XPX05DC [HONEYWELL]

Pressure Sensor, DIFFERENTIAL, PEIZORESISTIVE PRESSURE SENSOR, 0-5Psi, 0-630mV, ROUND, THROUGH HOLE MOUNT;


型号：	XPX05DC
厂家：	Honeywell
描述：	Pressure Sensor, DIFFERENTIAL, PEIZORESISTIVE PRESSURE SENSOR, 0-5Psi, 0-630mV, ROUND, THROUGH HOLE MOUNT
文件：	总6页 (文件大小：362K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Micromachined Silicon Pressure Sensors

Uncompensated and

XPXL, XPX,

Compensated and Calibrated

XPCL, XPC Series

FEATURES

Low Cost, Small Size

Temperature

Compensated

Zero and Span Calibrated

MilliVolt Output

Differential, Gage and

Absolute Pressure

Constant Voltage

Excitation

High Impedance — Low

Current

The XPXL/XPX and XPCL/XPC Series sensors integrate silicon

TYPICAL APPLICATIONS

micromachined sensing technology, temperature compensation, and

calibration in a complete family of low-cost packages. This series offers

the most cost-effective solution for design requirements.

These piezoresistive pressure sensors use micromachined silicon

chips mounted on a ceramic and protected with a plastic cap. Several

tube arrangements with nylon housings are available for various pressure

applications.

Medical Applications

Applications Requiring

Small Size

Applications Requiring

Vacuum and Positive

Pressure Reference, or

Both

On devices of 5 psi and above, the topside of the chip is protected

against humidity by a Silgel coating. While the sensors are designed for

use with noncorrosive, nonionic pressure media, they accommodate

many gases that are used in medical applications.

WARNING

PERSONAL INJURY

MISUSE OF DOCUMENTATION

DO NOT USE these products

as safety or emergency stop

devices or in any other

application where failure of

the product could result in

personal injury.

Failure to comply with these

instructions could result in

death or serious injury.

The information presented in this product sheet is for reference only.

Do not use this document as product installation information.

Complete installation, operation, and maintenance information is

provided in the instructions supplied with each product.

Failure to comply with these instructions could result in death or

serious injury.

Sensing and Control

Micromachined Silicon Pressure Sensors

Uncompensated and

XPXL, XPX,

Compensated and Calibrated

XPCL, XPC Series

XPXL/XPX and XPCL/XPC Electrical Specifications at 12 ±0.01 Vdc Excitation @ 25 °C*

XPXL and XPX XPCL and XPC

Min.

3.0

Typ.

Max.

16.0

Min.

3.0

Typ.

Max.

16.0

+1.0

Units

Vdc

Excitation Voltage

Null

12.0

-120

+120

-1.0

Offset Temperature Shift

(0 °C to 70 °C)**

Full Scale Temperature Shift

(0 °C to 70 °C)**

±0.5

±1.0

-2050

PPM/°C

0.25

% Span

±2

1.0

Linearity, Hysteresis Error*** --

1.0

0.25

Input Resistance

5.0

Output Resistance

Operating Temperature

Storage Temperature

3.0

-25

-40

+85

+125

-25

-40

+85

+125

°C

Common Mode Pressure

Proof Pressure

psi

Proof Pressure XPXL/XPCL

Burst Pressure

100

in H₂O

Weight

gram

*Note 1:

All parameters are measured at 12 Vdc excitation, pressure specs obtained with pressure applied to the front of the sensor.

**Note 2:

Shift is relative to 25 °C.

***Note 3: Measured at ½ full scale rated pressure using BFSL.

Equivalent Circuit

Pinout

1. -V Excitation

2. + Output Signal

3. +V Excitation

4. - Output Signal

MEDIA COMPATIBILITY

P1 PORT: DRY GASES ONLY.

Media must be compatible with

epoxy-based adhesive.

P2 PORT: Media must be

compatible with nylon housing,

epoxy adhesive and silicon.

