HFD3-VI/1.5-2H-L13SR [HONGFA]
SUBMINIATURE HIGH INSULATION RELAY;型号: | HFD3-VI/1.5-2H-L13SR |
厂家: | HONGFA TECHNOLOGY |
描述: | SUBMINIATURE HIGH INSULATION RELAY |
文件: | 总9页 (文件大小:1071K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SUBMINIATURE HIGH INSULATION RELAY
HFD3-VI
Features
Third generation Signal relay
●
●
●
●
2 Form A and 2 Form C configurations
File No.:E133481
High contact swtiching capacity:10mA 1000VDC/1500VDC
SMT and DIP types available
●Single side stable and latching type available
File No.:R 50433438
6kV dielectric strength (between coil and contacts),
Meet ITU-T K.21 requirement
●
2 pairs of NO contacts connected in series with contact
gap ≥1.5mm,product in accordance to IEC62776-1
available.
●
File No.:CQC19002231071
RoHS compliant
CONTACT DATA
CHARACTERISTICS
2A/2C
≤100m (10mA 30mVDC)
AgNi+ Au plated
Insulation resistance
1000M (500VDC)
1500VAC 1min
1500VAC 1min
4000VAC 1min
Contact arrangement
Contact resistance1)
Between open contacts
Dielectric
Between contact sets
strength
Contact material
2A 30VDC
1A 277VAC
10mA 1500VDC
10mA 1000VDC
Between coil&contact
Contact rating
(Res. load)
Surge withstand voltage
Between open contacts (10/160µs)
Between coil & contacts (1.2/50µs)
Between coil & contacts (10/700µs)
2.5kV
6kV
6kV2)
≤6ms
1100VAC/1500VDC(Two sets of open
contacts in series)
Max. switching voltage
600VAC/800VDC(Single contact)
Operate time (Set time)
Max. switching current
Max. switching power
Min. applicable load2)
Mechanical endurance
4A
277VA / 60W
10mV 10uA
1 x 107OPS
Release time (Reset time)
≤6ms
-40 to 85
Ambient temperature
3)
-40 to 105
Humidity
5% to 85% RH
735m/s2
1 x 105ops(Resistive load 85 2A 30VDC)
5 x 104ops(Resistive load 85 1A 277VAC)
5 x 104ops(Resistive load 105
Shock
Functional
980m/s2
resistance
Destructive
Electrical endurance
3)
10mA 1000VDC)
3 x 104ops(Resistive load 105
Vibration
Functional
Destructive
10Hz to 55Hz 3.3mm DA
10Hz to 55Hz 5.0mm DA
DIP、SMT
3)
10mA 1500VDC)
resistance
Termination
Notes: 1) The data shown above are initial values.
2) Min. applicable load is reference value. Please perform the
confirmation test with the actual load before production since
reference value may change according to switching frequencies,
environmental conditions and expected contact resistance
and reliability.
Approx.2g
Unit weight
Moisture sensitivity levels (Only for
SMT type, JEDEC-STD-020)
3) Two sets of open contacts or two sets of closed contacts in Series.
Two sets of open contacts in Series:
MSL-3
Plastic
Construction
1
4
5
8
6
Notes: 1) The data shown above are initial values.
2) Product with 907 suffix, meet ITU-T K.21 requirement on
surge voltage.
12
9
7
3) Product with 888 suffix is for application at 105
.
4) Please see more details in the ordering information.
COIL
Approx.200mW
Approx.280mW (2)
Approx.140mW
SAFETY APPROVAL RATINGS
Single side stable
1 coil latching
2A 30VDC,at 85
Coil power
UL/CUL
TUV
1A 277VAC,at 85
10mA 1000VDC, at105
10mA 1500VDC, at105
Approx.200mW (2)
AgNi+Au plated
≤90K(2A Resistive load 85oC environment)
Temperature rise
Notes: 1) The data shown above are initial values.
(2) Product with 907 suffix, meet ITU-T K.21 requirement on surge
voltage。
Notes: Only typical loads are listed above. Other load specifications
can be available upon request.
HONGFA RELAY
2020 Rev. 1.01
ISO9001、ISO/TS16949、ISO14001、OHSAS18001、IECQ QC 080000 CERTIFIED
58
COIL DATA
at 23
Single side stable
Pick-up
Voltage
VDC
Nominal
Power
mW
Drop-out
Voltage
VDC
Nominal
Voltage
VDC
Coil
Resistance
Max.
Voltage
VDC4)
Coil
Code
min.1)
max.1)
approx.
