HRF-AT4511-E [HONEYWELL]

15.5 dB, DC-4GHz, 5 Bit Serial Digital Attenuator; 15.5分贝, DC - 4GHz的, 5位串行数字衰减器
HRF-AT4511-E
型号: HRF-AT4511-E
厂家: Honeywell    Honeywell
描述:

15.5 dB, DC-4GHz, 5 Bit Serial Digital Attenuator
15.5分贝, DC - 4GHz的, 5位串行数字衰减器

衰减器
文件: 总8页 (文件大小:547K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
HRF-AT4511  
15.5 dB, DC-4GHz, 5 Bit  
Serial Digital Attenuator  
Features  
Very Low DC Power Consumption  
Attenuation In Steps From 0.5 dB To 15.5 dB  
Single Or Dual Power Supply Voltages  
Serial Data Interface  
50 Ohm Compatible Impedance  
Space Saving LPCCTM Surface Mount Packaging  
Product Description  
The Honeywell HRF-AT4511 is  
a
5-bit digital  
attenuator that is ideal for use in broadband  
communication system applications that require  
accuracy, speed and low power consumption. The  
HRF-AT4511 is manufactured with Honeywell's  
patented Silicon On Insulator (SOI) CMOS  
HRF-AT4511 in LPCC™ Package  
manufacturing  
technology, which provides the  
performance of GaAs with the economy and  
integration capabilities of conventional CMOS.  
RF Electrical Specifications @ + 25oC  
Parameter  
Test Condition  
Frequency  
Minimum  
Typical  
Maximum  
Units  
dB  
dB  
dB  
dB  
dBm  
dBm  
dBm  
dBm  
Insertion Loss  
DC – 0.5 GHz  
2.0 GHz  
3.0 GHz  
4.0 GHz  
1.0 GHz  
2.0 GHz  
1.0 GHz  
2.0 GHz  
1.60  
2.00  
2.20  
3.60  
23.0  
21.5  
29.0  
28.0  
1.80  
2.10  
2.40  
3.80  
1dB Compression  
1dB Compression  
Input IP3  
VSS = 0V, Input Power  
VSS = - 3, Input Power  
VSS = 0V Two-tone inputs  
Up To +5 dBm @ 0 dBm  
Attenuation  
2.0 GHz  
35.5  
dBm  
Input IP3  
Vss = - 3  
Two-tone inputs Up To + 5  
dBm @ 0 dBm Attenuation  
Any Bit or Combination of  
Bits  
2.0 GHz  
37.0  
-15  
dBm  
dB  
Return Loss*  
DC - 4.0 GHz  
-11  
Attenuation Accuracy  
All attenuation states  
All attenuation states  
All attenuation states  
All attenuation states  
10% To 90%  
50% Cntl To 90%/10%RF  
In-Band  
T high / T low = ½ minimum clock period  
Set up to rising edge of clock  
1.0 GHz  
2.0 GHz  
3.0 GHz  
4.0 GHz  
+/-(0.17 + 3% of programmed IL)  
+/-(0.22 + 3% of programmed IL)  
+/-(0.33 + 3% of programmed IL)  
+/-(0.45 + 3% of programmed IL)  
dB  
dB  
dB  
dB  
nS  
nS  
mV  
nS  
nS  
nS  
nS  
Trise, Tfall*  
Ton, Toff (Tpd)  
Transients  
T clock Period (Tprd)*  
T data set up (Tsup)*  
T data hold (Thld)*  
T latch set up (Tlsup)*  
10  
15  
30  
50  
5
2
Data hold after rising edge of clock  
Data set up to falling edge of OE  
5
0.01uF Decoupling Capacitors Required On Power Supply Rails.  
*By design  
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
mysoiservices@honeywell.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
2002 4511W  
Published June 2002 Page 1  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  
HRF-AT4511  
Functional Schematic  
DC Electrical Specifications @ + 25oC  
Parameter  
Minimum  
Typical  
Maximum  
Units  
VDD  
VSS  
3.3*  
5.0  
V
-5.0  
2
V
mA  
V
IDD Power Supply Current  
CMOS Logic level (0)  
CMOS Logic level (1)  
Input Leakage Current  
0
0.8  
VDD  
10  
VDD – 0.8  
V
uA  
* Note, performance curves are for VDD= +5.0 +/- 10%  
Absolute Maximum Ratings2  
Parameter  
Absolute Maximum  
Units  
Input Power  
+ 35  
dBm  
VDD  
+6.0  
-5.5  
V
VSS  
V
ESD Voltage  
Operating Temperature  
Storage Temperature  
Digital Inputs  
400  
V
-40 To +85  
-65 To +125  
Degrees C  
Degrees C  
V
VDD+0.6 max to VSS -0.6 min  
(Note2) Operation of this Device beyond any of these parameters may cause permanent damage.  
Latch-Up: Unlike conventional CMOS digital attenuators, Honeywell's HRF-AT4511 is immune to latch-up.  
ESD Protection: Although the HRF-AT4511 contains ESD protection circuitry on all digital inputs, conventional precautions should  
be taken to ensure that the Absolute Maximum Ratings are not exceeded.  
.
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
mysoiservices@honeywell.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
2002 4511W  
Published June 2002 Page 2  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  
HRF-AT4511  
Package Outline Drawing  
This package conforms to the LPCCTM 4 X 4 mm 16 lead body dimensions.  
See ASAT LPCC Marketing Outline Dwg. # DGMJ00004 Latest Rev. at  
http://www.asat.com for additional dimensional information.  
4.0 mm  
4.0 mm  
Pin Configuration  
Pin  
1
Function  
Pin  
9
Function  
GROUND  
RF OUTPUT  
GROUND  
VSS  
VDD  
2
3
4
5
6
7
8
GROUND  
RF INPUT  
GROUND  
GROUND  
GROUND  
GROUND  
GROUND  
10  
11  
12  
13  
14  
15  
16  
DIGITAL GROUND  
OE  
CLK  
DATA  
Serial Data Load  
Serial data is shifted into the register on the rising edge of clock, MSB first. The state of “OE” will not affect the shifting  
of data. The rising edge of the “OE” signal will be the clock for the transfer of shifted data. Latched new data occurs  
one prop delay after the rising edge of “OE”. See the Electrical Spec Table for AC parameters.  
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
mysoiservices@honeywell.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
2002 4511W  
Published June 2002 Page 3  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  
HRF-AT4511  
Truth Table  
S4  
0
S3  
0
0
S2  
0
0
S1  
0
0
S0  
0
1
Output  
Reference Input  
0.5 dB  
0
0
0
0
1
0
1 dB  
0
0
1
0
0
2 dB  
0
1
0
0
0
4 dB  
1
0
0
0
0
8 dB  
1
1
1
1
1
15.5 dB  
