SR16C-J6 [HONEYWELL]
SR16 Series Cost Effective Digital Vane Sensor; Hall-effect technology;twin tower configuration; sinking output; 3.8 to 30 Vdc supply voltage; SR16系列经济高效的数字叶片传感器;霍尔效应技术;双塔配置;下沉输出; 3.8〜 30 VDC电源电压
| 型号： | SR16C-J6 |
| 厂家： | 
Honeywell |
| 描述： | SR16 Series Cost Effective Digital Vane Sensor; Hall-effect technology;twin tower configuration; sinking output; 3.8 to 30 Vdc supply voltage |
| 文件： | 总7页 (文件大小：611K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Interactive Catalog - Honeywell Sensing and Control
Click here for a print friendly version of this datasheet.
SR16C-J6
SR16 Series Cost Effective Digital Vane Sensor; Hall-effect technology;
twin tower configuration; sinking output; 3.8 to 30 Vdc supply voltage
Features
●
●
●
Compact, robust packages
Mechanically interchangeable with our standard optical style sensors
Operated by a “Ferrous Vane” interrupter for pulse counting or position
Representative photograph,
actual product appearance
may vary.
sensing
●
●
●
●
●
●
Current sinking (Open Collector) output
3.8 Vdc to 30 Vdc power supply
Medium level magnetic switching to reduce stray field interference
Internally sealed packages for moderate environment applications
No mechanical contacts; eliminates product wear
Noncontact position sensing
Dimensions
Circuit Block Diagram
Application Interface
Application Drawing
Description
Installation
Instructions
The SR16 Series Hall effect vane sensors are designed for position and speed
sensing and are available in three termination variations. The cost effective SR16
Series sensors are tailored for fitness and information technology applications.
They are well suited for use in moderate electrical, chemical, and mechanical
environments.
Specifications
The SR16 Series sensors contain an internal magnet and Hall effect sensor
mounted in a twin tower configuration. In application, a customer supplied
ferrous target passes between the tower gap, interrupts the magnetic field, and
switches the digital state of the sensor.
These robust solid state Hall effect sensors are housed in an environmentally
sealed plastic package. The Hall effect sensors provide highly accurate and
repeatable performance in environments in which dirt, dust, or stray IR light
might affect the performance of optical solutions. The sensor package is
constructed of rugged polyphthalamide material and is mechanically
interchangeable with our standard optical sensors.
Product Specifications
Competitively Priced Hall Digital Vane Sensor
Dual Tower wire exit
Product Type
Package Style
Supply Voltage
Output Type
3.8 Vdc to 30.0 Vdc
Sink
Termination Type
26-gauge 7-strand lead wire
Operating Temperature Range
Output Voltage
Vibration
-20 °C to 85 °C [-4 °F to 185 °F]
0.4 Vdc max.
10 g/10 Hz to 500 Hz
Humidity
95 %RH/40 °C 100 h
Vane and Geartooth Target
Material
Low Carbon Steel, High Permeability, Low Residual Induction
http://catalog.sensing.honeywell.com/datasheet.asp?PN=SR16C-J6&FAM=solidstate (2 of 3)17/11/2005 11:44:23
Interactive Catalog - Honeywell Sensing and Control
Sealing
Sealed SS4 package
Global
Availability
Comment
For minimum tooth measurement, reference recommended
target on drawing.
Supply Current (max. @ 25 °C)
Output Current (max.)
Vane Thickness
10 mA
40 mA
1,14 mm [0.045 in]
6,35 mm [0.250 in]
SR16 Series
Minimum Tooth Depth
Series Name
Due to regional agency approval requirements, some products may not be available in your area.
Please contact your regional Honeywell office regarding your product of choice.
http://catalog.sensing.honeywell.com/datasheet.asp?PN=SR16C-J6&FAM=solidstate (3 of 3)17/11/2005 11:44:23
Solid State Sensors
SR16/17 Hall Effect Vane Sensors
SR 16/17 Series
FEATURES
•= Compact, robust packages
•= Mechanically
interchangeable with our
standard optical style
sensors
•= Operated by a “Ferrous
Vane” interrupter for pulse
counting or position
sensing
•= Current sinking (Open
Collector) output
•= 3.8 to 30 VDC power
supply
•= Medium level magnetic
switching to reduce stray
field interference
•= Internally sealed packages
for moderate environment
applications
•= No mechanical contacts;
eliminates product wear
•= Noncontact position
sensing
The SR16/17 Series Hall effect vane sensors, designed for position and
speed sensing, offer side mount packages and three termination variations.
The cost effective SR16/17 Series sensors are tailored for fitness and
information technology applications. They are well suited for use in
moderate electrical, chemical, and mechanical environments.
The SR16/17 Series sensors contain an internal magnet and Hall effect
sensor mounted in a twin tower configuration. In application, a customer
supplied ferrous target passes between the tower gap, interrupts the
magnetic field, and switches the digital state of the sensor.
These robust solid state Hall effect sensors are housed in an
environmentally sealed plastic package. The Hall effect sensors provide
highly accurate and repeatable performance in environments in which dirt,
dust, or stray IR light might affect the performance of optical solutions. The
sensor package is constructed of rugged polyphthalamide and
polycarbonate material and is mechanically interchangeable with our
standard optical sensors.
