HMC483MS8GE [HITTITE]
HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 0.7 - 1.4 GHz; 高IP3的GaAs MMIC混频器，集成了LO放大器， 0.7 - 1.4 GHz的
| 型号： | HMC483MS8GE |
| 厂家： | 
HITTITE MICROWAVE CORPORATION |
| 描述： | HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 0.7 - 1.4 GHz |
| 文件： | 总8页 (文件大小：347K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HMC483MS8G / 483MS8GE
v00.0805
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.4 GHz
Designer’s Kit
Available
Typical Applications
Features
The HMC483MS8G / HMC483MS8GE is ideal for:
+33 dBm Input IP3
• Cellular/3G
Conversion Loss: 9 dB
• GSM, GPRS & EDGE
Low LO Drive: -4 to +4 dBm
7
• CDMA & WCDMA
Single Positive Supply: 5V @ 50 mA
Ultra Small MSOP Package: 14.8mm2
Included in the HMC-DK003 Designer’s Kit
• Cable Modem Termination Systems
Functional Diagram
General Description
The HMC483MS8G & HMC483MS8GE are high
dynamic range passive MMIC mixers with integrated
LO amplifiers in plastic surface mount 8 lead Mini
Small Outline Packages (MSOP) covering 0.7 to 1.4
GHz. Excellent input IP3 performance of +33 dBm for
down conversion and +30 dBm for up conversion is
provided for 2.5G & 3G GSM/CDMA applications at
an LO drive of 0 dBm. With an input 1 dB compression
of +24 dBm, the RF port will accept a wide range of
input signal levels. Conversion loss is 9.0 dB typical.
The DC to 350 MHz IF frequency response will satisfy
GSM/CDMA transmit or receive frequency plans
configured for low side LO. The HMC483MS8G &
HMC483MS8GE are pin for pin compatible with the
HMC485MS8G & HMC485MS8GE which are 1.7 -
2.2 GHz mixers with LO amplifiers.
Electrical Specifications, TA = +25°C, LO = 0 dBm, IF = 70 MHz*, Vdd= 5V
Parameter
Frequency Range, RF & LO
Frequency Range, IF
Conversion Loss
Min.
Typ.
0.8 - 1.1
DC - 350
8.5
Max.
Min.
Typ.
Max.
Units
GHz
MHz
dB
0.7 - 1.4
DC - 350
10.5
10.5
9
9
12
12
Noise Figure (SSB)
8.5
dB
LO to RF Isolation
10
6
20
6
6
14
dB
LO to IF Isolation
10
13
dB
IP3 (Input)
33
33
dBm
dBm
dBm
mA
1 dB Gain Compression (Input)
LO Input Drive Level (Typical)
Supply Current
24
23
-4 to +4
50
-4 to +4
50
*Unless otherwise noted, all measurements performed as a downconverter.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 334
HMC483MS8G / 483MS8GE
v00.0805
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.4 GHz
Conversion Gain vs. Temperature
Isolation
0
0
-5
-10
7
-10
-15
-20
-20
+ 25C
+ 85C
- 40C
RF TO IF
-30
LO TO RF
LO TO IF
-40
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
FREQUENCY (GHz)
RF FREQUENCY (GHz)
Return Loss
Conversion Gain vs. LO Drive
0
0
-5
-10
-15
-20
-5
-10
LO = -6 dBm
LO = -4 dBm
LO = -2 dBm
LO = 0 dBm
LO = +2 dBm
LO = +4 dBm
-15
-20
LO
RF
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
FREQUENCY (GHz)
RF FREQUENCY (GHz)
Upconverter Performance
Conversion Gain
IF Bandwidth
0
0
-5
-10
-15
-20
-5
-10
LO = -6 dBm
LO = -4 dBm
LO = -2 dBm
LO = 0 dBm
LO = +2 dBm
LO = +4 dBm
-15
-20
CONVERSION GAIN
RETURN LOSS
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
0
40
80 120 160 200 240 280 320 360 400
IF FREQUENCY (MHz)
RF FREQUENCY (GHz)
*Unless otherwise noted, all measurements performed as a downconverter, with low side LO & IF = 70 MHz.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 335
HMC483MS8G / 483MS8GE
v00.0805
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.4 GHz
Input IP3 vs. LO Drive
Input IP3 vs. Temperature
40
40
35
30
35
30
7
LO =-6dBm
LO =-4dBm
LO =-2dBm
LO = 0dBm
LO =+2dBm
LO =+4dBm
+ 25C
+ 85C
- 40C
25
20
25
20
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
FREQUENCY (GHz)
FREQUENCY (GHz)
Input IP2 vs. Temperature
Input IP2 vs. LO Drive
