PX3EG1BS016BSCHX [HONEYWELL]
Peizoresistive Sensor,;型号: | PX3EG1BS016BSCHX |
厂家: | Honeywell |
描述: | Peizoresistive Sensor, |
文件: | 总10页 (文件大小:2278K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Heavy Duty Pressure Transducers
32313757
PX3 Series, 1 bar to 50 bar | 15 psi to 700 psi
Issue F
Datasheet
Figure 2. PX3 Series External Freeze/Thaw Resistance
(Shown with mating connector, see Figure 5.)
• Reduced current consumption: Helps to reduce energy costs,
and enhances product life if used in battery driven systems.
• Media compatibility: Common HFC (hydrofluorocarbon)
refrigerants (R410A and R134A), next generation low
global warming potential (GWP) refrigerants (R448A/
Solstice® N40, R32 and R1234ZE), engine oil, petroleum-
based hydraulic fluids, brake fluids (DOT3), and dry air. For
ammonia and other corrosive media, see Honeywell’s SPT Series.
DIFFERENTIATION
• Optional diagnostics mode: Beneficial in applications where
the sensor functionality and the need to know internal or
external failure modes is critical.
DESCRIPTION
Honeywell’s PX3 Series Heavy Duty Pressure Transducers
use piezoresistive sensing technology with ASIC (Application
Specific Integrated Circuit) signal conditioning in a brass
housing and Metri-Pack 150, DIN, or cable harness electrical
connections. The PX3 Series is calibrated and temperature
compensated from -40°C to 125°C ꢁ-40°F to 257°F].
• Great customer value: Multiple configuration possibilities
provide flexibility of use in the application with no upfront
NRE or tooling charges.
• Durable: Provides the tough environmental specifications
needed, including insulation resistance and dielectric
strength, external freeze-thaw resistance (see Figure 2),
and EMC performance.
VALUE TO CUSTOMERS
• 4 mA to 20 mA output is temperature compensated up to 125°C.
• Total Error Band (TEB) 1.0 ꢀFSS from -20°C to 85°C:
Provides indication of the sensor’s true measurement
performance over a specified temperature range; small
error promotes system uptime and efficiency. (See Figure 1.)
FEATURES
• Pressure range: 1 bar to 50 bar | 15 psi to 700 psi (absolute
and sealed gage)
• Ratiometric output: 0.5 Vdc to 4.5 Vdc or 0.33 Vdc to 2.97 Vdc
• 4 mA to 20 mA output supports transmission of output
signals over longer distances
Figure 1. TEB Definition and Temperature Performance
• Calibrated and temperature compensated
• Total Error Band: 1.0 ꢀFSS from -20°C to 85°C ꢁ-4°F to 185°F]
• External freeze/thaw resistance: 6 cycles from -30°C to
50°C ꢁ-22°F to 122°F]
Sources of Error
Offset
Full Scale Span
Pressure Non-Linearity
Total
Error
Band
Accuracy
BFSL
• Insulation resistance: >100 MOhm, 1500 Vdc (in dry, non-
ionized air)
Pressure Hysteresis
Pressure Non-Repeatability
Thermal Effect on Offset
Thermal Effect on Span
Thermal Hysteresis
• Dielectric strength: AC1500V, 1 min. or AC1800V, 1 s (in dry, non-
ionized air)
• Current consumption: 3.5 mA max.
• EMC (radiated immunity): 200 V/m (ratiometric voltage
output), 140 V/m (current output) per ISO 11452-2
• Ingress protection IP67 (Metri-Pack connector), IP69K
(cable harness), IP65 (DIN connector)
3
2
1
Total Error Band
• RoHS, REACH, and CE compliant
0
-1
-2
-3
• Six industry-standard pressure port types, including a tube port
which provides for hermetically-sealed process connection
POTENTIAL APPLICATIONS
• Industrial: Refrigerant pressure monitoring in HVAC/R
systems; dry air system pressure, process controls and
automation
-40°C
[-40°F]
0°C
85°C
[185°F]
-20°C
[-4°F]
125°C
[257°F]
[32°F]
Temperature (°C [°F])
• Transportation: Dry air system monitoring; hydraulic, brake,
and engine oil fluid pressure monitoring; air brake pressure
monitoring
• Higher insulation resistance and dielectric strength:
Protects the user and sensor in high over-voltage
situations, and ensures that the device is compliant with
industry standards.
