HRF-SW1031-TR [HONEYWELL]
SP6T Absorptive RF Switch; SP6T吸收射频开关型号: | HRF-SW1031-TR |
厂家: | Honeywell |
描述: | SP6T Absorptive RF Switch |
文件: | 总6页 (文件大小:96K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HRF-SW1031
Preliminary
SP6T Absorptive RF Switch
Features
•
•
•
•
•
•
•
•
High Isolation Of > 40 dB @ 2 GHz
Low Insertion Loss Of 1.9 dB @ 2 GHz
DC To 3000 MHz Operating Frequency
Integrated CMOS Control Logic
Integrated ESD Protection on Digital I/O
Single Positive Supply Voltage
Ultra Small LPCCTM Packaging
Impedance matched to 75 Ohm systems
Product Description
The Honeywell HRF-SW1031 is a high performance
single pole six throw (SP6T) absorptive RF switch that
is ideal for use in wireless basestation and handset
applications that require minimum power and minimum
insertion loss.
HRF-SW1031 in LPCC™ Package
The HRF-SW1031 is manufactured with Honeywell's
patented Silicon On Insulator (SOI) CMOS technology,
which provides the performance of GaAs with the
economy and integration capabilities of conventional
CMOS technology.
RF Electrical Specifications @ + 25oC
Results @ Vdd = 5.0 +/- 10%, Vss = 0 unless otherwise stated, Z0 = 75 ohms
Parameter
Test Condition
Frequency
DC – 1.0 GHz
2.0 GHz
Minimum
Typical
Maximum
Units
dB
dB
Insertion Loss
1.7
1.9
3.0 GHz
2.4
dB
Isolation
DC – 1.0 GHz
2.0 GHz
54
41
dB
dB
3.0 GHz
33
dB
VSWR*
DC – 0.5 GHz
0.5 – 2.0 GHz
2.0 – 3.0 GHz
1.1:1
1.4:1
1.9:1
Ratio
Ratio
Ratio
2.1:1
1dB Compression
Input IP3
Input Power
Vss=Gnd
Vss= -3
1.0 GHz
1.0 GHz
19
28
dBm
dBm
Two-Tone Inputs Up To + 5 dBm
Vss= Gnd
2.0 GHz
2.0 GHz
35
>35
10
20
10
dBm
dBm
nS
nS
mV
Vss= -3
Trise, Tfall*
Ton, Toff
Transients
10% To 90%
50% Cntl To 90%/10%Rf
In-Band
*By design
________________________________________________________________________________________________________
Web Site:
Email:
www.mysoiservices.com
mysoiservices@honeywell.com
Honeywell
Solid State Electronics Center
12001 State Highway 55
2002 1031W
Published June 2002 Page 1
Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-SW1031
DC Electrical Specifications @ + 25oC
Preliminary
Parameter
Single VDD Supply Voltage
Minimum
3.3*
Typical
Maximum
5.5
Units
V
5.0
CMOS Logic Level (0)
0
0.8
V
CMOS Logic Level (1)
VDD – 0.8
VDD
V
Input Leakage Current
10
uA
*Note, performance curves are for Vdd = +5.0 +/- 10%
Absolute Maximum Ratings1
Parameter
Absolute Maximum
Units
VDD
+6.0
V
Vin Digital Logic 0
Vss - 0.6
Vdd + 0.6
> 35
V
V
Vin Digital Logic 1
Maximum Input Power
ESD Voltage
dBm
400
V
Operating Temperature Range
Storage Temperature Range
+85
Degrees C
Degrees C
+125
(Note 1) Operation beyond any of these parameters may cause permanent damage.
Latch-Up: Unlike conventional CMOS RF switches, Honeywell's HRF-SW1031 is immune to latch-up.
ESD Protection: Although this device contains ESD protection circuitry on all digital inputs, conventional precautions should be
taken to ensure that the Absolute Maximum Ratings are not exceeded.
Package Outline Drawing
Bottom View, 24 Pin 4X4 mm LPCCTM Package
ASAT LPCC Marketing Outline Dwg. # GMJ00004
________________________________________________________________________________________________________
Web Site:
Email:
www.mysoiservices.com
mysoiservices@honeywell.com
Honeywell
Solid State Electronics Center
12001 State Highway 55
2002 1031W
Published June 2002 Page 2
Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-SW1031
Preliminary
Truth Table
C2
0
0
0
1
C1
0
1
1
0
C0
1
0
1
0
RF Output 1 RF Output 2 RF Output 3 RF Output 4 RF Output 5
RF Output 6
RFINPUT
RFINPUT
RFINPUT
RFINPUT
RFINPUT
1
0
1
1
1
0
RFINPUT
"0" = CMOS Low, "1” = CMOS High
Note: For codes 000 and 111 all outputs are in the terminated isolation state.
