ZS-00370-01 [HONEYWELL]

Analog Circuit;
ZS-00370-01
型号: ZS-00370-01
厂家: Honeywell    Honeywell
描述:

Analog Circuit

文件: 总3页 (文件大小:108K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Interactive Catalog Replaces Catalog Pages  
Honeywell Sensing and Control has replaced  
the PDF product catalog with the new  
Interactive Catalog. The Interactive Catalog is  
a power search tool that makes it easier to find  
product information. It includes more  
installation, application, and technical  
Click this icon to try the new  
information than ever before.  
Interactive Catalog.  
These PDF files are no longer being updated  
and will be removed by January 2001.  
Sensing and Control  
Honeywell Inc.  
11 West Spring Street  
Freeport, Illinois 61032  
ZS-00370-01  
ONE PART 15/32” PROXIMITY SENSOR  
Description :  
Environment-proof self-contained proximity sensor enclosed in a  
rugged hermetically sealed ceramic/stainless steel housing, designed  
to meet the requirements of aerospace applications.  
Operation by the Eddy Current Killed Oscillator (ECKO) principle, which  
is used to detect metallic objects passing in front of the sensing face.  
Once a target metal is detected, a trigger signal is produced which is  
then passed through the output conditioning circuitry to give a high or  
low output, depending on the sensor application.  
Features :  
l All metal sensing  
l Integral MIL-C 26482 connector  
l High level EMC and lightning strike performance  
l High level of electronics protection  
Typical Applications :  
Dimensions in mm (for reference only)  
l Aircraft landing gear  
l Flight control surfaces  
l Aircraft door monitoring  
MEASURED WITH TARGET 12x12x1mm 1.0110, ST 37  
REFERS TO OUTPUT SWITCHING ELEMENT AT  
REMOTE TARGET CONDITION  
ACC. TO ZS-60000 (HONEYWELL GENERAL SPECIFICATION  
FOR PROXIMITY SWITCHES) IF NOT OTHERWISE NOTED  
HOUSING AND MOUNTING NUTS: STAINLESS STEEL 1.4305  
CONNECTOR: NICKEL PLATED ALUMINIUM  
MARKING: ZS-00370-01  
SENSING FACE: 96% AL O3 CERAMIC  
2
WEIGHT < 60g  
26  
Specifications  
Sensing Characteristics :  
Switching function  
Level  
Normally open, current source  
2.5 mm  
Specification (Note 1)  
Note 2  
Nominal sensing distance  
Effective sensing distance  
Differential travel  
2.25 to 2.75 mm  
1 to 10 %  
Guaranteed actuation distance  
Guaranteed deactuation distance  
Reproduceability  
2.10 mm  
3.50 mm  
1 %  
Repetition rate of sensing  
Power on delay  
2000 Hz Max  
10 ms  
Electrical Specifications :  
Power Supply -  
Supply voltage  
14 to 32.5 V  
1.4 V /0.01-200kHz  
46 V in 100 ms  
600 V at 5 µs  
ABD 0013, 6-1.6-2.6-3-4  
ABD 0013, 6-4  
Ripple voltage  
Surge voltage  
ABD 0013, 6-3-1  
ABD 0013, 6-3-3  
Voltage spikes  
Current consumption w/o load  
Dielectric strength  
Insulation resistance  
Output -  
10 mA  
> 500 V  
ABD 0007, 2-3.7.1  
ABD 007, 2-3.7.2  
> 100 MOhm at 45 V  
On state output voltage  
Load current  
1.65 V at 250 mA  
250 mA to +20° C LIN FALLING to 200 mA at +85° C  
100 µA  
Off state leakage current  
Short circuit protection  
Yes  
Environmental Specifications :  
Operating temperature range  
Storage temperature  
Altitude/pressure  
Water  
-55° to +85° C  
-65° to +85° C  
-302 m to 13,060 m  
Category R  
RTCA/DO-160C, 4.3  
IEC 68-2-8/68-2-2  
ABD 0007, 3-3  
RTCA/DO-160C, 10.2  
ABD 0007, 3-7  
Category S  
Salt mist  
Vibration  
Category 6 (D/R)  
6 g/11ms  
ABD 0007, 3-9.2  
ABD 0007, 3-11.1  
ABD 0007, 3-12.3  
ABD 0007, 3-13  
Shock  
Constant acceleration  
Fungi  
6.5 gn  
Category F  
Pollution  
Engine and gearbox oil, aviation fuel, sea water, water,  
ethanol, methanol  
Clause 14.3  
DEF 133  
Magnetic effects  
Category A  
ABD 0007, 3-17.2  
EMC Requirements :  
AF conducted susceptibility  
Induced signal susceptibility  
RF susceptibility  
Category A  
Category A  
Category W  
Category A  
Category M  
RTCA/DO-160C, 18  
RTCA/DO-160C, 19  
RTCA/DO-160C, 20  
RTCA/DO-160C, 21  
RTCA/DO-160C, 22  
RF emission  
Lightning induced transit susceptibility  
Mean Time Between Failure prediction  
120000 hrs  
MIL-HDBK-217 E  
Notes :  
1. Unless otherwise stated, tested to or by similarity to Honeywell internal specifications  
2. Refers to output switching element at remote target condition  
Ordering guide  
Listing  
Description  
Normally open, current source  
ZS-00370-01  
27  

相关型号:

ZS-00380-01

Inductive Sensor
HONEYWELL

ZS-00380-02

Inductive Sensor, 0.035-2.5V, Rectangular, Through Hole Mount
HONEYWELL

ZS-00380-04

Inductive Sensor,
HONEYWELL

ZS-00395-05

Analog Circuit
HONEYWELL

ZS-00417-02

Inductive Sensor, 1mm Min, 1.99mm Max, Cylindrical
HONEYWELL

ZS-00424-01

Inductive Sensor, 3mm Min, 3.99mm Max, Cylindrical,
HONEYWELL

ZS-00427-01

Inductive Sensor, 5.08mm Min, 9.398mm Max, 1.4V, Rectangular
HONEYWELL

ZS-00434-01

Inductive Sensor, 2mm Min, 2.99mm Max, Cylindrical
HONEYWELL

ZS-00445-050

Inductive Sensor, 4mm Min, 4.99mm Max, Cylindrical,
HONEYWELL

ZS-00459-050

Inductive Sensor, 5mm Min, 10mm Max,
HONEYWELL

ZS-26-F

Pressure Sensor Series PSE530
ETC

ZS-27-C

High Precision, 2-color Display Digital Pressure Switch
ETC