SSCSANN060MD7A5_技术文档

These sensors measure absolute, differential, and gage

pressures. The absolute versions have an internal vacuum

reference and an output value proportional to absolute

pressure. Differential versions allow application of pressure to

either side of the sensing diaphragm. Gage versions are

referenced to atmospheric pressure and provide an output

proportional to pressure variations from atmosphere.

DESCRIPTION

The TruStability Standard Accuracy Silicon Ceramic (SSC)

Series is a piezoresistive silicon pressure sensor offering a

digital output for reading pressure over the specified full scale

pressure span and temperature range.

The SSC Series is fully calibrated and temperature

compensated for sensor offset, sensitivity, temperature effects,

and non-linearity using an on-board Application Specific

Integrated Circuit (ASIC). Calibrated output values for pressure

are updated at approximately 2 kHz.

The TruStability^®pressure sensors are intended for use with

non-corrosive, non-ionic gases, such as air and other dry

gases. An available option extends the performance of these

sensors to non-corrosive, non-ionic liquids.

The SSC Series is calibrated over the temperature range of

-20 C to 85 C [-4 F to 185 F]. The sensor is characterized

for operation from a single power supply of either 3.3 Vdc or

5.0 Vdc.

All products are designed and manufactured according to ISO

9001 standards.

FEATURES

Industry-leading long-term stability

Extremely tight accuracy of 0.25% FSS BFSL (Full Scale

Span Best Fit Straight Line)

Precision ASIC conditioning and temperature compensated

over -20 C to 85 C [-4 F to 185 F] temperature range

RoHS compliant

Total error band of 2% full scale span maximum

Modular and flexible design offers customers a variety of

package styles and options, all with the same industry-

leading performance specifications

Miniature 10 mm x 10 mm [0.39 in x 0.39 in] package

Low operating voltage

Virtually insensitive to mounting orientation

Internal diagnostic functions increase system reliability

Also available with analog output

Absolute, differential, and gage types

Pressure ranges from 1 psi to 150 psi (60 mbar to 10 bar)

Custom calibration available

Extremely low power consumption

Various pressure port options

Liquid media option

I²C- or SPI- compatible 14-bit digital output (min. 12-bit

sensor resolution)

POTENTIAL APPLICATIONS

Medical:

Industrial:

-

Airflow monitors

-

Barometry

Anesthesia machines

Blood analysis machines

Gas chromatography

Gas flow instrumentation

Kidney dialysis machines

Oxygen concentrators

Pneumatic controls

Respiratory machines

Sleep apnea equipment

Ventilators

Flow calibrators

Gas chromatography

Gas flow instrumentation

HVAC

Life sciences

Pneumatic controls

Table 1. Absolute Maximum Ratings¹

Parameter

Min.

-0.3

Max.

6.0

Unit

Vdc

V

Supply voltage (Vsupply)

Voltage on any pin

Digital interface clock frequency:

I²C

Vsupply + 0.3

100

50

400

800

kHz

SPI

ESD susceptibility (human body model)

Storage temperature

Soldering time and temperature:

Lead solder (SIP, DIP)

Peak reflow (SMT)

3

kV

-40 [-40]

85 [185]

C [ F]

4 s max. at 250 °C [482 °F]

15 s max. at 250 °C [482 °F]

Table 2. Operating Specifications

Parameter

Min.

Typ.

Max.

Unit

Supply voltage (Vsupply)²:

3.3 Vdc

3.0

4.75

3.3³

5.0³

3.6

5.25

Vdc

5.0 Vdc

Sensors are either 3.3 Vdc or 5.0 Vdc based on listing selected.

