLP setting.
GENERAL SPECIFICATION
Efficiency: 81% typical various with input.
Switching Frequency: Fixed frequency 100K Hz.
Circuit Topology: Forward Circuit.
Transient Response: Peak deviation 200mV,
Recovery time < 3mSec.@ 25% step load change.
Case: Black coated copper with non-conductive
metal base.
Operating Temperature: -10 to +70°C range.
0°C to +60°C full load without derating.
From +60°C, derating linearly to half load @+70°C.
(Refer to Derating Chart.)
Temperature: -20°C to +85°C.
Temperature Coefficient: 0.02% /°C.
Cooling: Convection cooling up to +60°C @ full load.
At least 100LFM moving air is recommended for
full load > +60°C in a confined area.
Power Density: 10 Watts. / Cubic inch.
MTBF: Type 1,000,000 hours to Mil. Std.217, 25°C.
Humidity: Up to 95%RH, Non-condensing.
Commercial Grade only.
NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified.
(2) Line Regulation measured from High to Low Lines at full load.
(3) Load Regulation measured from Full Load to 1/2 Full Load at nominal input.
(4) Correct fuse size by calculating the max. DC current drain at low Line input & Load and then adding 20-25％for the desired fuse size.
Due to requests in market and advances in technology, specifications subject to change without notice.
-27-
INPUT/OUTPUT & VOLTAGE/CURRENT RATINGS CHART
SINGLE OUTPUT
INPUT
Vdc
INPUT CURRENT
OUTPUT
OUTPUT
VO1(A)
CASE
SIZE
MODEL NO.
N. L. (mA) F.L.
VO1(Vdc) @★
30
30
30
30
30
30
20
20
20
20
20
20
15
15
15
15
15
15
30
30
30
30
30
30
20
20
20
20
20
20
2300
2700
2650
2750
2800
3100
1150
1350
1325
1375
1400
1550
575
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
HDM30-12B-S03
HDM30-12B-S05
HDM30-12B-S09
HDM30-12B-S12
HDM30-12B-S15
HDM30-12B-S24
HDM30-24B-S03
HDM30-24B-S05
HDM30-24B-S09
HDM30-24B-S12
HDM30-24B-S15
HDM30-24B-S24
HDM30-48B-S03
HDM30-48B-S05
HDM30-48B-S09
HDM30-48B-S12
HDM30-48B-S15
HDM30-48B-S24
HDM30-24D-S03
HDM30-24D-S05
HDM30-24D-S09
HDM30-24D-S12
HDM30-24D-S15
HDM30-24D-S24
HDM30-48D-S03
HDM30-48D-S05
HDM30-48D-S09
HDM30-48D-S12
HDM30-48D-S15
HDM30-48D-S24
9.0- 18.0
9.0- 18.0
9.0- 18.0
9.0- 18.0
9.0- 18.0
9.0- 18.0
18.0- 36.0
18.0- 36.0
18.0- 36.0
18.0- 36.0
18.0- 36.0
18.0- 36.0
36.0- 72.0
36.0- 72.0
36.0- 72.0
36.0- 72.0
36.0- 72.0
36.0- 72.0
9.0- 36.0
9.0- 36.0
9.0- 36.0
9.0- 36.0
9.0- 36.0
9.0- 36.0
20.0- 72.0
20.0- 72.0
20.0- 72.0
20.0- 72.0
20.0- 72.0
20.0- 72.0
3.3V
5.0V
6.40A
5.00A
2.80A
2.20A
1.80A
1.25A
6.40A
5.00A
2.80A
2.20A
1.80A
1.25A
6.40A
5.00A
2.80A
2.20A
1.80A
1.25A
6.40A
5.00A
2.80A
2.20A
1.80A
1.25A
6.40A
5.00A
2.80A
2.20A
1.80A
1.25A
9.0V
12.0V
15.0V
24.0V
3.3V
5.0V
9.0V
12.0V
15.0V
24.0V
3.3V
675
5.0V
662
9.0V
687
12.0V
15.0V
24.0V
3.3V
700
775
1175
1375
1350
1400
1425
1575
587
5.0V
9.0V
12.0V
15.0V
24.0V
3.3V
687
5.0V
675
9.0V
700
12.0V
15.0V
24.0V
712
787
Symbols: "★" OVP built-in.
