HI-8190PDI [HOLTIC]
12, Quad, SPST, 3.3V / 5.0V compatible Analog Switch; 12'四路, SPST , 3.3V / 5.0V兼容模拟开关型号: | HI-8190PDI |
厂家: | HOLT INTEGRATED CIRCUITS |
描述: | 12, Quad, SPST, 3.3V / 5.0V compatible Analog Switch |
文件: | 总9页 (文件大小:74K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HI-8190, HI-8191, HI-8192
12W, Quad, SPST, 3.3V / 5.0V compatible
Analog Switch
October 2011
FEATURES
GENERALDESCRIPTION
The HI-8190 is a quad analog CMOS switch fabricated with Sili-
con-on-Insulator (SOI) technology for latch-up free operation
and maximum switch isolation. The switch voltages can range
from bipolar 3.3V to 15V or single ended from 3.3V to 15V.
The logic supply can range from 3.3V to 5.0V. The HI-8190 pro-
vides four each normally open switches when the switch control
inputs are Low. The HI-8191 provides four each normally
closed switches when the switch control inputs are Low. The HI-
8192 provides a combination of two normally On and two nor-
mally Off switches. The limits of the operating range are de-
fined by the V+/V- bias voltage.
·
3.3V to 15V CMOS analog switches
· Low RON: 12 W to 15 W typical
· Robust CMOS Silicon-on-Insulator (SOI) technology
· SOI switch isolation with 1nA typical Off leakage
· Superior ESD protection > 4KV HBM
· Fast switching time with break-before-make
· Low power
· Extended Temperature Range (-55°C to +125°C)
On-resistance of each switch depends upon only the VLOGIC
selection.At 5V, RON ranges from 10Wto 17W while at 3.3V sup-
ply RON ranges from 10W to 22W. Each switch is designed using
back to back high voltage transistors. Switch transistors are
symmetrical and conduct equally well in either direction. Signal
range can run the full rails. Off leakages are very low (1 nA typi-
cal) and charge injection is less than 3 pC. Switch ESD toler-
ance is greater than 4 KV.
PIN CONFIGURATIONS (Top Views)
IN1 1
S1A 2
S1B 3
V- 4
16 IN2
15 S2A
14 S2B
13 V+
GND 5
S4B 6
S4A 7
IN4 8
12 VLOGIC
11 S3B
10 S3A
The Off state is achieved first before any On condition is ap-
plied. Switching times with a 3.3V VLOGIC supply are typically
35 ns to the On state and 20 ns to the Off state.
9
IN3
Industry-standard plastic package options include 16-pin
TSSOP, SO, DIP and 16-pin QFN. Ceramic packaging is avail-
able on request. All three products are offered in both Industrial
(-40°C to +85°C) and extended (-55°C to +125°C) temperature
range options.
HI-8190PSx, HI-8190PDx
16-Pin SO or DIP package
S1B
V-
1
2
3
4
12 S2B
11 V+
GND
S4B
10 VLOGIC
9
S3B
APPLICATIONS
· Data bus isolation
· Sample-and-Hold circuits
· Test Equipment
HI-8190PCx
16-pin 5mm x 5mm Chip-scale package
· Communications Systems
· Battery operated Systems
· PBX, PABX
PRODUCT OPTIONS
PART TYPE IN1 Switch 1 IN2 Switch 2 IN3 Switch 3 IN4 Switch 4
HI-8190
HI-8191
HI-8192
0
1
0
1
0
1
Open
Closed
Closed
Open
0
1
0
1
0
1
Open
Closed
Closed
Open
0
1
0
1
0
1
Open
Closed
Closed
Open
0
1
0
1
0
1
Open
Closed
Closed
Open
· Audio Signal Routing
· Data Acquisition Systems
· xDSL Modems
Open
Closed
Open
Closed
Open
Open
· Avionics
Closed
Closed
HOLT INTEGRATED CIRCUITS
www.holtic.com
(DS8190 Rev. New)
10/11
HI-8190, HI-8191, HI-8192
PIN DESCRIPTIONS
SIGNAL
IN1
FUNCTION
Logic Input
Switch Node
Switch Node
Supply
DESCRIPTION
HI-8190 and HI-8192 are normally Open when input Low
Switch 1 Node
S1A
S1B
V-
Switch 1 Node
Negative supply for Bipolar configuration. GND for Unipolar use
Reference Ground
GND
S4B
S4A
IN4
Supply
Switch Node
Switch Node
Logic Input
Logic Input
