180501DL4N [HONEYWELL]

Peizoresistive Sensor, Differential, 0Psi Min, 5Psi Max, 1-150mV, Round, Through Hole Mount, TO-8;


型号：	180501DL4N
厂家：	Honeywell
描述：	Peizoresistive Sensor, Differential, 0Psi Min, 5Psi Max, 1-150mV, Round, Through Hole Mount, TO-8 传感器换能器
文件：	总4页 (文件大小：339K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

1800/1805 Series

TO-8, 0 psi to 3 psi, 0 psi to

150 psi Silicon Pressure

Sensors

DESCRIPTION

The 1800/1805 Series contains a solid state piezoresistive

pressure sensor mounted in a standard TO-8 package. They

are printed circuit board and pin-for-pin compatible with other

TO-8 pressure sensors.

The 1800/1805 Series sensors are high performance TO-8

pressure transducers specifically designed to address a variety

of both low and medium pressure original equipment

manufacture applications.

The transducers offer two performance grades and a variety of

compensation options, including span and calibration to within

±± mV (normalized output). The 1800/1805 Series can operate

with either constant current or voltage excitation.

FEATURES

POTENTIAL APPLICATIONS

•

Standard pressure ranges from 0 psi to 3 psi, 0 psi to

150 psi

•

Instrumentation calibration

Avionics/aerospace

Medical equipment

HVAC

•

Gauge, absolute or differential models

Voltage or constant current excitation

Choice of temperature compensation options

Pneumatic controls

–

Laser trim, normalized output

Laser trim, standard output

Resistor compensation

•

Uncompensated version available for microprocessor-

based designs

1800/1805 Series

TO-8, 0 psi to 3 psi, 0 psi to 150 psi

ENVIRONMENTAL SPECIFICATIONS (All devices)

Characteristic

Supply voltage, V_S

Compensated temperature range

Operating temperature tange

Vibration

Parameter

10 Vdc

-1 °C to 54 °C [34 °F to 1±9 °F]

-40 °C to 1±1 °C [-40 °F to ±57 °F]

10 g rms at ±0 Hz to ±00 Hz

100 g for 11 ms

Characteristic

Insulation resistance

Humidity

Common-mode pressure

Max. soldering temperature

Excitation voltage V_S

Excitation current

Parameter

100 MOhm at 50 Vdc

50 % ± 10 %

150 psig

±60 °C [500 °F] 10 s max.

Supply voltage V_s=15 Vdc max.

Supply current I_s= ± mA max.

Shock

Life

100 million cycles

PERFORMANCE CHARACTERISTICS⁽¹⁾

Characteristic

Min.

–

Typ.

–

Max.

±0.5

±1

Unit

Zero pressure offset⁽¹⁾

Zero pressure offset (3 psi to 5 only)⁽¹⁾

Full-scale span^(±)

Standard output–current excitation

Standard output–voltage excitation

Normalized output–current excitation

Normalized output–current excitation (3 psi only)

Normalized output–voltage excitation

Pressure non-linearity⁽³⁾

–

150

1±0

10±

%FSS

–

4±

±0.15

–

±0.1

–

±0.±0

±0.01±5

±0.5

±1

±0.5

±1

–

Pressure hysteresis⁽³⁾

Repeatability

Temperature effect on offset⁽⁴⁾

Temperature effect on offset (3 psi and 5 psi only)⁽⁴⁾

Temperature effect on span

Temperature effect on span (3 psi and 5 psi only)⁽⁴⁾

Thermal hysteresis

–

%FSS

–

Response time⁽⁵⁾

±0.±

Long term stability of offset and span⁽⁶⁾

Common mode voltage⁽⁷⁾

%FSS

Standard output–current excitation

Standard output–voltage excitation

Normalized output–current excitation

Normalized output–voltage excitation

Input resistance

–

50 %

35 %

±5 %

–

input

–

Current excitation

Voltage excitation

Output resistance

±.0

8.0

3.5

–

8.0

6.0

kΩ

PRESSURE RANGE SPECIFICATIONS

Catalog Listing

Pressure Range

Top Side Overpressure⁽⁸⁾

Bottom Side Overpressure⁽⁹⁾

1805-00 (G,D) - (K,L) (0..4) (M,L,N)

1805-01 (G,D) - (K,L) (0..4) (M,L,N)

1800-0± (G,D) - (K,L) (0..4) (M,L,N)

1800-03 (G,D) - (K,L) (0..4) (M,L,N)

1800-07 (G,D) - (K,L) (0..4) (M,L,N)

1800-08 (G,D) - (K,L) (0..4) (M,L,N)

1800-09 (G,D) - (K,L) (0..4) (M,L,N)

1800-10 (G,D) - (K,L) (0..4) (M,L,N)

0 psi to 3 psi

0 psi to 5 psi

15 psi

±5 psi

50 psi

9 psi

15 psi

30 psi

45 psi

50 psi

0 psi to 10 psi

0 psi to 15 psi

0 psi to 30 psi

0 psi to 50 psi

0 psi to 100 psi

0 psi to 150 psi

65 psi

±50 psi

350 psi

Notes:

1. Reference conditions (unless otherwise noted); T_A= ±5 °C [77 °F], Supply V_S= 10 Vdc ±0.01 Vdc or I_S= 1.5 mA ±0.0015 mA.

±. Full-scale span (FSS) is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure. FFS is

ratiometric to the supply voltage.

3. Pressure non-linearity is based on best-fit straight line from the zero to the full-scale pressure. Pressure hysteresis is the maximum output

difference at any point within the operating pressure range for increasing and decreasing pressure.

4. Maximum error band of the offset voltage or span over the compensated temperature range, relative to the ±5 °C [77 °F] reading.

