CPC60G [HONEYWELL]
Peizoresistive Sensor, Gage, 60Psi Max, 0-90mV, Square, Through Hole Mount;
| 型号： | CPC60G |
| 厂家： | 
Honeywell |
| 描述： | Peizoresistive Sensor, Gage, 60Psi Max, 0-90mV, Square, Through Hole Mount 传感器 换能器 |
| 文件： | 总4页 (文件大小：478K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Silicon Pressure Sensors
Uncompensated/Compensated
and Compensated Calibrated
CPC, CPCL,
CPX, CPXL Series
FEATURES
• Low Cost, Small Size
• Temperature Compensated
• Zero and Span Calibrated
• Millivolt Output
• Differential, Gage and
Absolute Pressure
• Constant Voltage
Excitation
• High Impedance - Low
Current
TYPICAL APPLICATIONS
• Medical Applications
• Applications Requiring
Small Size
• Applications Requiring
Vacuum and Positive
• Pressure Reference, or
GENERAL DESCRIPTION
Both
The CPX/CPXL and the CPC/CPCL Series sensors integrate silicon
micromachined sensing technology, temperature compensation, and
calibration in a complete family of low cost packages. This series offers the
most cost-effective solution for design requirements.
These piezoresistive pressure sensors use micromachined silicon chips
mounted on a ceramic and protected with a plastic cap. Several tube
arrangements with nylon housings are available for various pressure
applications.
On devices of 5 psi and above, the top side of the chip is protected against
humidity by a Silgel coating. While the sensors are designed for use with
non-corrosive, nonionic pressure media, they accommodate many gases
that are used in medical applications.
The CPC Series is designed for the lowest cost and smallest profile. The
standard packages have only a plastic cap for OEM applications. The CPC
axial port option accommodates pressure measurements in tube
applications.
WARNING
PERSONAL INJURY
DO NOT USE these
products as safety or
emergency stop devices or
in any other application
where failure of the product
could result in personal
injury.
Failure to comply with
these instructions could
result in death or serious
injury.
WARNING
MISUSE OF DOCUMENTATION
• The information presented in this product sheet is for reference only.
Do not use this document as a product installation guide.
• Complete installation, operation, and maintenance information is
provided in the instructions supplied with each product.
Failure to comply with these instructions could result in death or
serious injury.
Sensing and Control
Silicon Pressure Sensors
CPC, CPCL
CPX, CPXL Series
Uncompensated/Compensated
and Compensated Calibrated
ELECTRICAL SPECIFICATIONS
CPC and CPCL @ 12 Vdc,
CPX and CPXL CPCL @ 5 Vdc,
25 °C [77 °F]
25 °C [77 °F]
Min.
3.0
Typ.
12.0
0
Max.
16.0
1.0
Min.
3.0
Typ.
5.0
0
Max.
12.0
50
Units
Vdc
Excitation Voltage
Null
-1.0
-50
mV
Offset Temperature Shift
0 °C to 70 °C [32 °F to 158 °F]**
Full Scale Temperature Shift 0
°C to 70 °C [32 °F to 158 °F]2
Linearity, Hysteresis Error3
Input Resistance
--
--
--
--
±1.0
±2
--
--
±0.5
mV
-2050
PPM/°C
0.25
--
% Span
--
0.25
--
1.0
1.0
% Span
kΩ
kΩ
°C [°F]
5.0
--
--
5.0
--
--
--
--
Output Resistance
--
-25 [-13]
-40 [-40]
--
3.0
--
3.0
--
Operating Temperature
Storage Temperature
Common Mode Pressure
Weight
85 [185]
-25 [-13]
85 [185]
--
125 [257] -40 [-40]
--
125 [257] °C [°F]
--
50
--
--
--
--
50
psi
--
2
2
--
gram
Note 1: Pressure specs obtained with pressure applied to the front of the sensor.
Note 2: Shift is relative to 25 °C [77 °F]
Note 3: Measured at ½ full scale rated pressure using BFSL
ABSOLUTE OUTPUT
CPC @ 12 Vdc,
25 °C [77 °F]
Output Full Scale Span, (mV)
CPX @ 12 Vdc,
25 °C [77 °F]
Output Full Scale Span, (mV)
Overpressure
(Psi)
FS Pressure
Min.