"@" Adjustable.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 156.0g (5.6 Oz.)
PIN ASSIGNMENT
PIN NO. SINGLE
PIN #1. Remote ON/OFF
PIN #2. +INPUT
PIN #3. -INPUT/-Vin
PIN #4. NO PIN
PIN #5. NO PIN
PIN #6. OUTPUT TRIM
PIN #7. NO PIN
PIN #8. +VO1
PIN #9. DC-COM
PIN #10. NO PIN
DERATING CHART
CASE SIZE: DM2A
-28-
H HiTRON
PCB-MOUNT DC-DC CONVERTER ENCAPSULATED MODULES
30 WATTS DUAL OUTPUT HDM30-D SERIES
FEATURES:
ꢀ DUAL OUTPUT
ꢀ WIDE 4:1 & 2:1 INPUT RANGE
ꢀ 30W ISOLATED OUTPUT
ꢀ SIX-SIDED METAL SHIELD
SPECIFICATION
INPUT SPECIFICATION
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Voltage Accuracy: Main O/P ±2.0% typical.
Line Regulation: Various with input voltages.
±0.5% typical.
Load Regulation: Various with output voltages.
VO1 ±1.0% typical.
VO2 ±2.0% typical.
Noise & Ripple: 100mV for 3.3V/5.0V & 1.0% typical
for other output peak to peak.
Input Range: Wide 4:1 & 2:1 DC input range.
See Ratings Chart.
Input Voltage: Nominal 12/24/48Vdc.
Input Current: Various with input range and load.
See Ratings Chart.
Input Fuse: Use external fuse.
Input Filter: Pi-Network.
Overvoltage Shutdown: Optional. Factory set.
Undervoltage Shutdown: 8Vdc.
Isolation Resistor: 1,000 Mega Ohms.
Isolation Voltage: 1,500Vdc.
EMI: Six-sided metal shielding.
OVP: Built-in on main output.
Remote On/Off: TTL/CMOS-Compatible Input Control.
(Voltage refer to the -Input).
Adjustability: VO1 O/P may optionally be external
trimmed ±3.0% with a fixed resistors or trim-pot.
Overload Protection (OLP):
Positive Logic version for Standard set up:
ON(Enable)=Open(or 2.5-5.0Vdc above-Vin).
OFF(Disable)=Short(or 0-0.8Vdc above-Vin).
Negative Logic version option available by adding a
Fully protected against output overload and short circuit.
OLP set at about 125-150% rating output wattage.
Consult the factory for OLP setting.
“N” suffix to the end of Model #.
Remark: Logic voltage refer to –Input (-Vin)
GENERAL SPECIFICATION
Operating Temperature: -10°C to +70°C range.
Efficiency: 76- 81% typical, various with input &
output voltage.
0°C to +60°C @ full load without derating.
From +60°C, derating linearly to half load@+70°C.
Switching Frequency: Fixed frequency 100K Hz.
Circuit Topology: 100K Hz. Forward Circuit.
Transient Response: Peak deviation 200mV,
Recovery time < 3mSec. @ 25% step load change.
Case: Black coated copper with non-conductive metal base.
Power Density: 10.0 Watts. / Cubic inch.
MTBF: 1,000,000 hours to Mil. Std. 271, 25°C.
(Refer to the Derating Chart).
Temperature: -20°C to +85°C.
Temperature Coefficient: ± 0.03% /°C.
Cooling: Convection cooling up to +60°C @ full load.
At least 100LFM moving air is recommended
for F-L > +60°C in a confined area.
Humidity: Up to 95%RH, Non-condensing.
Commercial Grade only.
NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified.
(2) Line Regulation measured from High to Low Lines at full load.
(3) Load Regulation measured from Full Load to 1/2 Full Load at nominal input.
(4) Correct fuse size by calculating the max. DC current drains at low Line input & Load and then adding 20-25% for the desired fuse size.
