HMC724LC3C [HITTITE]
14 Gbps FAST RISE TIME 1:2 FANOUT BUFFER; 14 Gbps的快速上升时间1 : 2扇出缓冲器型号: | HMC724LC3C |
厂家: | HITTITE MICROWAVE CORPORATION |
描述: | 14 Gbps FAST RISE TIME 1:2 FANOUT BUFFER |
文件: | 总8页 (文件大小:383K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HMC724LC3C
v03.1010
14 Gbps FAST RISE TIME
1:2 FANOUT BUFFER
Typical Applications
Features
The HMC724LC3C is ideal for:
• 16 G Fiber Channel
Inputs Terminated Internally to 50 Ohms
Differential Inputs are DC Coupled
Propagation Delay: 110 ps
• RF ATE Applications
3
Fast Rise and Fall Times: 19 / 18 ps
Power Dissipation: 300 mW
• Broadband Test & Measurement
• Serial Data Transmission up to 14 Gbps
• Clock Buffering up to 14 GHz
16 Lead Ceramic 3x3 mm SMT Package: 9 mm2
Functional Diagram
General Description
The HMC724LC3C is a 1:2 Fanout Buffer designed to
support data transmission rates up to 14 Gbps, and
clock frequencies as high as 14 GHz. All differential
inputs and outputs are DC coupled and terminated on
chip with 50 Ohm resistors to ground. The outputs may
be used in either single ended or differential modes,
and should be AC or DC coupled into 50 Ohm resistors
connected to ground.
All differential inputs to the HMC724LC3C are CML
and terminated on-chip with 50 Ohms to the positive
supply, GND, and may be DC or AC coupled. The
differential CMl outputs are source terminated to to 50
Ohms and may also be AC or DC coupled. Outputs can
be connected directly to a 50 Ohm ground-terminated
system or drive devices with CML logic input. The
HMC724LC3C operates from a single -3.3 V supply and
is available in ROHS-compliant 3x3 mm SMT package.
Electrical Specifications, TA = +25 ºC, Vee = -3.3 V
Parameter
Conditions
Min.
-3.6
Typ.
-3.3
90
Max
-3.0
Units
V
Power Supply Voltage
Power Supply Current
Maximum Data Rate
Maximum Clock Rate
Input Voltage Range
Input Differential Range
Input Return Loss
mA
14
Gbps
GHz
V
14
-1.5
0.1
0.5
2.0
Vp-p
dB
Frequency <14 GHz
Single-Ended, peak-to-peak
Differential, peak-to-peak
10
550
mVp-p
mVp-p
mV
Output Amplitude
1100
-10
Output High Voltage
Output Low Voltage
Output Rise / Fall Time
-560
19 / 18
mV
Single-Ended, 20% - 80%
ps
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 1
HMC724LC3C
v03.1010
14 Gbps FAST RISE TIME
1:2 FANOUT BUFFER
Electrical Specifications (continued)
Parameter
Conditions
Min.
Typ.
10
Max
Units
dB
Output Return Loss
Small Signal Gain
Frequency <14 GHz
27
dB
Random Jitter J
rms
0.2
2
ps rms
ps
R
3
Deterministic Jitter, J
δ - δ, 215-1 PRBS input [1]
6
D
Propagation Delay, td
110
<2
ps
D1 to D2 Data Skew, t
ps
SKEW
[1] Deterministic jitter measured at 13 GHz with a 300 mVp-p, 215-1 PRBS input sequence.