HFD3-VI/1.5
HFD3-VI/2.4
HFD3-VI/3
HFD3-VI/4.5
HFD3-VI/5
HFD3-VI/6
HFD3-VI/9
HFD3-VI/12
HFD3-VI/24
1.5
2.4
3
≤1.13
≤1.8
≤2.25
≤3.38
≤3.75
≤4.5
≤6.75
≤9
≥0.15
≥0.24
≥0.3
≥0.45
≥0.5
≥0.6
≥0.9
≥1.2
≥2.4
11.2 x (1 10%)
28.8 x (1 10%)
45x (1 10%)
200
200
200
200
200
200
200
200
200
2.2
3.6
4.5
6.7
7.5
9.0
13.5
18
4.5
5
101 x (1 10%)
125 x (1 10%)
180 x (1 10%)
405x (1 10%)
720x (1 10%)
2880 x (1 10%)
6
9
12
24
≤18
36
1 coil latching
Nominal
Power
mW
Reset
Voltage
VDC
Set
Voltage
VDC
Coil
Resistance
Nominal
Voltage
VDC
Max.
Voltage
VDC4)
Coil
Code
min1.)
max.1)
approx.
HFD3-VI/1.5-L1
HFD3-VI/2.4-L1
HFD3-VI/3-L1
HFD3-VI/4.5-L1
HFD3-VI/5-L1
HFD3-VI/6-L1
HFD3-VI/9-L1
HFD3-VI/12-L1
HFD3-VI/24-L1
1.5
2.4
3
≤1.13
≤1.8
≤2.25
≤3.38
≤3.75
≤4.5
≤6.75
≤9
≤1.13
≤1.8
≤2.25
≤3.38
≤3.75
≤4.5
≤6.75
≤9
16.1 x (1 10%)
41 x (1 10%)
140
140
140
140
140
140
140
140
140
2.7
4.3
64.3 x (1 10%)
145 x (1 10%)
178 x (1 10%)
257 x (1 10%)
579 x (1 10%)
1028x (1 10%)
4114 x (1 10%)
5.4
4.5
5
8.1
9
6
10.8
16.2
21.6
43.2
9
12
24
≤18
≤18
With 907 suffix
Single side stable
Drop-out
Voltage
VDC
Pick-up
Voltage
VDC
Nominal
Power
mW
Nominal
Voltage
VDC
Coil
Resistance
Max.
Voltage
VDC4)
Coil
Code
1)
1)
min.
max.
approx.
HFD3-VI/1.5
HFD3-VI/2.4
HFD3-VI/3
HFD3-VI/4.5
HFD3-VI/5
HFD3-VI/6
HFD3-VI/9
HFD3-VI/12
HFD3-VI/24
1.5
2.4
3
≤1.13
≤1.8
≤2.25
≤3.38
≤3.75
≤4.5
≤6.75
≤9
≥0.15
≥0.24
≥0.3
≥0.45
≥0.5
≥0.6
≥0.9
≥1.2
≥2.4
8 x (1 10%)
20.6 x (1 10%)
32.1x (1 10%)
72.3 x (1 10%)
89.3 x (1 10%)
128.6 x (1 10%)
289.3x (1 10%)
514.3x (1 10%)
1920x (1 10%)
280
280
280
280
280
280
280
280
300
1.95
3.12
3.9
4.5
5
5.85
6.5
6
7.8
9
11.7
15.6
31.2
12
24
≤18
59
COIL DATA
at 23
With 907 suffix
1 coil latching
Reset
Voltage
VDC
Nominal
Power
mW
Set
Voltage
VDC
Coil
Resistance
Nominal
Voltage
VDC
Max.
Voltage
VDC4)
Coil
Code
1)
1)
min.
approx.
max.
HFD3-VI/1.5-L1
HFD3-VI/2.4-L1
HFD3-VI/3-L1
HFD3-VI/4.5-L1
HFD3-VI/5-L1
HFD3-VI/6-L1
HFD3-VI/9-L1
HFD3-VI/12-L1
HFD3-VI/24-L1
1.5
2.4
3
≤1.13
≤1.8
≤2.25
≤3.38
≤3.75
≤4.5
≤6.75
≤9
≤1.13
≤1.8
≤2.25
≤3.38
≤3.75
≤4.5
≤6.75
≤9
11.2 x (1 10%)
28.8 x (1 10%)
45 x (1 10%)
200
200
200
200
200
200
200
200
200
1.95
3.12
3.9
4.5
5
101 x (1 10%)
125 x (1 10%)
180 x (1 10%)
405 x (1 10%)
720x (1 10%)
2880 x (1 10%)
5.85
6.5
6
7.8
9
11.7
15.6
31.2
12
24
≤18
≤18
Notes: 1)Only typcal loads are listed above.Other load specifications can be available upon request.