Pin Configuration
Pin
1
Function
GROUND
GROUND
RFOUTPUT5
GROUND
GROUND
RFOUTPUT4
VDD
Pin
13
14
15
16
17
18
19
20
21
22
23
24
Function
GROUND
DIGITAL GROUND
RFOUTPUT2
GROUND
2
3
4
5
6
7
8
9
GROUND
RFOUTPUT1
GROUND
GROUND
RFINPUT
GROUND
GROUND
RFOUTPUT6
C2
C1
C0
VSS
10
11
12
RFOUTPUT3
Evaluation Circuit Board Connections
RF Out6
RF Input
HRF-SW1030
Honeywell
RF Out1
RF Out5
HRF-SW1031
Evaluation Board
Top View
RF Out4
RF Out2
Gnd
VDD
C2
RF Out3
C1
C0
VSS
Digital Gnd
“0” = CMOS Low, “1” = CMOS High
Note:
_______________________H_R_F_-_S_W_1_0_31__is_th_e_Z_0_=__75__oh_m__ve_r_si_on__of_t_he__SW__1_03_0_e_v_a_lu_a_tio_n_b_o_a_rd_.__________________________________
Web Site:
Email:
www.mysoiservices.com
mysoiservices@honeywell.com
Honeywell
Solid State Electronics Center
12001 State Highway 55
2002 1031W
Published June 2002 Page 3
Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-SW1031
Performance Curves
Insertion Loss
Preliminary
SW1031 Insertion Loss vs Frequency
0.00
-0.50
-1.00
-1.50
-2.00
-2.50
dB(S(2,1))[0,::]
0.5
0
1
1.5
2
2.5
3
Frequency (GHz)
Isolation
SW1031 Isolation Vs Frequency
0.00
-10.00
-20.00
-30.00
-40.00
-50.00
-60.00
-70.00
-80.00
-90.00
-100.00
dB(S(3,1))[0,::]
2.5
0
0.5
1
1.5
2
3
Frequency (GHz)
________________________________________________________________________________________________________
Web Site:
Email:
www.mysoiservices.com
mysoiservices@honeywell.com
Honeywell
Solid State Electronics Center
12001 State Highway 55
2002 1031W
Published June 2002 Page 4
Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-SW1031
Preliminary
Return Loss
SW1031 Return Loss Vs Frequency
0.00
-2.00
-4.00
-6.00
-8.00
S11
S22
-10.00
-12.00
-14.00
-16.00
-18.00
-20.00
S33
dB(S(1,1))[0,::]
dB(S(2,2))[0,::]
dB(S(3,3))[0,::]
0
0.5
1
1.5
2
2.5
3
Frequency (GHz)
P1dB
SW1031 P1dB Vs Frequency
35
30
25
20
15
10
5
PoutLinear
Pout 1GHz
Pout 2GHz
Pout 3 GHz
0
0
5
10
15
20
25
30
35
Input Power (dBm)
________________________________________________________________________________________________________
Web Site:
Email:
www.mysoiservices.com
mysoiservices@honeywell.com
Honeywell
Solid State Electronics Center
12001 State Highway 55
2002 1031W
Published June 2002 Page 5
Plymouth, Minnesota 55441-4799
1-800-323-8295
HRF-SW1031
Preliminary
Evaluation Circuit Board
Honeywell's evaluation board provides an
easy to use method of evaluating the RF
performance of our switch. Simply connect
power, DC and RF signals to be measuring
switch performance in less than 10
minutes.
HRF-SW1031 Evaluation Board
Evaluation Circuit Board Layout Design Details
Item
Description
PCB
Impedance Matched Multi-Layer FR4
Switch
HRF-SW1031 RF Switch
Chip Capacitor
RF Connector
DC Pin
Panasonic Model ECU-E1C103KBQ Capacitor, .01uf 0402 10% 16V
Johnson Connectors Model 142-0701-801 SMA RF Coaxial Connector
Mil-Max Model 800-10-064-10-001 Header Pins
Ordering Information
Ordering Number
HRF-SW1031-B
HRF-SW1031-TR
HRF-SW1031-E
Product
Delivered In Chip Tubes
Delivered On Tape And Reel2
Engineering Evaluation Board
(Note 2) Contact Honeywell for details
LPCCTM is a registered Trademark of ASAT Ltd.
Honeywell reserves the right to make changes to improve reliability, function or design. Honeywell does not assume
any liability arising out of the application or use of any product or circuit described herein; neither does it convey any
license under its patent rights nor the rights of others.
________________________________________________________________________________________________________
Web Site:
Email:
www.mysoiservices.com
mysoiservices@honeywell.com
Honeywell
Solid State Electronics Center
12001 State Highway 55
2002 1031W
Published June 2002 Page 6
Plymouth, Minnesota 55441-4799
1-800-323-8295
相关型号:
HRF-SW1040-B
SP4T, 824MHz Min, 1990MHz Max, 1 Func, 13dB Insertion Loss-Max, CMOS, ULTRA SMALL, LPCC
HONEYWELL
©2020 ICPDF网 联系我们和版权申明