83355 [HONEYWELL]
Hydraulic Brake Pressure Switch; 液压制动压力开关型号: | 83355 |
厂家: | Honeywell |
描述: | Hydraulic Brake Pressure Switch |
文件: | 总3页 (文件大小:121K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Series 1000
Hydraulic Brake Pressure Switch
DESCRIPTION
The Honeywell Series 1000 pressure switch is a small, low-
With its IP65 sealing and high burst rating, Honeywell’s Series
cost switch actuated by hydraulic fluid or gas. The switch is
highly responsive for low-set-point and high burst rating
requirements, and may also be used when converting the
brake system to hydraulic applications.
1000 switch often excels in harsh environments such as
extreme weather conditions or particle-filled areas. In addition
to its high resistance to shock and vibration, this pressure
switch is designed to maintain its tolerances across
temperature ranges in high system pressure environments.
POTENTIAL APPLICATIONS
FEATURES
•
•
•
•
•
Small vehicle brake light actuation
Compact agricultural tractors
Utility vehicles (UTVs)
•
•
•
•
•
Low set point: actuates at 20 psi
Reduced part count
High burst rating (for high cost-of-failure applications)
Banjo bolt fitting
Trucks and lift trucks
Small self-propelled vehicles
Sealed to IP65
BENEFITS
•
•
•
•
•
Low set point is highly responsive
Reduced field failures at part level
Enhanced reliability, lowers warranty costs
Minimized footprint
Designed for use in high shock and vibration along with
most extreme weather conditions
Series 1000
SPECIFICATIONS
Characteristic
Type
Parameter
Direct acting
Circuitry
Normally open
Connector size
Terminals
Set point
Operating pressure, max.
Proof pressure
Burst pressure
Operating temperature
Operating media
Electrical rating
Contacts
M10 x 1.25 banjo fitting
6,3 mm [0.25 in] blade
20 psi 10 psi [1,37 bar 0,69 bar]
1200 psi [82,74 bar]
2400 psi [165,47 bar]
4800 psi [330,95 bar]
-40 °C to 121 °C [-40 °F to 250 °F]
DOT 3 or 4 brake fluid
12 Vdc with two-1157 bulbs (4.4 A)
Silver plated copper
Diaphragm
EPDM
Housing
Base
Spring
Connector options
Rynite 545 glass filled
Trivalent plated steel
17-7 PH stainless steel
M10 x 1.25 double banjo; M10 x 1, 1/8-27 NPT
DIMENSIONS
2
www.honeywell.com/sensing
Hydraulic Brake Pressure Switch
ORDER GUIDE
Catalog Description
Listing
83355
83354
Series 1000 hydraulic brake pressure switch, normally open, 20 psi, M10 x 1.25 single banjo fitting, blade terminals
Series 1000 hydraulic brake pressure switch, normally open, 20 psi, M10 x 1.25 double banjo fitting, blade terminals
WARNING
WARNING
PERSONAL INJURY
MISUSE OF DOCUMENTATION
DO NOT USE these products as safety or emergency stop devices
or in any other application where failure of the product could result
in personal injury.
Failure to comply with these instructions could result in death
or serious injury.
•
The information presented in this product sheet is for reference
only. Do not use this document as a product installation guide.
Complete installation, operation, and maintenance information
is provided in the instructions supplied with each product.
•
Failure to comply with these instructions could result in death
or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of defective
materials and faulty workmanship. Honeywell’s standard product
warranty applies unless agreed to otherwise by Honeywell in writing;
please refer to your order acknowledgement or consult your local sales
office for specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair or
replace, at its option, without charge those items it finds defective. The
foregoing is buyer’s sole remedy and is in lieu of all other
warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no event
shall Honeywell be liable for consequential, special, or indirect
damages.
SALES AND SERVICE
Honeywell serves its customers through a worldwide network of sales
offices, representatives and distributors. For application assistance,
current specifications, pricing or name of the nearest Authorized
Distributor, contact your local sales office or:
E-mail: info.sc@honeywell.com
Internet: www.honeywell.com/sensing
Phone and Fax:
Asia Pacific
+65 6355-2828
+65 6445-3033 Fax
+44 (0) 1698 481481
+44 (0) 1698 481676 Fax
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Europe
Latin America +1-305-805-8188
+1-305-883-8257 Fax
USA/Canada +1-800-537-6945
+1-815-235-6847
Specifications may change without notice. The information we supply
is believed to be accurate and reliable as of this printing. However, we
assume no responsibility for its use.
+1-815-235-6545 Fax
Sensing and Control
Honeywell
1985 Douglas Drive North
009581-1-EN IL50 GLO Printed in USA
October 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Golden Valley, Minnesota 55422
www.honeywell.com/sensing
相关型号:
©2020 ICPDF网 联系我们和版权申明