Supply current:

3.3 Vdc supply

5.0 Vdc supply

1.6

2

2.1

3

mA

-

Compensated temperature range⁴

Operating temperature range⁵

Startup time (power up to data ready)

Response time

-20 [-4]

-40 [-40]

85 [185]

7.3

C [ F]

ms

2.8

0.46

ms

I²C voltage level low

I²C voltage level high

Pull up on SDA and SCL

Accuracy⁶

-

0.8

1

-

0.2

Vsupply

kOhm

%FSS BFSL

%FSS⁸

bits

-

0.25

2

Total error band⁷

Output resolution

12

2

www.honeywell.com/sensing

Table 3. Environmental Specifications

Parameter

Characteristic

Humidity:

Dry gases only (See “Options N and D” in Figure 1.)

Liquid media (See “Options T and V” in Figure 1.)

0% to 95% RH, non-condensing

100% condensing or direct liquid media on Port 1

MIL-STD-202F, Curve AK (20.7 g random)

MIL-STD-202F, Method 213B, Condition F

1 million cycles minimum

Vibration

Shock

Life⁹

Solder reflow

J-STD-020-C

Table 4. Wetted Materials¹⁰

Parameter

Covers

Port 1 (Pressure Port)

high temperature polyamide

alumina ceramic

Port 2 (Reference Port)

high temperature polyamide

alumina ceramic

Substrate

Adhesives

epoxy, silicone

Electronic components

Notes:

ceramic, glass, solder, silicon

silicon, glass, gold, solder

1. Absolute maximum ratings are the extreme limits the device will withstand without damage.

2. Ratiometricity of the sensor (the ability of the digital device to maintain performance parameters independent of supply voltage) is achieved

within the specified operating voltage for each option.

3. The sensor is not reverse polarity protected. Incorrect application of supply voltage or ground to the wrong pin may cause electrical failure.

4. The compensated temperature range is the temperature range over which the sensor will produce an output proportional to pressure within

the specified performance limits.

5. The operating temperature range is the temperature range over which the sensor will produce an output proportional to pressure but may not

remain within the specified performance limits.

6. Accuracy: The maximum deviation in output from a Best Fit Straight Line (BFSL) fitted to the output measured over the pressure range at

25 °C [77 °F]. Includes all errors due to pressure non-linearity, pressure hysteresis, and non-repeatability.

7. Total Error Band: The maximum deviation from the ideal transfer function over the entire compensated temperature and pressure range.

Includes all errors due to offset, full scale span, pressure non-linearity, pressure hysteresis, repeatability, thermal effect on offset, thermal

effect on span, and thermal hysteresis.

8. Full Scale Span (FSS) is the algebraic difference between the output signal measured at the maximum (Pmax.) and minimum (Pmin.) limits of

the pressure range. (See Figure 1 for ranges.)

9. Life may vary depending on specific application in which sensor is utilized.

10. Contact Honeywell Customer Service for detailed material information.

CAUTION

PRODUCT DAMAGE

Ensure liquid media is applied to Port 1 only; Port 2 is not compatible with liquids.

Ensure liquid media contains no particulates. All TruStability^®sensors are dead-ended devices. Particulates can accumulate

inside the sensor, causing damage or affecting sensor output.

Recommend that the sensor be positioned with Port 1 facing downwards; any particulates in the system are less likely to

enter and settle within the pressure sensor if it is in this position.

Ensure liquid media does not create a residue when dried; build-up inside the sensor may affect sensor output. Rinsing of a

dead-ended sensor is difficult and has limited effectiveness for removing residue.

Ensure liquid media are compatible with wetted materials. Non-compatible liquid media will degrade sensor performance and

may lead to sensor failure.

Failure to comply with these instructions may result in product damage.