• Higher EMC performance: Operates more reliably in the
presence of electro-magnetic fields, such as near wireless
signals, RF communication, and electrical devices.
• Higher external freeze/thaw resistance: Survives exposure to
frost, commonly found in refrigeration systems. (See Figure 2.)
The PX3 Series is not recommended for use with media
involving water, saturated air such as steam and vapor, and
ammonia.
PORTFOLIO
Honeywell’s PX3 Series joins the PX2 Series, MLH Series, and
SPT Series heavy duty pressure transducers.
Sensing and Internet of Things
Heavy Duty Pressure Transducers
PX3 Series, 1 bar to 50 bar | 15 psi to 700 psi
Table 1. Electrical Specifications
Characteristic
Parameter
Supply voltage:
ratiometric voltage output:
5 Vdc
5 Vdc 0.25 Vdc
3 Vdc 0.25 Vdc
3.3 Vdc
current output:
-40°C to 100°C
>100°C to 125°C
8 Vdc to 30 Vdc
8 Vdc to 25 Vdc
Over voltage and reverse voltage:
ratiometric voltage output
current output
16 Vdc
35 Vdc
Current consumption:
5 Vdc supply
3.0 mA max.
1.6 mA to 2.1 mA
3.3 Vdc supply
Short circuit protection
yes
Nominal output transfer function:
5 Vdc supply
0.5 Vdc to 4.5 Vdc (ratiometric to supply)
0.33 Vdc to 2.97 Vdc (ratiometric to supply)
4 mA to 20 mA
3.3 Vdc supply
8 Vdc to 30 Vdc supply
Table 2. Performance Specifications (At 25°C [77°F] and under unless otherwise noted.)
Characteristic
Parameter
Operating temperature range1
Storage temperature range1
Compensated temperature range
-40°C to 125°C ꢁ-40°F to 257°F]
-40°C to 125°C ꢁ-40°F to 257°F]
-40°C to 125°C ꢁ-40°F to 257°F]
Total Error Band2:
-20°C to 85°C ꢁ-4°F to 185°F]
<-20°C, >85°C ꢁ<-4°F, >185°F]
1.0 ꢀFSS
2.0 ꢀFSS
Accuracy BFSL3
Response time
Turn on time4
0.25 ꢀFSS
<2 ms (10ꢀ to 90ꢀ step change in pressure)
<7 ms
EMC rating5:
surge immunity (all leads)
electrostatic discharge
radiated immunity
fast transient burst
1000 V line to ground per IEC 61000-4-5
4 kV contact, 8 kV air per IEC 61000-4-2
10 V/m (80 MHz to 1000 MHz) per IEC 61000-4-3
1 kV per IEC 61000-4-4
immunity to conducted disturbances 3 V per IEC 61000-4-6
radiated emissions
40 dBμV (30 MHz to 230 MHz), 47 dBμV (230 MHz to 1000 MHz) per CISPR 11
radiated immunity:
ratiometric (voltage) output
4 mA to 20 mA (current) output
200 V/m per ISO 11452-2
140 V/m per ISO 11452-2
Insulation resistance6:
ratiometric voltage output
current output
>100 MOhm at 1500 Vdc
>100 MOhm at 1000 Vdc
Dielectric strength
Load resistance6:
<1 mA at 1500 Vac (1 min) or 1800 Vac (1 s)
ratiometric voltage output
current output
>5 kOhm
(Vin - 8) x 50 Ohm
Life
>10 million full scale pressure cycles over the calibrated pressure range
1 Dependent on seal material. See Figure 5.
2 Total Error Band: The maximum deviation from the ideal transfer function over the entire compensated temperature and pressure range. Includes all
errors due to offset, full scale span, pressure non-linearity, pressure hysteresis, pressure non-repeatability, thermal effect on offset, thermal effect
on span, and thermal hysteresis.
3 Accuracy: The maximum deviation in output from a Best Fit Straight Line (BFSL) fitted to the output measured over the pressure range at 25°C
ꢁ77°F]. Includes all errors due to pressure non-linearity, pressure hysteresis, and pressure non-repeatability.
4 Turn on time: Duration from power applied until first valid output for voltage output. Typical value for 4 mA to 20 mA output.
