SS495A1-F [HONEYWELL]

Analog Circuit, 1 Func, PSIP3, SIP-3;


型号：	SS495A1-F
厂家：	Honeywell
描述：	Analog Circuit, 1 Func, PSIP3, SIP-3
文件：	总5页 (文件大小：409K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Installation Instructions for the

SS490 Series Miniature Ratiometric

Linear Hall-Effect Sensor ICs

PK 88840

Issue 6

SOLDERING INSTRUCTIONS

Table 1. Absolute Maximum Ratings

Characteristic

Parameter

-0.5 Vdc to 11 Vdc

10 mA

NOTICE

Supply voltage (Vs)

Do not wave solder surface mount sensor ICs (catalog listings

with sufﬁxes -S or -SP). Wave soldering may negatively affect

sensor performance and reliability, and will void Honeywell’s

warranty.

Output current

Operating temperature

Storage temperature

-40 °C to 150 °C [-40 °F to 302 °C]

-55 °C to 165 °C [-67 °F to 32ꢀ °C]

no limit - circuit cannot be damaged by

magnetic overdrive

Surface mount (catalog listings with sufﬁxes -S or -SP): Use

infrared reﬂow process with active ﬂux, lead-free solder. Do not

exceed peak temperature of 245 °C [473 °F] for a maximum of 10

seconds.

Magnetic flux

NOTICE

Absolute maximum ratings are the extreme limits that the device

will withstand without damage to the device. However, the

electrical and mechanical characteristics are not guaranteed as

the maximum limits (above recommended operating conditions)

are approached, nor will the device necessarily operate at

absolute maximum ratings.

Through-hole leads: Wave solder at 250 °C to 260 °C [482 °F to

500 °F] for a maximum of 3 seconds. Burrs are allowed only if full

length of leads will pass through hole.

CLEANING INSTRUCTIONS

CAUTION

PRODUCT DAMAGE

Use agitated rinse, not pressure wash, in order to avoid forcing

contamninats into the sensor package.

Failure to comply with these instructions may result in

product damage.

Table 2. Specifications (Vs = 5.0 Vdc, Ta = -40 °C to 125 °C [-40 °F to 257 °F] unless otherwise noted.)

Catalog Listing Preﬁx

Characteristic

Condition

Unit

SS494A SS495A1 SS495A2 SS495B

SS496A SS496A1 SS496B

Supply voltage

—

4.5 to 10.5

Vdc

Supply current:

typical

maximum

at 25 °C

7.0

8.7

ratiometric

—

Output type (sink or source)

—

Output current:

typical (sink or source)

minimum (source)

minimum (sink)

Vs > 4.5 V

Vs > 5.0 V

1.5

1.0

0.6

1.0

minimum (sink)

Operating temperature

Magnetic range:

typical

minimum

Output voltage span:

typical

—

-40 to 150 [-40 to 302]

°C [°F]

Gauss

670

600

670

600

670 670 840

840

750

840

750

600

750

0.2 to (Vs-0.2)

0.4 to (Vs-0.4)

maximum

output at 0

Gauss

2.50

0.075

2.50

0.075

2.50

0.100

2.50

0.150

2.50

0.075

2.50

0.075

2.50

0.150

Null

3.125

0.125

3.125

0.0ꢀ4

3.125

0.156

3.125

0.250

2.50

0.100

2.50

0.075

2.50

0.200

Sensitivity

—

mV/G

Linearity:

typical

maximum

Temperature error:

Null drift

Sensitivity drift

—

-1.0

-1.5

% Span

%/°C

—

>25 °C

<25 °C

0.06

0.04

0.07

0.08

0.048

0.03

0.06

-0.01, +0.05 -0.02, +0.06 -0.02, +0.06 -0.01, +0.05 -0.01, +0.05 -0.01, +0.05 -0.02, +0.06

-0.0, +0.06 -0.0, +0.06 -0.01, +0.07 -0.02, +0.06 -0.0, +0.06 -0.0, +0.06 -0.02, +0.06

SS490 Series Miniature Ratiometric

Linear Hall-Effect Sensor ICs

ISSUE 6

PK 88840

Figure 1. Block/Electrical Diagram

Vs (+)

Ampliꢀer

Hall Sensor

Output (0)

Vs (-)

Figure 2. Typical Ouptut vs Gauss (Vs = 5.0 Vdc)

