XSX01GBFSC [HONEYWELL]
Peizoresistive Sensor, Gage, 0Psi Min, 1Psi Max, 0-180mV, Through Hole Mount;
| 型号： | XSX01GBFSC |
| 厂家： | 
Honeywell |
| 描述： | Peizoresistive Sensor, Gage, 0Psi Min, 1Psi Max, 0-180mV, Through Hole Mount 传感器 换能器 |
| 文件： | 总4页 (文件大小：163K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Micromachined Silicon Pressure Sensors
Uncompensated and
XSXL, XSX,
Compensated and Calibrated
XSCL, XSC Series
FEATURES
·
·
Low Cost, Small Size
Temperature
Compensated
·
·
·
Zero and Span Calibrated
Millivolt Output
Differential, Gage and
Absolute Pressure
Constant Voltage
Excitation
·
·
High Impedance — Low
Current
TYPICAL APPLICATIONS
The XSXL/XSX and XSCL/XSC Series sensors integrate silicon
·
·
Medical Applications
Applications Requiring
Small Size
micromachined sensing technology, temperature compensation, and
calibration in a complete family of low cost packages. This series offers the
most cost-effective solution for design requirements.
·
Applications Requiring
Vacuum and Positive
Pressure Reference, or
Both
These piezoresistive pressure sensors use micromachined silicon chips
mounted on a ceramic and protected with a plastic cap. Several tube
arrangements with nylon housings are available for various pressure
applications.
On devices of 5 psi and above, the topside of the chip is protected
against humidity by a Silgel coating. While the sensors are designed for
use with noncorrosive, nonionic pressure media, they accommodate many
gases that are used in medical applications.
WARNING
WARNING
MISUSE OF DOCUMENTATION
PERSONAL INJURY
·
The information presented in this product sheet is for reference only. Do
not use this document as product installation information.
Complete installation, operation, and maintenance information is
provided in the instructions supplied with each product.
DO NOT USE these products
as safety or emergency stop
devices or in any other
application where failure of the
product could result in
·
Failure to comply with these instructions could result in death or serious
injury.
personal injury.
Failure to comply with these
instructions could result in
death or serious injury.
Sensing and Control
Micromachined Silicon Pressure Sensors
Uncompensated and
Compensated and Calibrated
XSXL/XSX and XSCL/XSC Electrical Specifications at 12 ±0.01 Vdc Excitation @ 25 °C*
XSXL, XSX,
XSCL, XSC Series
XSXL and XSX
XSCL and XSC
Min.
3.0
Typ.
Max.
16.0
Min.
3.0
Typ.
Max.
16.0
+1.0
Units
Vdc
Excitation Voltage
Null
12.0
0
12.0
0
-120
+120
-1.0
mV
Offset Temperature Shift
--
--
--
--
mV
(0 °C to 70 °C)**
±0.5
±1.0
Full Scale Temperature Shift
-2050
--
--
--
--
% Span
% Span
kW
(0 °C to 70 °C)**
PPM/°C
±2
1.0
--
Linearity, Hysteresis Error*** --
0.25
--
1.0
--
--
0.25
--
Input Resistance
5.0
5.0
--
Output Resistance
Operating Temperature
Storage Temperature
Common Mode Pressure
Proof Pressure
--
3.0
--
--
3.0
--
--
kW
-25
-40
+85
+125
50
--
-25
-40
+85
+125
50
--
°C
--
--
°C
psi
3X
--
3X
--
FS
Proof Pressure XSXL/XSCL
Burst Pressure
100
5X
100
5X
in H2O
FS
--
2
--
--
2
--
Weight
gram
*Note 1:
All parameters are measured at 12 Vdc excitation, pressure specs obtained with pressure applied to the front of the sensor.
**Note 2:
Shift is relative to 25 °C
***Note 3: Measured at ½ full scale rated pressure using BFSL
XSX/XSC Absolute Output at 12 Vdc ±0.01 Excitation @ 25 °C
FS Pressure
XSX Output Full Scale Span, (mV)
XSC Output Full Scale Span, (mV)
(psi)
5
Min.
270
405
405
454
504
450
324
Typ.
420
630
630
634
708
630
612
Max.
