CPX05G [HONEYWELL]
Peizoresistive Sensor, Gage, 0-168.5mV, Square, Through Hole Mount;型号: | CPX05G |
厂家: | Honeywell |
描述: | Peizoresistive Sensor, Gage, 0-168.5mV, Square, Through Hole Mount |
文件: | 总4页 (文件大小:120K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CPC/CPCL and
CPX/CPXL Series
Uncompensated/Compensated
and Compensated Calibrated
Silicon Pressure Sensors
DESCRIPTION
On devices of 5 psi and above, the top side of the chip is
The CPX/CPXL and the CPC/CPCL Series sensors integrate
silicon micromachined sensing technology, temperature
compensation, and calibration in a complete family of low cost
packages. This series offers the most cost-effective solution for
design requirements.
protected against humidity by a Silgel coating. While the
sensors are designed for use with non-corrosive, nonionic
pressure media, they accommodate many gases that are used
in medical applications.
The CPC Series is designed for the lowest cost and smallest
profile. The standard packages have only a plastic cap for
OEM applications. The CPC axial port option accommodates
pressure measurements in tube applications.
These piezoresistive pressure sensors use micromachined
silicon chips mounted on a ceramic and protected with a plastic
cap. Several tube arrangements with nylon housings are
available for various pressure applications.
FEATURES
POTENTIAL APPLICATIONS
•
•
•
•
•
•
•
Low cost, small size
•
•
•
•
Medical applications
Temperature compensated
Zero and span calibrated
Millivolt output
Applications requiring small size
Applications requiring vacuum and positive
Pressure reference, or both
Differential, gage and absolute pressure
Constant voltage excitation
High impedance - low current
CPC/CPCL and CPX/CPXL Series
ELECTRICAL SPECIFICATIONS
Characteristic
CPC/CPCL at 12 Vdc, 25 °C [77 °F]
CPX/CPXL at 5 Vdc, 25 °C [77 °F]
Min.
Typ.
Max.
Unit
Unit
Min.
3.0
Typ.
5.0
0
Max.
12.0
50
Excitation voltage
3.0
12.0
0
16.0
1.0
Vdc
mV
Vdc
mV
Null
-1.0
-50
Offset temperature shift(1)
0 °C to 25 °C [32 °F to 77°F]
25 °C to 70 °C [77 °F to 158 °F](2)
Full scale temperature shift2
0 °C to 25 °C [32 °F to 158 °F]
25 °C to 70 °C [77 °F to 158 °F](2)
Linearity, hysteresis error(3)
Input resistance
–
–
–
–
±1.0
±2
mV
–
–
±0.5
mV
PPM/°C
-2200
–
PPM/°C
–
0.25
–
1.0
% span
kOhm
kOhm
°C [°F]
°C [°F]
psi
0.25
–
1.0
% span
kOhm
kOhm
°C [°F]
°C [°F]
psi
5.0
–
5.0
–
Output resistance
–
3.0
–
–
85 [185]
125 [257]
50
–
3.0
–
–
85 [185]
125 [257]
50
Operating temperature
Storage temperature
Common mode pressure
Weight
-25 [-13]
-25 [-13]
-40 [-40]
–
-40 [-40]
–
–
–
–
–
–
–
2
–
g
2
–
g
Notes:
1. Pressure specs obtained with pressure applied to the front of the sensor.
2. Shift is relative to 25 °C [77 °F].
3. Measured at ½ full scale rated pressure using BFSL.
ABSOLUTE OUTPUT
FS Pressure
CPC at 12 Vdc, 25 °C [77 °F]
Output Full Scale Span (mV)
CPX at 5 Vdc, 25 °C [77 °F]
Output Full Scale Span (mV)
Overpressure
(psi)
Max.
15
Min.
Typ.
60
Max.
Min.
Typ.
168.5
253
Max.
5 psi
57
85
85
85
95
63
95
112
168
168
189
210
225
338
338
338
380
15 psi
30 psi
60 psi
100 psi
90
45
90
95
253
90
90
95
263.5
295
180
250
100
105
GAGE/DIFFERENTIAL(1) OUTPUT
FS Pressure
CPC/CPCL at 12 Vdc, 25 °C [77 °F]
Output Full Scale Span (mV)
CPX/CPXL at 5 Vdc, 25 °C [77 °F]
Output Full Scale Span (mV)
Overpressure
(psi)
Max.
3
Min.
23
19
17
57
85
85
85
95
85
Typ.
25
Max.
27
Min.
50
Typ.
68
Max.
86
4 in H2O
10 in H2O
1 psi
20
21
40
78.5
75
112
110
225
338
338
338
380
338
3
18
19
40
3
5 psi
60
63
112
168
168
189
210
187
168.5
253
15
15 psi
90
95
45
30 psi
90
95
253
90
60 psi
90
95
263.5
295
180
250
250
100 psi
150 psi
Note:
100
90
105
95
262.5
1. Differential common mode pressure should not exceed 50 psi.
2
www.honeywell.com/sensing
Uncompensated/Compensated and Compensated Calibrated
Silicon Pressure Sensors
MOUNTING DIMENSIONS (For reference only: mm [in].)
Non-ported Package
AF and GF Package
DF Package
EQUIVALENT CIRCUIT
MEDIA COMPATIBILITY: Clean, dry gases only
Port 1: Media must be compatible with epoxy-based adhesive.
Port 2: Media must be compatible with nylon housing, epoxy adhesive
and silicon.
Pinout
1. - V Excitation
2. + Output Signal
3. +V Excitation
4. - Output Signal
Honeywell Sensing and Control
3
ORDER GUIDE
WARNING
WARNING
PERSONAL INJURY
MISUSE OF DOCUMENTATION
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
•
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
Failure to comply with these instructions could result in
death or serious injury.
•
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s
standard product warranty applies unless agreed to otherwise
by Honeywell in writing; please refer to your order
acknowledgement or consult your local sales office for specific
warranty details. If warranted goods are returned to Honeywell
during the period of coverage, Honeywell will repair or replace,
at its option, without charge those items it finds defective. The
foregoing is buyer’s sole remedy and is in lieu of all other
warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special,
or indirect damages.
SALES AND SERVICE
Honeywell serves its customers through a worldwide network
of sales offices, representatives and distributors. For
application assistance, current specifications, pricing or name
of the nearest Authorized Distributor, contact your local sales
office or:
E-mail: info.sc@honeywell.com
Internet: www.honeywell.com/sensing
Phone and Fax:
Asia Pacific +65 6355-2828
While we provide application assistance personally, through
our literature and the Honeywell web site, it is up to the
customer to determine the suitability of the product in the
application.
+65 6445-3033 Fax
Europe
+44 (0) 1698 481481
+44 (0) 1698 481676 Fax
Latin America +1-305-805-8188
+1-305-883-8257 Fax
USA/Canada +1-800-537-6945
+1-815-235-6847
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this
printing. However, we assume no responsibility for its use.
+1-815-235-6545 Fax
Sensing and Control
Honeywell
1985 Douglas Drive North
008054-3-EN IL50 GLO Printed in USA
July 2007
© 2007 Honeywell International Inc. All rights reserved.
Minneapolis, MN 55422
www.honeywell.com/sensing
©2020 ICPDF网 联系我们和版权申明