5 Tested using 1,5 m ꢁ59.1 in] long cable.
6 Tested in dry, non-ionized air.
Sensing and Internet of Things
2
Heavy Duty Pressure Transducers
PX3 Series, 1 bar to 50 bar | 15 psi to 700 psi
Table 3. Pressure Reference Definitions
Pressure Reference Definition
Output is calibrated to be proportional to the difference between applied pressure and a fixed reference to
perfect vacuum (absolute zero pressure).
Absolute
Sensor construction is identical to the absolute version with a built in reference at zero pressure in order to
minimize measurement error over temperature. The output is calibrated to be proportional to the difference
between applied pressure and a reference of 1 standard atmosphere (1.013 barA | 14.7 psiA). Example: 100
psi sealed gage has a calibrated pressure range from 14.7 psi absolute to 114.7 psi absolute. (See Figure 3.)
Sealed gage1
1 Sealed gage option only available in pressure ranges at or above 8 bar | 100 psi.
Diagnostics Mode (For Ratiometric Voltage Output Only)
Figure 3. Ratiometric Output Option AA for 100 psi,
Absolute vs Sealed Gage
The PX3 Series diagnostics mode allows the device to
indicate when internal or external faults occur. If an internal
fault occurs, the output will rail to the preset lower or upper
limit values shown in Figure 4 and Table 5.
5
4.5
4
External faults will result in the sensor’s output exceeding
those preset limits (lower or upper). (For example, if the
external sensor ground (signal) were lost, the sensor output
would exceed the upper rail of 97.5ꢀ.)
3.5
3
2.5
100 psi absolute
100 psi sealed gage
2
1.5
Figure 4. Analog Output with Diagnostics
100
1
0.5
0
Upper Rail (97.5%)
90
80
70
60
0
20
40
60
80
100
120
114.7
140
14.7
Pressure (psi Absolute)
50
40
30
20
Table 4. Pressure Ratings
bar
psi
Operating Over-
10
Operating Over-
Pressure pressure Pressure Pressure pressure Pressure
Burst
Burst
Lower Rail (2.5%)
0
10 20 30 40 50 60 70 80 90 100
Pressure (psi)
1
1.6
2
5
8
15
30
70
150
250
450
450
450
450
450
1000
1000
1000
1000
1000
-
115
250
400
750
750
750
1150
1150
1500
1500
1500
1500
1500
-
5
8
Table 5. Output Transfer Function Codes
Fault Condition
10
10
17
31
31
31
31
32
69
69
69
69
69
69
69
17
50
Analog Diagnostic Rail
2.5
4
17
100
150
174
200
250
300
500
600
667
700
-
EEPROM Corrupt
below lower rail
27
6
51
Sensor Bridge Open
(any element)
above upper rail
above upper rail
8
51
10
12
16
20
25
30
35
40
46
50
51
Sensor Bridge Short
(any element)
51
80
Low supply voltage
below lower rail
above upper rail
103
103
103
103
103
103
103
Loss of ground connection
-
-
-
-
-
-
-
-
-
Sensing and Internet of Things
3
Heavy Duty Pressure Transducers
PX3 Series, 1 bar to 50 bar | 15 psi to 700 psi
Table 6. Environmental and Mechanical Specifications
Characteristic
Parameter
Shock:
threaded ports
tube port
100 G per MIL-STD-202G, Method 213B, Cond. F (at 25°C ꢁ77°F])
100 G per MIL-STD-202F, Method 213B, and Condition C
Vibration:
threaded ports
tube port
20 G sweep, 10 Hz to 2000 Hz (at 25°C ꢁ77°F])
10 Hz to 55 Hz, 2 mm displacement, tested as per IEC 60068-2-6; Test FC. (at 25°C ꢁ77°F])
Ingress protection:
Metri-Pack 150 electrical connector
DIN electrical connector
IP67
IP65
Cable harness electrical connector
IP65, IP67, IP69K
Ambient humidity
0 ꢀRH to 95 ꢀRH, non-condensing
External freeze/thaw resistance
>6 cycles from -30°C to 50°C ꢁ-22°F to 122°F]
Wetted materials:
threaded ports
brass C36000; lead (Pb) content: 3.7ꢀ max.
external seals for ports
tube port
nitrile
copper UNS C12200; lead (Pb) free
braze filler
silver and copper alloy
internal O-ring media seal
sensing element and substrate
adhesives
seal material based on application (see seal material media compatibility options below)
alumina, glass, silicon
epoxy
Internal O-ring material media compatibility1:
HNBR (option H)
refrigerants, engine oil, petroleum-based hydraulic fluid
dry air
silicone (option S)
Electrical connector material
PBT 30ꢀ GF
1 Honeywell can assist with selecting suitable O-ring seal material for the media based on the seal manufacturer’s recommendation. The customer
should test the compatibility with the media to ensure that it is correct for the application.