Operation: Data on serial input D is clocked into internal registers on the low to high transition of the Clock signal (CK). The  
register is sampled during the Output Enable (OE) low state and clocked into the register during the low-to-high  
transition  
Evaluation Circuit Board  
Honeywell's evaluation board provides an  
easy to use method of evaluating the RF  
performance of our attenuator. Simply  
connect power, DC and RF signals to be  
measuring attenuator performance in less  
than 10 minutes.  
HRF-AT4511 Evaluation Board  
Evaluation Circuit Board Layout Design Details  
Item  
Description  
PCB  
Impedance Matched Multi-Layer FR4  
Attenuator  
HRF-AT4511 Digital Attenuator  
Chip Capacitor  
RF Connector  
DC Pin  
Panasonic Model ECU-E1C103KBQ Capacitor, .01uf 0402 10% 16V  
Johnson Connectors Model 142-0701-801 SMA RF Coaxial Connector  
Mil-Max Model 800-10-064-10-001 Header Pins  
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
mysoiservices@honeywell.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
2002 4511W  
Published June 2002 Page 4  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  
HRF-AT4511  
Evaluation Circuit Board Connections  
Digital  
Gnd  
VDD  
Data  
CLK  
Gnd  
OE  
VSS  
HRF-AT4511  
Evaluation Board  
RF In  
RF Out  
Top View  
HRF-AT4511  
Honeywell  
Performance Curves  
Insertion Loss  
S12(00000)  
S12(00001)  
S12(00010)  
S12(00011)  
S12(00100)  
S12(00101)  
S12(00110)  
S12(00111)  
S12(01000)  
S12(01001)  
S12(01010)  
S12(01011)  
S12(01100)  
S12(01101)  
S12(01110)  
S12(01111)  
S12(10000)  
S12(10001)  
S12(10010)  
S12(10011)  
S12(10100)  
S12(10101)  
S12(10110)  
S12(10111)  
S12(11000)  
S12(11001)  
S12(11010)  
S12(11011)  
S12(11100)  
S12(11101)  
S12(11110)  
S12(11111)  
AT4511 Insertion Loss By Attenuation State Vs Frequency  
Frequency (GHz)  
0
-2  
0
0.5  
1
1.5  
2
2.5  
3
3.5  
4
-4  
-6  
-8  
-10  
-12  
-14  
-16  
-18  
-20  
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
mysoiservices@honeywell.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
2002 4511W  
Published June 2002 Page 5  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  
HRF-AT4511  
Return Loss  
S11(00000)  
S11(00001)  
S11(00010)  
S11(00011)  
S11(00100)  
S11(00101)  
S11(00110)  
S11(00111)  
S11(01000)  
S11(01001)  
S11(01010)  
S11(01011)  
S11(01100)  
S11(01101)  
S11(01110)  
S11(01111)  
S11(10000)  
S11(10001)  
S11(10010)  
S11(10011)  
S11(10100)  
S11(10101)  
S11(10110)  
S11(10111)  
S11(11000)  
S11(11001)  
S11(11010)  
S11(11011)  
S11(11100)  
S11(11101)  
S11(11110)  
S11(11111)  
AT4511 Return Loss By Attenuation State Vs Frequency  
Frequency (GHz)  
0
-10  
-20  
-30  
-40  
-50  
-60  
0
0.5  
1
1.5  
2
2.5  
3
3.5  
4
S22(00000)  
S22(00001)  
S22(00010)  
S22(00011)  
S22(00100)  
S22(00101)  
S22(00110)  
S22(00111)  
S22(01000)  
S22(01001)  
S22(01010)  
S22(01011)  
S22(01100)  
S22(01101)  
S22(01110)  
S22(01111)  
S22(10000)  
S22(10001)  
S22(10010)  
S22(10011)  
S22(10100)  
S22(10101)  
S22(10110)  
S22(10111)  
S22(11000)  
S22(11001)  
S22(11010)  
S22(11011)  
S22(11100)  
S22(11101)  
S22(11110)  
S22(11111)  
AT4511 Return Loss By Attenuation State Vs Frequency  
Frequency (GHz)  
0
-10  
-20  
-30  
-40  
-50  
-60  
0
0.5  
1
1.5  
2
2.5  
3
3.5  
4
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
mysoiservices@honeywell.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
2002 4511W  
Published June 2002 Page 6  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  
HRF-AT4511  
Step Accuracy  
AT4511 Step Accuracy Vs Attenuation  
0.5  
0.3  
0.1  
-0.1  
-0.3  
-0.5  
-0.7  
-0.9  
-1.1  
-1.3  
-1.5  
StepAcc@0.01GHz  
StepAcc@0.1GHz  
StepAcc@0.5GHz  
StepAcc@1GHz  
StepAcc@2GHz  
StepAcc@3GHz  
StepAcc@4GHz  
0
2
4
6
8
10  
12  
14  
16  
Programmed Attenuation (dB)  
Relative Accuracy  
AT4511 Relative Accuracy Vs Attenuation  
1.5  
1
RelAcc@0.01GHz  
RelAcc@0.1GHz  
RelAcc@0.5GHz  
RelAcc@1GHz  
RelAcc@2GHz  
RelAcc@3GHz  
RelAccMax  
0.5  
0
RelAccMin  
0
2
4
6
8
10  
12  
14  
16  
-0.5  
-1  
-1.5  
Programmed Attenuation (dB)  
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
mysoiservices@honeywell.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
2002 4511W  
Published June 2002 Page 7  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  
HRF-AT4511  
Ordering Information  
Ordering Number  
HRF-AT4511-B  
Delivery Method  
Units Per Shipment  
Customer Specific, Usually Minimum  
Of 50 Per Chip Tube  
In Chip Tubes  
HRF-AT4511-TR  
On Tape And Reel3  
3000 Units Per Reel  
HRF-AT4511-E  
On Individual Engineering Evaluation Board  
One Board Per Box  
(Note 3) Call Honeywell for details  
LPCC™ is a registered Trademark of ASAT Ltd.  
Honeywell reserves the right to make changes to improve reliability, function or design. Honeywell does not assume  
any liability arising out of the application or use of any product or circuit described herein; neither does it convey any  
license under its patent rights nor the rights of others.  
________________________________________________________________________________________________________  
Web Site:  
Email:  
www.mysoiservices.com  
mysoiservices@honeywell.com  
Honeywell  
Solid State Electronics Center  
12001 State Highway 55  
2002 4511W  
Published June 2002 Page 8  
Plymouth, Minnesota 55441-4799  
1-800-323-8295  

