SCC30AN [HONEYWELL]

Peizoresistive Sensor, Absolute, 0Psi Min, 30Psi Max, 0.5%, -10-105mV, Through Hole Mount, N HOUSING PACKAGE, 4 PIN;


型号：	SCC30AN
厂家：	Honeywell
描述：	Peizoresistive Sensor, Absolute, 0Psi Min, 30Psi Max, 0.5%, -10-105mV, Through Hole Mount, N HOUSING PACKAGE, 4 PIN 传感器换能器
文件：	总4页 (文件大小：824K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SCC Series

Silicon pressure sensors

0 psi to 5 psi and 0 psi to 300 psi

DESCRIPTION

The SCC Series sensors offer an extremely low cost sensor

element with a temperature stable output when driven with a

constant current source. These integrated circuit sensors

were designed for extremely cost sensitive applications where

precise accuracy over a wide temperature range is not

required. This series is intended for use with non-corrosive,

non-ionic working fluids such as air, and dry gases.

Absolute devices have an internal vacuum reference and an

output voltage proportional to applied pressure. The

differential devices allow application of pressure to either side

of the diaphragm and devices are thereby available to

measure both differential and gage pressures.

This product is packaged either in standard low cost chip

carrier “button” package or a DIP package. Both packages

are designed for applications where the sensing element is to

be integral to the OEM equipment. These packages can be o-

ring sealed, epoxied, and/or clamped onto a pressure fitting.

A closed bridge four pin SIP configuration is provided for

electrical connection to the button package. The DIP package

offers a 5-pin open bridge configuration.

FEATURES

TYPICAL APPLICATIONS

• Low cost sensor element

• Pneumatic controls

• Automotive diagnostics

• Medical equipment

• Dental equipment

• Internal temperature compensation

• Differential or gage pressures

• Environmental controls

ORDERING INFORMATION

Part Number for Ordering

Pressure Range

Sensor in

Button Package

SCC05D

SCC015D

SCC30D

SCC100D

SCC15A

Sensor in

Nipple Package

SCC05DP1

SCC015DP1

SCC30DP1

–

Sensor in

DIP Package

“N” Package

SCC05DN

SCC015DN

SCC30DN

SCC100DN

SCC15AN

SCC30AN

SCC100AN

–

0 psid to 5 psid or psig

0 psid to 15 psid or psig

0 psid to 30 psid or psig

0 psig to 100 psig

0 psia to 15 psia

SCC05GD2, SCC05DD4

SCC15GD2, SCC15DD4

SCC30GD2, SCC30DD4

SCC100GD2, SCC100DD4

SCC15AD2

SCC15AP1

SCC30AP1

–

0 psia to 30 psia

SCC30A

SCC30AD2

0 psia to 100 psia

SCC100A

–

SCC100AD2

0 psia to 300 psi

–

WARNING

MISUSE OF DOCUMENTATION

• The information presented in this product sheet is for

reference only. Do not use this document as a product

installation guide.

WARNING

PERSONAL INJURY

• Complete installation, operation, and maintenance

information is provided in the instructions supplied with

each product.

Failure to comply with these instructions could result in

death or serious injury.

DO NOT USE these products as safety or emergency stop

devices or in any other application where failure of the

product could result in personal injury.

Failure to comply with these instructions could result in

death or serious injury.

SCC Series

SPECIFICATION CHARACTERISTICS (Maximum Ratings for All Devices)

Supply current, I_S

1.5 mA

Compensated temperature range

Operating temperature range

Storage temperature range

Humidity

0 °C to 50 °C [32 °F to 122 °F]

-40 °C to 85 °C [-40 °F to 185 °F]

-55 °C to 125 °C [-67 °F to 257 °F]

0 % to 100 % RH

Lead temperature

250 °C [482 °F] Soldering 2 sec to 4 sec

150 psi

Common-mode pressure

PERFORMANCE CHARACTERISTICS (Individual Models) I_s=1.0 mA, T_A=25 °C [77 °F]⁽¹⁾

Effect ^{(3, 4)}

Effect^{(5, 4)}

on Offset

0 °C to 50 °C

30 µV/°C

40 µV/°C

60 µV/°C

30 µV/°C

90 µV/°C

50 µV/°C

Full-Scale

Span⁽⁶⁾

Part

Operating

Maximum

Over Pressure

20 psi

on Span

0 °C to 50 °C

1.50 %

Number

Pressure Range

0 psid to 5 psid (g)

0 psia to 15 psia

0 psid to 15 psid (g)

0 psid to 30 psid (g)

0 psia to 100 psia

0 psig to 100 psig

0 psia to 300 psia

Accuracy⁽²⁾

0.50 %

SCC05(D,G)

SCC15A

25-65

30 psia

1.50 %

40-95

SCC15(D,G)

SCC30(D,G)

SCC100A

SCC100(D,G)⁽⁷⁾

SCC300A

30 psi

1.50 %

40-95

60 psi

1.50 %

60-150

85-225

50-120

150 psia

150 psig

450 psia

1.50 %

PERFORMANCE SPECIFICATIONS (All Models) I_s=10.0 Ma, T_a=25 °C [77 °F]

Min.

