首页 |元器件品牌

HMC602LP4RTR [HITTITE]

暂无描述;
HMC602LP4RTR
型号： HMC602LP4RTR
厂家： HITTITE MICROWAVE CORPORATION    HITTITE MICROWAVE CORPORATION
描述：

暂无描述

射频和微波 射频检测器 微波检测器 电信集成电路 控制器
文件： 总8页 (文件大小：360K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
HMC602LP4 / 602LP4E  
v03.0209  
70 dB, LOGARITHMIC  
DETECTOR / CONTROLLER, 1 - 8000 MHz  
Typical Applications  
Features  
The HMC602LP4(E) is ideal for IF and RF applica-  
tions in:  
Wide Dynamic Range: up to 70 dB  
High Accuracy: 1 dB with 60 dB Range Up To 6 GHz  
Fast: 10ns Output Response Time  
Supply Voltage: +5V  
• Cellular/PCS/3G  
• WiMAX, WiBro, WLAN, Fixed Wireless & Radar  
• Power Monitoring & Control Circuitry  
• Receiver Signal Strength Indication (RSSI)  
• Automatic Gain & Power Control  
Power-Down Mode  
Excellent Stability over Temperature  
Buffered Temperature Sensor Output  
Compact 4x4mm Leadless SMT Package  
Functional Diagram  
General Description  
12  
The HMC602LP4(E) Logarithmic Detector/Controller  
converts RF signals at its input, to a proportional DC  
voltage at its output. The HMC602LP4(E) employs  
a successive compression topology which delivers  
extremely high dynamic range and conversion accuracy  
over a wide input frequency range. As the input power  
is increased, successive amplifiers move into saturation  
one by one creating an accurate approximation of the  
logarithm function. The output of a series of square law  
detectors is summed, converted into voltage domain  
and buffered to drive the LOGOUT output. For detection  
mode, the LOGOUT pin is shorted to the VSET input,  
and will provide a nominal logarithmic slope of -25mV/  
dB and an intercept of 18 dBm (23 dBm for ƒ > 5.8 GHz).  
The HMC602LP4(E) can also be used in the controller  
mode where an external voltage is applied to the VSET  
pin, to create an AGC or APC feedback loop.  
[1]  
Electrical Specifications, TA = +25C, EN= 5V, Vcc1, Vcc2, Vcc3= +5V  
Parameter  
Typ.  
Typ.  
100  
70  
Typ.  
900  
71  
Typ.  
1900  
71  
Typ.  
2200  
71  
Typ.  
3600  
68  
Typ.  
5800  
66  
Typ.  
7000  
61  
Typ.  
8000  
56  
Units  
MHz  
dB  
Input Frequency  
50  
3 dB Dynamic Range  
3 dB Dynamic Range Center  
1 dB Dynamic Range  
69  
-24.5  
61  
-25  
61  
-25.5  
62  
-25.5  
62  
-25.5  
63  
-24  
-23  
-20.5  
56  
-19  
dBm  
dB  
62  
63  
49  
Output Intercept  
18.2  
-25.6  
16  
18  
18.7  
-25.3  
14  
19.8  
-25  
20.2  
-25  
23.1  
-24.6  
16  
24.4  
-25.4  
15  
23  
21.6  
-30  
22  
dBm  
mV/dB  
mdB/°C  
Output Slope  
-25.5  
16  
-27.5  
14  
Temperature Sensitivity @ -10 dBm Input [2]  
14  
15  
[1] Detector mode measurements; LOGOUT (Pin 15) is shorted to VSET (Pin 16).  
[2] Measured from T = -40C to T = +85C  
A
A
[3] C9 removed from production board  
Parameter  
LOGOUT Interface  
Conditions  
Min.  
