HFD23/2.4-1ZS866 [HONGFA]
Power/Signal Relay, 1 Form C, SPDT, Momentary, 0.0625A (Coil), 3.6VDC (Coil), 150mW (Coil), 2A (Contact), 60VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount,;
| 型号： | HFD23/2.4-1ZS866 |
| 厂家： | 
HONGFA TECHNOLOGY |
| 描述： | Power/Signal Relay, 1 Form C, SPDT, Momentary, 0.0625A (Coil), 3.6VDC (Coil), 150mW (Coil), 2A (Contact), 60VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, PC 光电二极管 继电器 |
| 文件： | 总3页 (文件大小：482K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SUBMINIATURE SIGNAL RELAY
HFD23
Features
● Max.4A switching capability
● High sensitive: 150mW
● 1 Form C configuration
File No.:E133481
● Gold plated contact
File No.:R50306254
● Subminiature
● Plastic sealed type available
● 90oC high temperature specifical for selection
File No.:CQC09002035070
RoHS compliant
CONTACT DATA
COIL DATA
at 23
Standard type
Contact arrangement
Contact resistance
Contact material
1A
1C
Pick-up
Voltage
Drop-out
Voltage
VDC
Nominal
Voltage
Max.
Voltage
VDC
Coil
Resistance
100m max. (at 10mA 30mVDC)
AgNi +Au plated
VDC
VDC
max.
min.
Contact rating
(Res. load)
Max. switching voltage
Max. switching current
Max. switching power
1A125VAC/2A 30VDC 0.5A125VAC/1A 30VDC
125VAC / 60VDC
1.5
2.4
3
1.20
1.92
2.40
3.60
4.00
4.80
7.20
9.60
0.15
0.24
0.30
0.45
0.50
0.60
0.90
1.20
2.25
3.6
11.3 x (1 10%)
28.8 x (1 10%)
45 x (1 10%)
4A
2A
62.5VA / 30W
1mA 5V
4.5
125VA / 60W
3.5
5
5.75 101.3 x (1 10%)
1)
Min. applicable load
7.5
9.0
125 x (1 10%)
180 x (1 10%)
405 x (1 10%)
720 x (1 10%)
2880 x (1 15%)
Mechanical endurance
1 x 107OPS
6
9x104OPS (1H:1A125VAC;1Z:0.5A125VAC,
Resistive load., Room temp., 1s on 9s off)
2)
9
13.5
18.0
36.0
Electrical endurance
12
Notes:1) Min. applicable load is reference value. Please perform the
confirmation test with the actual load before production since
reference value may change according to switching frequencies,
environmental conditions and expected contact resistance and
reliability.
24
19.20
2.40
Sensitive type
Pick-up
Voltage
VDC
Drop-out
Voltage
VDC
Nominal
Voltage
VDC
2) Electric endurance data are collected in the NO or NC contact test.
Max.
Voltage
VDC
Coil
Resistance
CHARACTERISTICS
max.
min.
Insulation resistance
1000M (at 500VDC)
1000VAC 1min
500VAC 1min
5ms max.
2.25
3.6
1.5
2.4
3
1.20
1.90
2.40
0.15
0.24
0.30
15 x (1 10%)
38.4 x (1 10%)
60 x (1 10%)
Between coil & contacts
Dielectric
strength
Between open contacts
4.5
Operate time (at rated. volt.)
Release time (at rated. volt.)
Temperature rise (at rated.volt.)
Vibration resistance
4.5
5
3.60
4.00
0.45
0.50
5.75
7.5
135 x (1 10%)
167 x (1 10%)
5ms max.
65K max.
6
9
4.80
7.20
9.60
0.60
0.90
1.20
240 x (1 10%)
540 x (1 10%)
960 x (1 10%)
9.0
10Hz to 55Hz 3.3mm DA
196m/s2
13.5
18.0
Functional
Shock
980m/s2
resistance
Destructive
12
Humidity
5% to 98% RH
-40 to 70
36.0
24
19.20
2.40
3840 x (1 15%)
Notes: 1) When user's requirements can't be found in the above table,
special order allowed.
Ambient temperature
-40 to 90 (high temperature)
2) In case 5V of transistor drive circuit, it is recommended to use
4.5V type relay, and 3V to use 2.4V type relay.
Unit weight
Termination
Construction
Approx. 2.2g
PCB (DIP)
SAFETY APPROVAL RATINGS
Plastic sealed
1Z type:
1A 30VDC 70
1H type:
2A 30VDC 40
1A 125VAC 40
1A 30VDC 90
Notes:1)The data shown above are initial values.
