2015C [HONEYWELL]
Industrial VRS Magnetic Speed Sensors; 工业VRS磁敏速度传感器
| 型号： | 2015C |
| 厂家： | 
Honeywell |
| 描述： | Industrial VRS Magnetic Speed Sensors |
| 文件： | 总8页 (文件大小：410K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Low-Cost Molded
Industrial VRS Magnetic
Speed Sensors
DESCRIPTION
Low-Cost Molded VRS Sensors are designed for use in OEM
(Original Equipment Manufacturer) applications.
The output signal of a VRS sensor is an ac voltage that varies
in amplitude and wave frequency as the speed of the
monitored device changes, and is usually expressed in peak to
peak voltage (Vp-p).
Passive VRS (Variable Reluctance Speed) Magnetic Speed
sensors are simple, rugged devices that do not require an
external voltage source for operation.
One complete waveform (cycle) occurs as each target passes
the sensor’s pole piece. If a standard gear were used as a
target, this output signal would resemble a sine wave if viewed
on an oscilloscope.
A permanent magnet in the sensor establishes a fixed
magnetic field. The approach and passing of a ferrous metal
target near the sensor’s pole piece (sensing area) changes the
flux lines of the magnetic field, dynamically changing its
strength. This change in magnetic field strength induces a
current into a coil winding which is attached to the output
terminals.
Honeywell also offers VRS sensors for general purpose, high
output, power output, high resolution and high temperature, as
well as hazardous location applications.
FEATURES
POTENTIAL APPLICATIONS
•
•
•
•
•
•
•
Self-powered operation
Direct conversion of actuator speed to output frequency
Simple installation
•
Engine RPM (revolutions per minute) measurement on
aircraft, automobiles, boats, buses, trucks and rail
vehicles
Motor RPM measurement on drills, grinders, lathes and
automatic screw machines
Motor RPM measurement on precision camera, tape
recording and motion picture equipment
Process speed measurement on food, textile, paper,
woodworking, printing, tobacco and pharmaceutical
industry machinery
No moving parts
•
•
•
Designed for use over a wide range of speeds
Adaptable to a wide variety of configurations
Customized VRS products for unique speed sensing
applications
Housing diameters: 0.505 in, 7/16 in, 0.292 in, 1/4 in
Housing materials/styles: plastic smooth or threaded
Terminations: Crimp, pin, preleaded
Output voltages: 10 Vp-p to 190 Vp-p
•
•
•
•
•
•
Motor speed measurement of electrical generating
equipment
Speed measurement of pumps, blowers, mixers, exhaust
and ventilating fans
•
•
•
Flow measurement on turbine meters
Wheel-slip measurement on autos and locomotives
Gear speed measurement
Low-Cost Molded
0.505 INCH SENSORS (All dimensions for reference only. mm/[in])
Catalog Listing: 2040C (For 230 ºC [450 ºF] capability, order 2040CHT.)
General Specifications
Test Condition Specifications
Parameter
Characteristic
Parameter
Inductance
Gear pitch range 12 DP (module 2.11)
or coarser
Characteristic
85 mH max.
Parameter
Surface speed
Gear
Characteristic
25 m/s [1000 in/s]
8 DP (module 3.17)
Min. output voltage 115 Vp-p
Max. coil resistance 120 Ohm
to 162 Ohm
Pole piece
diameter
Weight
4,75 mm
[0.187 in]
28 g [1.0 oz]
Operating temp. -55 ºC to 120 ºC
Air gap
0,127 mm [0.005 in]
100 kOhm
range
[-67 ºF to 250 ºF]
Termination
Crimp terminals
Load resistance
Catalog Listing: 2030C
General Specifications
Test Condition Specifications
Parameter
Characteristic
Parameter
Inductance
Gear pitch range 24 DP (module 1.06)
or coarser
Characteristic
400 mH max.