Due to requests in market and advances in technology, specifications subject to change without notice.
-29-
INPUT/OUTPUT & VOLTAGE/CURRENT RATINGS CHART
DUAL OUTPUT
INPUT CURRENT
OUTPUT (Vdc)
+VO1@★ -VO2‖
OUTPUT (A)
INPUT
Vdc
CASE
SIZE
MODEL NO.
+VO1
-VO2
N.L.
F.L.
(mA)
30
30
30
20
20
20
20
20
20
40
40
40
30
30
30
2,670
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
HDM30-12B-D05
HDM30-12B-D12
HDM30-12B-D15
HDM30-24B-D05
HDM30-24B-D12
HDM30-24B-D15
HDM30-48B-D05
HDM30-48B-D12
HDM30-48B-D15
HDM30-24D-D05
HDM30-24D-D12
HDM30-24D-D15
HDM30-48D-D05
HDM30-48D-D12
HDM30-48D-D15
Symbols: "★" OVP built-in.
9.0- 18.0
9.0- 18.0
9.0- 18.0
18.0- 36.0
18.0- 36.0
18.0- 36.0
36.0- 72.0
36.0- 72.0
36.0- 72.0
9.0- 36.0
9.0- 36.0
9.0- 36.0
20.0- 72.0
20.0- 72.0
20.0- 72.0
+5.0V
-5.0V
2.50A
1.00A
0.83A
3.00A
1.25A
1.00A
3.00A
1.25A
1.00A
2.50A
1.00A
0.83A
3.00A
1.25A
1.00A
2.50A
1.00A
0.83A
3.00A
1.25A
1.00A
3.00A
1.25A
1.00A
2.50A
1.00A
0.83A
3.00A
1.25A
1.00A
2,500
2,590
1,560
1,525
1,525
780
+12.0V
+15.0V
+5.0V
-12.0V
-15.0V
-5.0V
+12.0V
+15.0V
+5.0V
-12.0V
-15.0V
-5.0V
763
+12.0V
+15.0V
+ 5.0V
+12.0V
+15.0V
+5.0V
-12.0V
-15.0V
- 5.0V
-12.0V
-15.0V
-5.0V
763
1,350
1,265
1,310
800
775
+12.0V
+15.0V
-12.0V
-15.0V
775
"@" Adjustable.
"‖" Double Feedback.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 156.0g (5.6 Oz.)
PIN ASSIGNMENT
PIN NO. DUAL
Remote ON/OFF
+ INPUT
-INPUT/-Vin
NO PIN
+VO1
DC-COM
-VO2
OUTPUT TRIM
NO PIN
NO PIN
PIN# 1.
PIN# 2.
PIN# 3.
PIN# 4.
PIN# 5.
PIN# 6.
PIN# 7.
PIN# 8.
PIN# 9.
PIN# 10.
DERATING CHART
CASE SIZE: DM2A
-30-
H HiTRON
PCB-MOUNT DC-DC CONVERTER ENCAPSULATED MODULES
30 WATTS TRIPLE OUTPUT HDM30-T SERIES
FEATURES:
ꢀ TRIPLE OUTPUT
ꢀ WIDE 4:1 & 2:1 INPUT RANGE
ꢀ 30W ISOLATED OUTPUT
ꢀ SIX-SIDED METAL SHIELD
SPECIFICATION
INPUT SPECIFICATION
OUTPUT SPECIFICATION
Input Range: Wide 4:1 & 2:1 DC input range.
See Ratings Chart.
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Input Voltage: Nominal 12/24/48Vdc.
Input Current: Various with input range and load.
See Ratings Chart.
Voltage Accuracy: Main O/P ±2.0% typical.
Line Regulation: Various with input voltages. ±0.5% typ.
Load Regulation: Various with output voltages.
VO1 & VO3 ±2.0% typical.
VO2 ±5.0% typical.
Noise & Ripple: 100mV for 3.3V/5.0V & 1.0% typical
Input Fuse: Use external fuse.
Input Filter: Pi-Network.
