180007GK4L
更新时间:2024-09-18 17:13:14
品牌:HONEYWELL
描述:Peizoresistive Sensor, Gage, 0Psi Min, 30Psi Max, 0.50-120mV, Round, Through Hole Mount, TO-8
180007GK4L 概述
Peizoresistive Sensor, Gage, 0Psi Min, 30Psi Max, 0.50-120mV, Round, Through Hole Mount, TO-8 压力传感器
180007GK4L 规格参数
生命周期: | Obsolete | Reach Compliance Code: | unknown |
风险等级: | 5.82 | 主体高度: | 6.7 mm |
主体长度或直径: | 11.43 mm | 线性度 (%): | 0.2 % |
安装特点: | THROUGH HOLE MOUNT | 标称偏移: | 0.50MV |
最高工作温度: | 121 °C | 最低工作温度: | -40 °C |
输出范围: | 0.50-120mV | 封装形状/形式: | ROUND |
最大压力范围: | 30 Psi | 最小压力范围: | |
压力传感模式: | GAGE | 响应时间: | 1000 µs |
传感器/换能器类型: | PRESSURE SENSOR,PEIZORESISTIVE | 最大供电电压: | 15 V |
表面贴装: | NO | 端接类型: | SOLDER |
Base Number Matches: | 1 |
180007GK4L 数据手册
通过下载180007GK4L数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载1800/1805 Series
TO-8, 0 psi to 3 psi, 0 psi to
150 psi Silicon Pressure
Sensors
DESCRIPTION
The 1800/1805 Series contains a solid state piezoresistive
pressure sensor mounted in a standard TO-8 package. They
are printed circuit board and pin-for-pin compatible with other
TO-8 pressure sensors.
The 1800/1805 Series sensors are high performance TO-8
pressure transducers specifically designed to address a variety
of both low and medium pressure original equipment
manufacture applications.
The transducers offer two performance grades and a variety of
compensation options, including span and calibration to within
±± mV (normalized output). The 1800/1805 Series can operate
with either constant current or voltage excitation.
FEATURES
POTENTIAL APPLICATIONS
•
Standard pressure ranges from 0 psi to 3 psi, 0 psi to
150 psi
•
•
•
•
•
Instrumentation calibration
Avionics/aerospace
Medical equipment
HVAC
•
•
•
Gauge, absolute or differential models
Voltage or constant current excitation
Choice of temperature compensation options
Pneumatic controls
–
–
–
Laser trim, normalized output
Laser trim, standard output
Resistor compensation
•
Uncompensated version available for microprocessor-
based designs
1800/1805 Series
TO-8, 0 psi to 3 psi, 0 psi to 150 psi
ENVIRONMENTAL SPECIFICATIONS (All devices)
Characteristic
Supply voltage, VS
Compensated temperature range
Operating temperature tange
Vibration
Parameter
10 Vdc
-1 °C to 54 °C [34 °F to 1±9 °F]
-40 °C to 1±1 °C [-40 °F to ±57 °F]
10 g rms at ±0 Hz to ±00 Hz
100 g for 11 ms
Characteristic
Insulation resistance
Humidity
Common-mode pressure
Max. soldering temperature
Excitation voltage VS
Excitation current
Parameter
100 MOhm at 50 Vdc
50 % ± 10 %
150 psig
±60 °C [500 °F] 10 s max.
Supply voltage Vs =15 Vdc max.
Supply current Is = ± mA max.
Shock
Life
100 million cycles
PERFORMANCE CHARACTERISTICS(1)
Characteristic
Min.
–
–
Typ.
–
–
Max.
