ZW50F92CW4-A [HONEYWELL]
MICRO SWITCH⢠Sealed Subminiature Basic Switches;
| 型号： | ZW50F92CW4-A |
| 厂家： | 
Honeywell |
| 描述： | MICRO SWITCH⢠Sealed Subminiature Basic Switches |
| 文件： | 总9页 (文件大小：2261K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MICRO SWITCH™ Sealed
Subminiature Basic Switches
ZW Series
Datasheet
MICRO SWITCH™ ZW Series
Sealed Subminiature Basic Switches
Honeywell’s MICRO SWITCH™ ZW Series is a sealed subminiature snap action switch from the Honeywell family of
Z Series subminiature basic switches. Although small in size, the ZW Series is rated for controlling electrical loads
ranging from logic level/computer-based circuits to power-duty switching (up to 6 amps and up to 250 Vac).
Switches supplied with integral wire leads are sealed to IP67 and are suitable for applications where a switch
assembly would be exposed to liquids or particulate contaminates in the environment from indoor or outdoor use.
A wide variety of stainless steel levers are available and when combined with the subminiature package size,
can adapt the switch for many different applications. The ZW Series is certified to UL, cUL, ENEC, and CQC for
worldwide use.
What makes our switches better?
The IP67-rated sealed switch is designed to operate in a
variety of demanding applications, reducing the challenge of
harsh environments
Wide variety of electrical current carrying capacity allows for
a solution in many systems
Switch package designed to accommodate a wide range of
temperature requirements
For worldwide use...
RIGHT SWITCH FOR THE RIGHT APPLICATION
HARSH ENVIRONMENTS • RELIABILITY • ELECTRICAL RATING
sensing.honeywell.com
2
SMALL PACKAGE SIZE
Features
and Benefits
Subminiature package size allows the MICRO SWITCH™ ZW Series switch to
fit in many applications where other sensors or switches are too large.
IP67 sealing: pre-wired switches
WELL SUITED FOR POWER-DUTY AND LOGIC-LEVEL LOADS
SPDT, SPNC, or SPNO switch options are available and designed to meet various
circuit requirements. ZW Series can control power-duty switching with silver
contacts or logic-level computer-based circuits with gold-plated contacts.
PERFORMS IN WET, DIRTY, AND DUSTY ENVIRONMENTS
Catalog listings with integral lead wires are sealed to IP67 for use in
environments where exposure to liquid ingress or particulate contaminant
could occur.
DESIGN FLEXIBILITY
Switches are built with an integral sealed pin plunger. Various styles of levers
expand the versatility of the ZW Series switch in the application. In addition,
the ZW Series features a variety of terminations to promote flexibility for the
electrical connectivity.
Potential Applications
LAWN TRACTORS
Reverse alarm for lawn tractors
Indicates seat use on lawn tractors
WATERCRAFT
Found on handle-bar controls for personal watercraft (wave runners)
SECURITY SYSTEMS
Acts as an interlock for security system panel
SNOWMOBILES
Found on handle-bar controls for snowmobiles
sensing.honeywell.com
3
ZW Series
PRODUCT NOMENCLATURE
A
ZW
50
F
15
1
D
—
Actuator Type3
Current
Rating
Operating Force4
(at pin plunger)
Terminal
Type
Special
Circuitry
Construction
Switch Type
Designator3
(Levers Mounted Internally)
A special designator
is used to indicate
a non-standard feature,
such as a special
actuator, wire color,
wire length, connector,
etc. This code
ZW Series
Sealed
Subminiature
Basic
0.1A 125/250 Vac
(Gold-plated
contacts)
IP00
Solder
Pin plunger
150 g max.
15
A
D
SPDT
10
50
E
1
Dust tight
6A: 125/250 Vac
(Silver contacts)
Short straight
lever (17,4 mm)
IP67
Water tight
SPNO 2
203 g max.
PCB, straight
F
3
4
20
70
90
91
92
99
B
W
ONLY
Long solder
Switch
Standard straight
lever (19,4 mm)
SPNC 2
consists of up to three
alphanumeric
2,8 mm x 0,5 mm
[0.11 in x 0.02 in]
C
Cable, bottom
exit (500 mm)
characters.
