HMC798LC4_10 [HITTITE]

GaAs MMIC SUB-HARMONIC SMT MIXER, 24 - 34 GHz; 砷化镓MMIC分谐波混频器的SMT , 24 - 34 GHz的
HMC798LC4_10
型号: HMC798LC4_10
厂家: HITTITE MICROWAVE CORPORATION    HITTITE MICROWAVE CORPORATION
描述:

GaAs MMIC SUB-HARMONIC SMT MIXER, 24 - 34 GHz
砷化镓MMIC分谐波混频器的SMT , 24 - 34 GHz的

文件: 总8页 (文件大小:250K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
HMC798LC4  
v03.0110  
GaAs MMIC SUB-HARMONIC  
SMT MIXER, 24 - 34 GHz  
Typical Applications  
Features  
The HMC798LC4 is ideal for:  
• Point-to-Point Radios  
• Point-to-Multi-Point Radios & VSAT  
• Test Equipment & Sensors  
• Military End-Use  
Integrated LO Amplifier: +4 dBm Input  
Sub-Harmonically Pumped (x2) LO  
Wideband IF: DC - 4 GHz  
10  
Single Positive Supply: +5V @ 95mA  
24 Lead 4x4mm SMT Package: 16mmꢀ  
• SAT COM  
Functional Diagram  
General Description  
The HMC798LC4 is a 24 - 34 GHz Sub-harmonically  
Pumped (x2) MMIC Mixer with an integrated LO  
amplifier in a leadless RoHS compliant SMT package.  
The 2LO to RF isolation is excellent at 30 dB,  
eliminating the need for additional filtering. The  
LO amplifier is a single bias +5V design with a  
nominal +4 dBm drive requirement. The RF and  
LO ports are matched to 50 Ohms for ease of  
use while the IF covers DC to 4 GHz. The HMC798LC4  
eliminates the need for wire bonding, allowing use of  
surface mount manufacturing techniques.  
Electrical Specifications, TA = +25°C, Vcc = 5V  
IF = 1 GHz  
LO = 4 dBm  
IF = 1 GHz  
LO = 4 dBm  
Parameter  
Units  
Min.  
Typ.  
24 - 29.5  
12 - 16  
DC - 4  
11  
Max.  
13  
Min.  
Typ.  
Max.  
12  
Frequency Range, RF  
Frequency Range, LO  
Frequency Range, IF  
Conversion Loss  
29.5 - 34  
GHz  
GHz  
GHz  
dB  
13.5 - 17.75  
DC - 4  
10  
2LO to RF Isolation  
2LO to IF Isolation  
IP3 (Input)  
25  
17  
30  
20  
19  
25  
dB  
45  
35  
dB  
20  
22  
dBm  
dBm  
mA  
1 dB Compression (Input)  
Supply Current (Idd)  
10  
12  
95  
125  
95  
125  
*Unless otherwise noted, all measurements performed as upconverter, IF= 1 GHz, LO = 4 dBm  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
10 - 346  
HMC798LC4  
v03.0110  
GaAs MMIC SUB-HARMONIC  
SMT MIXER, 24 - 34 GHz  
Conversion Gain vs. Temperature, LSB  
Conversion Gain vs. Temperature, USB  
-4  
-4  
-6  
-6  
-8  
-8  
-10  
-12  
-10  
-12  
10  
-14  
-14  
-16  
-18  
-20  
+25 C  
+85 C  
-40 C  
+25 C  
+85 C  
-40 C  
-16  
-18  
-20  
23 24 25 26 27 28 29 30 31 32 33 34 35  
FREQUENCY (GHz)  
23 24 25 26 27 28 29 30 31 32 33 34 35  
FREQUENCY (GHz)  
Conversion Gain vs. LO Drive, LSB  
Isolations  
-4  
0
2LO/RF  
2LO/IF  
LO/RF  
IF/RF  
-6  
-10  
-20  
-30  
-40  
-50  
-60  
-70  
-8  
LO/IF  
-10  
-12  
-14  
-16  
-18  
-20  
6 dBm  
4 dBm  
2 dBm  
23 24 25 26 27 28 29 30 31 32 33 34 35  
FREQUENCY (GHz)  
23 24 25 26 27 28 29 30 31 32 33 34 35  
FREQUENCY (GHz)  
Input IP3 vs. LO Drive  
Input IP3 vs. Temperature  
24  
24  
22  
20  
18  
16  
14  
12  
10  
22  
20  
18  
16  
6 dBm  
4 dBm  
2 dBm  
+25 C  
+85 C  
-40 C  
14  
12  
10  
23 24 25 26 27 28 29 30 31 32 33 34 35  
FREQUENCY (GHz)  
23 24 25 26 27 28 29 30 31 32 33 34 35  
FREQUENCY (GHz)  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
10 - 347  
HMC798LC4  
v03.0110  
GaAs MMIC SUB-HARMONIC  
SMT MIXER, 24 - 34 GHz  
Input IP2 vs. LO Drive  
Input IP2 vs. Temperature  
80  
75  
70  
65  
60  
55  
50  
45  
40  
80  
75  
70  
65  
60  
10  
55  
6 dBm  
4 dBm  
2 dBm  
+25 C  
+85 C  
-40 C  
50  
45  
40  
23 24 25 26 27 28 29 30 31 32 33 34 35  
FREQUENCY (GHz)  
23 24 25 26 27 28 29 30 31 32 33 34 35  
FREQUENCY (GHz)  
Input P1dB vs. Temperature, USB  
Input P1dB vs. Temperature, LSB  
18  
16  
14  
12  
10  
8
18  
16  
14  
12  
10  
8
6
6
+25 C  
+25 C  
+85 C  
+85 C  
-40 C  
-40 C  
4
4
2
0
2
0
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
FREQUENCY (GHz)  
FREQUENCY (GHz)  
Conversion Gain vs. IF Frequency, LSB  
Conversion Gain vs. IF Frequency, USB  
-4  
-4  
-6  
-6  
-8  
-8  
-10  
-12  
-10  
-12  
-14  
-14  
1000 MHz  
1000 MHz  
2000 MHz  
3750 MHz  
2000 MHz  
3750 MHz  
-16  
-18  
-20  
-16  
-18  
-20  
23 24 25 26 27 28 29 30 31 32 33 34 35  
RF FREQUENCY (GHz)  
23 24 25 26 27 28 29 30 31 32 33 34 35  
RF FREQUENCY (GHz)  