0
Typ.  
Max.  
Units  
Output Voltage Range  
Vcc -1.0  
V
Output Fall Time  
Output Rise Time  
VSET Interface  
-10 dBm Input Pulsed; Measured from 10% to 90% [3]  
-10 dBm Input Pulsed; Measured from 10% to 70% [3]  
9.5  
10  
ns  
ns  
Input Impedance  
Input Voltage Range  
Low Frequency Gain  
30  
kΩ  
V
0.25 to 2.0  
56  
VSET to LOGOUT  
dB  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
12 - 18  
HMC602LP4 / 602LP4E  
v03.0209  
70 dB, LOGARITHMIC  
DETECTOR / CONTROLLER, 1 - 8000 MHz  
Electrical Specifications, (continued)  
Parameter  
Conditions  
Min.  
Typ.  
700  
Max.  
Units  
kHz  
Open Loop Corner Frequency  
Power Down (EN) Interface  
Voltage Range for Normal Mode  
Voltage Range for Powerdown Mode  
Threshold Voltage  
0.8 x Vcc [4]  
0
Vcc [4]  
0.2 x Vcc [4]  
V
V
V
Vcc [4]/2  
Power Supply (Vcc1, Vcc2, Vcc3)  
Operating Voltage Range  
4.5  
5.5  
V
Supply Current in Normal Mode  
Supply Current in Power Down Mode  
113  
1
mA  
mA  
[4] Vcc= Vcc1= Vcc2= Vcc3= +5V  
Test Conditions  
12  
Parameter  
Condition  
+5V  
Vcc1, Vcc2, Vcc3  
Input Zo  
TA  
50Ω  
+25C  
Fin  
900 MHz  
LOGOUT Voltage & Error  
LOGOUT Voltage & Error  
vs. Input Power, Fin = 50 MHz  
vs. Input Power, Fin = 100 MHz  
4
2
0
4
2.6  
2.6  
ERR +25C  
ERR +85C  
ERR +25C  
ERR +85C  
ERR -40C  
ERR -40C  
2
2
2
0
1.4  
1.4  
-2  
-2  
0.8  
0.2  
0.8  
0.2  
Ideal  
Ideal  
LOGOUT +25C  
LOGOUT +85C  
LOGOUT -40C  
LOGOUT +25C  
LOGOUT +85C  
LOGOUT -40C  
-4  
-4  
-70  
-60  
-50  
-40  
-30  
-20  
-10  
0
10  
-70  
-60  
-50  
-40  
-30  
-20  
-10  
0
10  
INPUT POWER (dBm)  
INPUT POWER (dBm)  
LOGOUT Voltage & Error  
LOGOUT Voltage & Error  
vs. Input Power, Fin = 900 MHz  
vs. Input Power, Fin = 1900 MHz  
4
4
2.6  
2.6  
ERR +25C  
ERR +85C  
ERR -40C  
ERR +25C  
ERR +85C  
ERR -40C  
2
2
2
2
0
0
1.4  
1.4  
-2  
-2  
0.8  
0.2  
Ideal  
0.8  
0.2  
Ideal  
LOGOUT +25C  
LOGOUT +85C  
LOGOUT -40C  
LOGOUT +25C  
LOGOUT +85C  
LOGOUT -40C  
-4  
-4  
-70  
-60  
-50  
-40  
-30  
-20  
-10  
0
10  
-70  
-60  
-50  
-40  
-30  
-20  
-10  
0
10  
INPUT POWER (dBm)  
INPUT POWER (dBm)  
Unless otherwise noted: Vcc1, Vcc2, Vcc3 = +5V, TA = +25C  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
12 - 19  
HMC602LP4 / 602LP4E  
v03.0209  
70 dB, LOGARITHMIC  
DETECTOR / CONTROLLER, 1 - 8000 MHz  
LOGOUT Voltage & Error  
vs. Input Power, Fin = 2200 MHz  
LOGOUT Voltage & Error  
vs. Input Power, Fin = 3600 MHz  
4
4
2.6  
2.6  
ERR +25C  
ERR +85C  
ERR -40C  
ERR +25C  
ERR +85C  
ERR -40C  
2
2
2
2
0
0
1.4  
1.4  
0.8  
0.2  
-2  
-2  
0.8  
Ideal  
Ideal  
LOGOUT +25C  
LOGOUT +85C  
LOGOUT -40C  
LOGOUT +25C  
LOGOUT +85C  
LOGOUT -40C  
-4  
-4  
0.2  
12  
-70  
-60  
-50  
-40  
-30  
-20  
-10  
0
10  
10  
10  
-70  
-60  
-50  
-40  
-30  
-20  
-10  
0
10  