57
Typ.
60
Max.
63
Min.
112
168
168
189
210
--
Typ.
168.5
253
253
263.5
295
--
Max.
225
338
338
338
380
--
Max.
5 psi
15 psi
15 psi
30 psi
60 psi
100 psi
150 psi
85
90
95
45 psi
85
90
95
90 psi
85
90
95
180 psi
250 psi
250 psi
95
100
90
105
95
85
GAGE AND DIFFERENTIAL1 OUTPUT
CPC and CPCL @ 12 Vdc,
25 °C [77 °F]
CPX and CPXL @ 12 Vdc,
25 °C [77 °F]
Overpressure
FS Pressure
Output Full Scale Span, (mV)
Output Full Scale Span, (mV)
(Psi)
Max.
3
Min.
23
19
17
57
85
85
85
95
85
Typ.
25
Max.
27
Min.
50
Typ.
68
Max.
86
4 in H2O
10 in H2O
1 psi
20
21
45
78.5
75
112
110
225
338
338
338
380
338
3
18
19
40
3
5 psi
60
63
112
168
168
189
210
187
168.5
253
15
15 psi
90
95
45
30 psi
90
95
253
90
60 psi
90
95
263.5
295
180
250
250
100 psi
150 psi
100
90
105
95
262.5
Note 1: Differential common mode pressure should not exceed 50 psi
2 Honeywell • Sensing and Control
Silicon Pressure Sensors
CPC, CPCL
CPX, CPXL Series
Uncompensated/Compensated
and Compensated Calibrated
PHYSICAL DIMENSIONS for reference only mm [In]
Non-ported Package
AF and GF Package
DF Package
MEDIA COMPATIBILITY:
Clean, dry gases only
EQUIVALENT CIRCUIT
Pinout
P1 Port:
Media must be compatible with epoxy based
1. - V Excitation
2. + Output Signal
3. +V Excitation
4. - Output Signal
adhesive.
P2 Port:
Media must be compatible with nylon housing,
epoxy adhesive and silicon.
Honeywell • Sensing and Control 3
Silicon Pressure Sensors
CPC, CPCL
CPX, CPXL Series
Uncompensated/Compensated
and Compensated Calibrated
CPC/CPCL/CPX/CPXL SERIES ORDER GUIDE
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as
being free of defective materials and faulty
workmanship. Contact your local sales office for
warranty information. If warranted goods are
returned to Honeywell during the period of coverage,
Honeywell will repair or replace without charge those
items it finds defective. The foregoing is Buyer’s
sole remedy and is in lieu of all other warranties,
expressed or implied, including those of
merchantability and fitness for a particular
purpose.
While we provide application assistance personally,
through our literature and the Honeywell web site, it
is up to the customer to determine the suitability of
the product in the application.
For application assistance, current specifications, or
name of the nearest Authorized Distributor, contact a
nearby sales office. Or call:
1-800-537-6945 USA/Canada
1-815-235-6847 International
FAX
1-815-235-6545 USA
Specifications may change without notice. The
information we supply is believed to be accurate and
reliable as of this printing. However, we assume no
responsibility for its use.
INTERNET
www.honeywell.com/sensing
info.sc@honeywell.com
Sensing and Control
www.honeywell.com/sensing
Honeywell
11 West Spring Street
Freeport, Illinois 61032
008054-2-EN IL50 GLO 1004 Printed in USA
Copyright 2004 Honeywell International Inc. All Rights Reserved.
相关型号：
CPC60GFC
Peizoresistive Sensor, Gage, 0Psi Min, 60Psi Max, 0-90mV, Square, Through Hole Mount
HONEYWELL
CPC60GFH
Peizoresistive Sensor, Gage, 0Psi Min, 60Psi Max, 0-90mV, Square, Through Hole Mount
HONEYWELL
CPC60GH
Peizoresistive Sensor, Vacuum Gage, -60Psi Min, 60Psi Max, Rectangular, Through Hole Mount
HONEYWELL
©2020 ICPDF网 联系我们和版权申明