ZD30S20A01_技术文档

2

MICRO SWITCH™ Sealed

Subminiature Basic Switches

ZD Series

Datasheet

MICRO SWITCH™ ZD Series

Sealed Subminiature Basic Switches

Honeywell’s MICRO SWITCH™ ZD Series is a sealed subminiature snap action switch. Although small in size, the ZD

Series is rated for controlling electrical loads ranging from logic-level (low current, low voltage) to limited power-duty

switching (up to 3 A/125 Vac).

The switch when provided with integral wire leads is sealed to IP67 and is suitable for applications where the switch

assembly would be exposed to liquids or particulate contaminates in the environment.

A wide variety of stainless steel levers are available, and when combined with the subminiature package size, can

adapt the switch for many different applications. The ZD Series is certiﬁed to UL, cUL, ENEC, and CQC for

worldwide use.

What makes our switches better?

The IP67-rated ealed switch is designed to operate in a

variety of demanding applications, reducing the challenge of

harsh environments

Current carrying capacity, up to 3 A, allows for a solution in

many applications where space is a premium

Switch package designed to accommodate demanding

temperature requirements, up to 85 °C [185 °F]

Available for worldwide

applications.

RIGHT SWITCH FOR THE RIGHT APPLICATION

HARSH ENVIRONMENTS • RELIABILITY • ELECTRICAL RATING

sensing.honeywell.com

2

SMALL PACKAGE SIZE

Features

and Beneﬁts

Subminiature package size allows the MICRO SWITCH™ ZD Series switch to fit

in applications where other sensors or switches are too large.

IP67 sealing: pre-wired switches

WELL SUITED FOR POWER-DUTY AND LOGIC-LEVEL LOADS

SPDT, SPNC, or SPNO switch options help assure the circuit requirements are

met. The ZD Series can control limited power-duty switching with silver contacts

or logic-level (low voltage, and milliamperes) with gold-plated contacts.

PERFORMS IN WET, DIRTY, AND DUSTY ENVIRONMENTS

Catalog listings with pre-leaded wires are sealed to IP67 for use in environments

where exposure to liquid ingress or particulate contaminant could occur.

DESIGN FLEXIBILITY

Switches are built with an integral sealed pin plunger. Various styles of levers

expand the versatility of the ZD Series in the application. In addition, the ZD

Series features a variety of terminations to promote flexibility for the electrical

connectivity.

SIMPLIFIED INSTALLATION

Integral mounting pins (pillars) on the switch housing simplify and reduce

installation time.

Potential Applications

TRANSPORTATION

Electric window control for automobiles

Automobile seat belt latch detection

Engine hood or trunk latch detection

Vehicle door latch detection

Vehicle mounted wheelchair lifts

sensing.honeywell.com

3

ZD Series

PRODUCT NOMENCLATURE

A

3

0

10

0

S

—

ZD

20

Operating

Actuator

Type

Pillar

Wire

Size

Wire

Terminal

Type

Circuitry

Special

Designator

A special designator

is used to

indicate non-standard

feature, such

as a special actuator,

wire color, wire length,

connector, etc. This

code will consist of

three alphanumeric

characters.

Current

Rating

Force³

& Travel⁹

Type⁶

Switch Type

(at pin plunger)

ZD Series

Subminiature

Basic

No pillar,

short travel

Terminal

option (blank)

Terminal

option (blank)

10 mA,

12 Vdc

Wired (blank)⁴

Pin plunger

SPDT

A

0

130 g max.

20

1

2

S

20 AWG

(standard)

UL1007

(standard)

Special formed

lever, 13,7 mm

Left pillar,

short travel

3 A 12 Vdc

3 A 125 Vac

Solder

SPNO⁵

SPNC⁵

E

F

A

C

D

F

3

4

10

30

B

C

H

J

(2,5 mm x 1,70 mm)

Switch

PCB, straight

Straight lever,

15 mm

Right pillar,

short travel

22 AWG

24 AWG

26 AWG

UL1430

UL1061

20 ^{(0,6 mm x 2.5 mm)}

3

PCB,

right angle

Sim. roller lever,

18,6 mm

No pillar,

long travel

50

G

H

R: indicates wire

exit opposite

4

Left pillar,

long travel

AVSS⁸

(automotive)