* Two-tone input power = 0 dBm each tone, 1 MHz spacing.  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
10 - 348  
HMC798LC4  
v03.0110  
GaAs MMIC SUB-HARMONIC  
SMT MIXER, 24 - 34 GHz  
IF Return Loss  
RF Return Loss  
0
0
25 C  
85 C  
-40 C  
-4  
-4  
-8  
-8  
10  
-12  
-16  
-20  
-12  
-16  
-20  
+25 C  
+85 C  
-40 C  
20  
22  
24  
26  
28  
30  
32  
34  
36  
38  
40  
0
1
2
3
4
5
FREQUENCY (GHz)  
FREQUENCY (GHz)  
MxN Spurious Outputs  
@ RF Port, Vdd = 5V  
LO Return Loss  
0
nLO  
1
mIF  
-3  
-2  
-1  
0
2
68  
53  
0
0
-5  
-10  
-15  
-20  
-25  
-30  
71  
49  
31  
45  
66  
66  
32  
1
+25 C  
+85 C  
-40 C  
1
1
31  
65  
2
54  
66  
3
IF = 2 GHz @ -10 dBm  
LO = 15 GHz @ 4 dBm  
All values in dBc below IF power level (2LO - 1IF)  
Measured as upconverter  
8
9
10 11 12 13 14 15 16 17 18 19 20  
FREQUENCY (GHz)  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
10 - 349  
HMC798LC4  
v03.0110  
GaAs MMIC SUB-HARMONIC  
SMT MIXER, 24 - 34 GHz  
Absolute Maximum Ratings  
RF / IF Input (Vdd = +5V)  
LO Drive (Vdd = +5V)  
Vdd  
+13 dBm  
ELECTROSTATIC SENSITIVE DEVICE  
OBSERVE HANDLING PRECAUTIONS  
+10 dBm  
5.5V  
Channel Temperature  
175 °C  
10  
Continuous Pdiss (Ta = 85 °C)  
(derate 8.33 mW/°C above 85 °C)  
0.75 mW  
119 °C/W  
Thermal Resistance  
(junction to ground paddle)  
Storage Temperature  
Operating Temperature  
-65 to +150 °C  
-40 to +85 °C  
Outline Drawing  
NOTES:  
1. PACKAGE BODY MATERIAL: ALUMINA.  
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL.  
3. DIMENSIONS ARE IN INCHES (MILLIMETERS).  
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.  
5. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, BLACK INK,  
OR LASER MARK LOCATED APPROX. AS SHOWN.  
6. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C –  
7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED  
TO PCB RF GROUND.  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
10 - 350  
HMC798LC4  
v03.0110  
GaAs MMIC SUB-HARMONIC  
SMT MIXER, 24 - 34 GHz  
Pin Descriptions  
Pin Number  
Function  
Description  
Interface Schematic  
1, 4, 6, 7, 9,  
12 - 14, 16, 18,  
19, 24  
These pins and package bottom must be  
connected to RF/DC ground.  
GND  
10  
No connection required. The pins are not connected internally;  
however, all data shown herein was measured with these pins  
connected to RF/DC ground externally.  
2, 3, 10, 17,  
20 - 23  
N/C  
IF  
This pin is DC coupled and should be DC blocked externally using  
a series capacitor whose value has been chosen to pass the  
necessary IF frequency range. Any applied DC voltage to this pin  
will result in die non-function and possible die failure.  
5
This pin is DC coupled  
and matched to 50 Ohms.  
8
RF  
Vcc  
LO  
11  
15  
Power supply for the LO Amplifier.  
This pin is DC blocked  
and matched to 50 Ohms.  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
10 - 351  
HMC798LC4  
v03.0110  
GaAs MMIC SUB-HARMONIC  
SMT MIXER, 24 - 34 GHz  
Evaluation PCB  
10  
[1]  
List of Materials for Evaluation PCB 126601  
The circuit board used in this application should use  
RF circuit design techniques. Signal lines should  
have 50 Ohm impedance while the package ground  
leads and exposed paddle should be connected  
directly to the ground plane similar to that shown.  
A sufficient number of via holes should be used to  
connect the top and bottom ground planes. The  
evaluation board should be mounted to an appro-  
priate heat sink. The evaluation circuit board shown  
is available from Hittite upon request.  
Item  
J1 - J3  
J2, J3  
J4, J5  
C1  
Description  
PCB Mount SMA RF Connector  
PCB Mount SRI K Connector  
DC Pin  
100 pF Capacitor, 0402 Pkg.  
10,000 pF Capacitor, 0603 Pkg.  
4.7 μF Tantalum Capacitor, Case A  
HMC798LC4 Mixer  
C2  
C3  
U1  
[2]  
PCB  
126598 Evaluation PCB  
[1] Reference this number when ordering complete evaluation PCB  
[2] Circuit Board Material: Arlon 25FR or Rogers 4350  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
10 - 352  
HMC798LC4  
v03.0110  
GaAs MMIC SUB-HARMONIC  
SMT MIXER, 24 - 34 GHz  
Notes:  
10  
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:  
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373  
Order On-line at www.hittite.com  
10 - 353  