±0.5
±1
Unit
mV
mV
Zero pressure offset(1)
Zero pressure offset (3 psi to 5 only)(1)
Full-scale span(±)
Standard output–current excitation
Standard output–voltage excitation
Normalized output–current excitation
Normalized output–current excitation (3 psi only)
Normalized output–voltage excitation
Pressure non-linearity(3)
75
40
98
73
38
–
–
–
–
–
–
–
–
–
150
1±0
10±
77
mV
mV
mV
mV
mV
%FSS
%FSS
%FSS
mV
mV
mV
–
4±
±0.15
–
–
–
–
–
–
±0.1
–
–
±0.±0
±0.01±5
±0.01±5
±0.5
±1
±0.5
±1
–
Pressure hysteresis(3)
Repeatability
Temperature effect on offset(4)
Temperature effect on offset (3 psi and 5 psi only)(4)
Temperature effect on span
Temperature effect on span (3 psi and 5 psi only)(4)
Thermal hysteresis
–
mV
%FSS
ms
–
–
–
Response time(5)
1
±0.±
Long term stability of offset and span(6)
Common mode voltage(7)
%FSS
Standard output–current excitation
Standard output–voltage excitation
Normalized output–current excitation
Normalized output–voltage excitation
Input resistance
–
–
–
–
–
50 %
50 %
35 %
±5 %
–
–
–
–
–
–
input
input
input
input
–
Current excitation
Voltage excitation
Output resistance
±.0
8.0
3.5
–
–
–
8.0
40
6.0
kΩ
kΩ
kΩ
PRESSURE RANGE SPECIFICATIONS
Catalog Listing
Pressure Range
Top Side Overpressure(8)
Bottom Side Overpressure(9)
1805-00 (G,D) - (K,L) (0..4) (M,L,N)
1805-01 (G,D) - (K,L) (0..4) (M,L,N)
1800-0± (G,D) - (K,L) (0..4) (M,L,N)
1800-03 (G,D) - (K,L) (0..4) (M,L,N)
1800-07 (G,D) - (K,L) (0..4) (M,L,N)
1800-08 (G,D) - (K,L) (0..4) (M,L,N)
1800-09 (G,D) - (K,L) (0..4) (M,L,N)
1800-10 (G,D) - (K,L) (0..4) (M,L,N)
0 psi to 3 psi
0 psi to 5 psi
15 psi
±5 psi
50 psi
9 psi
15 psi
30 psi
45 psi
50 psi
50 psi
50 psi
50 psi
0 psi to 10 psi
0 psi to 15 psi
0 psi to 30 psi
0 psi to 50 psi
0 psi to 100 psi
0 psi to 150 psi
65 psi
±50 psi
350 psi
350 psi
350 psi
Notes:
1. Reference conditions (unless otherwise noted); TA = ±5 °C [77 °F], Supply VS = 10 Vdc ±0.01 Vdc or IS = 1.5 mA ±0.0015 mA.
±. Full-scale span (FSS) is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure. FFS is
ratiometric to the supply voltage.
3. Pressure non-linearity is based on best-fit straight line from the zero to the full-scale pressure. Pressure hysteresis is the maximum output
difference at any point within the operating pressure range for increasing and decreasing pressure.
4. Maximum error band of the offset voltage or span over the compensated temperature range, relative to the ±5 °C [77 °F] reading.
5. Response time for a 0 psi to full-scale span pressure step change, 10 % to 90 % rise time.
6. Long term stability over a six month period.
7. Common mode voltage as measured from output to ground. For higher levels of common mode voltage, contact the factory.
8. Pressure overrange: Top: 5 x full-scale pressure or ≤350 psi, whichever is less.
9. Pressure overrange: Bottom: 3 x full-scale or ≤50 psi, whichever is less.
±
www.honeywell.com/sensing
Silicon Pressure Sensors
STANDARD COMPENSATION AND TRIM CHOICES
For maximum convenience, the 1800/1805 Series is
temperature compensated from -1 °C to 54 °C [34 °F to
1±9 °F]. Other temperature ranges are available upon request.
Laser Trim: Compensation is accomplished by using an in-
house laser trim facility that allows for tighter product
performance control and improved flexibility in response to
special customer performance requirements.
Normalized Output Option: For design convenience and
sensor interchangeability, the 1800/1805 Series is available
with normalized output (100 ±± mV dc in current excited
versions with pressure range >3 psi). Normalized output for
current excited 3 psi devices is 75 ±± mV dc.
Resistors: This option includes a printout of suggested
temperature compensation and zero offset resistor values for
each individual sensor.
ELECTRICAL CONNECTIONS
CURRENT EXCITATION
VOLTAGE EXCITATION
Pin 1 on normalized and voltage
excited standard output.
Normalized output shown.
Standard output on pin 5 R6 shorted.
R5 open for standard output.
EXTERNAL CONNECTIONS
POSITIVE PRESSURE ON TOP AND BOTTOM SIDES
Current Excitation – Standard Output Voltage Excitation – Standard Output
Discrete Resistor Laser Trim Board Discrete Resistor Laser Trim Board
Current or Voltage Excitation –
Normalized Output
Laser Trim Board
Pin
4
5
Connection
+ Output
+ Input
- Input
- Output
NC
Pin
4
5
Connection
+ Output
+ Input
- Input
- Output
NC
Pin
4
5
Connection
Pin
4
5
Connection
+ Output
NC
- Input
- Output
NC
Pin
4
5
Connection
+ Output
NC
- Input
+ Output
NC
+ Output
+ Input
- Input
- Output
NC
6
6
6
6
6
10
11
1±
10
11
1±
10
11
1±
10
11
1±
1
10
11
1±
1
NC
NC
NC
NC
+ Input
NC
+ Input
PRESSURE CONNECTION OPTIONS
OPTION 0 OPTION 1
OPTION 2
OPTION 4
Honeywell Sensing and Control
3
ORDER GUIDE
1800/1805
02
A
L
1
L
Compensation
Series
1800/1805
L: Laser trimmed, standard output
N: Laser trimmed, normalized output
M: Computer printout of resistor values
Pressure Range
For Model 1800 For Model 1805
Pressure Connections
02: 0 psi to 10 psi
03: 0 psi to 15 psi
07: 0 psi to 30 psi
08: 0 psi to 50 psi
00: 0 psi to 3 psi
01: 0 psi to 5 psi
Top
Bottom
none
1/8 in tube
none
0: 3/16 in tube
1: 3/16 hole
2: 3/16 in hole
4: 3/16 in tube
09: 0 psi to 100 psi (G and A only)
10: 0 psi to 150 psi (G only)
1/8 in tube
Excitation
L: Current
K: Voltage
Sensor Type
G: Gage
A: Absolute
D: Differential
Note:
Transducer recommended for use with non-corrosive, non-condensing gases.