Honeywell Sensing and Control

3

Figure 1. Nomenclature and Order Guide

_

_ _ _ _ _ _ _ _

_

A

SSC

Supply Voltage

3 = 3.3 Vdc

Series

5 = 5.0 Vdc

Package

D = DIP (Dual Inline Pin)

M = SMT (Surface Mount Technology)

S = SIP (Single Inline Pin)

Transfer Function¹¹

A = 10% to 90% of Vsupply

Output Type¹²

S = SPI (not available in SIP package)

2 = I²C, Address 0x28

3 = I²C, Address 0x38

4 = I²C, Address 0x48

5 = I²C, Address 0x58

6 = I²C, Address 0x68

7 = I²C, Address 0x78

Pressure Port (* indicates not available)

SMT

DIP

SIP

NN = No ports

Pressure Range^{13, 14}

AA = Dual axial

barbed ports,

opposite sides

*

1 psi to 150 psi

60 mbar to 10 bar

Absolute

AN = Single

axial barbed

port

AN = Single

axial barbed

port

AN = Single

axial barbed

port

015PA = 0 psi to 15 psi

030PA = 0 psi to 30 psi

060PA = 0 psi to 60 psi

100PA = 0 psi to 100 psi

150PA = 0 psi to 150 psi

Absolute

001BA = 0 bar to 1 bar

1.6BA = 0 bar to 1.6 bar

2.5BA = 0 bar to 2.5 bar

004BA = 0 bar to 4 bar

006BA = 0 bar to 6 bar

010BA = 0 bar to 10 bar

LN = Single

axial barbless

port

LN = Single

axial barbless

port

LN = Single

axial barbless

port

Differential

001PD = ±1 psi

005PD = ±5 psi

015PD = ±15 psi

030PD = ±30 psi

060PD = ±60 psi

FF = Fastener

mount, dual axial

barbed ports,

opposite sides

Differential

060MD = ±60 mbar

100MD = ±100 mbar

160MD = ±160 mbar

250MD = ±250 mbar

400MD = ±400 mbar

600MD = ±600 mbar

001BD = ±1 bar

*

FN = Fastener

mount, single axial

barbed port

Gage

001PG = 0 psi to 1 psi

005PG = 0 psi to 5 psi

015PG = 0 psi to 15 psi

030PG = 0 psi to 30 psi

060PG = 0 psi to 60 psi

100PG = 0 psi to 100 psi

150PG = 0 psi to 150 psi

*

1.6BD = ±1.6 bar

2.5BD = ±2.5 bar

004BD = ±4 bar

GN = Ribbed

fastener mount,

single axial

barbed port

Gage

NB = Fastener

mount, dual axial

ports, same side

060MG = 0 mbar to 60 mbar

100MG = 0 mbar to 100 mbar

160MG = 0 mbar to 160 mbar

250MG = 0 mbar to 250 mbar

400MG = 0 bar to 400 mbar

600MG = 0 bar to 600 mbar

001BG = 0 bar to 1 bar

1.6BG = 0 bar to 1.6 bar

2.5BG = 0 bar to 2.5 bar

004BG = 0 bar to 4 bar

006BG = 0 bar to 6 bar

010BG = 0 bar to 10 bar

*

RN = Single

radial barbed

port

RN = Single

radial barbed

port

RN = Single

radial barbed

port

RR = Dual radial

barbed ports,

same side

RR = Dual radial

barbed ports,

same side

RR = Dual radial

barbed ports,

same side

DR = Dual radial

barbed ports,

opposite sides

DR =Dual radial

barbed ports,

opposite sides

DR = Dual radial

barbed ports,

opposite sides

Options¹⁵

N = Dry gases only, no special options

D = Dry gases only, diagnostics on

T = Liquid media on port 1, no diagnostics

V = Liquid media on port 1, diagnostics on

HH = Fastener

mount, dual

radial barbed

ports, same side

*

HN = Fastener

mount, single

radial barbed

port

MN = Manifold

mount, outer

diameter seal

*

SN = Manifold

mount, inner

diameter seal

Notes:

11. The transfer function limits define the output of the sensor at a given pressure input. By specifying Pmin. and Pmax., the output at Pmin. and

Pmax., the complete transfer function of the sensor is defined. See Figure 2 for a graphical representation of the transfer function. Other

transfer functions are available. Contact Honeywell Customer Service for more information.