Long straight
lever (25,5 mm)
D
(UL10007 Dia 1.0)4,5
Cable, side exit
(Opposite plunger)
(500 mm) (UL1007 Dia)4,5
Simulated roller
lever (18,7 mm;
R 3,4 mm)
E
F
H
J
S
Cable, side exit
(Plunger end)
(500 mm) (UL1007 Dia)4,5
Roller lever
(17,2 mm;
Ø 4,8 mm)
Small simulated
roller lever
SPECIAL3
(18,6 mm; R1,3 mm)
Long straight
lever (55,9 mm)
SPECIAL
Lever2
NOTES:
1 Not all combinations of model code are available. Please contact your Honeywell provider/representative for assistance.
2 Termination style “99” and/or Actuator Type “S” designates a special and therefore requires a special designator letter at the end of the listing
3 Lever length is measured as follows: Straight lever - from center line of the pivot to the end of the lever; Roller and simulated roller lever - from the center line of the pivot to the center of
the roller diameter. See page 8 for more details.
4 Standard wire length is 500 mm [19.68 in] long. Other lengths are available upon request. Lead wire with end stripped 3,0 mm [0.118 in] and pre-tinned.
COM: black; NC: gray; NO: blue
5 Standard lead wire is UL1007 20 AWG cable. Other lead wire types, such as UL1015, UL1430, UL1061, and AVSS are available upon request.
-
sensing.honeywell.com
4
MICRO SWITCH™ Sealed Subminiature Basic Switches
Table 1. Specifications
Characteristic
Circuitry
ZW10 Series (Logic Level)
SPDT, SPNC, SPNO
ZW50 Series (Power Duty)
SPDT, SPNC, SPNO
Operating force
Termination
Sealing
150 g or 203 g @ plunger
150 g or 203 g @ plunger
PCB, solder, prewired
PCB, solder, prewired
IP67 (prewired), IP00 for exposed terminals
IP67 (prewired), IP00 for exposed terminals
Actuators (levers 300 series
stainless steel)
pin plunger, flat lever, roller lever, sim. roller lever,
special levers
pin plunger, flat lever, roller lever, sim. roller lever,
special levers
Agency certification
UL, cUL, ENEC, CQC, RoHS compliant
UL, cUL, ENEC, CQC, RoHS compliant
Operating temperature
(Manufacturer rated)
-40 °C to 120 °C [-40 °F to 248 °F] (terminal)
-20 °C to 70 °C [-4 °F to 158 °F] (pre-wired)
-40 °C to 120 °C [-40 °F to 248 °F] (terminal)
-20 °C to 70 °C [-4 °F to 158 °F] (pre-wired)
Mechanical endurance (cycles)
Switch resistance (initial)
1,000,000 min. @ 120 cycles/minute max.
50 mΩ max. (terminals); 100 mΩ max (pre-wired)
100 MΩ min. (500 Vdc for one minute)
1,000,000 min. @ 120 cycles/minute max.
50 mΩ max. (terminals); 100 mΩ max (pre-wired)
100 MΩ min. (500 Vdc for one minute)
Insulation resistance (initial)
Dielectric strength (initial)
(between live parts and ground)
1500 VRMS for one minute
<0.5 mA leakage current
1500 VRMS for one minute
<0.5 mA leakage current
Plunger seal
silicone
silicone
silver
Contact material
Housing material
gold-plated silver
case, PBT (polyester); cover, PBT (polyester)
case, PBT (polyester); cover, PBT (polyester)
Note: Refer to engineering drawing for additional information.