CAUTION
PRODUCT DAMAGE TO TUBE PRESSURE PORT TYPE DURING BRAZING
Ensure that the temperature of the brass port and plastic connector is maintained below 125°C during flame brazing.
Exposure to temperatures higher than 125°C can cause permanent product damage and can compromise ingress protection
leading to short circuits.
Failure to comply with these instructions may result in product damage.
CAUTION
PRODUCT DAMAGE DUE TO MECHANICAL ISSUES
• Ensure torque specifications are determined for the specific application. Values provided are for reference only. (Mating
materials and thread sealants can result in significantly different torque values from one application to the next.)
• When using mating parts made of stainless steel, use a thread sealant with anti-seize properties to prevent thread galling.
Ensure the sealant is rated for the application.
• Use appropriate tools (such as an open ended wrench or deep well socket) to install transducers.
• Always hand-start transducers into the hole to prevent cross threading and damage.
• Ensure that torque is not applied to the electrical connector.
• Ensure that the proper mating electrical connector with a seal is used to connect the transducer. Improper or damaged
seals can compromise ingress protection, leading to short circuits.
Failure to comply with these instructions may result in product damage.
CAUTION
PRODUCT DAMAGE DUE TO PARTICULATES AND SATURATED AIR
Ensure that filters and dehumidifiers are used upstream of the transducers to keep media flow free of large particulates and
condensed moisture. PX3 Series transducers are dead-end devices. Particulate accumulation may clog the port or damage
the diaphragm. Condensing moisture may affect sensor output and lower insulation resistance.
Failure to comply with these instructions may result in product damage.
CAUTION
PRODUCT DAMAGE DUE TO CONDUCTIVE MEDIA
Ensure sensor is not used with conductive or ionic media. These media can affect sensor output and lower insulation resistance.
Failure to comply with these instructions may result in product damage.
Sensing and Internet of Things
4
Heavy Duty Pressure Transducers
PX3 Series, 1 bar to 50 bar | 15 psi to 700 psi
Figure 5. Nomenclature and Order Guide
For example, PX3AN1BS150PAAAX defines a PX3 Series Heavy Duty Pressure Transducer, Metri-Pack 150,
standard (UL V-0) electrical connector type, 1/4-18 NPT pressure port type, brass housing body, silicone:
-40°C to 125°C [-40°F to 257°F] seal material and temperature range, 150 psi pressure range, absolute pressure
reference, ratiometric: 0.5 Vdc to 4.5 Vdc output transfer function, no special
PX3 A N1 B S 150P A AA X
Special
X
Series
Heavy Duty
PX3
Pressure Transducer1
Output Transfer Function
AA Ratiometric: 5.0 V, 10% to 90% Vs
DA Ratiometric: 5.0 V, 10% to 90% Vs (diagnostics on)6
AC Ratiometric: 3.3 V, 10% to 90% Vs
DC Ratiometric: 3.3 V, 10% to 90% Vs (diagnostics on)6
CH Current: 4 mA to 20 mA
Electrical Connector Type
Metri-Pack 150,
A
Standard (UL V-0)2
DIN
(Male, EN 175301-803C)
C
Pressure Reference
Absolute
Sealed gage7
PVC Cable3
XLPE Cable3
A
S
-40°C to 105°C -40°C to 125°C
[-40°F to 221°F] [-40°F to 257°F]
Pressure Range
bar
two or three
22 AWG wires
two or three
22 AWG wires
psi
001B 1 bar
016B 16 bar
1.6B 1.6 bar 020B 20 bar
002B 2 bar 025B 25 bar
2.5B 2.5 bar 030B 30 bar
015P 15 psi
250P 250 psi
300P 300 psi
500P 500 psi
0.5 m [1.3ft]
1.0 m [3.2 ft]
2.0 m [6.6 ft]
3.0 m [9.8 ft]
5.0 m [16.4 ft]
K
E
F
L
M
N
P
030P 30 ps
i
050P 50 psi
100P 100 psi 600P 600 psi
150P 150 psi 667P 667 psi
174P 174 psi 700P 700 psi
200P 200 psi
004B 4 bar
006B 6 bar
008B 8 bar
010B 10 bar 050B 50 bar
012B 12 bar
035B 35 bar
040B 40 bar
046B 46 bar
G
H
Q
Three-wire cable is required
for ratiometric Output Transfer
Functions AA, DA, AC and DC;
two-wire cable is required for
Output Transfer Function CH.