12. Analog output is also available. Contact Honeywell Customer Service for more information.

13. Custom pressure ranges are available. Contact Honeywell Customer Service for more information.

14. See Table 5 for an explanation of sensor pressure types.

15. See CAUTION on previous page.

4

www.honeywell.com/sensing

Figure 2. Transfer Function Limits

Figure 3. Completed Catalog Listing Example

SSCSANN100PGSA3

SIP package, AN pressure

port, no diagnostics, 100

psi gage, SPI output, 10%

to 90% calibration at

3.3 Vdc.

Table 5. Pressure Types

Pressure Type

Description

Output is proportional to the difference between applied pressure and a built-in reference to vacuum.

Pmin. is set at absolute zero pressure (full vacuum).

Absolute

Output is proportional to the difference between the pressures applied to each port. (Port 1 Port 2)

50% point of transfer function set at Port 1 = Port 2.

Output is proportional to the difference between applied pressure and atmospheric (ambient)

pressure. Pmin. is set at atmospheric pressure.

Differential

Gage

Table 6. Sensor Output at Significant Percentages

% Output

Digital Counts (decimal)

Digital Counts (hex)

0x0000

0

10

50

90

100

1638

8192

14746

16383

0x0666

0x2000

0x399A

0x3FFF

Table 7. Pressure Range Specifications for 1 psi to 150 psi

Long-term

Stability

(1000 hr,

Pressure Range

Order Code

Over-

Burst

Common Mode

Pressure¹⁸

pressure¹⁶

Pressure¹⁷

Pmin.

Pmax.

25 °C [77 °F])

Absolute

30 psi

60 psi

120 psi

250 psi

Differential

10 psi

30 psi

60 psi

120 psi

Gage

0 psi

15 psi

30 psi

60 psi

100 psi

150 psi

60 psi

120 psi

240 psi

250 psi

NA

0.25% FSS

015PA

030PA

060PA

100PA

150PA

-1 psi

-5 psi

-15 psi

-30 psi

-60 psi

1 psi

5 psi

15 psi

30 psi

60 psi

10 psi

40 psi

60 psi

120 psi

240 psi

150 psi

250 psi

0.35% FSS

0.25% FSS

001PD

005PD

015PD

030PD

060PD

0 psi

1 psi

5 psi

10 psi

30 psi

60 psi

120 psi

250 psi

10 psi

40 psi

60 psi

120 psi

240 psi

250 psi

150 psi

250 psi

0.35% FSS

0.25% FSS

001PG

005PG

015PG

030PG

060PG

100PG

150PG

15 psi

30 psi

60 psi

100 psi

150 psi

Honeywell Sensing and Control

5

Table 8. Pressure Range Specifications for 60 mbar to 10 bar

Pressure Range

Long-term

Stability

(1000 hr,

Over-

Burst

Common Mode

Pressure¹⁸

Order Code

pressure¹⁶

Pressure¹⁷

Pmin.

Pmax.