Switch Node
Switch Node
Supply
Switch 4 Node
Switch 4 Node
HI-8190 and HI-8192 are normally Open when input Low
HI-8191 and HI-8192 are normally Closed when input Low
Switch 3 Node
IN3
S3A
S3B
VLOGIC
V+
Switch 3 Node
3.3V or 5.0V Logic supply
Supply
Positive supply for Bipolar and Unipolar configurations
Switch 2 Node
S2B
S1B
IN2
Switch Node
Switch Node
Logic input
Switch 2 Node
HI-8191 and HI-8192 are normally Closed when input Low
24W
24W
22W
22W
20W
18W
16W
14W
12W
10W
8W
VLOGIC = 3.3V
T = +125°C
T = +25°C
20W
18W
16W
14W
12W
10W
8W
VLOGIC = 5.0V
T = -55°C
-15V
-10V
-5V
0V
5V
10V
15V
-15V
-10V
-5V
0V
5V
10V
15V
VSWITCH
VSWITCH
Typical RON as a function of VLOGIC and VSWITCH
(10mA switch current, 25°C)
Typical RON as a function of VSWITCH and
Temperature (10mA switch current)
VLOGIC = 5V
HOLT INTEGRATED CIRCUITS
2
HI-8190, HI-8191, HI-8192
ABSOLUTE MAXIMUM RATINGS
(Voltages referenced to GND = 0V)
Supply Voltage, V+: ............................................................................16.5V Continuous Power Dissipation (TA=70°C):
Supply Voltage, V-:.............................................................................-16.5V
Supply Volgate, VLOGIC .........................................................................5.5V
Switch Current (either direction):.........................................................50mA
Peak Switch Current (1 ms pulse, 10% duty cycle max.)..................200mA
Digital Input Voltage (IN1-4):.....................................-0.3V to VLOGIC + 0.3V
SO Package (derate 6.7mW/°C above 70°C)...................696mW
Plastic DIP (derate 10.53 mw/°C above 70°C) .................842mW
Thin QFN (derate 21.3mW/°C above 70°C) ...................1702mW
Storage Temperature Range: ......................................-65°C to +150°C
Soldering Temperature:
(Ceramic)......................60 sec. at +300°C
(Plastic - leads).............10 sec. at +280°C
(Plastic - body) .....................+260°C Max.
Operating Temperature Range: (Industrial)..........................-40°C to +85°C
(Hi-Temp)........................-55°C to +125°C
Maximum Junction Temperature ........................................................175°C
NOTE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only.
Functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
V+ = 15V, V- = -15V, GND = 0V. Operating temperature range (unless otherwise noted).
VLOGIC = 3.3V
VLOGIC = 5.0V
PARAMETER
SYMBOL
CONDITIONS
FIGURE
UNIT
MIN
TYP
MAX
MIN
TYP MAX
SWITCH PARAMETERS
Switch Signal Range
Switch Resistance
VRANGE
RON
-15
+15
V
25°C, 10mA
-55°C to +125°C, 10mA
1
1
10
8
22
26
10
8
17
20
W
W
Leakage
|ISWLEAK|
|ISWLEAK|
Switch voltage 15V, 25°C
Switch voltage 15V, 125°
2
2
2
5
5
nA
nA
nA
20
20
|ISWLEAK| Switch voltage 15V, -55°C
150
150
LOGIC INPUTS
Input High Voltage
Input Low Voltage
Input Current
VIH
VIL
70
70
%VLOGIC
%VLOGIC
µA
30
30
IIN
VIN = 0V or VIN=VLOGIC
-0.5
0.5
-0.5
0.5
SUPPLY
VLOGIC Current
V+ Current
IDD1
IDD2
IEE
Any state
Any state
Any state
0.5
0.5
0.5
0.5
µA
µA
µA
V- Current
-0.5
-0.5
DYNAMIC PARAMETERS
Turn On Time
TON
TOFF
TD
V+/V- = 10V, 25°C
VS = 10V, -55°C to +125°C
3
3
55
35
8
35
55
ns
ns
75
40
Turn Off time
V+/V- = 10V, 25°C
VS = 10V, -55°C to +125°C
3
3
20
25
ns
ns
Break-Before-Make Time
10V signal, 25°C
10V signal, -55°C to +125°C
4
4
8
ns
ns
4
4
Charge Injection
Off Isolation
Crosstalk
Q
VS=0V, RS=0W, 25°C
f = 1 MHz, 25°C
5
6
7
4
4
pC
dB
dB
RR
CR
65
90
65
90
f = 1 MHz, 25°C
Capacitance
COFF
CON
Switch Off, 25°C
