XSC05DBFC [HONEYWELL]

Peizoresistive Sensor;
XSC05DBFC
型号: XSC05DBFC
厂家: Honeywell    Honeywell
描述:

Peizoresistive Sensor

传感器 换能器
文件: 总2页 (文件大小:39K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Installation Instructions for the  
ISSUE 2  
Uncompensated, Compensated and Calibrated  
Pressure Sensors  
PK 80158  
XSXL, XSX, XSCL, XSC Series  
XSXL, XSX, XSCL, AND XSC SERIES PERFORMANCE  
CHARACTERISTICS AT 12.0 ± 0.01 VDC EXCITATION,  
@ 25 °C  
WARNING  
PERSONAL INJURY  
DO NOT USE these products as safety or  
emergency stop devices, or in any other  
application where failure of the product could  
result in personal injury.  
Failure to comply with these instructions  
could result in death or serious injury.  
Min.  
Typ.  
Max.  
Units  
Excitation (XSXL, XSX)  
Excitation (XSCL, XSC)  
Input Resistance  
Output Resistance  
Weight  
5
12  
Vdc  
3.0  
12  
3
16  
Vdc  
kOhm  
kOhm  
gram  
3
2
GENERAL INFORMATION  
ENVIRONMENTAL SPECIFICATIONS  
The XSXL/XSX and XSCL/XSC Series  
sensors integrate silicon micromachined  
sensing technology, temperature  
Operating  
Temperature  
-25 °C to 85 °C  
[-13 °F to 185 °F]  
-40 °C to 125 °C  
[-40 °F to 257 °F]  
Storage  
compensation and calibration in a complete  
family of low-cost packages. These  
piezoresistive pressure sensors use  
micromachined silicon chips mounted on a  
ceramic and protected with a plastic cap.  
Several tube arrangements with nylon  
housings are available for various pressure  
applications.  
Gage pressure is measured with respect to  
ambient pressure. When applied pressure  
increases, the differential voltage between  
the two output pins increases. As pressure  
decreases, differential voltage decreases.  
Differential sensors provide a differential  
voltage proportional to the pressure  
differential between port P2 and P1. As  
DP = P2 – P1 increases, differential voltage  
increases. As DP = P2 – P1 decreases,  
differential voltage decreases.  
Temperature  
Media Compatibility  
P1 Port ( Dry Gases Only): Media must  
be compatible with epoxy based  
adhesive.  
P2 Port: Media must be compatible with  
nylon housing, epoxy adhesive and  
silicon.  
SOLDERING  
Limit soldering to 315 °C [600 °F] maximum, with duration  
of five seconds maximum.  
EQUIVALENT CIRCUIT  
3
4
2
1
PIN DESIGNATIONS  
1. – V Excitation  
2. + Output Signal  
3. + V Excitation  
4. – Output Signal  
Sensing and Control  
© Honeywell 2003, All Rights Reserved  
XSXL, XSX, XSCL, XSC Series  
ISSUE 2 PK 80158  
MOUNTING DIMENSIONS (for reference only) mm/in  
XSXL/XSX AND XSCL/XSC Series  
XCS/XSXL/XSX A/D/G Style  
XSCL/XSC with Port AF/GF Style  
WARRANTY/REMEDY  
While we provide application assistance  
personally, through our literature and the  
Honeywell web site, it is up to the customer to  
determine the suitability of the product in the  
application.  
For application assistance, current specifications,  
or name of the nearest Authorized Distributor,  
contact a nearby sales office. Or call:  
1-800-537-6945 USA  
1-800-737-3360 Canada  
1-815-235-6847 International  
FAX  
1-815-235-6545 USA  
INTERNET  
Honeywell warrants goods of its manufacture as  
being free of defective materials and faulty  
workmanship. Contact your local sales office for  
warranty information. If warranted goods are  
returned to Honeywell during the period of  
coverage, Honeywell will repair or replace without  
charge those items it finds defective. The foregoing  
is Buyer’s sole remedy and is in lieu of all other  
warranties, expressed or implied, including  
those of merchantability and fitness for a  
particular purpose.  
Specifications may change without notice. The  
information we supply is believed to be accurate  
and reliable as of this printing. However, we  
assume no responsibility for its use.  
www.honeywell.com/sensing  
info.sc@honeywell.com  
Sensing and Control  
Honeywell  
11 West Spring Street  
Freeport, Illinois 61032  
P80158-2-EN IL50 GLO 303 Printed in USA  
www.honeywell.com/sensing  

相关型号:

XSC05DBFH

Peizoresistive Sensor
HONEYWELL

XSC05DBTC

Peizoresistive Sensor
HONEYWELL

XSC05DBTH

Peizoresistive Sensor
HONEYWELL

XSC05DC

Peizoresistive Sensor, Differential, 0Psi Min, 5Psi Max, 0-90mV, Through Hole Mount
HONEYWELL

XSC05DFC

Peizoresistive Sensor, Differential, 0Psi Min, 5Psi Max, 0-90mV, Through Hole Mount
HONEYWELL

XSC05DH

Peizoresistive Sensor, Differential, 0Psi Min, 5Psi Max, 0-60mV, Circular, Through Hole Mount
HONEYWELL

XSC05DTC

Peizoresistive Sensor, Differential, 0Psi Min, 5Psi Max, 0-90mV, Through Hole Mount
HONEYWELL

XSC05GBFC

Peizoresistive Sensor, Gage, 0Psi Min, 5Psi Max, 0-90mV, Through Hole Mount
HONEYWELL

XSC05GBFH

Peizoresistive Sensor
HONEYWELL

XSC05GBFSC

Peizoresistive Sensor, Gage, 0Psi Min, 5Psi Max, 0-90mV, Through Hole Mount
HONEYWELL

XSC05GBFSH

Peizoresistive Sensor
HONEYWELL

XSC05GBTC

Peizoresistive Sensor, Gage, 0Psi Min, 5Psi Max, 0-90mV, Through Hole Mount
HONEYWELL