INPUT POWER (dBm)  
INPUT POWER (dBm)  
LOGOUT Voltage & Error  
vs. Input Power, Fin = 5800 MHz  
LOGOUT Voltage & Error  
vs. Input Power, Fin = 7000 MHz  
4
6
2.6  
2.6  
Ideal  
ERR +25C  
LOGOUT +25C  
LOGOUT +85C  
ERR +85C  
ERR -40C  
LOGOUT -40C  
2
3
2
1.4  
0.8  
0.2  
2
0
0
1.4  
-2  
-4  
-3  
-6  
0.8  
Ideal  
ERR +25C  
ERR +85C  
ERR -40C  
LOGOUT +25C  
LOGOUT +85C  
LOGOUT -40C  
0.2  
-70  
-60  
-50  
-40  
-30  
-20  
-10  
0
-70  
-60  
-50  
-40  
-30  
-20  
-10  
0
10  
INPUT POWER (dBm)  
INPUT POWER (dBm)  
LOGOUT Voltage & Error  
vs. Input Power, Fin = 8000 MHz  
LOGOUT vs. Frequency Over Input Power  
10  
5
2.4  
2.4  
-70dBm  
-60dBm  
ERR +25C  
ERR +85C  
ERR -40C  
-50dBm  
1.8  
1.2  
0.6  
0
1.8  
1.2  
0.6  
0
-40dBm  
-30dBm  
0
-20dBm  
-10dBm  
-5  
-10  
0dBm  
Ideal  
LOGOUT +25C  
LOGOUT +85C  
LOGOUT -40C  
10dBm  
0
1
2
3
4
5
6
7
8
-70  
-60  
-50  
-40  
-30  
-20  
-10  
0
FREQUENCY (GHz)  
INPUT POWER (dBm)  
Unless otherwise noted: Vcc1, Vcc2, Vcc3 = +5V, T = +25C  
A
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
12 - 20  
HMC602LP4 / 602LP4E  
v03.0209  
70 dB, LOGARITHMIC  
DETECTOR / CONTROLLER, 1 - 8000 MHz  
LOGOUT Slope vs. Frequency  
LOGOUT Slope vs. Supply Voltage  
-20  
-20  
0.1GHz  
1.9GHz  
-22  
-22  
-24  
-26  
-28  
3.6GHz  
5.8GHz  
8GHz  
-24  
-26  
-28  
-30  
+25C  
+85C  
-40C  
-30  
-32  
-32  
4.5  
12  
0
1
2
3
4
5
6
7
8
5
5.5  
FREQUENCY (GHz)  
Vcc1, Vcc2, Vcc3 (Volts)  
LOGOUT Intercept vs. Frequency  
LOGOUT Intercept vs. Supply Voltage  
30  
26  
24  
22  
20  
18  
27  
24  
21  
18  
+25C  
+85C  
-40C  
0.1GHz  
1.9GHz  
3.6GHz  
5.8GHz  
8GHz  
16  
14  
12  
15  
12  
0
1
2
3
4
5
6
7
8
4.5  
5
5.5  
FREQUENCY (GHz)  
Vcc1, Vcc2, Vcc3 (Volts)  
LOGOUT Error vs. Input Power,  
LOGOUT Voltage  
vs. Input Power & Frequency  
Normalized [2], Fin= 1900 MHz  
2
2.4  
2
1
0
1.6  
1.2  
0.8  
0.4  
0
50 MHz  
100 MHz  
900 MHz  
1900 MHz  
2200 MHz  
3600MHz  
5800MHz  
8000MHz  
+85C  
-40C  
-1  
-2  
-70  
-60  
-50  
-40  
-30  
-20  
-10  
0
10  
-70  
-60  
-50  
-40  
-30  
-20  
-10  
0
10  
INPUT POWER (dBm)  
INPUT POWER (dBm)  
[1] Unless otherwise noted: Vcc1, Vcc2, Vcc3 = +5V, T = +25C  
A
[2] This data is relative to the room temperature performance of the HMC602LP4(E)  
[3] Reference plane at J1 connector on Evaluation PCB  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
12 - 21  
HMC602LP4 / 602LP4E  
v03.0209  
70 dB, LOGARITHMIC  
DETECTOR / CONTROLLER, 1 - 8000 MHz  
Input Return Loss vs Frequency [4]  
Absolute Maximum Ratings  
0
-10  
-20  
-30  
-40  
-50  
Vcc1, Vcc2, Vcc3  
+5.5V  
+5.5V  
+5.5V  
3 mA  
EN  
VSET Input Voltage  
LOGOUT Output Current  
RF Input Power  
Junction Temperature  
+15 dBm  
125 °C  
Continuous Pdiss (T = 85°C)  
(Derate 7.95 mW/°C above 85°C)  
1.55 Watts  