Internal O-ring Material and Temperature Range1, 8
HNBR (Hydrogenated Nitrile Butadiene Rubber):
H
-30°C to 125°C [-22°F to 257°F]
S
Silicone: -40°C to 125°C [-40°F to 257°F]
Three meter and five meter
cables are only available
with Output Transfer
Function CH.
Housing Body Material
three-wire two-wire
B Brass (C36000)
Pressure Port Type4
1 Not all catalog listing combinations are shown. Custom configurations,
such as varied cable lengths, end mating connectors, different O-ring
materials, and different pressure ranges are available. Please contact
Honeywell.
7/16-20 UNF
1/4 inch 45° Flare
Female Schrader
F1
(SAE J512)
2 Metri-Pack 150 mating connectors with shielded cable and three 22 AWG
wires are available from Honeywell. Order part no. 3685301 for 1 m [3.2 ft]
cable length and part no. 3685302 for 3 m [9.8 ft] cable length.
G1/4 A-G
(ISO 1179-3)
G1
3 PVC Flame Retardant (FR) type cable is FT1 rated per IEC60332-1; XLPE
non-flame retardant cable is FT2 rated per IEC60332-1.
G1/4 A-L
G2
4 See Table for pressure port materials.
(ISO 1179-2)
5 Tube port is not available with DIN connector option.
6 See page 3 for Diagnostics Mode information.
M12 x 1.5
(ISO 6149-3)
7 Sealed gage option only available in pressure ranges at or above 8 bar | 100 psi.
8 See Table 6 for O-ring seal material media compatibility.
M1
1/4-18 NPT
(ANSI/ASME B1.20.1)
N1
Mating Connector2
1/8-27 NPT
(ANSI/ASME B1.20.1)
N2
T1 Tube5
Sensing and Internet of Things
5
Heavy Duty Pressure Transducers
PX3 Series, 1 bar to 50 bar | 15 psi to 700 psi
Figure 6. Metri-Pack Mounting Dimensions (For reference only. mm/[in].) E
General product marking
Pinout
Ratiometric Voltage Output
Pin A = Ground
F1, G1, G2, M1, N1, N2
T1
Pin A
Pin A
Pin B = V+
Pin C = Vout
Yellow lettering
22,0
[0.87]
Current Output
Pin A = Return
Pin B = Supply
Pin C = Not connected
Pin C
Pin C
Pin B
Pin B
F1: 7/16-20 UNF 1/4 inch 45° Flare
Female Schrader (SAE J512)
Seal: 45° cone
G1: G1/4 A-G (ISO 1179-3)
Seal: O-ring (included)
G2: G1/4 A-L (ISO 1179-2)
Seal: ISO 9974-2/DIN 3869 profile ring (included)
Mating geometry: ISO 1179-1
Mating geometry: ISO 1179-1
Mating geometry: SAE J512
Installation torque: 15 N m ꢁ11.1 ft-lb] max.
Weight: 35,1 g to 40,1 g ꢁ1.2 oz to 1.4 oz]
Installation torque: 15 N m ꢁ11.1 ft-lb] max.
Weight: 35,1 g to 40.1 g ꢁ1.2 oz to 1.4 oz]
Installation torque: 17 N m ꢁ12.5 ft-lb] max.
Weight: 41 g to 46 g ꢁ1.4 oz to 1.6 oz]
ø17,0
ø17,0
[0.67]
ø17,0
[0.67]
[0.67]
ø21,6
ø21,6
[0.85]
ø21,6
34,9
[1.37]
37,4
[1.47]
[0.85]
35,9
[0.85]
[1.41]
47,1
[1.85]
13,9
48,9
[1.93]
49,6
[1.95]
12,9
[0.51]
15,4
[0.61]
[0.55]
14,0
[0.55]
Profile ring
12,2
[0.48]
11,2
[0.44]
O-ring
7/16-20 UNF 1/4 in 45° Flare Female
Schrader (SAE J512)
G1/4 A-G (ISO 1179-3)
G1/4 A-L (ISO 1179-2)
ø15,9
[0.63]
M1: M12 x 1.5 (ISO 6149-3)
Seal: O-ring (included)
N1: 1/4-18 NPT
Seal: Pipe thread
Mating geometry: ISO 6149-1
Mating geometry: ANSI B1.20.1
Installation torque: 12 N m ꢁ8.85 ft-lb] max.