40
40
35
30
25
20
35
30
25
20
LO =-6dBm
LO =-4dBm
LO =-2dBm
LO = 0dBm
LO =+2dBm
LO =+4dBm
+ 25C
+ 85C
- 40C
0.6
0.7
0.8
0.9
1
1.1
1.2
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
FREQUENCY (GHz)
FREQUENCY (GHz)
Input P1dB vs. Temperature
Upconverter IP3 vs. LO Drive
40
30
30
20
25
20
LO =-6dBm
LO =-4dBm
LO =-2dBm
LO = 0dBm
LO =+2dBm
LO =+4dBm
+ 25C
+ 85C
- 40C
10
0
15
10
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
0.6
0.7
0.8
0.9
1
1.1
1.2
FREQUENCY (GHz)
RF FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 336
HMC483MS8G / 483MS8GE
v00.0805
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.4 GHz
MxN Spurious Outputs
Harmonics of LO
nLO
nLO Spur at RF Port
mRF
0
xx
4
1
-9
2
3
3
4
16
LO Freq GHz
1
21
15
12
9
2
3
4
0
1
2
3
4
24
0.7
23
23
26
22
22
21
24
18
23
33
42
25
25
43
39
32
27
26
0
30
15
61
89
108
28
61
95
108
0.8
7
66
83
106
71
95
105
50
0.9
103
103
1
1.1
1.2
6
3
RF Freq = 0.87 GHz @ -10 dBm
LO Freq = 0.8 GHz @ 0 dBm
All values in dBc Relative to the IF power level.
LO power = 0 dBm
All values in dBc below input LO level measured at RF port.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 337
HMC483MS8G / 483MS8GE
v00.0805
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.4 GHz
Absolute Maximum Ratings
RF/IF Input
+27 dBm
+10 dBm
+7 Vdc
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
LO Drive
Bias Supply (Vdd)
Channel Temperature
150 °C
7
Continuous Pdiss (T = 85°C)
(Derate 8.95 mW/°C above 85°C)
0.58 W
Thermal Resistance (RTH
)
111.7 °C/W
(Channel to ground paddle)
Storage Temperature
Operating Temperature
IF DC Current
-65 to +150 °C
-40 to +85 °C
40 mA
ESD Sensitivity (HBM)
Class 1B
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL1 [1]
Package Marking [3]
H483
XXXX
HMC483MS8G
HMC483MS8GE
Low Stress Injection Molded Plastic
Sn/Pb Solder
H483
XXXX
MSL1 [2]
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 338
HMC483MS8G / 483MS8GE
v00.0805
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.4 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
This pin is AC coupled & matched to 50 Ohms
from 0.7 to 1.4 GHz.
1
LO
7
Not connected. This pin may be connected to RF/DC
ground without affecting performance.
2
N/C
This pin and the ground paddle must be
connected to RF ground.
3, 6, 7
GND
Power supply for LO amplifier.
An external RF bypass capacitor is required.
4
Vdd
This pin is DC coupled. For applications not requiring
operation to DC this port should be DC blocked externally
using a series capacitor. Choose value of capacitor to pass
IF frequency desired. For operation to DC, this pin must
not sink/source more than 40 mA of current or failure may
result.
5
8
IF
This pin is DC coupled & matched to 50 Ohms
from 0.7 to 1.4 GHz
RF
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 339
HMC483MS8G / 483MS8GE
v00.0805
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.4 GHz
Evaluation PCB
7
List of Materials for Evaluation PCB 105188 [1]
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of VIA holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
Item
J1 - J3
J4 - J5
C1
Description
PCB Mount SMA RF Connector
DC Pin
10,000 pF Chip Capacitor, 0603 Pkg.
HMC483MS8G / HMC483MS8GE Mixer
104813 Evaluation Board
U1
[2]
PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 340
HMC483MS8G / 483MS8GE
v00.0805
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 0.7 - 1.4 GHz
Notes:
7
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 341
相关型号：
HMC484MS8GETR
Diversity Switch, 0MHz Min, 3000MHz Max, 1.3dB Insertion Loss-Max, ROHS COMPLIANT, ULTRA SMALL, PLASTIC, SMT, MSOP-8
HITTITE
©2020 ICPDF网 联系我们和版权申明