Table 2. Electrical Ratings
CQC (Asia-Pacific)
Per GB 15092-1
ENEC (Europe)
Per IEC 61058-1
UL, cUL (Americas)
UL 61058-1, File 12252
Switch option
ZW10 Series
(Gold-plated contacts)
0.1 A, 125/250 Vac
10,000 cycles
0.1 A, 250 Vac
10,000 cycles
0.1 RA, 125/250 Vac
10,000 cycles
ZW50 Series
(Silver contacts)
6 A, 125/250 Vac
10,000 cycles
6 A, 250 Vac
10,000 cycles
5 RA, 125/250 Vac
10,000 cycles
Note: The agency “use temperature” for solder or PCB terminals: 0 °C to 120 °C [32 °F to 248 °F];
CQC/ENEC “use temperature” for wire leads: 0 °C to 70 °C [32 °F to 158 °F].
UL/cUL “use temperature” for wire leads: 0 °C to 55 °C [32 °F to 131 °F].
sensing.honeywell.com
5
ZW Series
O.F. • Operating force
R.F. • Release force
P.T. • Pretravel
O.T. • Overtravel
D.T. • Differential travel
O.P. • Operating position
PRODUCT SPECIFICATIONS AND LISTINGS
Contact your Honeywell rep or distributor for additional listings
Elect.
Rating
Spec.
(page 5)
Circuitry/
Contact
Material
O.F. max.
N [g]
Catalog Listing
Actuator
Termination
SPDT/
Gold plate
ZW10F20AD1
ZW10F90AW1
ZW50F15AD1
ZW50F90AW1
Pin plunger
Pin plunger
Pin plunger
Pin plunger
Pin plunger
0.1 A
0.1 A
6 A
PCB
2,00 N [203 g]
SPDT/
Gold plate
Wire leads, bottom exit
(500 mm)
2,00 N [203 g]
2,00 N [203 g]
2,00 N [203 g]
SPDT/
Silver
Solder
SPDT/
Silver
Wire leads, bottom exit
(500 mm)
6 A
Pin plunger
SPNO/
Silver
Wire leads, side exit,
plunger side (500 mm)
ZW50F92AW3
ZW10E15CD1
ZW50F90CW3
ZW50F92CW3
6 A
0.1 A
6 A
2,00 N [203 g]
0,54 N [55 g]
0,65 N [66 g]
0,65 N [66] g
Standard straight lever,
19,4 mm [0.76 in]
SPDT/
Gold plate
Solder
Standard straight lever,
19,4 mm [0.76 in]
SPNO/
Silver
Wire leads, bottom exit
(500 mm)
Standard straight lever,
19,4 mm [0.76 in]
SPNO/
Silver
Wire leads, side exit,
plunger side (500 mm)
6 A
Std. straight lever
Long straight lever
Long straight lever,
25,5 mm [1.0 in]
SPDT/
Silver
Wire leads, bottom exit
(500 mm)
ZW50F90DW1
ZW50F90JW1
6 A
6 A
0,53 N [54 g]
0,32 N [33 g]
Longer straight lever,
52,9 mm [2.20 in]
SPDT/
Silver
Wire leads, bottom exit
(500 mm)
Sim. roller lever,
18,65 mm [0.73 in]
radius: 3,4 mm [0.13 in]
SPNO/
Silver
Wire leads, bottom exit
(500 mm)
ZW50F90EW3
6 A
0,68 N [69 g]
Sim. roller lever
Sim. roller lever
Small radius, sim. roller lever,
18,6 mm [0.73 in]
radius: 1,3 mm [0.05 in]
SPDT/
Silver
Wire leads, bottom exit
(500 mm)
ZW50F90HW1
ZW50F91HW1
6 A
6 A
0,67 N [68 g]
0,67 N [68 g]
Small radius, sim. roller lever,
18,6 mm [0.73 in]
radius: 1,3 mm [0.05 in]
Wire leads, side exit,
opposite plunger
(500 mm)
SPDT/
Silver
Roller lever,
17,2 mm [0.68 in]
SPDT/
Gold plate
ZW10E70FD1
ZW10E90FW1
ZW50F90FW1
0.1 A
0.1 A
6 A
Solder (long terminal)
0,59 N [60 g]
0,59 N [60 g]
0,71 N [72 g]
Roller lever
17,2 mm [0.68 in]
SPDT/
Gold plate
Wire leads, bottom exit
(500 mm)
Roller lever
17,2 mm [0.68 in]
SPDT/
Silver
Wire leads, bottom exit
(500 mm)
Roller lever
sensing.honeywell.com
6
MICRO SWITCH™ Sealed Subminiature Basic Switches
O.F. • Operating force
R.F. • Release force
P.T. • Pretravel
O.T. • Overtravel
D.T. • Differential travel
O.P. • Operating position
O.P. from mounting
hole
O.P. from base of
terminal
R.F. max.
