HMC336MS8G [HITTITE]
GaAs MMIC SPDT NON-REFLECTIVE POSITIVE CONTROL SWITCH, DC - 6.0 GHz; 砷化镓MMIC SPDT无反射阳性对照开关， DC - 6.0 GHz的
| 型号： | HMC336MS8G |
| 厂家： | 
HITTITE MICROWAVE CORPORATION |
| 描述： | GaAs MMIC SPDT NON-REFLECTIVE POSITIVE CONTROL SWITCH, DC - 6.0 GHz |
| 文件： | 总6页 (文件大小：177K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HMC336MS8G
v01.1202
MICROWAVE CORPORATION
GaAs MMIC SPDT NON-REFLECTIVE
POSITIVE CONTROL SWITCH, DC* - 6.0 GHz
Typical Applications
Features
This switch is suitable for usage in DC - 6.0 GHz
50-Ohm or 75-Ohm systems:
Broadband Performance: DC - 6.0 GHz
High Isolation: 42 dB@ 6 GHz
Low Insertion Loss: 1.6 dB@ 6 GHz
MSOP8G SMT Package
• Broadband
• Fiber Optics
• Switched Filter Banks
• Wireless below 6.0 GHz
Functional Diagram
General Description
The HMC336MS8G is a broadband non-reflec-
tive GaAs MESFET SPDT switch in a low cost
8 lead MSOP8G surface mount package with an
exposed ground paddle. Covering DC to 6.0 GHz,
this switch offers high isolation and low insertion
loss. The switch operates using a positive control
voltage of 0/+5 Volts, and requires a fixed bias of
+5V. This switch is suitable for usage in 50-Ohm
or 75-Ohm systems.
14
Electrical Specifications,TA = +25° C, With 0/+5V Control, 50 Ohm System
Parameter
Frequency
Min.
Typ.
Max.
Units
DC - 2.0 GHz
DC - 4.0 GHz
DC - 6.0 GHz
1.2
1.4
1.6
1.6
1.8
2.0
dB
dB
dB
Insertion Loss
DC - 2.0 GHz
DC - 4.0 GHz
DC - 6.0 GHz
42
39
37
47
44
42
dB
dB
dB
Isolation
DC - 2.0 GHz
DC - 6.0 GHz
9
6
12
9
dB
dB
Return Loss
“On State”
“Off State”
Return Loss (RF1, RF2)
2.0 - 6.0 GHz
0.5 - 6.0 GHz
13
20
18
25
dB
Input Power for 1 dB Compression
dBm
Input Third Order Intercept
(Two-Tone Input Power = +7 dBm Each Tone, 1 MHz Tone Spacing)
0.5 - 6.0 GHz
DC - 6.0 GHz
37
42
dBm
Switching Characteristics
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
8
20
ns
ns
* DC blocking capacitors are required at ports RFC, RF1 and RF2.
Their value will determine the lowest transmission frequency.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
14 - 176
HMC336MS8G
v01.1202
MICROWAVE CORPORATION
GaAs MMIC SPDT NON-REFLECTIVE
POSITIVE CONTROL SWITCH, DC - 6.0 GHz
InseGrtiaoAn sLoMssMvIsC.TeSmUpBer-aHtuAreRMONICALLY IPsoUlaMtiPonED MIXER 17 - 25 GHz
0
-1
-2
-3
-4
-5
0
-10
-20
-30
-40
-50
-60
-70
RF1
RF2
+25 C
-40 C
+85 C
0
1
2
3
4
5
6
7
8
0
1
2
3
4
5
6
7
8
FREQUENCY (GHz)
FREQUENCY (GHz)
Return Loss
0.1 and 1 dB Input Compression Point
0
30
14
29
-5
0.1 dB Compression Point
1 dB Compression Point
28
27
26
25
24
23
22
21
20
-10
-15
-20
-25
-30
-35
RFC
RF1,2 ON
RF1,2 OFF
0
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Third Order Intercept Point
60
55
50
45
40
35
30
+25 C
-40 C
+85 C
1
2
3
4
5
6
7
8
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
14 - 177
HMC336MS8G
v01.1202
MICROWAVE CORPORATION
GaAs MMIC SPDT NON-REFLECTIVE
POSITIVE CONTROL SWITCH, DC - 6.0 GHz
Absolute Maximum Ratings
Truth Table
Control Input
Signal Path State
RFCOM to:
RF1
Bias Voltage Range (Vdd)
+7.0 Vdc
A
B
Control Voltage Range
(A & B)
-0.5V to Vdd +1.0 Vdc
Low
High
Low
Storage Temperature
Operating Temperature
Maximum Input Power
Note:
-65 to +150 °C
-40 to +85 °C
+28 dBm
High
RF2
DC blocking capacitors are required at ports RFC
and RF1, 2. Their value will determine the lowest
transmission frequency.
Control Voltages
Bias Voltage & Current
State
Bias Condition
0 to 0.2 Vdc @ 35 µA Typical
+5 Vdc @ 10 µA Typical
Vdd
(Vdc)
Idd (Typ.)
(µA)
Idd (Max.)
(µA)
14
Low
+5.0
35
100
High
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
14 - 178
HMC336MS8G
v01.1202
MICROWAVE CORPORATION
GaAs MMIC SPDT NON-REFLECTIVE
POSITIVE CONTROL SWITCH, DC - 6.0 GHz
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEADFRAME MATERIAL: COPPER ALLOY
14
3. LEADFRAME PLATING: Sn/Pb SOLDER
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1
CTLA
See truth table and control voltage table.
2
CTLB
See truth table and control voltage table.
This pin is DC coupled and matched to 50 Ohm. Blocking
capacitors are required.
3, 5, 8
RFC, RF1, RF2
Supply Voltage. This pin may be left floating with degradation of
power performance by approximately 1.5 dB.
4
VDD
GND
Package bottom has exposed metal paddle that must also be
connected to PCB RF ground.
6, 7
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
14 - 179
v01.1202
HMC336MS8G
MICROWAVE CORPORATION
GaAs MMIC SPDT NON-REFLECTIVE
POSITIVE CONTROL SWITCH, DC - 6.0 GHz
Evaluation PCB
14
List of Material
The circuit board used in the final application should
be generated with proper RF circuit design techniques.
Item
Description
J1 - J3
J4 - J7
C1 - C3
C4
PC Mount SMA RF Connector
DC Pin
Signal lines at the RF port should have 50 ohm imped-
ance and the package ground leads and backside
ground slug should be connected directly to the ground
plane similar to that shown above. The evaluation circuit
board shown above is available from Hittite Microwave
Corporation upon request.
100 pF Capacitor, 0402 Pkg.
10k pF Capacitor, 0603 Pkg.
100 Ohm Resistor, 0402 Pkg.
HMC336MS8G SPDT Switch
104122 Evaluation PCB 1.05”x1.30”
R1 - R2
U1
PCB*
* Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
14 - 180
HMC336MS8G
v01.1202
MICROWAVE CORPORATION
GaAs MMIC SPDT NON-REFLECTIVE
POSITIVE CONTROL SWITCH, DC - 6.0 GHz
Notes:
14
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
14 - 181
相关型号：
HMC336MS8GETR
SPDT, 0MHz Min, 6000MHz Max, 2dB Insertion Loss-Max, ROHS COMPLIANT, PLASTIC, SMT, MSOP-8
HITTITE
©2020 ICPDF网 联系我们和版权申明