-30.0

–

Typ.

-10.0

0.25

0.10

5.00

Max.

20.0

0.50

–

Unit

Zero Pressure Offset⁽⁸⁾

% FSO

Combined Linearity, Hysteresis and Repeatability⁽²⁾

Long Term Stability of Offset and Span⁽⁹⁾

Response Time (10 % to 90 %)⁽¹⁰⁾

Input Impedance

–

4.00

6.50

kOhm

Output Impedance

Specification Notes:

Note 1: Reference Conditions; Supply Current = 1.0 mA;TA = 25 °C [77 °F], Common-mode Line Pressure = 0 psig, Pressure Applied to P1, unless otherwise noted.

Note 2: Accuracy is the sum of Hysteresis and Linearity. Hysteresis is the maximum output difference at any point within the operating pressure range for increasing and

decreasing pressure. Linearity refers to the best straight line fit as measured for the offset, full-scale and ½ full-scale pressure at 25 °C [77 °F].

Note 3: This is the maximum temperature shift for span when measured between 0 °C and 50 °C [32 °F to 122 °F] relative to the 25 °C [77 °F] reading.Typical

temperature coefficients for span and resistance are -2200 ppm/°C and 2200 ppm/°C respectively.

Note 4: Temperature effect on span and offset are guaranteed by design.Therefore these parameters are not 100 % tested.

Note 5: This is the maximum temperature shift for offset when measured at 0 °C and 50 °C [32 °F to 122 °F] divided by the temperature difference.

Note 6: Span is the algebraic difference between the output voltage at full-scale pressure and the ouput at zero pressure.

Note 7: The SCC100D devices can only be used in a forward gauge mode. Application of more than 30 psig to the back side of any of the SCC Series devices can result

in device failure. On the SCC100GD2 pressure can only be applied to the back side of the die. No pressure I accessible from the front/top side of die.

Note 8: The zero pressure offset is 30 to -20 mV max. form parts SCCxxxGD2 and SCCxxDD4 devices.

Note 9: Maximum difference in output at any pressure with the operating pressure range and temperature within 0 °C and 50 °C [32 °F to 122 °F].

a) 100 temperature cycles, 0 °C and 50 °C [32 °F to 122 °F]

b) 1.0 million pressure cycles, 0 psi to full-scale span.

Note 10: Response time for a 0 psi to full-scale span pressure step change. 10 % to 90 % rise time.

www.honeywell.com/sensing

Silicon pressure sensors

ELECTRICAL CONNECTIONS

(+Vo)

(V )

EQUIVALENT CIRCUITS

MOUNTING DIMENSIONS IN MM (INCHES), FOR REFERENCE ONLY

Button package

OUTPUT

GND

Button, Nipple and “N” Packages

Nipple package

OUTPUT

GND

DIP Packages

N Housing package

Honeywell Sensing and Control

D2 DIP package

DD4 DIP package

AD4 DIP package

WARRANTY/REMEDY

SALES AND SERVICE

Honeywell warrants goods of its

merchantability and fitness for a

Honeywell serves its customers through

a worldwide network of sales offices,

representatives and distributors. For

application assistance, current

specifications, pricing or name of the

nearest Authorized Distributor, contact

your local sales office or:

manufacture as being free of defective

materials and faulty workmanship.

Honeywell’s standard product warranty

applies unless agreed to otherwise by

Honeywell in writing; please refer to

your order acknowledgement or consult

your local sales office for specific

warranty details. If warranted goods are

returned to Honeywell during the period

of coverage, Honeywell will repair or

replace, at its option, without charge

those items it finds defective. The

foregoing is buyer’s sole remedy and

is in lieu of all warranties, expressed

or implied, including those of

par

ticular purpose. In no event shall

Honeywell be liable for

consequential, special, or indirect

damages.

While we provide application

assistance personally, through our

literature and the Honeywell web site, it

is up to the customer to determine the

suitability of the product in the

application.

Specifications may change without

notice. The information we supply is

believed to be accurate and reliable as

of this printing. However, we assume no

responsibility for its use.

E-mail: info.sc@honeywell.com

Internet: www.honeywell.com/sensing

Phone and Fax:

Asia Pacific +65 6355-2828

+65 6445-3033 Fax

Europe

+44 (0) 1698 481481

+44 (0) 1698 481676 Fax

Latin America +1-305-805-8188

+1-305-883-8257 Fax

USA/Canada +1-800-537-6945

+1-815-235-6847

+1-815-235-6545 Fax

Automation and Control Solutions

Sensing and Control

Honeywell

11 West Spring Street

Freeport, Illinois 61032, USA

www.honeywell.com

008135-2-EN IL50 GLO

May 2005

相关型号：