N [g]
P.T. max.
O.T. min.
D.T. max.
mm [in]
mm [in]
(see page 8)
(see page 8)
11,5 0,3
[0.45 0.012]
0,49 N [50 g]
0,49 N [50 g]
0,49 N [50 g]
0,49 N [50 g]
–
1,2 mm [0.05 in]
1,2 mm [0.05 in]
1,2 mm [0.05 in]
1,2 mm [0.05 in]
0,6 mm [0.02 in]
0,6 mm [0.02 in]
0,6 mm [0.02 in]
0,6 mm [0.02 in]
0,2 mm [0.01 in]
0,2 mm [0.01 in]
0,2 mm [0.01 in]
0,2 mm [0.01 in]
8,4 0,3
[0.33 0.012]
–
–
–
8,4 0,3
[0.33 0.012]
8,4 0,3
[0.33 0.012]
8,4 0,3
[0.33 0.012]
0,49 N [50 g]
0,11 N [11 g]
0,13 N [13 g]
0,13 N [13 g]
–
–
–
–
1,2 mm [0.05 in]
4,8 mm [0.19 in]
4,8 mm [0.19 in]
4,8 mm [0.19 in]
0,6 mm [0.02 in]
1,0 mm [0.04 in]
1,0 mm [0.04 in]
1,0 mm [0.04 in]
0,2 mm [0.01 in]
0,7 mm [0.03 in]
0,7 mm [0.03 in]
0,7 mm [0.03 in]
8,8 1,2
[0.35 0.047]
8,8 1,2
[0.35 0.047]
8,8 1,2
[0.35 0.047]
8,8 1,6
[0.35 0.063]
0,11 N [11 g]
0,07 N [7 g]
–
–
6,3 mm [0.25 in]
13,8 mm [0.54 in]
1,6 mm [0.06 in]
2,9 mm [0.11 in]
0,9 mm [0.04 in]
3,60 mm [0.14 in]
8,8 3,5
[0.34 0.138]
11,7 1,15
[0.46 0.045]
0,13 N [13 g]
–
4,7 mm [0.18 in]
0,9 mm [0.04 in]
0,75 mm [0.03 in]
10,7 1,2
[0.42 0.047]
0,14 N [14 g]
0,14 N [14 g]
–
–
4,6 mm [0.18 in]
4,6 mm [0.18 in]
1,0 mm [0.04 in]
1,0 mm [0.04 in]
0,75 mm [0.03 in]
0,75 mm [0.03 in]
10,7 1,2
[0.42 0.047]
14,5 1,1
[0.57 0.043]
0,12 N [12 g]
0,12 N [12 g]
0,15 N [15 g]
–
–
–
4,3 mm [0.17 in]
4,3 mm [0.17 in]
4,3 mm [0.17 in]
0,9 mm [0.04 in]
0,9 mm [0.04 in]
0,9 mm [0.04 in]
0,6 mm [0.02 in]
0,6 mm [0.02 in]
0,6 mm [0.02 in]
14,5 1,1
[0.57 0.043]
14,5 1.1
[0.57 0.043]
sensing.honeywell.com
7
ZW Series
MOUNTING DIMENSIONS
Ø2,30 0,10
[0.091 0.00ꢀ3
2,35
[0.093ꢀ
2,30 0,10
[0.091 0.00ꢀ3
9,25
[0.364ꢀ
2,60 0,10
[0.102 0.00ꢀ3
6,40
[0.252ꢀ
5,20
[0.205ꢀ
Note: unless otherwise noted,
a tolerace of 0,4 mm applies
to all dimensions.