PCB,

left angle

Long straight

lever, 23 mm

plunger

60

L: indicates wire

exit plunger

5

Sim. roller lever,

14,4 mm

end

Long solder⁷

Right pillar,

long travel

70

K

M

N

S

6

Special formed

lever, 15 mm

No pillar, w/

mntng hole tab,

long travel

SPECIAL²

99

7

Sim. roller

lever, 17 mm

No pillar, w/

mntng hole tab,

short travel

8

Short pillar

& mnting hole

long travel

SPECIAL²

9

Short pillar

& mnting hole

short travel

10

11

12

99

Left &

right pillar

short travel

Left &

right pillar

long travel

SPECIAL²

NOTES:

¹Not all combinations of model code are available. Please contact your Honeywell provider/representative for assistance.

²Terminal Type “99”, Actuator Type “S”, and/or Pillar/Travel Type “99” designates a special and requires a special designation at the end of the listing.

³Operate force is measured at the plunger. Adding an actuator/lever will change the operate force. See page 6 for operate force.

⁴Standard wire exit is out the bottom of the switch. No special designator is necessary for this wire exit direction.

⁵SPNO and SPNC are only available if termination type is wired.

⁶Standard wire length is 500 mm [19.5 in] long. Other lengths available upon request.

⁷Long solder terminals do not have UL or ENEC approvals.

⁸Switches with AVSS wire do not have UL approvals.

⁹Long and short travel pertain to plunger travel distance. Short travel has a taller boss around the plunger to limit overtravel.

sensing.honeywell.com

4

MICRO SWITCH™ Sealed Subminiature Basic Switches

Table 1. Specifications

Characteristic

ZD20S Series (Logic Level)

ZD30S Series (Power Duty)

SPDT, SPNC, SPNO

(Note: SPNC and SPNO prewired only)

SPDT, SPNC, SPNO

(Note: SPNC and SPNO prewired only)

Circuitry

Operating force

Termination

Sealing

130 g max. @ plunger

PCB, solder, prewired

130 g max. @ plunger

PCB, solder, prewired

IP67 (prewired), IP00 for exposed terminals

Actuators (levers 300 series

stainless steel)

pin plunger, flat lever, formed lever,

simulated roller lever, special lever

pin plunger, flat lever, formed lever,

simulated roller lever, special lever

Agency certification

UL, cUL, ENEC, CQC, RoHS compliant

Operating temperature

(manufacturer rated)

-40 °C to 85 °C [-40 °F to 185 °F]

Mechanical endurance (cycles)

Electrical endurance (cycles)

Switch resistance (initial)

500,000 min. @ 120 cycles per min. max.

Up to 500,000 @ 30 cycles/minute max.

100 mΩ max.

500,000 min. @ 120 cycles per min. max.

Up to 100,000 @ 30 cycles/minute max.

100 mΩ max.

Insulation resistance (initial)

100 MΩ min. (500 Vdc for one minute)

500 VRMS for one minute

< 0.5 mA leakage current

500 VRMS for one minute

< 0.5 mA leakage current

Dielectric strength (initial)

(between live parts and ground)

Plunger seal

silicone

silver

Contact material

Housing material

gold-plated silver

case, polyamide (nylon); cover, PBT polyester

Note: Refer to engineering drawing for additional information.

Table 2. Electrical Ratings

CQC (Asia-Pacific)

Per GB 15092-1

ENEC (Europe)

Per IEC 61058-1

UL, cUL (Americas)

UL 61058-1, File 12252

Switch option

ZD20S Series

(Gold-plated contacts)

0.01 A, 12 Vdc,

500,000 cycles

0.01 A to 0.1 A, 12 Vdc

100,000 cycles

0.01 RA to 0.1 RA, 12 Vdc

10,000 cycles

ZD30S Series

(Silver contacts)

3 A, 12 Vdc, 100,000 cycles

3 A, 125 Vac, 10,000 cycle

3 A, 12 Vdc, 100,000 cycles

3 A, 125 Vac, 10,000 cycles

3 RA, 12 Vdc, 100,000 cycles

3 RA 125 Vac, 10,000 cycles

Note: UL, cUL; CQC and ENEC “use temperature”; 0 °C to 55 °C [32 °F to 131 °F].

sensing.honeywell.com

5

O.F. • Operating force

R.F. • Release force

P.T. • Pretravel

O.T. • Overtravel

D.T. • Differential travel

O.P. • Operating position

ZD Series

PRODUCT SPECIFICATIONS AND LISTINGS

Contact your Honeywell rep or distributor for additional listings

Free Position

max. mm [in]

Elect.

