AY250HSL10 [HONEYWELL]
LVDT DC Sensor, -76.2mm Min, 76.2mm Max,;
| 型号： | AY250HSL10 |
| 厂家： | 
Honeywell |
| 描述： | LVDT DC Sensor, -76.2mm Min, 76.2mm Max, 输出元件 传感器 换能器 |
| 文件： | 总2页 (文件大小：96K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Model DW7U DC-DC Submersible* LVDT
Order Code AY250
n Submersible
n Stainless Steel
n +/- 0.5 to +/- 4.0 in. Range
Dimensions
Available
Stroke
Ranges
4-Conductor,
Cable 16.5ft. long
Weight
Armature
X (in.) (oz.)
Typical
F.S.
Output
X Nominal
Electric
Zero Point
Range
Codes
L (in.)
2.44 in.
L
HP
HQ
HR
HS
HT
+/- 0.5 in.
+/- 1.0 in.
8.00
9.10
1.5
2.5
3.0
4.5
5.0
0.75
1.0
1.5
3.0
3.7
+/- 5 VDC
+/- 5 VDC
+/- 5 VDC
+/- 5 VDC
+/- 5 VDC
0.6 in.
+/- 2.0 in. 13.95
+/- 3.0 in. 18.52
+/- 4.0 in. 19.80
ø 0.187 in.
2-Nuts & 2-Washers
Supplied
ø 0.812 in.
Submersible Connector
Wiring Codes
Dual Power Supply
Single Power Supply
Brown
Blue
(+) Supply (+20 to +40 VDC)
Supply Return
Brown
Blue
(+) Supply (+10 to +20 VDC)
(-) Supply (-10 to -20 VDC)
Black
White
(-) Output
(+) Output +/-5 VDC
(min. Ohm across Black and White)
Black
White
(-) Output Common/ Supply Return
(+) Output +/-5 VDC
(min. 2k Ohm across Black and White)
Reverse polarity protected with voltage regulator.
Cable shield is not connected to transducer.
Reverse polarity protected with voltage regulator.
Cable shield is not connected to transducer.
Either black or blue must float. If both are grounded
or connected together, the unit will be destroyed.
Stroke Range................+/- 0.5 to 4.0 in.
Performance
Non-Linearity (max.)................+/- 0.25% Full Scale
Output Sensitivity................See table above
Noise................30 mV p-p
Temperature, Operating................-40° to 158°F
Temperature, Effect
Environmental
Zero (max.)................0.005% Full Scale/°F
Span (max.)................0.015% Full Scale/°F
Pressure Rating, Std.................150 psi, up to 3,000 psi with cable options
Element Type................DC-DC LVDT
Input Supply (acceptable)................+/- 10 to 20 VDC unregulated (45 mA max.)
or 20 to 40 VDC unregulated (45 mA max.)
Electrical
Electrical Termination................Submersible mating connector with 16.5’ cable
Material................Stainless Steel
Probe Material................Stainless Steel
Armature Type................Free Unguided
Probe Thread................M5 x 0.8”
Mechanical
Spring Force (max.)................Not Applicable
*Not recommended for salt water use. Consult Factory for saltwater submersible applications.
1-888-282-9891
www.honeywell.com/sensotec
364
Model DW7U
Typical System Diagram
Customer Supplied
Chart Recorder
Alarm Panel
Data Acquisition
Computer
PLC
Model DW7U
Mounting Options
Rod End Bearing
Mounting Blocks
AA937
AC Input Display Units
SC500
SC1000
SC2000
SC3004
Options
Range Codes
Fast Track Delivery
Built to Order
Range
Range Code
Stroke Ranges
+/- 0.5 to 4.0 in.
+/- 0.5 in.
+/- 1.0 in.
+/- 2.0 in.
+/- 3.0 in.
+/- 4.0 in.
HP
HQ
HR
HS
HT
OPT1. No connector or
cable, terminated with
soldier pins
Submersible mating connector
with 16.5’ cable
Electrical
Termination
OPT7. Radial outlet sub-
mersible connector with
16.5’ cable
Electrical Cable
Orientation
Improved
Linearity
L10. +/- 0.1% max. linearity
(less than or equal to +/- 4 in.)
Supplied as standard
Special Customer Requirements
(Consult Factory)
Mineral insulated welded stainless steel sheathed cable
0.12” diameter cable
1 to 164 ft. lengths available
-67° to 390° F
3,000 psi
Output options of 0-10 or 4-20 mA available
T.E.D.S. IEEE 1451.4 module
Signature Calibration
Approved
-Not RoHS Compliant
How to Order
The order code consists of the product model, the desired range code and the available options.
Sample Code: AY250
HQ
L10
Model Code
Range Code
Options Code
1-888-282-9891
www.honeywell.com/sensotec
365
相关型号：
©2020 ICPDF网 联系我们和版权申明