Switch On, 25°C
8
9
5
20
5
20
pF
pF
HOLT INTEGRATED CIRCUITS
3
HI-8190, HI-8191, HI-8192
TEST CIRCUITS
IDS
V1
IS(OFF)
ID(OFF)
SA
SB
SA
SB
A
A
+
+
+
-
RON = V1/IDS
VS
-
VS
-
VD
Figure 1 - On Resistance
Figure 2 - Off Leakage
+5V +15V
0.1µF
0.1µF
V
IN (HI-8191)
IN (HI-8190)
50%
50%
50%
50%
VLOGIC V+
V
SA
IN
SB
VOUT
90%
300W
35pF
GND
V-
+
-
50%
VS
V
OUT
0.1µF
-15V
t ON
t OFF
Figure 3. Switching Times
+5V +15V
VLOGIC V+
0.1µF
0.1µF
5V
V
IN
50%
50%
0V
S1A
S1B
S2B
VS1
VS2
VOUT1
VOUT2
90%
S2A
IN
50%
V
OUT1
OUT2
300W
35pF
300W
35pF
0.1µF
GND
V-
90%
V
50%
-15V
t D
t D
Figure 4. Break-Before-Make Time Delay (HI-8192)
HOLT INTEGRATED CIRCUITS
4
HI-8190, HI-8191, HI-8192
+5V +15V
VLOGIC V+
RS
SA
IN
SB
VOUT
V
IN
CL
10nF
GND
V-
+
-
VS
V
OUT
DVOUT
-15V
QINJ = CL x DVOUT
Figure 5. Charge Injection
+5V +15V
VLOGIC V+
0.1µF
0.1µF
+5V +15V
VLOGIC V+
0.1µF
0.1µF
SA1
SB1
50W
IN1
SA
SB
VOUT
VS
IN
IN2
50W
GND
V-
VS
SB2
SA2
0.1µF
VOUT
50W
NC
-15V
GND
V-
0.1µF
-15V
Figure 6 - Off Isolation
Figure 7 - Channel-to-Channel Crosstalk
+5V +15V
VLOGIC V+
+5V +15V
0.1µF
0.1µF
0.1µF
0.1µF
VLOGIC V+
SA SB
SA
SB
VS
Capacitance
Meter
f=1MHz
Capacitance
Meter
f=1MHz
IN
IN
GND
V-
GND
V-
0.1µF
0.1µF
-15V
-15V
Figure 8 - Off Capacitance
Figure 9 - On Capacitance
HOLT INTEGRATED CIRCUITS
5
HI-8190, HI-8191, HI-8192
ORDERING INFORMATION
HI - 819x xx x x
LEAD
PART
NUMBER
FINISH
Tin / Lead (Sn / Pb) Solder
Blank
F
100% Matte Tin (Pb-free, RoHS compliant)
PART
NUMBER
TEMPERATURE
RANGE
FLOW
BURN
IN
I
-40°C TO +85°C
-55°C TO +125°C
I
NO
NO
T
T
M
-55°C TO +125°C
M
YES
PART
NUMBER
PACKAGE
DESCRIPTION
16 PIN PLASTIC 5 x 5 mm CHIP SCALE (16PCS1) (No M-flow)
16 PIN PLASTIC NARROW BODY SOIC (16HN)
16 PIN PLASTIC DIP (16P)
PC
PS
PD
PART
NUMBER
FUNCTION
QUAD SWITCH, NORMALLY OPEN
8190
8191
QUAD SWITCH, NORMALLY CLOSED
8192
QUAD SWITCH, TWO NORMALLY OPEN, TWO NORMALLY CLOSED
HOLT INTEGRATED CIRCUITS
6
HI-8190, HI-8191, HI-8192
REVISION HISTORY
P/N
Rev
Date
Description of Change
DS8190 New 10/26/11 Initial release
HOLT INTEGRATED CIRCUITS
7
HI-8190 PACKAGE DIMENSIONS
16-PIN PLASTIC SMALL OUTLINE (SOIC) - NB
(Narrow Body)
inches (millimeters)
Package Type: 16HN
.0087 .0012
(.220 .029)
.390 .004
(9.90 .10)
.236 ±.008
(5.99 ±.20)
.1525 .0025
(3.87 .06)
Top View
See Detail A
.0165 .003
(.419 .089)
.061 .007
(1.549 .178)
.050
BSC
(1.27)
0° to 8°
.0069 .0029
(.176 .074)
.033 .017
(.838 .432)
Detail A
BSC = “Basic Spacing between Centers”
is theoretical true position dimension and
has no tolerance. (JEDEC Standard 95)
16-PIN PLASTIC CHIP-SCALE PACKAGE
millimeters
Package Type: 16PCS1
Electrically isolated metal
heat sink on bottom of
package
3.38 0.05
(0.133 0.002)
Connect to any ground or
power plane for optimum
thermal dissipation
Bottom
View
Top View
5.00 0.05
(0.197 0.002)
.50 0.05
(0.020 0.002)
0.20
(0.008)
min.
0.75 0.05
(0.03 0.002)
0.203
REF.
(0.008)
0.025 0.025
(0.001 0.001)
0.30 0.05
(0.012 0.002)
0.80
(0.031)
BSC
BSC = “Basic Spacing between Centers”
is theoretical true position dimension and
has no tolerance. (JEDEC Standard 95)
HOLT INTEGRATED CIRCUITS
8
HI-8190 PACKAGE DIMENSIONS
16-PIN PLASTIC DIP
Package Type:
16P
0.745 (18.923)
0.810 (20.574)
0.240 (6.096)
0.260 (6.604)
0.290 (7.366)
0.310 (7.874)
0.015 (0.381)
0.035 (0.889)
0.120 (3.048)
0.150 (3.810)
0.008 (0.203)
0.015 (0.381)
0.125 (3.175)
0.150 (3.810)
0.015 (0.381)
0.023 (0.584)
0.300 (7.620)
0.370 (9.398)
0.100 (2.54) BSC.
0.045 (1.143)
0.065 (1.651)
inches (millimeters)
HOLT INTEGRATED CIRCUITS
9
相关型号:
©2020 ICPDF网 联系我们和版权申明