XPC01GBTC [HONEYWELL]

Peizoresistive Sensor, Gage, 0Psi Min, 1Psi Max, 0-18mV, Through Hole Mount;


型号：	XPC01GBTC
厂家：	Honeywell
描述：	Peizoresistive Sensor, Gage, 0Psi Min, 1Psi Max, 0-18mV, Through Hole Mount 传感器换能器
文件：	总6页 (文件大小：1406K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Silicon Pressure Sensors

Uncompensated/Compensated

and Compensated Calibrated

XPC, XPCL,

XPX, XPXL Series

FEATURES

• Low Cost, Small Size

• Temperature Compensated

• Zero and Span Calibrated

• Millivolt Output

• Differential, Gage and

Absolute Pressure

• Constant Voltage

Excitation

• High Impedance - Low

Current

TYPICAL APPLICATIONS

• Medical Applications

• Applications Requiring

Small Size

GENERAL DESCRIPTION

The XPC/XPCL and XPX/XPXL Series sensors integrate silicon

micromachined sensing technology, temperature compensation, and

calibration in a complete family of low cost packages. This series offers the

most cost-effective solution for design requirements.

• Applications Requiring

Vacuum and Positive

• Pressure Reference, or

Both

These piezoresistive pressure sensors use micromachined silicon chips

mounted on a ceramic and protected with a plastic cap. Several tube

arrangements with nylon housings are available for various pressure

applications.

On devices of 5 psi and above, the topside of the chip is protected against

humidity by a Silgel coating. While the sensors are designed for use with

noncorrosive, nonionic pressure media, they accommodate many gases that

are used in medical applications.

WARNING

PERSONAL INJURY

DO NOT USE these

products as safety or

emergency stop devices or

in any other application

where failure of the product

could result in personal

injury.

Failure to comply with

these instructions could

result in death or serious

injury.

WARNING

MISUSE OF DOCUMENTATION

• The information presented in this product sheet is for reference only.

Do not use this document as a product installation guide.

• Complete installation, operation, and maintenance information is

provided in the instructions supplied with each product.

Failure to comply with these instructions could result in death or

serious injury.

Sensing and Control

Silicon Pressure Sensors

XPC, XPCL

XPX, XPXL Series

Uncompensated/Compensated

and Compensated Calibrated

ELECTRICAL SPECIFICATIONS

XPC and XPCL @ 12 Vdc,

XPX and XPXL @ 5 Vdc,

25 °C [77 °F]

Min.

3.0

-1.0

Typ.

12.0

Max.

16.0

1.0

Min.

3.0

-50

Typ.

5.0

Max.

12.0

Units

Vdc

Excitation Voltage

Null

Offset Temperature Shift 0 °C to 70 °C

[32 °F to 158 °F]**

Full Scale Temperature Shift 0 °C to

70 °C [32 °F to 158 °F]¹

Linearity, Hysteresis Error²

Input Resistance

1.0

0.5

-2050

PPM/°C

0.25

3.0

% Span

5.0

-25 [-13]

-40 [-40]

0.25

3.0

1.0

% Span

kΩ

°C [°F]

5.0

-25 [-13]

Output Resistance

Operating Temperature

Storage Temperature

Common Mode Pressure

85 [185]

125 [257] -40 [-40]

85 [185]

125 [257] °C [°F]

psi

gram

Weight

Note 1: Shift is relative to 25 °C [77 °F]

Note 2: Measured at 1/2 full scale rated pressure using BFSL

ABSOLUTE OUTPUT

XPC@ 12 Vdc,

25 °C [77 °F]

XPX @ 5 Vdc,

25 °C [77 °F]

Overpressure

(Psi)

FS Pressure

Output Full Scale Span, (mV)

Min.

Typ.

Max.

Min.

112

168

189

210

Typ.

168.5

253

263.5

295

Max.

225

338

380

Max.

180

250

5 psi

15 psi

30 psi

60 psi

100 psi

100

105

GAGE/DIFFERENTIAL¹OUTPUT

FS Pressure

XPC and XPCL @ 12 Vdc,

25 °C [77 °F]

XPX and XPXL @ 12 Vdc,

25 °C [77 °F]

Overpressure

(Psi)

Output Full Scale Span, (mV)

Min.

Typ.

100

Max.

105

Min.

Typ.

78.5

168.5

253

263.5

295

262.5

Max.

180

250

4 in H2O

10 in H2O

1 psi

5 psi

15 psi

30 psi

60 psi

100 psi

150 psi

112

110

225

338

380

338

112

168

189

210

187

Note 1: Differential common mode pressure should not exceed 50 psi

2 Honeywell • Sensing and Control

Silicon Pressure Sensors

XPC, XPCL

XPX, XPXL Series

Uncompensated/Compensated

and Compensated Calibrated

PHYSICAL DIMENSIONS for reference only mm (in)

D/A Housing (Differential/Absolute)

GFS/AFS Housing (Gage/Absolute Offset Axial)

GBFS Housing (Gage Backside Offset Axial)

GF/AF Housing (Gage/Absolute Axial)

Honeywell • Sensing and Control 3

Silicon Pressure Sensors

XPC, XPCL

XPX, XPXL Series

Uncompensated/Compensated

and Compensated Calibrated

DF Housing (Differential Axial)

GBF Housing (Gage Backside Axial)

Honeywell • Sensing and Control 4

Silicon Pressure Sensors

XPC, XPCL

XPX, XPXL Series

Uncompensated/Compensated

and Compensated Calibrated

GT/AT Housing (Gage/Absolute Radial)

GBT Housing (Gage Backside Radial)

DT Housing (Differential Radial)

CPC/CPCL/CPX/CPXL SERIES ORDER GUIDE

Note 1: Option available in ported gage version only

Honeywell • Sensing and Control 5

Silicon Pressure Sensors

XPC, XPCL

XPX, XPXL Series

Uncompensated/Compensated

and Compensated Calibrated

EQUIVALENT CIRCUIT

Pinout

1. -V Excitation

2. + Output Signal

3. +V Excitation

4. - Output Signal

Media Compatibility

Clean, dry gases only

P1 Port: Media must be compatible with epoxy based

adhesive and silicon gel.

P2 Port: Media must be compatible with nylon housing,

epoxy based adhesive and silicon.

WARRANTY/REMEDY

Honeywell warrants goods of its manufacture as

being free of defective materials and faulty

workmanship. Contact your local sales office for

warranty information. If warranted goods are

returned to Honeywell during the period of coverage,

Honeywell will repair or replace without charge those

items it finds defective. The foregoing is Buyer’s

sole remedy and is in lieu of all other warranties,

expressed or implied, including those of

merchantability and fitness for a particular

purpose.

While we provide application assistance personally,

through our literature and the Honeywell web site, it

is up to the customer to determine the suitability of

the product in the application.

For application assistance, current specifications, or

name of the nearest Authorized Distributor, contact a

nearby sales office. Or call:

1-800-537-6945 USA/Canada

1-815-235-6847 International

FAX

1-815-235-6545 USA

Specifications may change without notice. The

information we supply is believed to be accurate and

reliable as of this printing. However, we assume no

responsibility for its use.

INTERNET

www.honeywell.com/sensing

info.sc@honeywell.com

Sensing and Control

www.honeywell.com/sensing

Honeywell

11 West Spring Street

Freeport, Illinois 61032

008046-3-EN IL50 GLO 1104 Printed in USA

相关型号：