Weight: 33,9 g to 38,9 g ꢁ1.2 oz to 1.4 oz]
Installation torque: Two to three turns from finger tight
Weight: 35,1 g to 40,1 g ꢁ1.2 oz to 1.4 oz]
ø17,0
ø17,0
[0.67]
[0.67]
ø21,6
ø21,6
[0.85]
[0.85]
34,9
[1.37]
35
[1.4]
48,4
[1.91]
50
[2.0]
13
[0.5]
12,9
[0.51]
15,0
[0.59]
13,5
[0.53]
O-ring
M12 x 1.5 (ISO 6149-3)
1/4-18 NPT
N2: 1/8-27 NPT
T1: Tube
ø17,0
[0.67]
Seal: Pipe thread
Seal: Brazing
Mating geometry: ANSI B1.20.1
Weight: 32 g ꢁ1.1 oz]
Installation torque: Two to three turns from finger tight
Weight: 31,2 g to 36.2 g ꢁ1.1 oz to 1.3 oz]
ø17,0
[0.67]
39,5
[1.56]
ø21,6
96,5
[3.80]
[0.85]
36
[1.4]
ø23,0
[0.91]
46
[1.8]
Ensure this area is
protected during the
brazing process so
that temperatures
do not exceed
57,0
[2.24]
14
[0.5]
125°C [257°F].
7,0
[0.27]
10,0
[0.39]
1/8-27 NPT
ø7,3
[0.29]
ø6,35
[0.25]
Sensing and Internet of Things
6
Heavy Duty Pressure Transducers
PX3 Series, 1 bar to 50 bar | 15 psi to 700 psi
Figure 7. DIN Mounting Dimensions (For reference only. mm/[in].) E
Pinout
General product marking
Ratiometric Voltage Output
Pin 1 = Ground
F1, G1, G2, M1, N1, N2
Pin 4
Pin 2
Pin 2 = V+
Pin 1
Pin 3 = Vout
Pin 4 (PE) = Not connected
Yellow lettering
22,0
[0.87]
Current Output
Pin 1 = Return
Pin 2 = Supply
Pin 3
Pin 3 = Not connected
Pin 4 (PE) = Not connected
F1: 7/16-20 UNF 1/4 inch 45° Flare Female Schrader (SAE J512)
Seal: 45° cone
G1: G1/4 A-G (ISO 1179-3)
Seal: O-ring (included)
Mating geometry: SAE J512
Mating geometry: ISO 1179-1
Installation torque: 17 N m ꢁ12.5 ft-lb] max.
Weight: 42 g to 47 g ꢁ1.5 oz to 1.7 oz]
Installation torque: 15 N m ꢁ11.1 ft-lb] max.
Weight: 36,1 g to 41,1 g ꢁ1.3 oz to 1.4 oz]
16,9
[0.66]
ø16,9
[0.66]
ø21,60
[0.85]
ø21,60
[0.85]
37,4
[1.47]
28,9
[1.14]
42,6
[1.68]
15,4
[0.61]
40,1
13,9
[1.58]
[0.55]
12,2
[0.48]
O-ring
11,2
[0.44]
7/16-20 UNF 1/4 in 45° Flare Female
Schrader (SAE J512)
G1/4 A-G (ISO 1179-3)
ø15,9
[0.63]
G2: G1/4 A-L (ISO 1179-2)
M1: M12 x 1.5 (ISO 6149-3)
Seal: O-ring (included)
Seal: ISO 9974-2/DIN 3869 profile ring (included)
Mating geometry: ISO 1179-1
Mating geometry: ISO 6149-1
Installation torque: 15 N m ꢁ11.1 ft-lb] max.
Weight: 36,1 g to 41,1 g ꢁ1.3 oz to 1.4 oz]
Installation torque: 12 N m ꢁ8.85 ft-lb] max.