9,50 0,15
[0.374 0.005ꢀ
19,80
[0.780ꢀ
TERMINAL TYPES
TYPE 15 - SOLDER (STRAIGHT)
TYPE 20 - PCB (STRAIGHT)
TYPE 70 -LONG SOLDER TERMINALS
TYPE 90 - CABLE-BOTTOM EXIT
PT
0,80
[0.031]
4,10
[0.161]
OP
2,40
3,20
15,40
[0.094]
[0.126]
[0.606]
6,90
[0.272ꢀ
2,40
2,40
[0.094]
[0.094]
7,50
[0.295]
7,50
7,50
7,50
7,50
[0.295]
7,50
[0.295]
[0.295]
[0.295]
[0.295]
Ø1,20
Ø 1,80
[0.071]
0,50 0,05
[0.020 0.002]
500 min.
[19,685]
[0.047]
0,50 0,05
0,50 0,05
[0.020 0.0023
[0.020 0.002]
A DIRECTION
B DIRECTION
Ø1,80
[0.071]
2,80
2,80
2,80
[0.110]
Ø 0,80
[0.032]
[0.110ꢀ
[0.110]
0,60 0,05
[0.024 0.0023
A
B
ꢀ,0 1,0
[0.118 0.0ꢀ93
7,50
[0.295]
NC
7,50
[0.295]
(ꢀ5°)
(ꢀ5°)
(ꢀ5°)
NO
COM
(GRAY) (BLUE) (BLACK)
TYPE 91 - CABLE-SIDE EXIT
[OPPOSITE PLUNGER END]
TYPE 92 - CABLE-SIDE EXIT
[PLUNGER END]
500 min.
[19.685]
500 min.
[19.685]
ꢀ,0 1,0
[0.118 0.0ꢀ93
ꢀ,0 1,0
[0.118 0.0ꢀ93
19,25 [0.758] SPDT 19,25 [0.758] SPDT
15,40 [0.606] SPST 15,40 [0.606] SPST
COM (BLACK)
NC (GRAY)
NO (BLUE)
NC (GRAY)
NO (BLUE)
COM (BLACK)
Ø1,80
[0.0713
Ø 0,80
[0.0ꢀ23
Ø1,80
[0.0713
Ø 0,80
[0.0ꢀ23
ACTUATOR TYPES
(ALL ACTUATORS EXCEPT TYPE A AND F ARE 4.0 WIDE)
TYPE B
TYPE C
TYPE D
TYPE A
PIN PLUNGER
STANDARD STRAIGHT LEVER (19.4mm)
LONG STRAIGHT LEVER (25.5MM)
SHORT STRAIGHT LEVER (17.4MM)
PT
PT
19,40
17,40
PT
[0.764]
[0.685]
PT
Ø2,15
[0.085]
OP
OP
OP
FP
OP
6,00
6,00
6,00
[0.236]
[0.236]
[0.236
7,50
[0.295]
7,50
4,85
[0.191]
7,50
[0.295]
4,85
[0.191]
7,50
4,85
[0.295]
[0.295]
[0.191]
TYPE F
TYPE E
TYPE H
TYPE J
ROLLER LEVER (17.2MM, ROLLØ4.8)
SIMULATED ROLLER LEVER (18.7MM,R3.4)
SMALL SIMULATED ROLLER LEVER (18.6MM,R1.3) LONGEST STRAIGHT LEVER (55.9MM
PT
5,10
[0.201]
PT
18,65
18,60
PT
17,20
[0.734]
[0.732]
PT
[0.677]
55,90
R1,30
R3,40
Ø4,80
[2.201]
[0.051]
[0.134]
[o.189]
OP
OP
OP
OP
6,00
6,00
6,00
6,00
[0.236]
[0.236]
[0.236]
[0.236
7,50
4,85
7,50
[0.295]
4,85
[0.191]
7,50
4,85
[0.191]
7,50
4,85
[0.191]
[0.295]
[0.191]
[0.295]
[0.295]
sensing.honeywell.com
8
ADDITIONAL INFORMATION
WARNING
PERSONAL INJURY
The following associated literature is available on the Honeywell web
site at sensing.honeywell.com:
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the
product could result in personal injury.