42 °C/W  
Thermal Resistance (Rth)  
(junction to lead)  
0
1
2
3
4
5
6
7
8
Storage Temperature  
Operating Temperature  
-65 to +150 °C  
-40 to +85 °C  
12  
FREQUENCY (GHz)  
ELECTROSTATIC SENSITIVE DEVICE  
OBSERVE HANDLING PRECAUTIONS  
[4] Reference plane at J1 connector on Evaluation PCB  
Outline Drawing  
NOTES:  
1. LEADFRAME MATERIAL: COPPER ALLOY  
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].  
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE  
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.  
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.  
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.  
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.  
7. REFER TO HMC APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN.  
Package Information  
Part Number  
Package Body Material  
Lead Finish  
MSL Rating  
MSL1 [1]  
Package Marking [3]  
H602  
XXXX  
HMC602LP4  
Low Stress Injection Molded Plastic  
Sn/Pb Solder  
H602  
XXXX  
MSL1 [2]  
HMC602LP4E  
RoHS-compliant Low Stress Injection Molded Plastic  
100% matte Sn  
[1] Max peak reflow temperature of 235 °C  
[2] Max peak reflow temperature of 260 °C  
[3] 4-Digit lot number XXXX  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
12 - 22  
HMC602LP4 / 602LP4E  
v03.0209  
70 dB, LOGARITHMIC  
DETECTOR / CONTROLLER, 1 - 8000 MHz  
Pin Descriptions  
Pin Number  
Function  
Description  
These pins are not connected internally.  
Interface Schematic  
1, 6, 7, 13,  
17, 18  
N/C  
2
TEMP  
Temperature sensor output pin.  
12  
RF Input pins. Connect RF to INP, and AC couple  
INN to ground for single-ended operation.  
3, 4  
INP, INN  
Enable pin, connect to Vcc1, Vcc2, Vcc3 for normal operation.  
Applying voltage <0.2 x (Vcc1, Vcc2, Vcc3) will initiate power  
saving mode.  
5
EN  
8 - 12, 19, 20,  
23, 24  
Vcc1, Vcc2,  
Vcc3  
Bias supply. Connect supply voltage to  
these pins with appropriate filtering.  
14  
CLPF  
Loop filter capacitor for output ripple filtering.  
Logarithmic output that converts the input power  
to a DC level in detector mode. Short this pin to  
VSET for detector mode.  
15  
16  
LOGOUT  
VSET input in controller mode. Short this  
pin to LOGOUT for detector mode.  
VSET  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
12 - 23  
HMC602LP4 / 602LP4E  
v03.0209  
70 dB, LOGARITHMIC  
DETECTOR / CONTROLLER, 1 - 8000 MHz  
Pin Descriptions (Continued)  
Pin Number  
Function  
Description  
Interface Schematic  
21, 22  
N/C  
The user should not connect to these pins.  
Package Base  
GND  
Exposed paddle must be connected to RF and DC ground.  
Application & Evaluation PCB Schematic  
12  
Notes  
Note 1: The HMC602LP4 & HMC602LP4E evaluation boards are pre-assembled for single-ended input, and detector/RSSI mode.  
