XCA501AN [HONEYWELL]

Peizoresistive Sensor, Absolute, 0Psi Min, 1Psi Max, 1-6V, Rectangular, Through Hole Mount;


型号：	XCA501AN
厂家：	Honeywell
描述：	Peizoresistive Sensor, Absolute, 0Psi Min, 1Psi Max, 1-6V, Rectangular, Through Hole Mount 传感器换能器
文件：	总4页 (文件大小：158K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Pressure Sensors

Fixed Output, Amplified

Calibrated with Ratiometric Output Voltage

XCA Series

FEATURES

Precise Temperature

Compensation

Low Cost

High Performance

Gage, Absolute and

Differential Versions

Constant Voltage

Excitation

Calibrated Output

Ratiometric Output Voltage

TYPICAL APPLICATIONS

Ventilators

The XCA Series of pressure sensors use state of the art silicon

Continuous Positive

Airway Pressure (CPAP)

Systems

micromachined pressure sensors in conjunction with stress free packaging

techniques to provide highly accurate, amplified, calibrated and

temperature compensated pressure sensors for the most demanding

applications.

When operated from a fixed 5.0 Vdc supply, the XCA gage and absolute

sensors provide a 0.25 Vdc to 4.25 Vdc output (4.0 Vdc Span). The XCA5

Series offers an industry standard 1-6 Vdc output (5 Vdc Span) when

operated from a fixed 8.0 Vdc supply.

Audiometers

Air Compressors

Chemical Analyzers

Variable Air Volume (VAV)

Controllers

Airflow

All other features are the same for the entire family, incorporating stress

isolation and factory calibration to achieve optimum accuracy in this

industry standard package.

WARNING

PERSONAL INJURY

WARNING

DO NOT USE these products

as safety or emergency stop

devices or in any other

MISUSE OF DOCUMENTATION

The information presented in this product sheet is for reference only. Do

not use this document as product installation information.

Complete installation, operation, and maintenance information is

provided in the instructions supplied with each product.

application where failure of the

product could result in

personal injury.

Failure to comply with these instructions could result in death or serious

injury.

Failure to comply with these

instructions could result in

death or serious injury.

Sensing and Control

Pressure Sensors

XCA Series

Calibrated with Ratiometric Output Voltage

XCA4 Electrical Specifications at 5 Vdc Excitation, XCA5 Electrical Specifications at 8 Vdc Excitation, 25 °C*

Min.

Typ.

Max.

Units

Excitation Voltage

3.0

5.0

Null XCA4 (except Differential)

Null XCA4 Differential

0.15

2.20

0.95

2.45

3.90

±1.95

4.90

±2.45

0.25

2.25

1.00

3.50

4.00

±2.00

5.00

±2.50

±0.30

±0.1

±0.6

0.35

2.30

1.05

3.55

4.10

±2.05

5.10

±2.55

±0.50

Null XCA5

Null XCA5 Differential

Span XCA4 (except Differential)

Span XCA4 Differential, changes with ± pressure applied

Span XCA5

Span XCA5 Differential, changes with ± pressure applied

Linearity, Hysteresis Error***

%Span

Repeatability

Temp. Change Span (0 °C to +50 °C [+32 °F to +122 °F])**

Temp. Change Offset (0 °C to +50 °C [+32 °F to +122 °F])**

Operating Temperature

±1.0

+85

+125

-25

-40

°C

psi

Storage Temperature

Common Mode Pressure

Proof pressure (times span pressure)****

Burst pressure (times span pressure)****

*Note 1:

All parameters are measured at 5.0 volt excitation for XCA4 and at 8.0 volt excitation for XCA5, for the nominal full

scale pressure and room temperature unless otherwise specified. Pressure measurements are with positive pressure

applied to Port 2 or Vacuum to Port 1. For absolute devices, pressure is applied to Port 2.