Rating

Spec.

Circuitry/

Catalog

Listing

Operate

Release

No hole or pillar,

Actuator

Contact

Material

Termination

Force max. Force min.

from top of

switch

(see page 8)

N [Gm]

(page 4)

SPDT/

Gold Plated

ZD20S10A01

Pin plunger

0.1 A

3 A

Solder

PCB

1,27 [130]

0,34 [35]

3,65 [0.14]

SPDT/

Gold Plated

ZD20S10A02

ZD20S20A01

ZD20S20A02

ZD20S20A03

ZD20S20A04

ZD20S20A05

ZD20S20A06

ZD20SA01EA

ZD20SA02EA

ZD30S10A01

ZD30S10A02

ZD30S20A01

ZD30S20A02

ZD30S20A03

ZD30S20A04

ZD30S20A05

ZD30S20A06

ZD30SA01EA

ZD30SA02EA

–

SPDT/

Gold Plated

–

SPDT/

Gold Plated

–

SPDT/

Gold Plated

–

SPDT/

Gold Plated

–

SPDT/

Gold Plated

–

SPDT/

Gold Plated

–

SPDT/

Gold Plated

Wire leads, bottom

exit, 500 mm

3,65 [0.14]

SPDT/

Gold Plated

Wire leads, bottom

exit, 500 mm

–

SPDT/

Silver

Solder

PCB

3,65 [0.14]

SPDT/

Silver

3 A

–

SPDT/

Silver

3 A

–

SPDT/

Silver

3 A

–

SPDT/

Silver

3 A

–

SPDT/

Silver

3 A

–

SPDT/

Silver

3 A

–

SPDT/

Silver

3 A

–

SPDT/

Silver

Wire leads, bottom

exit, 500 mm

3 A

3,65 [0.14]

SPDT/

Silver

Wire leads, bottom

exit, 500 mm

Pin plunger

Simulated

3 A

SPDT/

ZD20S20H02

ZD30S60N05

0.1 A

3 A

PCB

1,57 [160]

1,96 [200]

0,44 [45]

0,49 [50]

–

roller leaf lever Gold Plated

Simulated

roller leaf lever

SPDT/

Silver

PCB (left side)

Straight leaf

lever

SPDT/

Silver

ZD30S60C05

ZD30SC02EA

3 A

PCB (left side)

1,91 [195]

0,54 [55]

–

Straight leaf

lever

SPDT/

Silver

Wire leads, bottom

exit, 500 mm

sensing.honeywell.com

6

O.F. • Operating force

R.F. • Release force

P.T. • Pretravel

MICRO SWITCH™ Sealed Subminiature Basic Switches

O.T. • Overtravel

D.T. • Differential travel

O.P. • Operating position

Operate point

Free Position

max. mm [in]

Free Position

max. mm [in]

Operate point

mm [in]

Operate point

mm [in]

No hole or

pillar, from top

of switch

P.T. max.

mm [in]

O.T. min.

mm [in]

D.T. max.

mm [in]

from mounting from base for

hole or pillar

(see page 8)

PCB terminal

(see page 8)

hole or pillar

(see page 8)

PCB terminals

(see page 8)

3,05 0,2

[0.12 0.008]

–

0,80 [0.03]

0,3 [0.01]

6,75 0,2

[0.27 0.008]

7,35 [0.29]

–

10,55 0,2

[0.42 0.008]

11,15 [0.44]

–

6,75 0,2

[0.27 0.008]

10,55 0,2

[0.42 0.008]

7,35 [0.29]

–

6,75 0,2

[0.27 0.008]

10,55 0,2

[0.42 0.008]

10,55 0,2

[0.42 0.008]

–

6,75 0,2

[0.27 0.008]

10,55 0,2

[0.42 0.008]

7,35 [0.29]

–

6,75 0,2

[0.27 0.008]

10,55 0,2

[0.42 0.008]

3,05 0,2

[0.12 0.008]

–

6,75 0,2

[0.27 0.008]