Overvoltage Shutdown: Optional. Factory set.
Undervoltage Shutdown: 8Vdc.
Isolation Resistor: 1,000 Mega Ohms.
Isolation Voltage: 1,500Vdc.
for other output peak to peak.
OVP: Built-in on main output.
EMI: Six-sided metal shielding.
Remote On/Off: TTL/CMOS-Compatible Input Control.
Positive Logic version for Standard set up:
ON(Enable)=Open(or 2.5-5.0Vdc above-Vin)
OFF(Disable)=Short(or 0-0.8Vdc above-Vin)
Negative Logic version option available by adding a
“N” suffix to the end of Model #.
Adjustability: VO1 O/P may optionally be external
trimmed ±3.0% with a fixed resistors or trim-pot.
Overload Protection (OLP):
Fully protected against output overload and short circuit.
OLP set at about 125-150% rating output wattage.
Consult the factory for OLP setting.
Remark: [Voltage refer to –Input (-Vin)].
GENERAL SPECIFICATION
Operating Temperature: -10°C to +70°C range.
Efficiency: 78-81% typical, various with input &
output voltage.
0°C to +60°C @ full load without derating.
From+60°C derating linearly to half load@+70°C.
Switching Frequency: Fixed frequency 100K Hz.
Circuit Topology: 100K Hz. Forward Circuit.
Transient Response: Peak deviation 200mV,
Recovery time < 3mSec. @ 25% step load change.
Case: Black coated copper with non-conductive metal base.
Power Density: 10.0 Watts. / Cubic inch.
MTBF: 1,000,000 hours Mil.Std.271, 25°C.
(Refer to the Derating Chart).
Storage Temperature: -20 to +85°C.
Temperature Coefficient: ± 0.03% /°C.
Cooling: Convection cooling up to +60°C @ full load.
At least 100LFM moving air is recommended for full
load > +60°C in a confined area.
Humidity: Up to 95%RH, Non-condensing.
Commercial Grade only.
NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified.
(2) Line Regulation measured from High to Low Lines at full load.
(3) Load Regulation measured from Full Load to 1/2 Full Load at nominal input.
(4) Correct fuse size by calculating the max. DC current drains at low Line input & Load and then adding 20-25% for the desired fuse size.
Due to requests in market and advances in technology, specifications subject to change without notice.
-31-
INPUT/OUTPUT & VOLTAGE/CURRENT RATINGS CHART
TRIPLE OUTPUT
INPUT CURRENT
OUTPUT (Vdc)
OUTPUT (A)
CASE
SIZE
INPUT
Vdc
MODEL NO.
N.L.
50
F.L.
(mA)
+VO1★@ +VO2†
-VO3‖ +VO1 +VO2 -VO3
2,550
2,550
2,500
1,520
1,550
1,420
760
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
DM2A
HDM30-12B-T5/12
HDM30-12B-T5/15
HDM30-12B-T5/+12,-5
HDM30-24B-T5/12
HDM30-24B-T5/15
HDM30-24B-T5/+12,-5
HDM30-48B-T5/12
HDM30-48B-T5/15
HDM30-48B-T5/+12,-5
HDM30-24D-T5/12
HDM30-24D-T5/15
HDM30-24D-T5/+12,-5
HDM30-48D-T5/12
HDM30-48D-T5/15
HDM30-48D-T5/+12,-5
Symbols: "★" OVP built-in.