Shift is relative to 25 °C

Measured at ½ full scale rated pressure using BFSL

Proof pressure should not exceed 200 psi and burst pressure should not exceed 300 psi

**Note 2:

***Note 3:

****Note 4:

Equivalent Circuit

Pinout

1. V Excitation

2. Common

3. V Output

4. V Offset

2 Honeywell · Sensing and Control

Pressure Sensors

XCA Series

Calibrated with Ratiometric Output Voltage

MOUNTING DIMENSIONS (for reference only) mm/in

XCA SERIES, XCA MOLDED PACKAGE

APPLICATION INFORMATION

MEDIA COMPATIBILITY, WETTED MATERIALS

(Apply clean air dry only)

PRESSURE COMPATIBILITY

XCA4 Gage and Absolute: Measures gage pressure

only with positive pressure to port 2. There will be a

small output voltage between the actual offset voltage

Port 2

P2 Port: Media must be

compatible with nylon housing,

epoxy adhesive and silicon. Port

and ground proportional to vacuum if applied to port 2.

XCA4 Differential: Measures differential pressure with

positive pressure to port 2 and negative pressure,

vacuum, to port 1. The offset is set to 2.25 volts at 0

psid. It will change slightly with changes in common

mode (line) pressure. The maximum common mode or

line pressure is 50 psi except for 5 psi and less where

the maximum is 190 psi.

not used for absolute devices.

Port 1

P1 Port: Dry Gases Only. Media

must be compatible with epoxy

based adhesive. Dead volume of

0.0102 cubic inches.

XCA5 Gage and Absolute: Measures gage pressure

only with positive pressure to port 2. There will be a

small output voltage between the actual offset voltage

and ground proportional to vacuum if applied to port 2.

Honeywell · Sensing and Control 3

Pressure Sensors

XCA Series

Calibrated with Ratiometric Output Voltage

XCA SERIES ORDER GUIDE

(Not all product combinations are released.)

XCA

Package Type

N - Plastic

Series

XCA - compensated and calibrated, mV

Pressure Measurement

L - Low Pressure (in H₂O)

No Character - Indicates Pressure (psi)

Pressure Reference

G - Gage

D - Differential

A - Absolute > 5 psi

Output Voltage

4 - Calibrated 4.0 Volt Output

5 - Calibrated 5.0 Volt Output

Pressure Reference¹

10 in H₂O

01, 05, 15, 30, 60, 100, 150 psi

NOTE 1: The 10 in H₂O and 1 psi range exhibit a slight sensitivity to change in position (gravity sensitivity).

WARRANTY/REMEDY

Specifications may change

without notice. The information

we supply is believed to be

accurate and reliable as of this

printing. However, we assume no

responsibility for its use.

For application assistance,

current specifications, or name of

the nearest Authorized

Distributor, contact a nearby

sales office. Or call:

Honeywell warrants goods of

its manufacture as being free of

defective materials and faulty

workmanship. Contact your local

sales office for warranty

1-800-537-6945 USA

information. If warranted goods

are returned to Honeywell during

the period of coverage,

Honeywell will repair or replace

without charge those items it

finds defective. The foregoing is

Buyer’s sole remedy and is in

lieu of all other warranties,

expressed or implied,

While we provide application

assistance personally, through

our literature and the Honeywell

web site, it is up to the customer

to determine the suitability of the

product in the application.

1-800-737-3360 Canada

1-815-235-6847 International

FAX

1-815-235-6545 USA

INTERNET

www.honeywell.com/sensing

info.sc@micro.honeywell.com

including those of

merchantability and fitness for

a particular purpose.

Sensing and Control

Honeywell

11 West Spring Street

Freeport, Illinois 61032

Printed with Soy Ink

on 50% Recycled Paper

008051-2-EN IL50 GLO 0801 Printed in USA

www.honeywell.com/sensing

XCA501AN [HONEYWELL]

相关型号：

XCA501DN

XCA501GN

XCA505AN

XCA505DN

XCA505GN

XCA5100AN

XCA5100DN

XCA5100GN

XCA5150AN

XCA5150GN

XCA515GN

XCA530AN