7,35 [0.29]

–

3,05 0,2

[0.12 0.008]

–

6,75 0,2

[0.27 0.008]

7,35 [0.29]

–

10,55 0,2

[0.42 0.008]

11,15 [0.44]

–

6,75 0,2

[0.27 0.008]

10,55 0,2

[0.42 0.008]

7,35 [0.29]

–

6,75 0,2

[0.27 0.008]

10,55 0,2

[0.42 0.008]

10,55 0,2

[0.42 0.008]

–

6,75 0,2

[0.27 0.008]

10,55 0,2

[0.42 0.008]

7,35 [0.29]

–

6,75 0,2

[0.27 0.008]

10,55 0,2

[0.42 0.008]

3,05 0,2

[0.12 0.008]

–

6,75 0,2

[0.27 0.008]

7,35 [0.29]

–

9,90 0,8

[0.39 0.03]

13,7 0,2

[0.54 0.008]

13,80 [0.53]

14,40 [0.57]

17,60 [0.69]

18,20 [0.72]

4,80 [0.19]

4,40 [0.17]

1,65 [0.06]

1,45 [0.06]

0,7 [0.03]

0,5 [0.02]

17,70 0,70

[0.70 0.03]

21,50 0,70

[0.85 0.03]

–

7,40 0,2

[0.29 0.01]

11,20 0,2

[0.44 0.01ꢀ

10,70 [0.42]

14,50 [0.57]

–

3,85 [0.15]

1,35 [0.05]

0,5 [0.02]

7,40 0,2

[0.29 0.01]

–

sensing.honeywell.com

7

ZD Series

MOUNTING DIMENSIONS

PACKAGE DIMENSIONS

2X 1,80

[0.071]

14,70

5,40

[0.579]

[0.213]

7,50

4X 5,00

[0.197]

[0.295]

2,60

9,53 0,15

[0.375 0.006]

3,10

[0.122]

[0.102]

2,80

19,75

[0.110]

[0.778]

Ø2,60 0,20

[0.102 0.008]

3,70

[0.146]

2X Ø 2,50 0,20

[0.098 0.008]

Ø2,21 0,20

[0.087 0.008]

6,00

[0.236]

TRAVEL OPTIONS

3,85

[0.152]

9,05

8,10

Ø3,30 0,15

[0.130 0.006]

[0.356]

[0.319]

2,50

[0.098]

STANDARD PILLAR DIMENSIONS FOR

ALL TYPES OTHER THAN 9 AND 10

(OTHER PILLAR DIAMETERS AND LENGTHS AVAILABLE UPON REQUEST

PILLAR OPTION 9 AND 10

LONG TRAVEL

SHORT TRAVEL

STRAIGHT

TYPE 10

RIGHT

TYPE 50

TYPE 60

3,00 1,00

[0.118 0.040]

COM

12,00 [0.470] SPST

17,00 [0.669] SPDT

1,70

NO

NC

12,00

NO

NC

NC (GRAY)

[0.067]

[0.472]

3X 0,60 0,10

[0.024 0.004]

NO (BLUE)

COM (BLACK)

NC NO COM

[0.098]

3X 2,50

500 MIN

[19.5]

[0.127]

3,22

3X 0,60 0,10

[0.024 0.004]

4,13

[0.163]

WIRE ENDS TINNED WITH

ROHS COMPLIANT SOLDER

[0.163]

500 MIN

[19.5]

1,80 0,30

[0.071 0.012]

TYPE 20

1,80 0,30

[0.071 0.012]

LEFT

500 MIN

[19.5]

3,00 1,00

[0.118 0.040]

3,00 1,00

[0.118 0.040]

2,50

[0.098]

2,85

[0.112]

NC (GRAY)

NO (BLUE)

NC

NO COM

COM (BLACK)

1,97

[0.078]

3X 0,60 0,10

[0.024 0.004]

PLUNGER POSITION

COM

NO

NC

TYPE 70

5,08 0,ꢀ0

3X Ø1,50 1,35

[0.059 0.053]

[0.20 0.00ꢁ4

10,16 0,10

[0.40 0.004]

THRU HOLE SIZE RECOMMENDATIONS

AND SPACINGS FOR PCB TERMINALS

3,50

1,70

[0.138]

[0.067]

Unless otherwise specified, a tolerance of 0,4 mm [0.02 in] applies to all dimensions.