9.0- 18.0
+5.0V
+5.0V
+5.0V
+5.0V
+5.0V
+5.0V
+5.0V
+5.0V
+5.0V
+5.0V
+5.0V
+5.0V
+5.0V
+5.0V
+5.0V
+12.0V
+15.0V
+12.0V
+12.0V
+15.0V
+12.0V
+12.0V
+15.0V
+12.0V
+12.0V
+15.0V
+12.0V
+12.0V
+15.0V
+12.0V
-12.0V
-15.0V
- 5.0V
-12.0V
-15.0V
- 5.0V
-12.0V
-15.0V
- 5.0V
-12.0V
-15.0V
- 5.0V
-12.0V
-15.0V
- 5.0V
2.5A
2.5A
2.5A
3.0A
3.0A
3.0A
3.0A
3.0A
3.0A
2.5A
2.5A
2.5A
3.0A
3.0A
3.0A
0.5A
0.4A
0.5A
0.6A
0.5A
0.6A
0.6A
0.5A
0.6A
0.5A
0.4A
0.5A
0.6A
0.5A
0.6A
0.5A
0.4A
1.0A
0.6A
0.5A
1.0A
0.6A
0.5A
1.0A
0.5A
0.4A
1.0A
0.6A
0.5A
1.0A
50
50
40
40
40
40
40
40
60
60
60
50
50
50
9.0- 18.0
9.0- 18.0
18.0- 36.0
18.0- 36.0
18.0- 36.0
36.0- 72.0
36.0- 72.0
36.0- 72.0
9.0- 36.0
775
710
1,325
1,325
1,300
785
9.0- 36.0
9.0- 36.0
20.0- 72.0
20.0- 72.0
20.0- 72.0
"@" Adjustable.
800
735
"‖" Double Feedback.
"†" Stacked on main O/P.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 156.0g (5.6 Oz.)
PIN ASSIGNMENT
PIN NO. TRIPLE
Remote ON/OFF
PIN# 1.
PIN# 2.
PIN# 3.
PIN# 4.
PIN# 5.
PIN# 6.
PIN# 7.
PIN# 8.
PIN# 9.
PIN# 10.
+INPUT
- INPUT/-Vin
NO PIN
+VO2
DC-COM
-VO3
+ VO1
NO PIN
OUTPUT TRIM
DERATING CHART
CASE SIZE: DM2A
-32-
HDM30-48B-S03 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| HDM30-48B-S05 | HITRON | PCB-MOUNT DC-DC CONVERTER ENCAPSULATED MODULES 30 WATTS SINGLE OUTPUT | 获取价格 |
|
| HDM30-48B-S09 | HITRON | PCB-MOUNT DC-DC CONVERTER ENCAPSULATED MODULES 30 WATTS SINGLE OUTPUT | 获取价格 |
|
| HDM30-48B-S12 | HITRON | PCB-MOUNT DC-DC CONVERTER ENCAPSULATED MODULES 30 WATTS SINGLE OUTPUT | 获取价格 |
|
| HDM30-48B-S15 | HITRON | PCB-MOUNT DC-DC CONVERTER ENCAPSULATED MODULES 30 WATTS SINGLE OUTPUT | 获取价格 |
|
| HDM30-48B-S24 | HITRON | PCB-MOUNT DC-DC CONVERTER ENCAPSULATED MODULES 30 WATTS SINGLE OUTPUT | 获取价格 |
|
| HDM30-48B-T5/+12-5 | HITRON | PCB-MOUNT DC-DC CONVERTER ENCAPSULATED MODULES 30 WATTS SINGLE OUTPUT | 获取价格 |
|
| HDM30-48B-T5/12 | HITRON | PCB-MOUNT DC-DC CONVERTER ENCAPSULATED MODULES 30 WATTS SINGLE OUTPUT | 获取价格 |
|
| HDM30-48B-T5/15 | HITRON | PCB-MOUNT DC-DC CONVERTER ENCAPSULATED MODULES 30 WATTS SINGLE OUTPUT | 获取价格 |
|
| HDM30-48D-D05 | HITRON | PCB-MOUNT DC-DC CONVERTER ENCAPSULATED MODULES 30 WATTS SINGLE OUTPUT | 获取价格 |
|
| HDM30-48D-D12 | HITRON | PCB-MOUNT DC-DC CONVERTER ENCAPSULATED MODULES 30 WATTS SINGLE OUTPUT | 获取价格 |
|
HDM30-48B-S03 相关文章
Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
- 2024-09-20
- 6
Bourns 精密环境传感器产品选型手册(英文版)
- 2024-09-20
- 9
Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
- 2024-09-20
- 8
Bourns GMOV 混合过压保护组件产品选型手册(英文版)
- 2024-09-20
- 6
