HFD17/5-ZF-3N [HONGFA]
SUBMINIATURE SIGNAL RELAY;
| 型号： | HFD17/5-ZF-3N |
| 厂家： | 
HONGFA TECHNOLOGY |
| 描述： | SUBMINIATURE SIGNAL RELAY |
| 文件： | 总3页 (文件大小：609K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SUBMINIATURE SIGNAL RELAY
HFD17
Features
8A switching capability
●
●
●
●
●
UL insulation system: Class F available
Plastic sealed and flux proofed types available
Standard PCB layout
File No.: E133481
Product in accordance to IEC 60335-1 available
File No.:R50431434
RoHS compliant
COIL
CONTACT DATA
Contact arrangement
1C
Coil power
200mW;
100m max.
(AgNi gold-plated specifications：
0.1A 6VDC, AgNi non gold-plated specifications
and AgSnO2:1A 6VDC)
Contact resistance1)
Contact material
COIL DATA
AgNi, AgSnO2
at 23
Contact rating
(Res. load)
3A 30VDC
3A 250VAC
Pick-up Drop-out
Coil Resistance
x (1 10%)
Max.
Voltage2)
VDC
Nominal
Voltage
VDC
Voltage Voltage
VDC1)
max.
VDC1)
min.
Max. switching voltage
Max. switching current
Max. switching power
Min. applicable load
250VAC / 220VDC
8A
Standard
≤1.80
≤2.25
≤3.38
≤3.75
≤4.5
2.4
3
≥0.24
≥0.3
≥0.45
≥0.5
≥0.6
≥0.9
≥1.2
≥1.8
≥2.4
3.12
3.90
5.85
6.50
6.63
11.7
15.6
23.4
31.2
28.8
45.0
101.3
120
750VA / 90W
5V 1mA(Suitable for AgNi gold-plated specifications)
1 x 107OPS
1x105OPS(AgNi，85C，1son9soff，NO.
4.5
5
Mechanical endurance
o
Electrical endurance
HFD17:3A 125VAC HFD17-1:1A 125VAC)
6
180
Notes: 1) The data shown above are initial values.
2)Min. applicable load is reference value. Please perform the
confirmation test with the actual load before production since
reference value may change according to switching frequencies,
environmental conditions and expected contact resistance and
reliability.
≤6.75
≤9.00
≤13.5
≤18.0
9
400
12
18
24
700
1620
2800
CHARACTERISTICS
Insulation resistance
1000M (at 500VDC)
750VAC 1min
Notes: 1) The data shown above are initial values.
2)Maximum voltage refers to the maximum voltage which relay
coil could endure in a short period of time.
between open contacts
between coil & contacts
Dielectric
strength
1500VAC 1min
SAFETY APPROVAL RATINGS
Surge withstand voltage
between open contacts(10/160 µ s)
between coil & contacts(2/10 µ s)
1500V(FCC part 68)
2000V(Telecordia)
HFD17-1
HFD17
3A 125VAC,85oC
3A 250VAC,Room temp
3A 30VDC,85oC
1A 125VAC,85oC
1A 250VAC,Room temp
1A 30VDC,85oC
Operate time (at rated voltage.)
Release time (at rated voltage.)
Ambient temperature
Humidity
5ms max.
5ms max.
AgNi
UL/CUL
3A 250VAC,85oC
3A 30VDC,85oC
1A 250VAC,85oC
1A 30VDC,85oC
-40 to 85
5% to 85% RH
147m/s2
AgSnO2
TV-1 125VAC,Room temp
Functional
Shock resistance
3A 125VAC,85oC
3A 250VAC,Room temp
3A 30VDC,85oC
1A 250VAC,85oC
980m/s2
Destructive
1A 250VAC,Room temp
1A 30VDC,85oC
AgNi
Functional
10Hz to 55Hz 2.5mm DA
3A 250VAC,85oC
Vibration resistance
Destructive
TÜV
1A 250VAC,85oC
10Hz to 55Hz 5mm DA
DIP
3A 30VDC,85oC
1A 30VDC,85oC
AgSnO2
Termination
Unit weight
Construction
1(1) 250VAC,Room temp 1(1) 250VAC,Room temp
Approx. 4g
Plastic sealed
Flux proofed
Notes: 1)Only typical loads are listed above. Other load specifications
can be available upon request.