2)When user's requirements can't be found in the above table,special order allowed.
3)In case 5V of transistor drive circuit, it is recommended to use 4.5V type relay, and 3V to use 2.4V type relay.
4)Maximum voltage refers to the maximum voltage which relay coil could endure in a short period of time.
ORDERING INFORMATION
(XXX)
R
3
-2H -L1
S
HFD3-VI / 24
Type
Coil voltage
Sort
1.5, 2.4, 3, 4.5, 5, 6, 9, 12, 24VDC
2H: 2 Form A
2Z: 2 Form C
Nil: Single side stable
L1: 1 coil latching
Sort
Contact material
Terminal type
Packing style
3: AgNi+Gold plated
S: Standard SMT S1: Short terminal SMT Nil: DIP
R: Tape and reel packing (Only for SMT type)1)
Nil: Tube packing(Only for DIP type)2)
XXX: Customer special requirement
For insitance: Product with 907 suffix, meet ITU-T K.21 requirement on surge voltage.
Product with 888 suffix is for application at 105
Product with 897 suffix is with pin distance at 4.58mm.
Nil: Standard
Special code3)
.
Notes: 1)R type (tape and reel) packing is moisture-proof which meets requirement of MSL-3. Please choose R type packing for SMT products.
For R type, the letter "R" will only be printed on packing tag but not on relay cover. Tube packing is normally not available for SMT
products unless specially requested by customer. But please note that tube packing is not moisture-proof so please bake the products
before use according to description of Notice 11 herewith. In addition, tube packaging will be adopted when the ordering quantity of R
type is equal to or less than 100 pieces unless otherwise specified.
2)The standard tube length is 624mm.
3)The customer special requirement express as special code after evaluating by Hongfa.The suffix 907, 888 & 897 are for special versions.
The ordering PN should be HFD3-VI/12-2Z-3(907) for instance.
4)For products that should meet the explosion-proof requirements of "IEC 60079 series",please note [Ex] after the specification while
placing orders.Not all products have explosion-proof certification,so please contact us if necessary, in order to select the suitable products.
60
OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT
Unit: mm
PCB Layout
(Bottom view)
Outline Dimensions
Type 2H:
DIP type
2.54
15
7.5
0.5
1.15
0.25
10.16
1
2.54
7.5
15
Standard SMT type
0.5
5.08
9.2
1.15
10.16
1
2.54
7.5
15
Short terminal SMT type
0.5
5.08
7.5
1.15
10.16
Single side stable
1 coil latching
1
5
8
6
7
1
5
8
6
Wiring Diagram
(Bottom view)
12
12
7
Orientation mark
Orientation mark
No energized condition
Reset condition
61
OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT
Unit: mm
PCB Layout
(Bottom view)
Outline Dimensions
Type 2Z:
DIP type
7.5
15
7.62
2.54
0.5
0.25
1.15
15
7.5
1
2.54
Standard SMT type
0.5
1.15
5.08
9.2
7.62
15
7.5
Short terminal SMT type
1
2.54
0.5
5.08
7.5
1.15
7.62
1 coil latching
Single side stable
1
4
5
6
7
1
4
5
6
7
Wiring Diagram
(Bottom view)
12
9
8
12
Orientation mark
9
8
Orientation mark
No energized condition
Reset condition
62
OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT
Unit: mm
PCB Layout
(Bottom view)
Outline Dimensions
With 897 suffix
Type 2H:
2.54
15
7.5
DIP type
0.5
0.25
5.08
1.15
7.62
1
2.54
7.5
15
Standard SMT type
0.5
1.15
5.08
9.2
7.62
5.08
1
2.54
15
7.5
Short terminal SMT type
0.5
5.08
7.5
7.62
5.08
1.15
1 coil latching
Single side stable
1
4
6
1
4
6
7
Wiring Diagram
(Bottom view)
12
9
7
12
9
Orientation mark
Orientation mark
No energized condition
Reset condition
Remark:1) The size of the pin of the external map of the product is the size before the tin(after the tin is touched), and the size of the installation
hole is the design size of the recommended PCB plate hole. The design size of the specific PCB plate hole can be mapped and adjusted
according to the product's physical object.;
2) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension >1mm
and ≤5mm, tolerance should be ±0.3mm; outline dimension >5mm, tolerance should be ±0.4mm.
3) The tolerance without indicating for PCB layout is always ±0.1mm.
63
TAPE PACKING
Unit: mm
Direction of Relay Insertion
I
Reel
4:1
Orientation mark
Cover tape
Feed direction
Embossed
carrier tape
Notes: 1) Packing: 400pcs/reel, 5 reels/carton.
