SS513AT [HONEYWELL]

Surface Mount Sensors; 表面贴装传感器


型号：	SS513AT
厂家：	Honeywell
描述：	Surface Mount Sensors 表面贴装传感器传感器换能器磁场传感器
文件：	总4页 (文件大小：155K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Hall Effect Products

Surface Mount Sensors

SS5 Series

FEATURES/BENEFITS

• Wide temperature and

voltage ranges for design

flexibility and harsh

(automotive)environments.

• Temperature compensated

for consistent operation with

low-cost magnets (SS500).

• SS5 Package is resistant to

thermal and mechanical

stress.

• SS5 profile is lower than

other SOT-89 packages.

This allows the customer to

reduce the total gap.

• Industry standard "gull-wing"

design. Less susceptibility to

"solder bridging". Allows

increased circuit board

density.

SS5 Series Hall effect position sensors are operated by the magnetic

field from a permanent magnet or electromagnet. The small SOT89 style

package surface mounts on PC boards and flexible circuits. The SS5 uses

a industry standard "gull-wing" design which makes it less susceptible to

"solder bridging" and allows increased circuit board density. The SS5

series package can accommodate larger IC’s than SS1 and allows for four-

pin designs

The integrated circuits are designed to provide predictable performance

over the full temperature range of -40 to +150°C. Bipolar, unipolar and

latching magnetics are available. The SS5 has the same footprint and pin-

out as the industry standard SOT-89. It will replace Honeywell SS1 Series

and any equivalent SOT-89 sensors from other suppliers with minimum or

no design changes.

On-board regulation provides extremely stable operation over the full

supply voltage range of 4.5 to 24 VDC(SS51T) or 3.8 to 30 VDC(SS500).

Current consumption is a low 10 mA maximum at 40°C and is typically

7mA or less at room temperature and above. SS5 sensors are capable of

continuous 20 mA sinking output, and can withstand temporary current as

high as 20 mA maximum (SS51T) or 50 mA maximum (SS500). They can

use existing power supply sources in most applications, and can be directly

interfaced with many electronic components without buffering or

compensation circuitry.

SS5 Series sensors are supplied on tape and reel for high-volume,

automated pick and place equipment. Each reel contains 1,000 sensors.

MICRO SWITCH supplies bar and ring magnets for operating Hall effect

sensors. Bar magnets can operate any Hall effect sensor. Ring magnets

are magnetized on the outside diameter with alternating North and South

poles. They are particularly useful with bipolar sensors and rpm

measurement.

• Bipolar, unipolar and latching

magnetics.

• Low Gauss versions

available for high accuracy

or wide gap applications.

• SS5 package allows 4-pin

package designs

TYPICAL APPLICATIONS

• Brushless DC motors

• Digital current sensor

• Anti-skid braking sensor

• Piston detection in hydraulic

cylinder

• Valve position sensing

• Cam, lever, shaft position

sensing

• Tachometer, counter pickup

• Push-button sensor

• Disk speed, tape rotation,

flow rate sensing

• Speed sensing - rate, under,

over speed

• Remote reading sensor

• Magnetic card reader

MICRO SWITCH Sensing and Control

Hall Effect Products

SS5 Series

Surface Mount Sensors

WIRING DIAGRAMS

ABSOLUTE MAXIMUM RATINGS

Catalog Listing

SS51T

SS500

Supply Voltage

-28 to +28 VDC

-1 to +30 VDC

Voltage externally

applied to output

+28 VDC max. (OFF

condition only)

+30 VDC max. (OFF

condition only)

-0.5 VDC min. (OFF or ON

condition)

Output ON Current

Temperature Limits

20 mA max.

50 mA max.

Operating -40 to +150°C (-40 to

+302°F)

-50 to +160°C (-46 to

+320°F)

Storage -40 to +150°C (-40 to

+302°F)

-65 to +160°C (-54 to

+320°F

Magnetic Flux

No limit. Circuit cannot be

damaged by magnetic

overdrive.