Parameter
Surface speed
Gear
Characteristic
25 m/s [1000 in/s]
20 DP (module 1.27)
Min. output voltage 190 Vp-p
Max. coil resistance 910 Ohm to
1200 Ohm
Pole piece diameter 2.69 mm [0.106 in] Operating temp. -55 ºC to 120 ºC
Air gap
0,127 mm [0.005 in]
100 kOhm
range
[-67 ºF to 250 ºF]
Weight
28 g [1.0 oz]
Termination
Crimp terminals
Load resistance
2
www.honeywell.com/sensing
Industrial VRS Magnetic Speed Sensors
0.505 INCH SENSORS CONTINUED (All dimensions for reference only. mm/[in])
Catalog Listing: 2030P (For 230 ºC [450 ºF] capability, order 2030PHT.)
General Specifications
Test Condition Specifications
Parameter
Characteristic
Parameter
Inductance
Gear pitch range 24 DP (module 1.06)
or coarser
Characteristic
400 mH max.
Parameter
Surface speed
Gear
Characteristic
25 m/s [1000 in/s]
20 DP (module 1.27)
Min. output voltage 190 Vp-p
Max. coil resistance 910 Ohm to
1200 Ohm
Pole piece diameter 2.69 mm [0.106 in] Operating temp. -55 ºC to 120 ºC
Air gap
0,127 mm [0.005 in]
100 kOhm
range
[-67 ºF to 250 ºF]
Weight
28 g [1.0 oz]
Termination
Pin terminals
Load resistance
Catalog Listing: 2010C (For 230 ºC [450 ºF] capability, order 2010CHT.)
General Specifications
Test Condition Specifications
Parameter
Characteristic
Parameter
Inductance
Gear pitch range 24 DP (module 1.06)
or coarser
Characteristic
25 mH max.
Parameter
Surface speed
Gear
Characteristic
25 m/s [1000 in/s]
20 DP (module 1.27)
Min. output voltage 40 Vp-p
Max. coil resistance 45 Ohm
to 85 Ohm
Pole piece diameter 2.69 mm [0.106 in] Operating temp. -55 ºC to 120 ºC
Air gap
0,127 mm [0.005 in]
100 kOhm
range
[-67 ºF to 250 ºF]
Weight
28 g [1.0 oz]
Termination
Crimp terminals
Load resistance
Honeywell Sensing and Control
3
Low-Cost Molded
0.292 INCH SENSORS (All dimensions for reference only. mm/[in])
Catalog Listing: 2025C
General Specifications
Test Condition Specifications
Parameter
Min. output voltage 55 Vp-p
Max. coil resistance 390 Ohm
Characteristic
Parameter
Inductance
Gear pitch range 26 DP (module 0.98)
or coarser
Characteristic
75 mH max.
Parameter
Surface speed
Gear
Characteristic
25 m/s [1000 in/s]
20 DP (module 1.27)
Pole piece diameter 2.36 mm [0.093] in Operating temp. -40 ºC to 225 ºC
Air gap
0,127 mm [0.005 in]
100 kOhm
range
[-40 ºF to 107 ºF]
Weight
28 g [1.0 oz]
Termination
Crimp terminals
Load resistance
Catalog Listing: 2015C
General Specifications
Test Condition Specifications
Parameter
Min. output voltage 20 Vp-p
Max. coil resistance 80 Ohm
Characteristic
Parameter
Inductance
Gear pitch range 26 DP (module 0.98)
or coarser
Characteristic
15 mH max.
Parameter
Surface speed
Gear
Characteristic
25 m/s [1000 in/s]
20 DP (module 1.27)
Pole piece diameter 2.36 mm [0.093] in Operating temp. -40 ºC to 225 ºC
Air gap
0,127 mm [0.005 in]
100 kOhm
range
[-40 ºF to 107 ºF]
Weight
28 g [1.0 oz]
Termination
Crimp terminals
Load resistance
4
www.honeywell.com/sensing
Industrial VRS Magnetic Speed Sensors
7/16 INCH SENSORS
Catalog Listing: 3022
General Specifications
Test Condition Specifications
Parameter
Min. output voltage 17.5 Vp-p
Max. coil resistance 54 Ohm
Characteristic
Parameter
Inductance
Gear pitch range 26 DP (module 0.98)
or coarser
Characteristic
9 mH max.