All terminals are 0,5 mm 0,05 mm [0.02 in 0.002 in] thick.

NC

NO COM

3XØ1,30

[0.051]

3,22

[0.127]

3X 2,50

[0.098]

4,13

[0.163]

4,13

[0.163]

R1.30

[.051]

ACTUATOR TYPES

TYPE A

12,20

TYPE B

TYPE C

TYPE H

TYPE J

PT

1,87

PT

[0.480]

18,60

15,00

13,30

[0.524]

[0.074]

23.00

PT

Ø

[0.732]

2,00

[0.590]

FP

[0.905]

[0.079]

FP

OP

FP

OP

FP

OP

2,09

[0.082]

2,09

[0.082]

2,09

[0.082]

R2,00

TYPE K

TYPE M

TYPE N

R2,00

[0.079]

PT

[0.079]

PT

17,00

[0.669]

PT

14,40

[0.567]

12,81

3,50

3,27

[0.504]

[0.138]

[0.129]

FP

OP

FP

5,60

[0.221]

OP

2,09

[0.082]

sensing.honeywell.com

8

ADDITIONAL INFORMATION

WARNING

PERSONAL INJURY

The following associated literature is available on the Honeywell web

site at sensing.honeywell.com:

DO NOT USE these products as safety or emergency stop

devices or in any other application where failure of the

product could result in personal injury.

• Product installation instructions

• Product range guide

• Product nomenclature tree

• Product application-specific information

Failure to comply with these instructions could result in

death or serious injury.

– Application note: Sensors and switches for potential HVAC/R

applications

WARNING

– Application note: Sensors and switches for potential medical

applications

MISUSE OF DOCUMENTATION

•

The information presented in this product sheet is for

reference only. Do not use this document as a product

installation guide.

– Application note: Watertight switches in transportation

applications

•

Complete installation, operation, and maintenance

information is provided in the instructions supplied with

each product.

– Technical bulletin: Applying precision switches

– Technical bulletin: Low energy switch guide

Failure to comply with these instructions could result in

death or serious injury.

WARRANTY/REMEDY

Honeywell warrants goods of its manufacture as being free of

defective materials and faulty workmanship. Honeywell’s standard

product warranty applies unless agreed to otherwise by Honeywell

in writing; please refer to your order acknowledgement or consult

your local sales office for specific warranty details. If warranted

goods are returned to Honeywell during the period of coverage,

Honeywell will repair or replace, at its option, without charge those

items it finds defective. The foregoing is buyer’s sole remedy

and is in lieu of all other warranties, expressed or implied,

including those of merchantability and fitness for a particu-

lar purpose. In no event shall Honeywell be liable for conse-

quential, special, or indirect damages.

Find out more

Honeywell serves its customers

through a worldwide network

of sales offices, representatives

and distributors. For application

assistance, current specifications,

pricing or name of the nearest

Authorized Distributor, contact

your local sales office.

While we provide application assistance personally, through our

literature and the Honeywell website, it is up to the customer to

determine the suitability of the product in the application.

To learn more about Honeywell’s

sensing and switching products,

call +1-815-235-6847 or

1-800-537-6945,

Specifications may change without notice. The information we

supply is believed to be accurate and reliable as of this printing.

However, we assume no responsibility for its use.

visit sensing.honeywell.com,

or e-mail inquiries to

info.sc@honeywell.com

Sensing and Productivity Solutions

Honeywell

1985 Douglas Drive North

004988-2-EN IL50 GLO

February 2016

Golden Valley, MN 55422

honeywell.com


型号：	ZD30S20A01
厂家：	Honeywell
描述：	Snap Acting/Limit Switch, SPDT, Momentary, 3A, 12VDC, Solder Terminal, Pin Plunger Actuator, Through Hole-straight, 开关光电二极管
文件：	总9页 (文件大小：3488K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

ZD30S20A01 [HONEYWELL]

相关型号：

ZD30S20A04

ZD30S20C01

ZD30S20C02

ZD30S20C03

ZD30S20C04

ZD30S20C05

ZD30S20C06

ZD30S20H01

ZD30S20H02

ZD30S20H03

ZD30S20H05

ZD30S20H06