No limit. Circuit cannot be

damaged by magnetic

overdrive.

Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent

damage to the device. This is a stress rating only and functional operation of the device at

these or any other conditions above those indicated in the operations section for extended

periods of time may affect reliability.

OPERATING CHARACTERISTICS

SS51T

SS500

Remarks

Supply Voltage

4.5 to 24 VDC

10 mA

3.8 to 30 VDC

10 mA

Current Consumption (Ioff)

Output Voltage (operated)

Max over temp

Sinking 20 mA

max.

0.4 V

Output Current (operated)

20 mA

20mA

10 µA

10µA

Output Leakage Current

Output Switching Time

V_CC= 12 V,

1.5 µs

Rise, 10 to 90%

Fall, 90 to 10%

R_L= 1.6 K Ohm,

C_L= 20 pF

Operating Temperature; °C

-40 to +150°C

2 Honeywell • MICRO SWITCH Sensing and Control

For application help: call 1-800-537-6945

Hall Effect Products

SS5 Series

Surface Mount Sensors

MAGNETIC CHARACTERISTICS

Catalog Listing

Magnetic Type

SS51T SS511AT SS513AT SS541AT SS543AT SS549AT SS561AT

SS566AT

Bipolar

Bipolar Unipolar Unipolar Unipolar Latching

Latching

Magnetic Characteristics (Gauss)

-40°C

Max. Op.

Min. Rel.

Min. Dif.

145

-145

-70

140

-140

135

215

440

210

110

-110

200

-200

200

0°C

Max. Op.

Min. Rel.

Min. Dif.

145

-145

-65

140

-140

117

190

400

230

-90

185

-185

200

25°C

85°C

Max. Op.

Min. Rel.

Min. Dif.

140

-140

-60

140

-140

115

180

390

235

-85

180

-180

200

Max. Op.

Min. Rel.

Min. Dif.

150

-150

-60

140

-140

120

180

400

215

-85

180

-180

190

125°C Max. Op.

Min. Rel.

200

-200

-65

140

-140

123

190

410

200

100

-100

180

-180

160

Min. Dif.

150°C Max. Op.

Min. Rel.

250

-250

-70

140

-140

125

200

420

185

110

-110

185

-185

140

Min. Dif.

OPERATE AND RELEASE POINTS

SS51T

SS511AT

SS543AT

SS513AT

SS549AT

SS541AT

SS561AT

SS566AT

For application help: call 1-800-537-6945

Honeywell • MICRO SWITCH Sensing and Control 3

Hall Effect Products

SS5 Series

Surface Mount Sensors

WARRANTY/REMEDY

MOUNTING DIMENSIONS

Honeywell warrants goods of its manufacture as

being free of defective materials and faulty

workmanship. Contact your local sales office for

warranty information. If warranted goods are

returned to Honeywell during the period of coverage,

Honeywell will repair or replace without charge those

items it finds defective. The foregoing is Buyer’s sole

remedy and is in lieu of all other warranties,

expressed or implied, including those of

merchantability and fitness for a particular

purpose.

Specifications may change without notice. The

information we supply is believed to be accurate and

reliable as of this printing. However, we assume no

responsibility for its use.

While we provide application assistance

personally, through our literature and the Honeywell

web site, it is up to the customer to determine the

suitability of the product in the application.

For application assistance, current specifications,

pricing or name of the nearest Authorized

Distributor, contact a nearby sales office. Or call:

TAPE DIMENSIONS

1-800-537-6945 USA

1-800-737-3360 Canada

1-815-235-6847 International

REEL DIMENSIONS

FAX

1-815-235-6545 USA

INTERNET

www.honeywell.com/sensing

info@micro.honeywell.com

MICRO SWITCH

Sensing and Control

Honeywell Inc.

11 West Spring Street

Freeport, Illinois 61032

www.honeywell.com/sensing

Printed with Soy Ink

on 50% Recycled Paper

005841-1-EN IL50 GLO 599 Printed in USA

相关型号：