540
810
810
813
912
810
900
Min.
57
85
85
85
95
--
Typ.
60
90
90
90
100
--
Max.
63
15
95
30
95
60
95
100
150
300
105
--
--
--
--
XSXL/XSX and XSCL/XSC Gage and Differential* Output at 12 Vdc ±0.01 Excitation @ 25 °C
FS Pressure
XSXL/XSX Output Full Scale Span, (mV)
XSCL/XSC Output Full Scale Span, (mV)
(psi)
4 in H2O
10 in H2O
1
Min.
50
Typ.
68
Max.
86
Min.
23
19
17
57
85
85
85
95
85
--
Typ.
25
20
18
60
90
90
90
100
90
--
Max.
27
22
42
62
21
96
180
420
630
630
634
708
630
612
204
540
810
810
813
912
810
900
19
5
270
405
406
454
504
450
324
63
15
95
30
95
60
95
100
150
300
105
95
--
*Differential Common Mode pressure should not exceed 50 psi
2 Honeywell · Sensing and Control
Micromachined Silicon Pressure Sensors
Uncompensated and
Compensated and Calibrated
XSXL, XSX,
XSCL, XSC Series
MOUNTING DIMENSIONS (for reference only) mm/in
XSXL/XSX AND XSCL/XSC Series
XSC Ceramic without Port
XSC Ceramic with Port (F)
EQUIVALENT CIRCUIT
MEDIA COMPATIBILITY
P1 Port: Dry Gases Only.
Media must be compatible
with epoxy based adhesive
P2 Port: Media must be
compatible with nylon
housing, epoxy adhesive
and silicon.
3
4
2
1
PIN DESIGNATIONS
1. –V Excitation
2. + Output Signal
3. + V Excitation
4. – Output Signal
XSCL/XSC Differential Port
Honeywell · Sensing and Control 3
Micromachined Silicon Pressure Sensors
Uncompensated and
Compensated and Calibrated
XSXL, XSX,
XSCL, XSC Series
XSXL/XSX and XSCL/XSC Series Order Guide
(Not all product combinations are released.)
04
G
XSX
L
B
F
C
Accuracy Grade
C - Commercial
Series
XSX -- uncompensated and uncalibrated, mV
Port Option
F - Axial
XSC -- Motorola, compensated and calibrated, mV
T - Radial
FS - Offset Axial1
Pressure Measurement
L - Low Pressure (in H2O)
No Character - Indicates Pressure (psi)
Port Operation1
B - Backside
Pressure Range
Pressure Reference
04 in H 0, 10 in H2O
2
G - Gage
01, 05, 15, 30, 60, 100, 150 300 psi
D - Differential
A - Absolute > 5 psi
NOTE 1: Option available in Ported Gage Version Only
WARRANTY/REMEDY
Specifications may change
without notice. The information
we supply is believed to be
For application assistance,
Honeywell warrants goods of
its manufacture as being free of
defective materials and faulty
workmanship. Contact your local
sales office for warranty
information. If warranted goods
are returned to Honeywell during
the period of coverage,
Honeywell will repair or replace
without charge those items it
finds defective. The foregoing is
Buyer’s sole remedy and is in
lieu of all other warranties,
expressed or implied,
current specifications, or name of
the nearest Authorized
Distributor, contact a nearby
sales office. Or call:
1-800-537-6945 USA
1-800-737-3360 Canada
1-815-235-6847 International
FAX
1-815-235-6545 USA
INTERNET
www.honeywell.com/sensing
info.sc@micro.honeywell.com
accurate and reliable as of this
printing. However, we assume
no responsibility for its use.
While we provide application
assistance personally, through
our literature and the Honeywell
web site, it is up to the customer
to determine the suitability of the
product in the application.
including those of
merchantability and fitness for
a particular purpose.
Sensing and Control
Honeywell
11 West Spring Street
Freeport, Illinois 61032
Printed with Soy Ink
on 50% Recycled Paper
Copyright ã 1998 - 2001 by Honeywell Data Instruments Inc. All rights reserved.
008056-2-EN IL50 GLO 0801 Printed in USA
www.honeywell.com/sensing
©2020 ICPDF网 联系我们和版权申明