相关型号:

HRF-AT4511-TR

15.5 dB, DC-4GHz, 5 Bit Serial Digital Attenuator
HONEYWELL

HRF-AT4520

31.0 dB, DC-4GHz, 5 Bit Parallel Digital Attenuator
HONEYWELL

HRF-AT4520-AU-TR

Analog Circuit,
HONEYWELL

HRF-AT4520-B

31.0 dB, DC-4GHz, 5 Bit Parallel Digital Attenuator
HONEYWELL

HRF-AT4520-E

31.0 dB, DC-4GHz, 5 Bit Parallel Digital Attenuator
HONEYWELL

HRF-AT4520-FL-TR

Variable Attenuator, 0MHz Min, 4000MHz Max, 5.8dB Insertion Loss-Max, HALOGEN FREE AND ROHS COMPLIANT, SURFACE MOUNT, VQFN-24
HONEYWELL

HRF-AT4520-GR-TR

暂无描述
HONEYWELL

HRF-AT4520-TR

31.0 dB, DC-4GHz, 5 Bit Parallel Digital Attenuator
HONEYWELL

HRF-AT4521

31.0 dB, DC-4GHz, 5 Bit Serial Digital Attenuator
HONEYWELL

HRF-AT4521-AU-T

Analog Circuit
HONEYWELL

HRF-AT4521-AU-TR

Analog Circuit,
HONEYWELL

HRF-AT4521-B

31.0 dB, DC-4GHz, 5 Bit Serial Digital Attenuator
HONEYWELL