FF3-20-DC-03 [HONEYWELL]
Snap Acting/Limit Switch, DPST, Momentary, 1A, 30VDC, Wire Terminal, Panel Mount-threaded;
| 型号： | FF3-20-DC-03 |
| 厂家： | 
Honeywell |
| 描述： | Snap Acting/Limit Switch, DPST, Momentary, 1A, 30VDC, Wire Terminal, Panel Mount-threaded 开关 |
| 文件： | 总4页 (文件大小：691K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MICRO SWITCH Magnetically Actuated Non-Contact
Safety Switches, FF2 and FF3 Series
004748
Issue 3
Datasheet
FEATURES
• Tough ABS threaded plastic housing in a Ø18 mm or
Ø 30 mm for switch and actuator
• Option of one or two safety contacts (normally closed when
target is present)
• Optional auxiliary monitoring contact (normally closed when
target is not sensed)
• CE and UL508 Certifications
POTENTIAL APPLICATIONS
• Equipment and machinery guards
• Can forming and filling (aluminum, steel, and plastic)
• Pick-and-place packaging equipment
• Pick-and-place assembly equipment
• Plastic molding equipment
• Printing machinery
• Semiconductor equipment
• Textile machinery
• Woodworking machinery
DESCRIPTION
The FF2 Series and FF3 Series are magnetically actuated
non-contact safety switches incorporated into a threaded
plastic housing for use in machine guarding applications.
These Series of switches provide a preferred solution where
misalignment between guards, gates, or doors can occur
and locking of the guard, gate, or door is not required. The
FF2 Series is designed with an 18 mm threaded diameter
plastic housing while the FF3 Series has a 30 mm threaded
diameter plastic housing. The threaded magnetic actuator of
respective size (18 mm or 30 mm) and hex mounting hardware
are included with each switch. The FF2 and FF3 Series are
certified to CE and UL. The switches and actuators are sealed
to IP67 for wet or dusty environments.
DIFFERENTIATION
• Non-contact sensing, requires no mechanical linkage to
actuate switch
• Threaded housing for switch and actuator for ease of
installation
• Choice of one or two safety contacts to close when actuated
• Optional auxiliary contact closes when actuator moves out
of the operating range
VALUE TO CUSTOMERS
• Non-contact sensing minimizes installation and set-up time
• Ø18 mm or Ø30 mm mounting for switch and actuator
simplifies installation
• Cable with color coded individual wire leads integral to
switch reduces installation
PORTFOLIO
Honeywell offers a wide range of FF Series magnetically
actuated non-contact switches as well as other non-
interlocking safety switches which include the GSS Series
electromechanical limit switches, and the cable/rope pull
switches (1CPS Series single head and 2CPS Series dual
head). Honeywell safety interlocking switches include the
metal housing EN50041 GK Series, metal housing solenoid
GKL/R Series, miniature plastic housing GKM Series, EN50047
plastic housing GKE Series, and plastic housing GKN Series.