• Product installation instructions
• Product range guide
• Product nomenclature tree
Failure to comply with these instructions could result in
death or serious injury.
• Product application-specific information
– Case study: Stamp of approval, ZW Series
– Application note: Sensors and switches for potential HVAC/R
applications
WARNING
MISUSE OF DOCUMENTATION
– Application note: Sensors and switches in industrial air
compressors
•
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
– Application note: Sensors and switches in sanitary valves
•
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
– Application note: Sensors and switches in valves and flow
meters
– Application note: Sensors and switches for potential medical
applications
Failure to comply with these instructions could result in
death or serious injury.
– Application note: Sensors and switches for valve monitors and
valve indicators
WARRANTY/REMEDY
– Application note: Watertight switches in transportation
applications
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s standard
product warranty applies unless agreed to otherwise by Honeywell
in writing; please refer to your order acknowledgement or consult
your local sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of coverage,
Honeywell will repair or replace, at its option, without charge those
items it finds defective. The foregoing is buyer’s sole remedy
and is in lieu of all other warranties, expressed or implied,
including those of merchantability and fitness for a particu-
lar purpose. In no event shall Honeywell be liable for conse-
quential, special, or indirect damages.
– Technical bulletin: Applying precision switches
– Technical bulletin: Low energy switch guide
Find out more
Honeywell serves its customers
through a worldwide network
of sales offices, representatives
and distributors. For application
assistance, current specifications,
pricing or name of the nearest
Authorized Distributor, contact
your local sales office.
While we provide application assistance personally, through our
literature and the Honeywell website, it is up to the customer to
determine the suitability of the product in the application.
To learn more about Honeywell’s
sensing and switching products,
call +1-815-235-6847 or
1-800-537-6945,
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
visit sensing.honeywell.com,
or e-mail inquiries to
info.sc@honeywell.com
Sensing and Productivity Solutions
Honeywell
1985 Douglas Drive North
004989-2-EN IL50 GLO
February 2016
Golden Valley, MN 55422
honeywell.com
Copyright © 2016 Honeywell International Inc. All rights reserved.
相关型号：
ZW50F92DW3
Snap Acting/Limit Switch, SPST, Momentary, Wire Terminal, Long Straight Lever Actuator, Panel MountWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
HONEYWELL
ZW50F92DW4
Snap Acting/Limit Switch, SPST, Momentary, Wire Terminal, Long Straight Lever Actuator, Panel MountWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
HONEYWELL
ZW50F92EW4
Snap Acting/Limit Switch, SPST, Momentary, Wire Terminal, Simulated Roller Lever Actuator, Panel MountWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
HONEYWELL
ZW50F92FW1
MICRO SWITCH⢠Sealed Subminiature Basic SwitchesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
HONEYWELL
ZW50F92FW3
Snap Acting/Limit Switch, SPST, Momentary, Wire Terminal, Roller Lever Actuator, Panel MountWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
HONEYWELL
ZW50F92HW3
Snap Acting/Limit Switch, SPST, Momentary, Wire Terminal, Simulated Roller Lever Actuator, Panel MountWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
HONEYWELL
ZW50F92JW3
Snap Acting/Limit Switch, SPST, Momentary, Wire Terminal, Long Straight Lever Actuator, Panel MountWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
HONEYWELL
ZW50F92JW4
Snap Acting/Limit Switch, SPST, Momentary, Wire Terminal, Long Straight Lever Actuator, Panel MountWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
HONEYWELL
ZW50F92SW1-A
MICRO SWITCH⢠Sealed Subminiature Basic SwitchesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
HONEYWELL
ZW50F92SW1-C
MICRO SWITCH⢠Sealed Subminiature Basic SwitchesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
HONEYWELL
ZW50F99AA3-A
MICRO SWITCH⢠Sealed Subminiature Basic SwitchesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
HONEYWELL
ZW50F99AW1-D
MICRO SWITCH⢠Sealed Subminiature Basic SwitchesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
HONEYWELL
©2020 ICPDF网 联系我们和版权申明