0.5A 48VDC 70
0.5A 125VAC 70
1A 30VDC 90
2) UL insulation system: Class A
UL/CUL
COIL
Coil power
0.5A 125VAC 90
0.5A 125VAC 90
Sensitive: Approx. 150mW;
Standard: Approx. 200mW
Notes: 1) All values unspecified are at room temperature.
2) Only typical loads are listed above. Other load specifications
can be available upon request.
HONGFA RELAY
ISO9001, ISO/TS16949 , ISO14001, OHSAS18001, IECQ QC 080000 CERTIFIED
2020 Rev. 1.00
51
ORDERING INFORMATION
012
HFD23 /
-1Z
S
(XXX)
Type
Coil voltage
1.5, 2.4, 3, 4.5, 5, 6, 9, 12, 24VDC
1H: 1 Form A 1Z: 1 Form C
S: Sensitive type P: Standard type
XXX: Customer special requirement
Contact arrangement
Coil power
Special code2)
Nil: Standard 866:High temperature type
Notes: 1) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays
on PCB.
2) The customer special requirement express as special code after evaluating by Hongfa.
3) The high temperature type indicates the maximum ambient temperature 90 and the high temperature type is 866. It is only suitable for
sensitive specifications.
4)Standard tube packing length is 265mm. Any special requirement needed, please contact us for more details.
5) For products that should meet the explosion-proof requirements of "IEC 60079 series",please note [Ex] after the specification while placing
orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products.
OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT
Unit: mm
Outline Dimensions
Wiring Diagram
PCB Layout
(Bottom view)
(Bottom view)
HFD23/1Z type
6x
1
0.3
0.3
7.5
12.5
2.54
0.5
0.5
0.3
7.62
0.3
5.08
2.54
1.1
HFD23/1H type
0.3
0.3
7.5
12.5
5x
1
2.54
0.5
0.3
0.5
0.3
5.08
2.54
1.1
7.62
Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension ＞1mm
and ≤5mm, tolerance should be ±0.3mm; outline dimension ＞5mm, tolerance should be ±0.4mm.
2) The tolerance without indicating for PCB layout is always ±0.1mm.
3) The width of the gridding is 2.54mm.
52
CHARACTERISTIC CURVES
MAXIMUM SWITCHING POWER
ENDURANCE CURVE
5
500
1A, AC
2
1A, 30VDC
1C, 30VDC
100
50
1A, DC
1
1C, AC
0.7
1A,125VAC
1C,125VAC
0.5
1C, DC
10
7
0.2
0.1
5
2.0
1.4
1.6
1.8
2.2
0
0.2
0.4
0.6
0.8
1.0
1.2
10
20 30 40 50
100
200
300 400 500
Contact Current (A)
Contact Voltage (V)
Test conditions:
Resistive load, Room temp., 1s on 9s off.
Notice
1) To avoid using relays under strong magnetic field which will change the parameters of relays such as pick-up voltage and drop-out voltage.
2) The relay may be damaged because of falling or when shocking conditions exceed the requirement.
3) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB.
4) Regarding the plastic sealed relay, we should leave it cooling naturally untill below 40oC after welding, then clean it and deal with coating, remarkably
the temperature of solvents should also be controlled below 40oC.Please avoid cleaning the relay by ultrasonic, avoid using the solvents like gasoline,
Freon, and so on, which would affect the configuration of relay or influence the environment.
5) When relays is taking continuous current, the insulation material of the coil will be aged due to the heat. Thus please don't ground connect the
coil of the relay to reduce the risk of corrosion.At the same time, please design protection circuit to prevent loss caused by disconnection.
6) When relays is taking continuous current, the insulation material of the coil will be aged due to the heat. Thus please don't ground connect the
coil of the relay to reduce the risk of corrosion.At the same time, please design protection circuit to prevent loss caused by disconnection.
7) About preferable condition of operation, storage and transportation, please refer to "Explanation to terminology and guidetines of relay".
Disclaimer
The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice.
We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to
choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s
responsibility to determine which product should be used only.
© Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved.
53
相关型号：
HFD23/4.5-1HS866
Power/Signal Relay, 1 Form A, SPST, Momentary, 0.033A (Coil), 5.75VDC (Coil), 150mW (Coil), 4A (Contact), 60VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount,
HONGFA
HFD23/4.5-1ZS
Power/Signal Relay, 1 Form C, SPDT, Momentary, 0.033A (Coil), 5.75VDC (Coil), 150mW (Coil), 2A (Contact), 60VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount,
HONGFA
©2020 ICPDF网 联系我们和版权申明