WARNING
PERSONAL INJURY
•= DO NOT USE these
products as safety or
emergency stop devices, or
in any other application
where failure of the product
could result in personal
injury.
WARNING
MISUSE OF DOCUMENTATION
•= The information presented in this product sheet is for reference only.
Do not use this document as product installation information.
•= Complete installation, operation, and maintenance information is
provided in the instructions supplied with each product.
Failure to comply with these instructions could result in death or serious
injury.
Failure to comply with these
instructions could result in
death or serious injury.
Sensing and Control
Solid State Sensors
SR16/17 Series
SR16/17 Hall Effect Vane Sensors
ELECTRICAL CHARACTERISTICS –20°C TO 85 °C, 3.8 TO 30 VDC
Min.
Max.
3.8 to 30
9
Remarks
Supply voltage
VDC
Current consumption
mA (off) 10 mA (on)
Sinking 20 mA max.
mA
Output voltage (operated)
Sink current (operated)
Output leakage current (released)
0.40 V
20
VOUT = 30 VDC, VCC = 24 VDC
10 µA
Output switching time
Rise, 10 to 90%
1.5 µs
1.5 µs
V
CC = 12 V, RL = 1.6 KΩ, CL = 20 pF
CC = 12 V, RL = 1.6 KΩ, CL = 20 pF
Fall, 90 to 10%
V
Operating Temperature
-20°C to +85°C (-4°F to +185°F)
MECHANICAL CHARACTERISTICS
Operating Range 12 VDC @ 25ÛC
Operate
1.5° Ù 2.0Û
Release
3.0° Ù 2.5Û
CONDITIONS
Target engagement distance 0.150 in to 0.300 in
RPMs 0 to 5000
Slot depth 0.250 in min.
BLOCK CIRCUIT WIRING DIAGRAM
SPEED SENSING INTERFACE
Vs (+)
Vcc
Vcc +5
High
Impedance
Input
TRIGGER
OUTPUT
(O) N. H.
Ground Black (
)
HALL
SENSOR
CIRCUIT
AND
10 K Ohm
Vcc Red (+)
AMPLIFIER
100 Ohm
100 Ohm
100 pF Capacitor
GROUND (-)
Input Green(O)
MOUNTING DIMENSIONS (for reference only) mm/in
SR16/17 Series Vane Sensors
SR16C-J4
2 Honeywell • Sensing and Control
For application help: call 1-800-537-6945
Solid State Sensors
SR16/17 Series
SR16/17 Hall Effect Vane Sensors
MOUNTING DIMENSIONS (for reference only) mm/in
SR16/17 Series Vane Sensors
SR16C-J6
SR16C-N
SR17C-J6
Notes:
1. Mounting specification: non-ferrous #4 machine head screws with .25 OD washers torqued to 3-5 in-lbs.
2. Suggested target configuration, material: .045 low carbon steel, high permeability, low residual induction.
3. Operate (degrees) is the angular distance from the leading edge of the tooth to the centerline of the sensor.
4. Release (degrees) is the angular distance from the trailing edge of the tooth to the centerline of the sensor.
5. Operating specification is based on target shown.
For application help: call 1-800-537-6945
Honeywell • Sensing and Control 3
Solid State Sensors
SR16/17 Series
SR16/17 Hall Effect Vane Sensors
WARRANTY/REMEDY
Specifications may change
without notice. The information
we supply is believed to be
For application assistance,
current specifications, or name of
the nearest Authorized
Distributor, contact a nearby
sales office. Or call:
1-800-537-6945 USA
1-800-737-3360 Canada
1-815-235-6847 International
FAX
1-815-235-6545 USA
INTERNET
www.honeywell.com/sensing
info.sc@honeywell.com
Honeywell warrants goods of
its manufacture as being free of
defective materials and faulty
workmanship. Contact your local
sales office for warranty
information. If warranted goods
are returned to Honeywell during
the period of coverage,
Honeywell will repair or replace
without charge those items it
finds defective. The foregoing is
Buyer’s sole remedy and is in
lieu of all other warranties,
expressed or implied,
accurate and reliable as of this
printing. However, we assume
no responsibility for its use.
While we provide application
assistance personally, through
our literature and the Honeywell
web site, it is up to the customer
to determine the suitability of the
product in the application.
including those of
merchantability and fitness for
a particular purpose.
Sensing and Control
Honeywell
11 West Spring Street
Freeport, Illinois 61032
www.honeywell.com/sensing
Printed with Soy Ink
on 50% Recycled Paper
005844-1-EN IL50 GLO 0300 Printed in USA
http://catalog.sensing.honeywell.com/Author/Images/honeywell/ss/Sr16-j6-DIM.gif
http://catalog.sensing.honeywell.com/Author/Images/honeywell/ss/Sr16-j6-DIM.gif17/11/2005 11:45:20
相关型号：
SR16L190FB14
RESISTOR, CURRENT SENSE, WIRE WOUND, 1 W, 1 %, 175 ppm, 0.00619 ohm, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
SR16L190FE14
RESISTOR, CURRENT SENSE, WIRE WOUND, 1 W, 1 %, 175 ppm, 0.00619 ohm, THROUGH HOLE MOUNT, RADIAL LEADED, GREEN
VISHAY
©2020 ICPDF网 联系我们和版权申明