Weight: 34,9 g to 39,9 g ꢁ1.2 oz to 1.4 oz]
,
ø16,9
ø17,0
[0.66]
[0.67]
ø21,60
[0.85]
ø21,60
27,9
[1.10]
[0.85]
27,9
[1.10]
41,9
[1.65]
41,4
[1.63]
12,9
[0.51]
12,9
[0.51]
14,0
[0.55]
13,5
[0.53]
Profile ring
O-ring
M12 x 1.5 (ISO 6149-3)
G1/4 A-L (ISO 1179-2)
N1: 1/4-18 NPT
N2: 1/8-27 NPT
Seal: Pipe thread
Seal: Pipe thread
Mating geometry: ANSI B1.20.1
Mating geometry: ANSI B1.20.1
Installation torque: Two to three turns from finger tight
Weight: 36,1 g to 41,1 g ꢁ1.3 oz to 1.4 oz]
Installation torque: Two to three turns from finger tight
Weight: 32,2 g to 37,2 g ꢁ1.1 oz to 1.3 oz]
ø16,9
ø16,9
[0.66]
[0.66]
ø21,60
[0.85]
ø21,6
29
[1.1]
28
[1.1]
[0.85]
13
43
39
[1.5]
[0.5]
[1.7]
14
[0.5]
15,0
[0.59]
10,0
[0.39]
1/4-18 NPT
1/8-27 NPT
Sensing and Internet of Things
7
Heavy Duty Pressure Transducers
PX3 Series, 1 bar to 50 bar | 15 psi to 700 psi
Figure 8. Cable Harness Mounting Dimensions (For reference only. mm/[in].)
Wire colors
F1, G1, G2, M1, N1, N2
T1
General product marking
22,0
[0.87]
3-wire
cable
Voltage Output
Black = Ground
Red = V+
White = Vout
White label with
black lettering
Current Output
Black = Return
Red = Supply
22,0
[0.87]
2-wire
cable
F1: 7/16-20 UNF 1/4 inch 45° Flare Female Schrader (SAE J512) G1: G1/4 A-G (ISO 1179-3)
Seal: 45° cone
Seal: O-ring (included)
Mating geometry: SAE J512
Installation torque: 17 N m ꢁ12.5 ft-lb] max.
Weight: 90 g to 88 g ꢁ3.2 oz to 3.1 oz]
Mating geometry: ISO 1179-1
Installation torque: 15 N m ꢁ11.1 ft-lb] max.
Weight: 70 g to 68 g ꢁ2.5 to 2.4 oz]
3-Wire
Cable
2-Wire
Cable
3-Wire
Cable
2-Wire
Cable
1000 50
[39.9 1.9]
1000 50
[39.9 1.9]
1000 50
[39.9 1.9]
1000 50
[39.9 1.9]
33,1
[1.30]
31,6
[1.24]
ø
21,6
ø21,6
[0.85]
[0.85]
45,3
[1.78]
42,75
[1.683]
15,4
[0.61]
13,9
[0.55]
7/16-20 UNF 1/4 in 45° Flare
Female Schrader (SAE J512)
12,2
[0.48]
11,2
[0.44]
O-Ring
G1/4 A-G (ISO 1179-3)
ø
15,9
[0.63]
G2: G1/4 A-L (ISO 1179-2)
M1: M12 x 1.5 (ISO 6149-3)
Seal: O-ring (included)
Seal: ISO 9974-2/DIN 3869 profile ring (included)
Mating geometry: ISO 1179-1
Mating geometry: ISO 6149-1
Installation torque: 12 N m ꢁ8.85 ft-lb] max.
Weight: 69 g to 67 g ꢁ2.4 oz]
Installation torque: 15 N m ꢁ11.1 ft-lb] max.
Weight: 70 g to 68 g ꢁ2.5 oz to 2.4 oz]
3-Wire
2-Wire
Cable
3-Wire
Cable
2-Wire
Cable
Cable
1000 50
[39.9 1.9]
1000 50
[39.9 1.9]
1000 50
[39.9 1.9]
1000 50
[39.9 1.9]
30,6
[1.20]
30,6
[1.20]
ø21,6
[0.85]
ø21,6
[0.85]
44,55
[1.754]
12,9
[0.51]
44,1
12,9
[1.73]
[0.51]
14,0
[0.55]
Profile ring
G1/4 A-L (ISO 1179-2)
13,5
[0.53]
O-Ring
M12 x 1.5 (ISO 6149-3)
Sensing and Internet of Things
8
Heavy Duty Pressure Transducers
PX3 Series, 1 bar to 50 bar | 15 psi to 700 psi
Figure 8. Cable Harness Mounting Dimensions (For reference only. mm/[in].)