25 C [77 F])

Absolute

2 bar

4 bar

6 bar

8 bar

17 bar

Differential

500 mbar

1.4 bar

2 bar

0 bar

1 bar

1.6 bar

2.5 bar

4 bar

6 bar

10 bar

4 bar

8 bar

16 bar

17 bar

NA

0.25% FSS

001BA

1.6BA

2.5BA

004BA

006BA

010BA

-60 mbar

-100 mbar

-160 mbar

-250 mbar

-400 mbar

-600 mbar

-1 bar

-1.6 bar

-2.5 bar

-4 bar

60 mbar

100 mbar

160 mbar

250 mbar

400 mbar

600 mbar

1 bar

1.6 bar

2.5 bar

4 bar

700 mbar

2.5 bar

4 bar

8 bar

16 bar

10 bar

0.35% FSS

0.25% FSS

060MD

100MD

160MD

250MD

400MD

600MD

001BD

1.6BD

2 bar

4 bar

6 bar

8 bar

2.5BD

004BD

Gage

0 mbar

0 bar

60 mbar

100 mbar

160 mbar

250 mbar

400 mbar

600 mbar

1 bar

1.6 bar

2.5 bar

4 bar

500 mbar

1.4 bar

2 bar

4 bar

6 bar

8 bar

700 mbar

2.5 bar

4 bar

8 bar

3.5 bar

10 bar

16 bar

17 bar

0.35% FSS

0.25% FSS

060MG

100MG

160MG

250MG

400MG

600MG

001BG

1.6BG

2.5BG

004BG

006BG

010BG

16 bar

17 bar

6 bar

10 bar

17 bar

0 bar

Notes:

16. Overpressure: The maximum pressure which may safely be applied to the product for it to remain in specification once pressure is returned to

the operating pressure range. Exposure to higher pressures may cause permanent damage to the product. Unless otherwise specified this

applies to all available pressure ports at any temperature with the operating temperature range.

17. Burst pressure: The maximum pressure that may be applied to any port of the product without causing escape of pressure media. Product

should not be expected to function after exposure to any pressure beyond the burst pressure.

18. Common mode pressure: The maximum pressure that can be applied simultaneously to both ports of a differential pressure sensor without

causing changes in specified performance.

Table 9. Pinout for SMT and DIP Packages

Output Type

Pin 1

GND

Pin 2

Vsupply

Pin 3

SDA

Pin 4

SCL

Pin 5

NC

Pin 6

NC

Pin 7

NC

Pin 8

NC

I²C

SPI

MISO

SCLK

SS

NC

Table 10. Pinout for SIP Package

Output Type

Pin 1

Pin 2

Pin 3

Pin 4

I²C

GND

Vsupply

SDA

SCL

6

www.honeywell.com/sensing

Figure 4. DIP Pressure Port Dimensional Drawings (For reference only: mm [in])

DIP NN: No ports

DIP AN: Single axial barbed port

13,75

0,25

[0.010]

0,25

10,0

[0.39]

[0.541]

5,44

[0.214]

[0.010]

10,0

[0.39]

8

7

6

5

8

7

6

5

7,95

[0.313]

6,2

[0.24]

13,35

[0.525]

13,35

[0.525]

6,99

[0.275]

6,99

[0.275]

4,93 DIA.

[0.194]

PORT 2

PORT 1

PORT 2

PORT 1

1

2

3

4

1

2

3

4

9,24

[0.364]

11,21

[0.441]

9,24

[0.364]

10,85

[0.427]

2,54 TYP.

[0.100]

2,54 TYP.

[0.100]

8X 0,46

[0.018]

8X 0,46

[0.018]

DIP LN: Single axial barbless port

DIP RN: Single radial barbed port

5,80

0,25

[0.010]

[0.228]

[0.010]

5,80

[0.228]

10,0

[0.39]

10,0

[0.39]

8

7

6

5

8

7

6

5

2,47 DIA.

[0.097]

4,2

[0.17]

13,35

[0.525]

13,35

[0.525]

6,99

[0.275]

6,99

[0.275]

PORT 1

PORT 2

PORT 1

1,93 DIA.

[0.076]

1

2

3

4

1

2

3

4

9,24

[0.364]

9,24

[0.364]

2,54 TYP.

[0.100]

2,54 TYP.

[0.100]

11,21

[0.441]

11,21

[0.441]

13,75

[0.541]

6,95

[0.274]

1,00

[0.039]

8X 0,46

[0.018]

8X 0,46

[0.018]

DIP RR: Dual radial barbed ports, same side

DIP DR: Dual radial barbed ports, opposite sides

,25

0,25

15,76

[0.620]

10,0

[0.39]

6,16

[0.242]

6,16

[0.242]

[0.010]

10,0

[0.39]

4,0

[0.16]

8

7

6

5

2X 1,93 DIA.

[0.076]

2X 1,93 DIA.