Parameter
Surface speed
Gear
Characteristic
25 m/s [1000 in/s]
20 DP (module 1.27)
Pole piece diameter 2.36 mm
[0.093] in
Operating temp. -18 ºC to 93 ºC
Air gap
0,127 mm [0.005 in]
100 kOhm
range
[0 ºF to 200 ºF]
22 AWG PVC-
insulated leads
Weight
11 g [0.4 oz]
Termination
Load resistance
Mounting thread
7/16-20 UNF-2A
Catalog Listing: 302662
General Specifications
Test Condition Specifications
Parameter
Min. output voltage 10 Vp-p
Max. coil resistance 130 Ohm
Characteristic
Parameter
Inductance
Gear pitch range 32 DP (module 0.80)
or coarser
Characteristic
11 mH max.
Parameter
Surface speed
Gear
Characteristic
25 m/s [1000 in/s]
20 DP (module 1.27)
Pole piece diameter 1,83 mm [0.072 in] Operating temp. -40 ºC to 107 ºC
Air gap
0,127 mm [0.005 in]
100 kOhm
range
Termination
[-40 ºF to 225 ºF]
26 AWG PVC-
insulated leads
Weight
4.2 g [15 oz]
Load resistance
Honeywell Sensing and Control
5
Low-Cost Molded
1/4 INCH SENSOR
Catalog Listing: 302362
General Specifications
Test Condition Specifications
Parameter
Min. output voltage 10 Vp-p
Max. coil resistance 130 Ohm
Characteristic
Parameter
Inductance
Gear pitch range 32 DP (module 0.80)
or coarser
Characteristic
11 mH max.
Parameter
Surface speed
Gear
Characteristic
25 m/s [1000 in/s]
20 DP (module 1.27)
Pole piece diameter 1,83 mm [0.072 in] Operating temp. -18 ºC to 60 ºC
Air gap
0,127 mm [0.005 in]
100 kOhm
range
Termination
[0 ºF to 140 ºF]
26 AWG PVC-
insulated leads
Weight
4.2 g [15 oz]
Load resistance
Mounting thread
1/4 -28 UNF-1A
6
www.honeywell.com/sensing
Industrial VRS Magnetic Speed Sensors
THIS PAGE INTENTIONALLY LEFT BLANK.
Honeywell Sensing and Control
7
WARNING
PERSONAL INJURY
WARNING
MISUSE OF DOCUMENTATION
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
•
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
Failure to comply with these instructions could result in
death or serious injury.
•
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s
standard product warranty applies unless agreed to otherwise
by Honeywell in writing; please refer to your order
SALES AND SERVICE
Honeywell serves its customers through a worldwide network
of sales offices, representatives and distributors. For
application assistance, current specifications, pricing or name
of the nearest Authorized Distributor, contact your local sales
office or:
acknowledgement or consult your local sales office for specific
warranty details. If warranted goods are returned to Honeywell
during the period of coverage, Honeywell will repair or replace,
at its option, without charge those items it finds defective. The
foregoing is buyer’s sole remedy and is in lieu of all other
warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special,
or indirect damages.
E-mail: info.sc@honeywell.com
Internet: www.honeywell.com/sensing
Phone and Fax:
Asia Pacific +65 6355-2828
+65 6445-3033 Fax
While we provide application assistance personally, through
our literature and the Honeywell web site, it is up to the
customer to determine the suitability of the product in the
application.
Europe
+44 (0) 1698 481481
+44 (0) 1698 481676 Fax
Latin America +1-305-805-8188
+1-305-883-8257 Fax
USA/Canada +1-800-537-6945
+1-815-235-6847
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this
printing. However, we assume no responsibility for its use.
+1-815-235-6545 Fax
Automation and Control Solutions
Sensing and Control
Honeywell
1985 Douglas Drive North
005881-1-EN IL50 GLO Printed in USA
March 2007
Copyright © 2007 Honeywell International Inc. All rights reserved.
Minneapolis, MN 55422
www.honeywell.com/sensing
相关型号：
©2020 ICPDF网 联系我们和版权申明