HMC-C043 [HITTITE]
GaAs MMIC I/Q MIXER MODULE 11 - 16 GHz; 砷化镓MMIC I / Q混频器模块11 - 16 GHz的型号: | HMC-C043 |
厂家: | HITTITE MICROWAVE CORPORATION |
描述: | GaAs MMIC I/Q MIXER MODULE 11 - 16 GHz |
文件: | 总6页 (文件大小:287K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC-C043
v00.0307
GaAs MMIC I/Q MIXER MODULE
11 - 16 GHz
Features
Wide IF Bandwidth: DC - 3.5 GHz
Image Rejection: 30 dB
LO to RF Isolation: 35 dB
High Input IP3: +28 dBm
Hermetically Sealed Module
Field Replaceable SMA Connectors
-55 to +85 °C Operating Temperature
Typical Applications
The HMC-C043 is ideal for:
5
• Point-to-Point Radios
• Point-to-Multi-Point Radios & VSAT
• Test Equipment & Sensors
• Military End-Use
General Description
The HMC-C043 is a passive I/Q MMIC mixer housed
in a miniature hermetic module which can be used as
either an Image Reject Mixer or a Single Sideband
Upconverter. The module utilizes two standard Hittite
double balanced mixer cells and a 90 degree hybrid
fabricated on a GaAs MESFET process. A low fre-
quency quadrature hybrid was used to produce a 100
MHz USB IF output. This MMIC based module is a
more reliable and consistent alternative to hybrid style
I/Q Mixers and Single Sideband Converter assem-
blies. The module features removable SMA connec-
tors which can be detached to allow direct connection
of the I/O pins to a microstrip or coplanar circuit.
Functional Diagram
Electrical Specifications, TA = +25° C, IF= 100 MHz, LO = +19 dBm*
Parameter
Min.
Typ.
11 - 16
DC - 3.5
9
Max.
12
Units
GHz
GHz
dB
Frequency Range, RF/LO
Frequency Range, IF
Conversion Loss (As IRM)
Image Rejection
15
30
dB
1 dB Compression (Input)
LO to RF Isolation
LO to IF Isolation
+20
35
dBm
dB
30
18
25
dB
IP3 (Input)
+28
0.5
dBm
dB
Amplitude Balance
Phase Balance
5
Deg
* Unless otherwise noted, all measurements performed as downconverter.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 - 40
HMC-C043
v00.0307
GaAs MMIC I/Q MIXER MODULE
11 - 16 GHz
Data taken As IRM With External IF Hybrid
Conversion Gain vs. Temperature
Image Rejection vs. Temperature
0
60
50
+25 C
+85 C
-55 C
-5
40
-10
30
20
10
0
+25C
+85C
-55C
-15
-20
5
10
11
12
13
14
15
16
16
16
17
17
17
10
11
12
13
14
15
16
16
16
17
17
17
RF FREQUENCY (GHz)
RF FREQUENCY (GHz)
Conversion Gain vs. LO Drive
Return Loss
0
0
+17dBm
+19dBm
-5
-5
-10
-15
-20
+21dBm
-10
RF
LO
-15
-20
10
11
12
13
14
15
10
11
12
13
14
15
RF FREQUENCY (GHz)
FREQUENCY (GHz)
Input P1dB vs. Temperature
Input IP3 vs. LO Drive
26
24
22
20
18
35
30
25
20
16
LO = +17 dBm
LO = +19 dBm
LO = +21 dBm
+25C
15
10
5
+85C
-55C
14
12
10
10
11
12
13
14
15
10
11
12
13
14
15
RF FREQUENCY (GHz)
RF FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 - 41
HMC-C043
v00.0307
GaAs MMIC I/Q MIXER MODULE
11 - 16 GHz
Quadrature Channel Data Taken Without IF Hybrid
Isolations
IF Bandwidth*
-10
0
LOF/IF2
-20
RETURN LOSS
CONVERSION GAIN
-5
-10
-15
-20
LO/IF1
-30
LO/RF
-40
-50
-60
RF/IF1
RF/IF2
5
10
11
12
13
14
15
16
17
0.5
1
1.5