• Target can approach switch from head-on, slide by, or
rotational/hinge for flexible installation
Sensing and Internet of Things
Magntically Actuated Non-Contact Safety Switches, FF2 and FF3 Series
Table 1. Performance Specifications
Parameter
Characteristic
FF2-10-AC (Ø18)
FF2-11-AC (Ø18)
FF2-10-DC (Ø18)
FF2-11-DC (Ø18)
FF3-20-AC (Ø30)
FF3-21-AC (Ø30)
FF3-20-DC (Ø30)
FF3-21-DC (Ø30)
Contact
arrangement
1NC (FF2ꢀ10ꢀAC)
1NC/1NO (FF2ꢀ11ꢀAC)
1NC (FF2ꢀ10ꢀDC)
1NC/1NO (FF2ꢀ11ꢀDC)
2NC (FF3ꢀ20ꢀAC)
2NC/1NO (FF3ꢀ21ꢀAC)
2NC (FF3ꢀ20ꢀAC)
2NC/1NO (FF3ꢀ21ꢀAC)
Contact rating
(safety contact)
2 A @ 230 Vac
1 A ind./res. @ 30 Vdc
2 A @ 230 Vac
1 A ind./res. @ 30 Vdc
Sensing distance*
(safety contact)
10 mm [0.4 in] ON
30 mm [1.18 in] OFF
10 mm [0.4 in] ON
30 mm [1.18 in] OFF
10 mm [0.4 in] ON
35 mm [1.38 in] OFF
10 mm [0.4 in] ON
35 mm [1.38 in] OFF
Close/dropꢀout/
bounce
3 ms/2.1 ms/0.7 ms
3 ms/2.1 ms/0.7 ms
3 ms/2.1 ms/0.7 ms
3 ms/2.1 ms/0.7 ms
(safety contact)
Contact rating
(aux. contact)
15 W/10 VA
15 W/10 VA
15 W/10 VA
15 W/10 VA
Sensing distance*
(aux. contact)
7 mm [0.28 in] OFF
14 mm [0.55 in] ON
7 mm [0.28 in] OFF
14 mm [0.55 in] ON
7 mm [0.28 in] OFF
20 mm [0.79 in] ON
7 mm [0.28 in] OFF
20 mm [0.79 in] ON
Close/dropꢀout/
bounce
(aux. contact)
0.5 ms/0.3 ms/0.7 ms
ac: 2 A fast acting
0.5 ms/0.3 ms/0.7 ms
dc: 1 A fast acting
0.5 ms/0.3 ms/0.7 ms
ac: 2 A fast acting
0.5 ms/0.3 ms/0.7 ms
dc: 1 A fast acting
Internal fuse**
External fuse **
(customer
ac: 1.6 A fast acting
dc: 0.8 A fast acting
ac: 1.6 A fast acting
dc: 0.8 A fast acting
supplied)
Environmental seal
rating
IP67
IP67
IP67
IP67
Vibration/shock
50 Hz to 100 Hz/10g
50 Hz to 100 Hz/10g
50 Hz to 100 Hz/10g
50 Hz to 100 Hz/10g
Operating
temperature
ꢀ10°C to 55°C
[14°F to 131°F]
ꢀ10°C to 55°C
[14°F to 131°F]
ꢀ10°C to 55°C
[14°F to 131°F]
ꢀ10°C to 55°C
[14°F to 131°F]
Housing material
ABS resin filled
ABS resin filled
ABS resin filled
ABS resin filled
Actuator & switch concen-
tric when safety contact
actuated
Actuator & switch concen-
tric when safety contact
actuated
Actuator & switch concen-
tric when safety contact
actuated
Actuator & switch concen-
tric when safety contact
actuated
Mounting &
alignment
Agency
certifications
CE and UL
CE and UL
CE and UL
CE and UL
*Sensing distance is from surface of switch to surface of magnetic actuator.
**All safety contacts should be fused externally as the internal fuse is not resettable.
Table 2. Connections
FF2-10
FF3-20
FF3-21
FF2-11
2
sensing.honeywell.com
Magntically Actuated Non-Contact Safety Switches, FF2 and FF3 Series
Table 3. Contacts
FF2
FF3
NOTE: Contact configurations shown under closed condition for guard device. Actuator has energized switch contacts, as show.