I
2) MOQ for reel packing is 800pcs
adhesive tape
Cover tape
Cover tape
adhesive tape
Feed direction
during customer usage
at least 5 empty
relay positions
at least 5 empty
relay positions
Reel Dimensions
1
29.4
24.4
0.2
13
0.3
1.6
2
3×R1
0.5
21
64
TAPE PACKING
Unit: mm
Tape Dimensions (S type: Standard SMT)
A-A
B-B
B
0.1
16
0.5
0.1
0.1
4
2
。
3
max
。
20
0.2
10
A
A
(3.5)
。
max.
3
10.3
B
Tape Dimensions (S1 type: Short terminal SMT)
A-A
B-B
B
0.1
16
0.5
。
3
0.1
0.1
4
2
max
。
20
(3.5)
A
。
max.
A
3
0.2
8.2
10.3
B
CHARACTERISTIC CURVES
MAXIMUM SWITCHING POWER
Two sets of open/closed contacts in series
Singl contact
2000V
1500V
1000V
1000V
100V
ACResistiveLoad
ACResistiveLoad
DC ResistiveLoad
DCResistiveLoad
100V
30V
10V
30V
10V
10mV
10mV
100mA
10A
10uA 10mA
1A
10mA
1A
10A
10uA
100mA
Contact Current
Contact Current
65
CHARACTERISTIC CURVES
Temperature/Time profile of Reflow Soldering see below:
ENDURANCE CURVE
Temperature
(
)
500
Soldering
30VDC
Resistive Load
max.245
220
100
50
max. 3℃/s
180
150
Preheating
max. 6℃/s
10
277VAC Resistive Load
Time(s)
max. 60
max. 100
1
max. 100
0
2
3
1
Contact Current (A)
max. 280
Test conditions:
1 form A or 1 form B
Resistive load, at 85oC, 1s on 9s off.
Notice
1) This relay is highly sensitive polarized relay, if correct polarity is not applied to the coil terminals, the relay does not operate properly.
2) To avoid using relays under strong magnetic field which will change the parameters of relays such as pick-up voltage and drop-out voltage.
3) Relay is on the “reset” status when being released from stock, with the consideration of shock risen from transit and relay mounting, it should
be changed to the “set” status when application(connecting to the power supply). Please reset the relay to “set” or “reset” status on request.
4) Energizing coil with rated voltage is basic for normal operation of a relay, please make sure the energized voltage to relay coil have reached the
rated voltage. Regarding latching relay, in order to maintain the "set" or "reset" status, impulse width of the rated voltage applied to coil should
be more than 5 times of "set" or "reset" time.
5) For a monosteady state relay, after the relay is reliably operated, if it needs to be kept under pressure, make sure that the effective value of the
voltage is not less than 60 % of the rated voltage;
6) The relay may be damaged because of falling or when shocking conditions exceed the requirement.
7) For SMT products, validation with real application should be done before your series production, if the reflow-soldering temperature curve is out
of our recommendation. Generally, two-time reflow-soldering is not recommended for the relay. However, if two-time reflow-soldering is required,
a 60-min. interval should be guaranteed and a validation should be done before production.
8) Please use wave peak welding or manual welding for direct relay welding. If you need to return welding, please confirm the feasibility with us.
9) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB.
10) Regarding the plastic sealed relay, we should leave it cooling naturally untill below 40oC after welding, then clean it and deal with coating,
remarkably the temperature of solvents should also be controlled below 40oC.Please avoid cleaning the relay by ultrasonic, avoid using the solvents
like gasoline, Freon, and so on, which would affect the configuration of relay or influence the environment.
11) About preferable condition of operation, storage and transportation, please refer to "Explanation to terminology and guidetines of relay".
12) Relays packaged in moisture barrier bags meet MSL-3 requirements. The relays should be stored at ambient conditions of ≤30℃and ≤60%
RH after they are removed from their packaging, and should be used within 168 hours. If the relays cannot be used within 168 hours, please
repack them or store them in a drying oven at 25℃±5℃, ≤10% RH. Otherwise, relays may be subjected to a soldering test to check their
performance, or they may be used after keeping them in an oven for 72 hours at with 50℃±5℃, ≤30% RH.
Disclaimer
The specification is for reference only. See to "Terminology and Guidelines" for more information. Specifications subject to change without notice.
We could not evaluate all the performance and all the parameters for every possible application. Thus the user should be in a right position to
choose the suitable product for their own application. If there is any query, please contact Hongfa for the technical service. However, it is the user’s
responsibility to determine which product should be used only.
© Xiamen Hongfa Electroacoustic Co., Ltd. All rights of Hongfa are reserved.
66
相关型号:
©2020 ICPDF网 联系我们和版权申明