[0.076]

8

7

6

5

13,35

PORT 1

PORT 2

13,35

[0.525]

6,99

[0.275]

6,99

PORT 2

[0.275]

PORT 1

PORT 2

4,65

[0.183]

PORT 1

PORT 2

1

2

3

4

9,24

[0.364]

9,24

[0.364]

2,54 TYP.

[0.100]

1

2

3

4

11,21

[0.441]

2,54 TYP.

[0.100]

11,21

[0.441]

3,78

[0.149]

3,78

[0.149]

8X 0,46

[0.018]

8X 0,46

[0.018]

Honeywell Sensing and Control

7

Figure 5. SMT Pressure Port Dimensional Drawings (For reference only: mm [in])

SMT NN: No ports SMT AN: Single axial barbed port

10,0

[0.39]

13,75

[0.541]

5,44

[0.214]

10,0

[0.39]

8

7

6

5

8

7

6

5

7,95

[0.313]

13,4

[0.53]

6,99

[0.275]

PORT 1

PORT 2

13,4

[0.53]

4,93 DIA.

[0.194]

6,99

[0.275]

PORT 2

PORT 1

1

2

3

4

8X 0,46

[0.018]

4,80

2,54 TYP.

[0.100]

1

2

3

4

[0.189]

4,80

[0.189]

8X 0,46

[0.018]

6,41

[0.252]

2,54 TYP.

[0.100]

6,77

[0.266]

SMT LN: Single axial barbless port

SMT RN: Single radial barbed port

5,80

[0.228]

5,80

[0.228]

10,0

[0.39]

10,0

[0.394]

8

7

6

5

8

7

6

5

4,2

[0.17]

2,47 DIA.

[0.097]

13,3

[0.53]

13,35

[0.525]

6,99

[0.275]

6,99

[0.275]

PORT 1

PORT 2

1,93 DIA.

[0.076]

PORT 1

1

2

3

4

4,80

8X 0,46

[0.018]

1

2

3

4

4,80

8X 0,46

[0.018]

2,54 TYP.

[0.100]

[0.189]

2,54 TYP.

[0.100]

[0.189]

6,77

[0.266]

6,77

[0.266]

13,75

[0.541]

SMT RR: Dual radial barbed ports, same side

SMT DR: Dual radial barbed ports, opposite sides

10,0

[0.39]

15,8

6,16

[0.242]

[0.62]

4,0

[0.16]

10,0

[0.39]

6,16

[0.242]

8

7

6

5

2X 2,93

[0.115]

2X 1,93 DIA.

[0.076]

8

7

6

5

13,35

[0.525]

PORT 1

PORT 2

6,99

[0.275]

13,4

[0.53]

PORT 1

PORT 2

2X 1,93 DIA.

[0.076]

6,99

[0.275]

4,6

[0.18]

PORT 2

PORT 1

1

2

3

4

4,80

8X 0,46

[0.018]

1

2

3

4

2,54 TYP.

[0.100]

[0.189]

4,80

8X 0,46

[0.018]

2,54 TYP.

[0.100]

[0.189]

6,77

[0.266]

6,77

[0.266]

3,78

[0.149]

3,78

[0.149]

8

www.honeywell.com/sensing

Figure 6. SIP Package Dimensional Drawings (For reference only: mm [in])

SIP NN: No ports

SIP AA: Dual axial barbed ports, opposite sides

10,0

22,06

4,87

[0.192]

[0.39]

[0.869]

10,0

[0.39]

PORT 1

PORT 2

10,0

[0.39]

PORT 2

PORT 1

2X 4.93 DIA.

[0.194]

15,2

[0.60]

15,2

[0.60]

1

2

3

4

1

2

3

4

0,25

[0.010]

2,54 TYP.

[0.100]

0,25

[0.010]

4X 0,51

[0.020]

4X 0,51

[0.020]

2,54 TYP.