WARNING
PERSONAL INJURY
WARNING
MISUSE OF DOCUMENTATION
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
•
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
Failure to comply with these instructions could result in
death or serious injury.
•
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s
standard product warranty applies unless agreed to otherwise
by Honeywell in writing; please refer to your order
acknowledgement or consult your local sales office for specific
warranty details. If warranted goods are returned to Honeywell
during the period of coverage, Honeywell will repair or replace,
at its option, without charge those items it finds defective. The
foregoing is buyer’s sole remedy and is in lieu of all other
warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special,
or indirect damages.
SALES AND SERVICE
Honeywell serves its customers through a worldwide network
of sales offices, representatives and distributors. For
application assistance, current specifications, pricing or name
of the nearest Authorized Distributor, contact your local sales
office or:
E-mail: info.sc@honeywell.com
Internet: www.honeywell.com/sensing
Phone and Fax:
Asia Pacific
+65 6355-±8±8
While we provide application assistance personally, through
our literature and the Honeywell web site, it is up to the
customer to determine the suitability of the product in the
application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this
printing. However, we assume no responsibility for its use.
+65 6445-3033 Fax
+44 (0) 1698 481481
+44 (0) 1698 481676 Fax
+1-305-805-8188
+1-305-883-8±57 Fax
+1-800-537-6945
Europe
Latin America
USA/Canada
+1-815-±35-6847
+1-815-±35-6545 Fax
Automation and Control Solutions
Sensing and Control
Honeywell
11 West Spring Street
008137-±-EN IL50 GLO Printed in USA
October ±005
© ±005 Honeywell International Inc.
Freeport, Illinois 6103±
www.honeywell.com/sensing
180007GK4L 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
180007GK4N | HONEYWELL | Peizoresistive Sensor, Gage, 0Psi Min, 30Psi Max, 0.50-120mV, Round, Through Hole Mount, TO-8 | 获取价格 | |
180007GL0M | HONEYWELL | Peizoresistive Sensor, Gage, 0Psi Min, 30Psi Max, 0.50-150mV, Round, Through Hole Mount, TO-8 | 获取价格 | |
180007GL1L | HONEYWELL | Peizoresistive Sensor, Gage, 0Psi Min, 30Psi Max, 0.50-150mV, Round, Through Hole Mount, TO-8 | 获取价格 | |
180007GL1M | HONEYWELL | Peizoresistive Sensor, Gage, 0Psi Min, 30Psi Max, 0.50-150mV, Round, Through Hole Mount, TO-8 | 获取价格 | |
180007GL2L | HONEYWELL | Peizoresistive Sensor, Gage, 0Psi Min, 30Psi Max, 0.50-150mV, Round, Through Hole Mount, TO-8 | 获取价格 | |
180007GL2M | HONEYWELL | Peizoresistive Sensor, Gage, 0Psi Min, 30Psi Max, 0.50-150mV, Round, Through Hole Mount, TO-8 | 获取价格 | |
180007GL2N | HONEYWELL | Peizoresistive Sensor, Gage, 0Psi Min, 30Psi Max, 0.50-150mV, Round, Through Hole Mount, TO-8 | 获取价格 | |
180007GL4L | HONEYWELL | Peizoresistive Sensor, Gage, 0Psi Min, 30Psi Max, 0.50-150mV, Round, Through Hole Mount, TO-8 | 获取价格 | |
180007GL4M | HONEYWELL | Peizoresistive Sensor, Gage, 0Psi Min, 30Psi Max, 0.50-150mV, Round, Through Hole Mount, TO-8 | 获取价格 | |
180007GL4N | HONEYWELL | Peizoresistive Sensor, Gage, 0Psi Min, 30Psi Max, 0.50-150mV, Round, Through Hole Mount, TO-8 | 获取价格 |
180007GK4L 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6