All Catalog Listings Beginning with SS496

All Catalog Listings Beginning with SS495

4.5

2.5

4.5

2.5

0.5

-640

-320

320

640

-800

-400

400

800

Gauss (G)

Figure 3. Maximum Allowable Ambient Temperature

10.5

5.5

4.5

Acceptable operating region

125

Ambient Temperature (°C)

150

Honeywell Sensing and Control

SS490 Series Miniature Ratiometric

Linear Hall-Effect Sensor ICs

ISSUE 6

PK 88840

Table 3. Suffix Nomenclature for the SS4 Package:

Sufﬁx

-Blank

-T3

Description

Sufﬁx

Description

14,ꢀꢀ mm [0.5ꢀ0 in] straight standard leads, bulk pack

-S

3,30 [0.130 in] surface mount, bulk pack

3,30 [0.130 in] surface mount, pocket tape and reel

18,67 mm [0.735 in] straight long leads, bulk pack

14,ꢀꢀ mm [0.5ꢀ0 in] straight standard leads, ammo pack tape in box -SP

-F

14,ꢀꢀ mm [0.5ꢀ0 in] formed leads, bulk pack

-L

-T2

14,ꢀꢀ mm [0.5ꢀ0 in] formed leads, ammo pack tape in box

Figure 4. Dimensional Drawings for Catalog Listings with Suffixes -Blank and -T3 (For Reference Only: mm/[in].)

-Blank (Straight Standard Leads)

-T3 (Straight Standard Leads on Ammo Pack Tape)

ADHESIVE TAPE

0,5± MAX.

[0.020]

0,46

2,54

[0.018]

[0.100]

0,89 MAX.

[0.035]

1,57 0,051

8,ꢀꢀ +0,762, -0,5±0

22,35

[0.880]

4,06 0,051

[0.354 +0.030, -0.020]

[0.160 0.002]

[0.062 0.002]

5,ꢀ7

[0.235]

2,98 0,051

[0.118 0.002]

2,77

[0.109]

N S

1,75 0,051

[0.069 0.010]

±8,00ꢀ +0,ꢀꢀ±, -0,5±0

[0.70ꢀ +0.03ꢀ, -0.020]

3X 0,76

[0.030]

14,99

[0.590]

±,27 +0,38±, -0,±02

[0.050 +0.0±5, -0.004]

6,35 ±±,2ꢀ5

[0.250 ±0.05±]

±2,7 ±0,305

[0.±57 ±0.0±2]

±2,7 ±0,305

[0.500 ±0.0±2]

3X 0,38

[0.015]

3X 0,64 MAX.

[0.025]

0,76 0,076

[0.030 0.003]

3X 0,38

[0.015]

2X 1,3

[0.050]

SENSOR 24

SENSOR 1

FOLD

Figure 5. Dimensional Drawings for Catalog Listings with Suffixes -F and -T2 (For Reference Only: mm/[in].)

-T2 (Formed Leads on Ammo Pack Tape)

-F (Formed Leads)

ADHESIVE TAPE

0,46

2,54

0,51 MAX.

[0.020]

[0.018]

[0.100]

0,89 MAX.

[0.035]

1,57 0,051

8,99 +0,762, -0,510

[0.354 +0.030, -0.020]

4,06 0,051

[0.160 0.002]

22,35

[0.880]

[0.062 0.002]

2,98 0,051

2,77

16,00 1,295

[0.630 0.051]

5,97

[0.235]

N S

[0.118 0.002]

1,75 0,051

[0.069 0.010]

[0.109]

18,009 +0,991, -0,510

[0.709 +0.039, -0.020]

14,99

[0.590]

6,35 1,295

2,54 +0,381, -0,102

[0.250 0.051]

[0.100 +0.015, -0.004]

12,7 0,305

[0.157 0.012]

12,7 0,305

[0.500 0.012]

3X 0,38

[0.015]

2X 2,54

[0.100]

3X 0,38

[0.015]

0,76 0,076

[0.030 0.003]

SENSOR 1

SENSOR 24

FOLD

Honeywell Sensing and Control

SS490 Series Miniature Ratiometric

Linear Hall-Effect Sensor ICs

ISSUE 6

PK 88840

Figure 6. Dimensional Drawings for Catalog Listings with Suffixes -S and -SP (For Reference Only: mm/[in].)

-S (Surface Mount)

0,46

[0.018]

2,54

[0.100]

0,89 MAX.