[0.100]

SIP AN: Single axial barbed port

SIP LN: Single barbless port

10,0

13,75

10,0

[0.39]

[0.541]

[0.39]

10,0

[0.39]

PORT 2

10,0

[0.39]

PORT 1

PORT 2

PORT 1

4.93 DIA.

[0.194]

2,47 DIA.

[0.097]

15,2

[0.60]

15,2

[0.60]

1

2

3

4

1

2

3

4

0,25

[0.010]

0,25

[0.010]

2,54 TYP.

[0.100]

4X 0,51

[0.020]

2,54 TYP.

[0.100]

4X 0,51

[0.020]

SIP FF: Fastener mount, dual axial barbed ports, opposite sides

29,48

[1.161]

27,20

[1.071]

23,12

[0.910]

10,44

[0.411]

17,78

[0.700]

PORT 2

PORT 1

2X 3.94 DIA.

[0.155]

2X 4,78 DIA.

[0.188]

20,16

[0.794]

1

2

3

4

0,25

[0.010]

2,54 TYP.

[0.100]

4X 0,51

[.020]

SIP FN: Fastener mount, single axial barbed port

29,48

[1.161]

16,38

[0.645]

23,12

[0.910]

17,78

[0.700]

PORT 2

PORT 1

2X 3.94 DIA.

[0.155]

4.78 DIA.

[0.188]

20,16

[0.794]

1

2

3

4

0,25

[0.010]

2,54 TYP.

[0.100]

4X 0,51

[0.020]

Honeywell Sensing and Control

9

Figure 6. SIP Package Dimensional Drawings (continued)

SIP GN: Ribbed fastener mount, single axial barbed port

27,96

[1.101]

21,60

[0.850]

16,51

[0.650]

19,06

[0.750]

PORT 2

PORT 1

2X 3,94 DIA.

[0.155]

4.78 DIA.

[0.188]

10,63

[0.418]

1

2

3 4

0,25

[0.010]

2,54 TYP.

[0.100]

4X 0,51

[0.020]

SIP NB: Fastener mount, dual axial ports, same side

27,31

[1.075]

25,3

[0.996]

21,60

[0.850]

2X 4,80 DIA.

[0.189]

PORT 2

PORT 1

22,87

[0.900]

2X 3.50 DIA.

[0.138]

13

[0.52]

4

3

2

1

0,25

[0.010]

4X 0,51

[0.020]

2,54 TYP.

[0.100]

SIP RN: Single radial barbed port

10,0

[0.39]

5,80

[0.228]

PORT 1

10,0

[0.39]

PORT 2

1,92 DIA.

[0.076]

15,2

[0.60]

1

2

3

4

0,25

[0.010]

2,54 TYP.

[0.100]

4X 0,51

[0.020]

SIP RR: Dual radial barbed ports, same side

10,0

[0.39]

6,16

[0.243]

PORT 1

10,0

[0.39]

PORT 2

2X 1,92 DIA.

[0.076]

15,2

[0.60]

1

2

3

4

0,25

[0.010]

2,54 TYP.

[0.100]

4X 0,51

[0.020]

10

www.honeywell.com/sensing

Figure 6. SIP Package Dimensional Drawings (continued)

SIP DR: Dual radial barbed ports, opposite side

SIP HH: Fastener mount, dual radial barbed ports, same side

29,62

10,58

15,8

[1.166]

[0.416]

[0.62]

23,12

[0.910]

6,64

[0.261]

10,0

[0.39]

6,16

[0.243]

PORT 2

PORT 1

PORT 2

10,0

[0.39]

PORT 1

PORT 2

28,96

[1.140]

2X 4.93 DIA.

[0.194]

15,2

[0.60]

1

2

3

4

11,27

[0.444]

0,25

[0.010]

2,54 TYP.

[0.100]

4X 0,51

[0.020]

1

2

3 4

0,25

[0.010]

2,54 TYP.

[0.100]

4X 0,51

[0.020]

SIP HN: Fastener mount, single radial barbed port

SIP MN: Manifold mount, outer diameter seal

23,12

5,36

[0.910]

7,97

[0.211]

PORT 2

PORT 1

[0.314]

4,78 DIA.