Note 2: For detector mode, connect high impedance volt meter to the LOGOUT port, and make no connection to VSET. LOGOUT  
is shorted to VSET by R9, as required for detector mode.  
Note 3: For controller mode, remove R9 and install 0 ohm resistor (R11), then make appropriate connection to LOGOUT and VSET.  
In controller mode, the LOGOUT output can be used to drive a variable gain amplifier, or a variable attenuator, either  
directly or through a buffer or microcontroller. VSET should be connected to an external supply, typically between +0.6  
and +1.9V.  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
12 - 24  
HMC602LP4 / 602LP4E  
v03.0209  
70 dB, LOGARITHMIC  
DETECTOR / CONTROLLER, 1 - 8000 MHz  
Evaluation PCB  
12  
List of Materials for Evaluation PCB 121492 [1]  
The circuit board used in the final application should  
use RF circuit design techniques. Signal lines  
should have 50 ohm impedance while the package  
ground leads and exposed paddle should be con-  
nected directly to the ground plane similar to that  
shown. A sufficient number of via holes should be  
used to connect the top and bottom ground planes.  
The evaluation circuit board shown is available from  
Hittite upon request.  
Item  
Description  
J1 - J3  
J4  
PC Mount SMA Connector  
Molex Connector Header  
DC Pin  
J5 - J9  
C1, C2, C3, C5, C7 100 pF Capacitor, 0402 Pkg.  
C4, C6, C8  
0.1μF Capacitor, 0402 Pkg.  
220 pF Capacitor, 0402 Pkg.  
68Ω Resistor, 0402 Pkg.  
1k Ω Resistor, 0402 Pkg.  
10k Ω Resistor, 0402 Pkg.  
0Ω Resistor, 0402 Pkg.  
C9  
R1  
R2  
R3  
R4 - R6, R9, R12  
R13  
R14  
R15  
R16  
180Ω Resistor, 0402 Pkg.  
27.4Ω Resistor, 0402 Pkg.  
15Ω Resistor, 0402 Pkg.  
49.9Ω Resistor, 0402 Pkg.  
HMC602LP4 / HMC602LP4E  
Logarithmic Detector / Controller  
U1  
[2]  
PCB  
121490 Evaluation PCB  
[1] Reference this number when ordering complete evaluation PCB  
[2] Circuit Board Material: Rogers 4350  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
12 - 25  

相关型号：

HMC602LP4TR

 70 dB, Logarithmic Detector/Controller SMT, 1 - 8000 MHz
ADI

HMC602LP4TR

 RF and Baseband Circuit, PQCC24, 4 X 4 MM, PLASTIC, SMT-24
HITTITE

HMC602LP4_09

 70 dB, LOGARITHMIC DETECTOR / CONTROLLER, 1 - 8000 MHz
HITTITE

HMC603MS10

 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz
HITTITE

HMC603MS10E

 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz
HITTITE

HMC603MS10ETR

 Variable Attenuator
HITTITE

HMC603MS10TR

 暂无描述
HITTITE

HMC603MS10_08

 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz
HITTITE

HMC603QS16

 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz
HITTITE

HMC603QS16E

 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz
HITTITE

HMC603QS16ETR

 Variable Attenuator
HITTITE

HMC603QS16_08

 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.7 - 3.8 GHz
HITTITE
©2020 ICPDF网 联系我们和版权申明