Table 4. Order Guide
Catalog Listing
FF2-10-AC-03
FF2-11-AC-03
FF2-10-DC-03
FF2-11-DC-03
FF3-20-AC-03
FF3-21-AC-03
FF3-20-DC-03
FF3-21-DC-03
Description
Safety switch, Ø18 mm [0.71 in] 1NC, ac, 3 m pre-wired
Safety switch, Ø18 mm [0.71 in] 1NC/1NO, ac, 3 m pre-wired
Safety switch, Ø18 mm [0.71 in] 1NC, dc, 3 m pre-wired
Safety switch, Ø18 mm [0.71 in] 1NC/1NO, dc, 3 m pre-wired
Safety switch, Ø30 mm [1.18 in] 2NC, ac, 3 m pre-wired
Safety switch, Ø30 mm [1.18 in] 2NC/1NO, ac, 3 m pre-wired
Safety switch, Ø30 mm [1.18 in] 2NC, dc, 3 m pre-wired
Safety switch, Ø30 mm [1.18 in] 2NC/1NO, dc, 3 m pre-wired
Figure 1. Product Dimensions
Sensing and Internet of Things
3
m WARNING
ADDITIONAL MATERIALS
IMPROPER INSTALLATION
The following associated literature is available on the Honeywell
web site at sensing.honeywell.com:
•
Consult with local safety agencies and their requirements
when designing a machine-control link, interface and all
control elements that affect safety.
• Product installation instructions
• Product range guide
•
Strictly adhere to all installation instructions.
Failure to comply with these instructions could result in
death or serious injury.
m WARNING
MISUSE OF DOCUMENTATION
•
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
•
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Warranty/Remedy
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship during the appli-
cable warranty period. Honeywell’s standard product warranty
applies unless agreed to otherwise by Honeywell in writing;
please refer to your order acknowledgment or consult your
local sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of coverage,
Honeywell will repair or replace, at its option, without charge
those items that Honeywell, in its sole discretion, finds defec-
tive. The foregoing is buyer’s sole remedy and is in lieu of all
other warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special,
or indirect damages.
Find out more
Honeywell serves its customers
through a worldwide network
of sales offices, representatives
and distributors. For applica-
tion assistance, current specifi-
cations, pricing or name of the
nearest Authorized Distributor,
contact your local sales office.
To learn more about Honey-
well’s sensing and control
products,
While Honeywell may provide application assistance personally,
through our literature and the Honeywell web site, it is buyer’s
sole responsibility to determine the suitability of the product in
the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this writing.
However, Honeywell assumes no responsibility for its use.
call +1-815-235-6847 or
1-800-537-6945,
visit sensing.honeywell.com,
or e-mail inquiries to
info.sc@honeywell.com
Honeywell Sensing and Internet of Things
9680 Old Bailes Road
004748ꢀ3ꢀENꢁIL50 GLOꢂ
January 2017
Fort Mill, SC 29707
© 2017 Honeywell International Inc. All rights reserved.
honeywell.com
相关型号：
FF3-21-AC-03
Snap Acting/Limit Switch, 3PST, Momentary, Wire Terminal, Panel Mount-threaded
HONEYWELL
FF3-21-DC-03
Snap Acting/Limit Switch, 3PST, Momentary, 1A, 30VDC, Wire Terminal, Panel Mount-threaded
HONEYWELL
FF3-22-R15
Card Edge Connector, 22 Contact(s), 1 Row(s), Female, Right Angle, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK
FF3-22-S15
Card Edge Connector, 22 Contact(s), 1 Row(s), Female, Straight, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK
FF3-23-R15
Card Edge Connector, 23 Contact(s), 1 Row(s), Female, Right Angle, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK
FF3-23-S15
Card Edge Connector, 23 Contact(s), 1 Row(s), Female, Straight, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK
FF3-24-R15
Card Edge Connector, 24 Contact(s), 1 Row(s), Female, Right Angle, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK
FF3-24-S15
Card Edge Connector, 24 Contact(s), 1 Row(s), Female, Straight, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK
FF3-25-R15
Card Edge Connector, 25 Contact(s), 1 Row(s), Female, Right Angle, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK
FF3-25-S15
Card Edge Connector, 25 Contact(s), 1 Row(s), Female, Straight, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK
FF3-26-R15
Card Edge Connector, 26 Contact(s), 1 Row(s), Female, Right Angle, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK
FF3-27-R15
Card Edge Connector, 27 Contact(s), 1 Row(s), Female, Right Angle, 0.049 inch Pitch, Solder Terminal, Fcc Retnn Dvc, Black Insulator
DDK
©2020 ICPDF网 联系我们和版权申明