[0.188]

15,24 DIA.

[0.600]

PORT 1

28,96

[1.140]

PORT 2

12,5

[0.49]

2X 3,94 DIA.

[0.155]

1

2

3

4

0,25

[0.010]

11,27

[0.444]

4X 0,51

[0.020]

2,54 TYP.

[0.100]

1

2

3

4

0,25

[0.010]

2,54 TYP.

[0.100]

4X 0,51

[0.020]

SIP SN: Manifold mount, inner diameter seal

PORT 2

5,1

[0.20]

12,57

[0.495]

PORT 1

13,11

[0.516]

15,6

[0.61]

1

2

3

4

2,54 TYP.

[0.100]

4X 0,51

[0.020]

Honeywell Sensing and Control

11

WARNING

PERSONAL INJURY

MISUSE OF DOCUMENTATION

DO NOT USE these products as safety or emergency stop

devices or in any other application where failure of the

product could result in personal injury.

The information presented in this product sheet is for

reference only. DO NOT USE this document as a

product installation guide.

Failure to comply with these instructions could result

in death or serious injury.

Complete installation, operation, and maintenance

information is provided in the instructions supplied with

each product.

Failure to comply with these instructions could result in

death or serious injury.

WARRANTY/REMEDY

Honeywell warrants goods of its manufacture as being free of

defective materials and faulty workmanship. Honeywell s

standard product warranty applies unless agreed to otherwise

by Honeywell in writing; please refer to your order

acknowledgement or consult your local sales office for specific

warranty details. If warranted goods are returned to Honeywell

during the period of coverage, Honeywell will repair or replace,

at its option, without charge those items it finds defective. The

foregoing is buyer s sole remedy and is in lieu of all other

warranties, expressed or implied, including those of

merchantability and fitness for a particular purpose. In no

event shall Honeywell be liable for consequential, special,

or indirect damages.

SALES AND SERVICE

Honeywell serves its customers through a worldwide network

of sales offices, representatives and distributors. For

application assistance, current specifications, pricing or name

of the nearest Authorized Distributor, contact your local sales

office or:

E-mail: info.sc@honeywell.com

Internet: www.honeywell.com/sensing

Phone and Fax:

While we provide application assistance personally, through

our literature and the Honeywell web site, it is up to the

customer to determine the suitability of the product in the

application.

Asia Pacific

Europe

+65 6355-2828; +65 6445-3033 Fax

+44 (0) 1698 481481; +44 (0) 1698 481676 Fax

+1-305-805-8188; +1-305-883-8257 Fax

+1-800-537-6945; +1-815-235-6847

+1-815-235-6545 Fax

Latin America

USA/Canada

Specifications may change without notice. The information we

supply is believed to be accurate and reliable as of this

printing. However, we assume no responsibility for its use.

Sensing and Control

Honeywell

1985 Douglas Drive North

008213-2-EN IL50 GLO Printed in USA

March 2011

Golden Valley, MN 55422

www.honeywell.com


型号：	SSCSANN060MD7A5
厂家：	Honeywell
描述：	Peizoresistive Sensor, Differential, -.87Psi Min, 0.87Psi Max, 0.25%, 0.20-0.80V, Rectangular, Through Hole Mount, ROHS COMPLIANT, CERAMIC, SIP-4 传感器换能器压力传感器
文件：	总12页 (文件大小：1201K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SSCSANN060MD7A5 [HONEYWELL]

相关型号：

SSCSANN060MDAA5

SSCSANN060MDAB5

SSCSANN060MDAC5

SSCSANN060MG2A3

SSCSANN060MG2A5

SSCSANN060MG3A3

SSCSANN060MG3A5

SSCSANN060MG4A3

SSCSANN060MG4A5

SSCSANN060MG5A3

SSCSANN060MG5A5

SSCSANN060MG6A3