2
2.5
3
3.5
17
17
RF FREQUENCY (GHz)
IF FREQUENCY (GHz)
Amplitude Balance vs. LO Drive
Phase Balance vs. LO Drive
8
15
6
LO = +17 dBm
LO = +19 dBm
10
LO = +21 dBm
4
LO = +17 dBm
LO = +19 dBm
LO = +21 dBm
5
0
2
0
-2
-4
-6
-8
-5
-10
-15
10
11
12
13
14
15
16
17
10
11
12
13
14
15
16
RF FREQUENCY (GHz)
RF FREQUENCY (GHz)
Upconverter Performance Conversion
Gain vs. LO Drive*
Upconverter Performance Sideband
Rejection vs. LO Drive*
0
0
LO = +17 dBm
LO = +19 dBm
LO = +21 dBm
-10
-20
-30
-40
-50
-60
-5
-10
LO = +17 dBm
-15
LO = +19 dBm
LO = +21 dBm
-20
10
11
12
13
14
15
16
17
10
11
12
13
14
15
16
RF FREQUENCY (GHz)
RF FREQUENCY (GHz)
* Conversion gain data taken with external IF hybrid
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 - 42
HMC-C043
v00.0307
GaAs MMIC I/Q MIXER MODULE
11 - 16 GHz
Harmonics of LO
MxN Spurious Outputs
nLO Spur at RF Port
nLO
LO Freq. (GHz)
1
2
3
4
mRF
0
1
-12
0
2
7
3
4
xx
10.5
11.5
32
32
32
34
35
34
49
47
51
52
48
54
58
61
63
67
69
71
79
61
53
xx
xx
xx
0
1
2
3
4
xx
24
79
87
xx
14
59
79
86
97
51
74
99
102
70
91
97
105
12.5
73
102
84
13.5
14.5
15.5
RF = 13.6 GHz @ -10 dBm
LO = 13.5 GHz @ +19 dBm
Data taken without IF hybrid
LO = +19 dBm
Values in dBc below input LO level measured at RF Port.
5
All values in dBc below IF power level
Absolute Maximum Ratings
RF / IF Input
+20 dBm
+27 dBm
150°C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
LO Drive
Channel Temperature
Continuous Pdiss (T=85°C)
(derate 6.9 mW/°C above 85°C)
448 mW
Thermal Resistance (RTH
(junction to die bottom)
)
145 °C/W
Storage Temperature
Operating Temperature
-65 to +150 °C
-55 to +85 °C
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 - 43
HMC-C043
v00.0307
GaAs MMIC I/Q MIXER MODULE
11 - 16 GHz
Outline Drawing
5
Typical Package Weight
Package
20.0 gms
Spacer
2.6 gms
+/- 1 gms Tolerance
NOTES:
1. PACKAGE, LEADS, COVER MATERIAL: KOVAR™
2. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER
ELECTROLYTIC NICKEL 75 MICROINCHES MIN.
3. SPACER MATERIAL: NICKEL PLATED ALUMINUM
4. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. TOLERANCES 0.010 [0.25] UNLESS OTHERWISE SPECIFIED.
6. FIELD REPLACEABLE SMA CONNECTORS.
TENSOLITE 5602-5CCSF OR EQUIVALENT.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 - 44
HMC-C043
v00.0307
GaAs MMIC I/Q MIXER MODULE
11 - 16 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
This pin is AC coupled and matched to
50 Ohms from 11 to 16 GHz.
1
RF
IF1
This pin is DC coupled. For applications not requir-
ing operation to DC, this port should be DC blocked
externally using a series capacitor whose value has
been chosen to pass the necessary IF frequency
range. For operation to DC, this pin must not source/
sink more than 3mA of current or part non-function
and possible part failure will result.
2
3
4
IF2
LO
5
This pin is AC coupled and matched to
50 Ohms from 11 to 16 GHz.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
5 - 45
相关型号:
©2020 ICPDF网 联系我们和版权申明