相关型号:

HMC798LC4_1007

GaAs MMIC SUB-HARMONIC SMT MIXER, 24 - 34 GHz
HITTITE

HMC7992LP3DE

Nonreflective, Silicon SP4T Switch, 0.1 GHz to 6.0 GHz
ADI

HMC7992LP3DETR

Nonreflective, Silicon SP4T Switch, 0.1 GHz to 6.0 GHz
ADI

HMC799LP3E

DC - 700 MHz, 10 kOhm TRANSIMPEDANCE AMPLIFIER
HITTITE

HMC799LP3E

DC - 700 MHz, 10 kOhm Transimpedance Amplifier SMT
ADI

HMC799LP3ETR

DC - 700 MHz, 10 kOhm Transimpedance Amplifier SMT
ADI

HMC799LP3E_1

DC - 700 MHz, 10 kOhm TRANSIMPEDANCE AMPLIFIER
HITTITE

HMC799LP3E_10

DC - 700 MHz, 10 kOhm TRANSIMPEDANCE AMPLIFIER
HITTITE

HMC800LP3E

10 dB GaAs MMIC 1-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, DC - 10 GHz
HITTITE

HMC800LP3ETR

Variable Attenuator, GAAS
HITTITE

HMC801LP3E

15 dB GaAs MMIC 1-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, DC - 10 GHz
HITTITE

HMC801LP3ETR

RF/MICROWAVE VARIABLE ATTENUATOR
ADI