2 Honeywell · Sensing and Control

Micromachined Silicon Pressure Sensors

Uncompensated and

XPXL, XPX,

Compensated and Calibrated

XPCL, XPC Series

XPX and XPC Absolute Output at 12 ±0.01 Vdc Excitation, 25 °C

XPX

XPC

Output Full Scale Span, (mV)

FS Pressure

Output Full Scale Span, (mV)

(psi)

Min.

270

405

454

504

Typ.

420

630

634

708

Max.

540

810

813

912

Min.

Typ.

Max.

100

105

XPXL, XPX and XPCL and XPC Gage and Differential* Output at 12 ±0.01 Vdc Excitation, 25 °C

XPXL and XPX

XPCL and XPC

FS Pressure

Output Full Scale Span, (mV)

(psi)

Min.

Typ.

Max.

Min.

Typ.

Max.

4 in H₂O

10 in H₂O

180

420

630

634

708

630

264

540

810

813

912

810

270

405

406

454

504

450

100

150

100

105

*Differential Common Mode Pressure should not exceed 50 psi.

Honeywell · Sensing and Control 3

Micromachined Silicon Pressure Sensors

Uncompensated and

XPXL, XPX,

Compensated and Calibrated

XPCL, XPC Series

MOUNTING DIMENSIONS (for reference only) mm/in

XPXL/XPX and XPCL/XPC Series

D/A Housing

GFS/AFS Housing

GBFS Housing

DF Housing

GF/AF Housing

DT Housing

4 Honeywell · Sensing and Control

Micromachined Silicon Pressure Sensors

Uncompensated and

XPXL, XPX,

Compensated and Calibrated

MOUNTING DIMENSIONS (for reference only) mm/in

XPCL, XPC Series

XPXL/XPX and XPCL/XPC Series

GT/AT Housing

GBT Housing

GBF Housing

Honeywell · Sensing and Control 5

Micromachined Silicon Pressure Sensors

Uncompensated and

XPXL, XPX,

Compensated and Calibrated

XPCL, XPC Series

XPXL/XPX Series and XPCL/XPC Series Order Guide

(Not all product combinations are released.)

XPC

Accuracy Grade

C - Commercial

Series

Port Option

XPX - uncompensated and uncalibrated, mV

XPC - Motorola, compensated and calibrated, mV

F - Axial

T - Radial

FS - Offset Axial¹

Pressure Measurement

Port Operation¹

L - Low Pressure (in H O)

No Character - Indicates Pressure (psi)

B - Backside

Pressure Range

Pressure Reference

G - Gage

D - Differential

A - Absolute > 5 psi

04 in H O, 10 in H₂O

01, 05,²15, 30, 60, 100, 150 psi

NOTE 1: Option available in Ported Gage Version Only

WARRANTY/REMEDY

Specifications may change

without notice. The information

we supply is believed to be

accurate and reliable as of this

printing. However, we assume no

responsibility for its use.

For application assistance,

current specifications, or name of

the nearest Authorized

Distributor, contact a nearby sales

office. Or call:

Honeywell warrants goods of its

manufacture as being free of

defective materials and faulty

workmanship. Contact your local

sales office for warranty

1-800-537-6945 USA

information. If warranted goods

are returned to Honeywell during

the period of coverage, Honeywell

will repair or replace without

charge those items it finds

While we provide application

assistance personally, through

our literature and the Honeywell

web site, it is up to the customer

to determine the suitability of the

product in the application.

1-800-737-3360 Canada

1-815-235-6847 International

FAX

1-815-235-6545 USA

INTERNET

www.honeywell.com/sensing

info.sc@micro.honeywell.com

defective. The foregoing is

Buyer’s sole remedy and is in

lieu of all other warranties,

expressed or implied, including

those of merchantability and

fitness for a particular purpose.

Sensing and Control

Honeywell

11 West Spring Street

Freeport, Illinois 61032

Printed with Soy Ink

on 50% Recycled Paper

008046-2-EN IL50 GLO 0801 Printed in USA

www.honeywell.com/sensing

相关型号：