Output Differential Voltage
vs. Supply Voltage [2]
1500
DC Current vs. Supply Voltage [1]
110
105
1400
1300
1200
1100
1000
900
+25C
+85C
-40C
+25C
+85C
-40C
100
95
90
85
80
75
70
-3.7
-3.6
-3.5
-3.4
-3.3
-3.2
-3.1
-3
-2.9
-3.7
-3.6
-3.5
-3.4
-3.3
-3.2
-3.1
-3
-2.9
SUPPLY VOLTAGE (V)
SUPPLY VOLTAGE (V)
Output Differential Voltage vs. Frequency [3]
Rise / Fall Time vs. Supply [1]
1300
25
1200
1100
1000
900
23
21
19
800
tr
tf
17
700
600
2
15
-3.7
4
6
8
10
12
14
16
-3.6
-3.5
-3.4
-3.3
-3.2
-3.1
-3
-2.9
SUPPLY VOLTAGE (V)
FREQUENCY (GHz)
[1] Data rate = 13 Gbps
[2] Frequency = 10 GHz
[3] Vee = 3.3 V
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 2
HMC724LC3C
v03.1010
14 Gbps FAST RISE TIME
1:2 FANOUT BUFFER
Output Return Loss vs. Frequency
Input Return Loss vs. Frequency
0
0
-10
-20
-30
-40
-50
-5
-10
-15
-20
-25
-30
-35
-40
3
0
2
4
6
8
10
12
14
0
2
4
6
8
10
12
14
FREQUENCY (GHz)
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 3
HMC724LC3C
v03.1010
14 Gbps FAST RISE TIME
1:2 FANOUT BUFFER
Eye Diagram
[1] Test Conditions:
Pattern generated with an Agilent N4903A Serial BERT.
Eye Diagram presented on a Tektronix CSA 8000.
Device input = 10 Gbps PN code, Vin = 300 mVp-p differential.
Both output channels shown.
3
Timing Diagram
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 4
HMC724LC3C
v03.1010
14 Gbps FAST RISE TIME
1:2 FANOUT BUFFER
Absolute Maximum Ratings
Power Supply Voltage (Vee)
-3.75 V to +0.5 V
-2 V to +0.5 V
-1.5 V to +1 V
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Input Signals
Output Signals
Continuous Pdiss (T = 85 °C)
(derate 17 mW/°C above 85 °C)
0.68 W
3
Thermal Resistance (Rth j-p) Worst
case junction to package paddle
59 °C/W
Maximum Junction Temperature
Storage Temperature
125 °C
-65 °C to +150 °C
-40 °C to +85 °C
Operating Temperature
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING:
30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05 mm DATUM -C-
6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
7. PADDLE MUST BE SOLDERED TO GND.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 5
HMC724LC3C
v03.1010
14 Gbps FAST RISE TIME
1:2 FANOUT BUFFER
Pin Descriptions [1]
Pin Number
Function
Description
Interface Schematic
1, 4, 5, 8, 9, 12
GND
Signal Grounds
3
2, 3
10, 11
D1P, D1N
D2N, D2P
Differential Data Inputs, Current Mode Logic (CML)
referenced to positive supply.
Differential Data Outputs, Current Mode Logic (CML)
referenced to positive supply.
6, 7
DINP, DINN
13, 16
Vee
Negative Supply
Supply Ground
14,
GND
Package Base
No Connection required. This pin may be connected
to RF/DC ground without affecting performance.
15
N/C
[1] Contact HMC for alternate pinouts
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 6
HMC724LC3C
v03.1010
14 Gbps FAST RISE TIME
1:2 FANOUT BUFFER
Evaluation PCB
3
List of Materials for Evaluation PCB 122520 [1]
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package gro-
und leads should be connected directly to the
ground plane similar to that shown. The exposed
packaged base should be connected to GND. A
sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Hittite upon request.
Item
J1 - J6
J7, J9
C1
Description
PCB Mount SMA RF Connectors
DC Pin
4.7 µF Capacitor, Tantalum
100 pF, Capacitor 0402 Pkg.
C5
HMC724LC3C
High Speed Logic, Fanout Buffer
U1
[2]
PCB
122518 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR or Rogers 4350
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 7
HMC724LC3C
v03.1010
14 Gbps FAST RISE TIME
1:2 FANOUT BUFFER
Application Circuit
3
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
3 - 8
相关型号:
HMC725LC3CTR
XOR/XNOR Gate, 725 Series, 1-Func, 2-Input, CQCC16, 3 X 3 MM, ROHS COMPLIANT, CERAMIC, SMT-16
HITTITE
HMC726LC3CTR
OR-AND/OR-AND-Invert Gate, 726 Series, 1-Func, 2-Input, CQCC16, 3 X 3 MM, ROHS COMPLIANT, CERAMIC, SMT-16
HITTITE
©2020 ICPDF网 联系我们和版权申明