5. Response time for a 0 psi to full-scale span pressure step change, 10 % to 90 % rise time.

6. Long term stability over a six month period.

7. Common mode voltage as measured from output to ground. For higher levels of common mode voltage, contact the factory.

8. Pressure overrange: Top: 5 x full-scale pressure or ≤350 psi, whichever is less.

9. Pressure overrange: Bottom: 3 x full-scale or ≤50 psi, whichever is less.

www.honeywell.com/sensing

Silicon Pressure Sensors

STANDARD COMPENSATION AND TRIM CHOICES

For maximum convenience, the 1800/1805 Series is

temperature compensated from -1 °C to 54 °C [34 °F to

1±9 °F]. Other temperature ranges are available upon request.

Laser Trim: Compensation is accomplished by using an in-

house laser trim facility that allows for tighter product

performance control and improved flexibility in response to

special customer performance requirements.

Normalized Output Option: For design convenience and

sensor interchangeability, the 1800/1805 Series is available

with normalized output (100 ±± mV dc in current excited

versions with pressure range >3 psi). Normalized output for

current excited 3 psi devices is 75 ±± mV dc.

Resistors: This option includes a printout of suggested

temperature compensation and zero offset resistor values for

each individual sensor.

ELECTRICAL CONNECTIONS

CURRENT EXCITATION

VOLTAGE EXCITATION

Pin 1 on normalized and voltage

excited standard output.

Normalized output shown.

Standard output on pin 5 R6 shorted.

R5 open for standard output.

EXTERNAL CONNECTIONS

POSITIVE PRESSURE ON TOP AND BOTTOM SIDES

Current Excitation – Standard Output Voltage Excitation – Standard Output

Discrete Resistor Laser Trim Board Discrete Resistor Laser Trim Board

Current or Voltage Excitation –

Normalized Output

Laser Trim Board

Connection

+ Output

+ Input

- Input

- Output

Connection

+ Output

+ Input

- Input

- Output

Connection

+ Output

- Input

- Output

Connection

+ Output

- Input

+ Output

+ Input

- Input

- Output

1±

+ Input

PRESSURE CONNECTION OPTIONS

OPTION 0 OPTION 1

OPTION 2

OPTION 4

Honeywell Sensing and Control

ORDER GUIDE

1800/1805

Compensation

Series

1800/1805

L: Laser trimmed, standard output

N: Laser trimmed, normalized output

M: Computer printout of resistor values

Pressure Range

For Model 1800 For Model 1805

Pressure Connections

02: 0 psi to 10 psi

03: 0 psi to 15 psi

07: 0 psi to 30 psi

08: 0 psi to 50 psi

00: 0 psi to 3 psi

01: 0 psi to 5 psi

Top

Bottom

none

1/8 in tube

none

0: 3/16 in tube

1: 3/16 hole

2: 3/16 in hole

4: 3/16 in tube

09: 0 psi to 100 psi (G and A only)

10: 0 psi to 150 psi (G only)

1/8 in tube

Excitation

L: Current

K: Voltage

Sensor Type

G: Gage

A: Absolute

D: Differential

Note:

Transducer recommended for use with non-corrosive, non-condensing gases.

WARNING

PERSONAL INJURY

WARNING

MISUSE OF DOCUMENTATION

DO NOT USE these products as safety or emergency stop

devices or in any other application where failure of the

product could result in personal injury.

•

The information presented in this product sheet is for

reference only. Do not use this document as a product

installation guide.

Failure to comply with these instructions could result in

death or serious injury.

•

Complete installation, operation, and maintenance

information is provided in the instructions supplied with

each product.

Failure to comply with these instructions could result in

death or serious injury.

WARRANTY/REMEDY

Honeywell warrants goods of its manufacture as being free of

defective materials and faulty workmanship. Honeywell’s

standard product warranty applies unless agreed to otherwise

by Honeywell in writing; please refer to your order

acknowledgement or consult your local sales office for specific

warranty details. If warranted goods are returned to Honeywell

during the period of coverage, Honeywell will repair or replace,

at its option, without charge those items it finds defective. The

foregoing is buyer’s sole remedy and is in lieu of all other

warranties, expressed or implied, including those of

merchantability and fitness for a particular purpose. In no

event shall Honeywell be liable for consequential, special,

or indirect damages.

SALES AND SERVICE

Honeywell serves its customers through a worldwide network

of sales offices, representatives and distributors. For

application assistance, current specifications, pricing or name

of the nearest Authorized Distributor, contact your local sales

office or:

E-mail: info.sc@honeywell.com

Internet: www.honeywell.com/sensing

Phone and Fax:

Asia Pacific

+65 6355-±8±8

While we provide application assistance personally, through

our literature and the Honeywell web site, it is up to the

customer to determine the suitability of the product in the

application.

Specifications may change without notice. The information we

supply is believed to be accurate and reliable as of this

printing. However, we assume no responsibility for its use.

+65 6445-3033 Fax

+44 (0) 1698 481481

+44 (0) 1698 481676 Fax

+1-305-805-8188

+1-305-883-8±57 Fax

+1-800-537-6945

Europe

Latin America

USA/Canada

+1-815-±35-6847

+1-815-±35-6545 Fax

Automation and Control Solutions

Sensing and Control

Honeywell

11 West Spring Street

008137-±-EN IL50 GLO Printed in USA

October ±005

Freeport, Illinois 6103±

www.honeywell.com/sensing

180501DL4N [HONEYWELL]

相关型号：

180501GK0L

180501GK1M

180501GK2L

180501GK2N

180501GK4L

180501GK4M

180501GL0L

180501GL0M

180501GL0N

180501GL2M

180501GL2N

1805025