Notes: 1) The data shown above are initial values.
2) UL insulation system: Class F.
HONGFA RELAY
2020 Rev. 1.00
ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED
48
ORDERING INFORMATION
24
HFD17/
HFD17:3A contact rating
-Z F -3
N (XXX)
Type
HFD17-1:1A contact rating
Coil voltage
2.4,3, 4.5, 5, 6, 9, 12, 18, 24 VDC
Contact arrangement Z:1 Form C
Construction
F: Flux proofed
3: AgNi
Nil: Plastic sealed
T: AgSnO2
Contact material
N: No gold plated
Nil:Gold plated(Only for AgNi type)
Contact plating
Special code1)
XXX: Customer special requirement
Notes: 1) The customer special requirement express as special code after evaluating by Hongfa.
2) For products that should meet the explosion-proof requirements of "IEC 60079 series",please note [Ex] after the specification while placing
orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products.
OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT
Unit: mm
Outline Dimensions
15.7
0.3
0.5
0.6
1.2
10.16
2.54
(Bottom view)
Wiring Diagram
PCB Layout
(Bottom view)
(Bottom view)
5x
1
2.54
10.16
Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm
and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm.
2) The tolerance without indicating for PCB layout is always ±0.1mm.
3) The width of the gridding is 2.5mm.
49
CHARACTERISTIC CURVES
HFD17
ENDURANCE CURVE
30VDC Resistive Load
MAXIMUM SWITCHING POWER
1000V
100V
500
AC Resistive Load
100
50
DC Resistive Load
30V
10V
125VAC Resistive Load
10
10mA
1
7
10A
0
1
2
3
4
5
6
1A
10uA
100mA
Contact Current
Contact Current
Test conditions:
AgNi, NO contact ,Resistive load, 85
.
HFD17-1
MAXIMUM SWITCHING POWER
ENDURANCE CURVE
1000V
100V
500
AC 阻性负载
30VDC 阻性负载
100
50
DC 阻性负载
30V
10V
125VAC 阻性负载
10
10mA
1
10uA
10A
100mA
0
3
5
1A
1
2
4
6
7
Contact Current
Contact Current
Test conditions:
AgNi, NO contact ,Resistive load, 85
.
Notice
1) To avoid using relays under strong magnetic field which will change the parameters of relays such as pick-up voltage and drop-out voltage.
2) Energizing coil with rated voltage is basic for normal operation of a relay, please make sure the energized voltage to relay coil have reached
the rated voltage.
3) The relay may be damaged because of falling or when shocking conditions exceed the requirement.
4) Plastic sealed type is recommended for an environment with noxious gas such as H2S, SO2 and NO2,ect., and/or when load current is low,
and/or the PCB boards need to be washed after relays are soldered. For other using conditions flux proofed type could be adopted.
5) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB.
6) Regarding the plastic sealed relay, we should leave it cooling naturally untill below 40oC after welding, then clean it and deal with coating, remarkably
the temperature of solvents should also be controlled below 40oC.Please avoid cleaning the relay by ultrasonic, avoid using the solvents like
gasoline, Freon, and so on, which would affect the configuration of relay or influence the environment.
7) About preferable condition of operation, storage and transportation, please refer to "Explanation to terminology and guidetines of relay".
8) Please contact us for more details if you have different conditions of application.
Disclaimer
The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice.
We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to
choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s
responsibility to determine which product should be used only.
© Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved.
50
相关型号：
HFD2/003-M-L1
Power/Signal Relay, DPDT, Latched, 0.033A (Coil), 3VDC (Coil), 100mW (Coil), 3A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
HONGFA
©2020 ICPDF网 联系我们和版权申明