N1: 1/4-18 NPT
N2: 1/8-27 NPT
Seal: Pipe thread
Seal: Pipe thread
Mating geometry: ANSI B1.20.1
Installation torque: Two to three turns from finger tight
Weight: 70 g to 68 g ꢁ2.5 oz to 2.4 oz]
Mating geometry: ANSI B1.20.1
Installation torque: Two to three turns from finger tight
Weight: 66 g to 64 g ꢁ2.3 oz]
3-Wire
Cable
2-Wire
Cable
3-Wire
Cable
2-Wire
Cable
1000 50
[39.9 1.9]
1000 50
[39.9 1.9]
1000 50
[39.9 1.9]
1000 50
[39.9 1.9]
30,6
[1.20]
31,6
[1.24]
ø21,6
[0.85]
ø21,6
[0.85]
45,6
[1.79]
12,9
[0.51]
41,6
[1.64]
13,9
[0.55]
15,0
[0.59]
10,0
[0.39]
1/4-18 NPT
1/8-27 NPT
T1: Tube
3-Wire
Cable
2-Wire
Cable
Seal: Brazing
Weight: 67 g ꢁ2.4 oz]
1000 50
[39.9 1.9]
1000 50
[39.9 1.9]
ø23,0
[0.91]
32,2
[1.38]
92,2
[3.63]
Ensure this area is
protected during the
brazing process so that
temperatures do not
exceed 125°C [257°F].
57,0
[2.24]
7,0
[0.27]
ø7,3
[0.29]
ø6,35
[0.25]
Sensing and Internet of Things
9
ADDITIONAL INFORMATION
The following associated literature is available on the
Honeywell web site at sensing.honeywell.com:
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
• Product line guide
• Product range guide
• Product installation instructions
• Application notes:
Failure to comply with these instructions could result in
death or serious injury.
- Heavy Duty Pressure Transducers, PX2 Series and
PX3 Series
WARNING
- PX2 Series and PX3 Series Heavy Duty Pressure
Transducers for Potential Use in Industrial Refrigeration
MISUSE OF DOCUMENTATION
•
The information presented in this datasheet is for
reference only. Do not use this document as a product
installation guide.
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
- PX2 Series and PX3 Series Heavy Duty Pressure
Transducers for Potential Use in Industrial HVAC/R
Applications
•
• Technical notes:
- Total Error Band Specification for Honeywell Heavy
Duty Pressure Transducers, PX2 Series and PX3 Series
Failure to comply with these instructions could result in
death or serious injury.
- Media Compatibility for Honeywell Heavy Duty
Pressure Transducers, PX2 Series and PX3 Series
• CAD models
Warranty/Remedy
Honeywell warrants goods of its manufacture as being free
of defective materials and faulty workmanship during the
applicable warranty period. Honeywell’s standard product
warranty applies unless agreed to otherwise by Honeywell
in writing; please refer to your order acknowledgement or
consult your local sales office for specific warranty details.
If warranted goods are returned to Honeywell during the
period of coverage, Honeywell will repair or replace, at its
option, without charge those items that Honeywell, in its sole
discretion, finds defective. The foregoing is buyer’s sole
remedy and is in lieu of all other warranties, expressed or
implied, including those of merchantability and fitness for
a particular purpose. In no event shall Honeywell be liable
for consequential, special, or indirect damages.
While Honeywell may provide application assistance
personally, through our literature and the Honeywell web site, it
is buyer’s sole responsibility to determine the suitability of the
product in the application.
For more information
Honeywell Sensing and Internet of
Things services its customers through a
worldwide network of sales offices and
distributors. For application assistance,
current specifications, pricing or the
nearest Authorized Distributor, visit
sensing.honeywell.com or call:
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this writing.
However, Honeywell assumes no responsibility for its use.
Asia Pacific
Europe
USA/Canada
+65 6355-2828
+44 (0) 1698 481481
+1-800-537-6945
Solstice® N40 is a registered trademark
of Honeywell International Inc.
Honeywell Sensing and Internet of Things
9680 Old Bailes Road
Fort Mill, SC 29707
32313757-F-EN | F | 07/19
© 2019 Honeywell International Inc.
www.honeywell.com
相关型号:
©2020 ICPDF网 联系我们和版权申明