[0.035]

4,06 0,051

[0.160 0.002]

1,57 0,051

[0.062 0.002]

2,98 0,051

[0.118 0.002]

2,77

N S

1,75 0,051

[0.069 0.010]

[0.109]

1,52 0,254

[0.060 0.010]

3X 0,38 0,127, -0.051

[0.015 +0.005, -0.002]

3,18 0.38

[0.125 0.015]

3X 0,76

[0.030]

3X 0,64 MAX.

[0.025]

3X 0,38

[0.015]

3X 0,38 0,051]

[0.015 0.002]

2X 1,3

[0.050]

-SP (Surface Mount on Pocket Tape and Reel)

(not to scale)

3X 1,499 MIN.

[0.059]

3,99 0,102

[0.157 0.004]

2,01 0,051

[0.079 0.002]

EMBOSSMENT

33,02 0,787

[1.300 0.031]

2,41 MAX.

[0.095]

1,75 0,102

[0.069 0.004]

0,406 MAX.

[0.016]

178.05 2,032

[7.01 0.08]

TOP COVER TAPE

0,102 MAX.

[0.004]

5,51 0,051

[0.217 0.002]

14,99 0,102, -0.00

[0.059 +0.004, -0.000]

7, 11 MAX.

[0.280]

11,99 0,051

[0.472 0.002]

1,70

[0.067]

4,42

[0.174]

6,60

[0.260]

8,00 0,102

[0.315 0.004]

DIRECTION OF FEED FROM REEL

Figure 7. Dimensional Drawings for Catalog Listings with Suffix -L (For Reference Only: mm/[in].)

-L (Straight Long Leads)

4,06 0,051

[0.160 0.002]

1,57 0,051

[0.062 0.002]

2,54

[0.100]

0,762 0,051

[0.030 0.002]

2,98 0,051

[0.118 0.002]

1,83 0,152

[0.072 0.006]

18,67

[0.735]

3X 0,38

[0.015]

3X 0,38

[0.015]

2X 1,3

[0.050]

2X 1,3

[0.050]

Honeywell Sensing and Control

SS490 Series Miniature Ratiometric

Linear Hall-Effect Sensor ICs

ISSUE 6

PK 88840

SALES AND SERVICE

Honeywell serves its customers through a worldwide network

of sales ofﬁces, representatives and distributors. For application

assistance, current speciﬁcations, pricing or name of the nearest

Authorized Distributor, contact your local sales ofﬁce or:

WARNING

PERSONAL INJURY

DO NOT USE these products as safety or emergency stop

devices or in any other application where failure of the product

could result in personal injury.

E-mail: info.sc@honeywell.com

Internet: honeywell.com

Phone and Fax:

Failure to comply with these instructions could result in

death or serious injury.

Asia Paciﬁc

+65 6355-2828

+65 6445-3033 Fax

+44 (0) 1698 481481

+44 (0) 1698 481676 Fax

+1-305-805-8188

+1-305-883-8257 Fax

+1-800-537-6945

WARRANTY

Europe

Honeywell warrants goods of its manufacture as being free of

defective materials and faulty workmanship. Honeywell’s standard

product warranty applies unless agreed to otherwise by Honeywell

in writing; please refer to your order acknowledgement or consult

your local sales ofﬁce for speciﬁc warranty details. If warranted

goods are returned to Honeywell during the period of coverage,

Honeywell will repair or replace, at its option, without charge those

items it ﬁnds defective. The foregoing is buyer’s sole remedy

and is in lieu of all warranties, expressed or implied, including

those of merchantability and ﬁtness for a particular purpose.

In no event shall Honeywell be liable for consequential,

special, or indirect damages.

Latin America

USA/Canada

+1-815-235-6847

+1-815-235-6545 Fax

While we provide application assistance personally, through our

literature and the Honeywell web site, it is up to the customer to

determine the suitability of the product in the application.

Speciﬁcations may change without notice. The information we

supply is believed to be accurate and reliable as of this printing.

However, we assume no responsibility for its use.

Sensing and Control

Honeywell

1985 Douglas Drive North

Golden Valley, MN 55422

PK 88840-6-EN

February 2014

honeywell.com

SS495A1-F [HONEYWELL]

相关型号：

UL1042

ZXFV201

ZXFV201N14

ZXFV201N14TA

ZXFV201N14TC

ZXFV202E5

ZXFV202N8

ZXFV203N14

ZXFV301N16(1)

ZXFV302N16

ZXFV4089

ZXFV4089N8