HFBR-5805A [HP]
HFBR-5805/5805T/5805A/5805AT ATM Transceivers for SONET OC-3/SDH STM-1 in Low Cost 1 x 9 Package Style; HFBR - 5805 / 5805T / 5805A / 5805AT ATM收发器用于SONET OC - 3 / SDH STM - 1的低成本1 ×9封装形式型号: | HFBR-5805A |
厂家: | HEWLETT-PACKARD |
描述: | HFBR-5805/5805T/5805A/5805AT ATM Transceivers for SONET OC-3/SDH STM-1 in Low Cost 1 x 9 Package Style |
文件: | 总14页 (文件大小:247K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HFBR-5805/ 5805T/ 5805A/ 5805AT ATM
Transceivers for SONET OC-3/ SDH
STM-1 in Low Cost 1 x 9 Package Style
Data Sheet
Features
• Full compliance with ATM forum
UNI SONET OC-3 multimode fiber
physical layer specification
Description
Transmitter Sections
• Multisourced 1 x 9 package style
with choice of duplex SC or
duplex ST* receptacle
• Wave solder and aqueous wash
process compatibility
• Manufactured in an ISO 9002
certified facility
• Single +3.3 V or +5.0 V power
supply
The HFBR-5800 family of
transceivers from Agilent
provide the system designer
with products to implement a
range of solutions for
multimode fiber SONET OC-3
(SDH STM-1) physical layers
for ATM and other services.
The transmitter section of the
HFBR-5803 and HFBR-5805
series utilize 1300 nm InGaAsP
LEDs. These LEDs are
packaged in the optical
subassembly portion of the
transmitter section. They are
driven by a custom silicon IC
which converts differential
PECL logic signals, ECL
referenced (shifted) to a +3.3 V
or +5.0 V supply, into an
analog LED drive current.
The transceivers are all
supplied in the industry
standard 1 x 9 SIP package
style with either a duplex SC
or a duplex ST* connector
interface.
Applications
• Multimode fiber ATM backbone
links
• Multimode fiber ATM wiring
closet to desktop links
Receiver Sections
ATM 2 km Backbone Links
The receiver section of the
HFBR-5803 and HFBR-5805
series utilize InGaAs PIN
photodiodes coupled to a
custom silicon transimpedance
preamplifier IC. These are
packaged in the optical
subassembly portion of the
receiver.
Ordering Information
The HFBR-5805/-5805T are
1300 nm products with optical
performance compliant with
the SONET STS-3c (OC-3)
Physical Layer Interface
Specification. This physical
layer is defined in the ATM
Forum User-Network Interface
The HFBR-5805/5805T/5805A/
5805AT 1300 nm products are
available for production orders
through the Agilent Component
Field Sales Offices and
Authorized Distributors world
wide.
(UNI) Specification Version 3.0. These PIN/preamplifier
0 °C to +70 °C
This document references the
ANSI T1E1.2 specification for
the details of the interface for
2 km multimode fiber
combinations are coupled to a
custom quantizer IC which
provides the final pulse
shaping for the logic output
and the Signal Detect function.
The data output is dif-
ferential. The signal detect
output is single-ended. Both
data and signal detect outputs
are PECL compatible, ECL
referenced (shifted) to a 3.3 V
or +5.0 V power supply.
HFBR-5805/5805T
-10 °C to +85 °C
HFBR-5805A/5805AT
backbone links.
*ST is a registered trademark of AT&T
Lightguide Cable Connectors.
The ATM 100 Mb/s-125 MBd
Physical Layer interface is best
implemented with the HFBR-
5803 family of Fast Ethernet
and FDDI Transceivers which
are specified for use in this
4B/5B encoded physical layer
per the FDDI PMD standard.
Note: The “T” in the product numbers
indicates a transceiver with a duplex ST
connector receptacle.
Product numbers without a “T” indicate
transceivers with a duplex SC connector
receptacle.
Package
The outer housing including
the duplex SC connector or
the duplex ST ports is molded
of filled nonconductive plastic
to provide mechanical strength
and electrical isolation. The
solder posts of the Agilent
design are isolated from the
circuit design of the
The transceiver is attached to
a printed circuit board with
the nine signal pins and the
two solder posts which exit
the bottom of the housing. The
two solder posts provide the
primary mechanical strength to
withstand the loads imposed
on the transceiver by mating
with duplex or simplex SC or
ST connectored fiber cables.
The overall package concept
for the Agilent transceivers
consists of three basic
elements; the two optical
subassemblies, an electrical
subassembly and the housing
as illustrated in Figure 1 and
Figure 1a.
transceiver and do not require
connection to a ground plane
on the circuit board.
The package outline drawing
and pin out are shown in
Figures 2, 2a and 3. The
details of this package outline
and pin out are compliant
with the multisource definition
of the 1 x 9 SIP. The low
profile of the Agilent
transceiver design complies
with the maximum height
allowed for the duplex SC
connector over the entire
length of the package.
ELECTRICAL SUBASSEMBLY
DUPLEX SC
RECEPTACLE
DIFFERENTIAL
DATA OUT
PIN PHOTODIODE
SINGLE-ENDED
SIGNAL
QUANTIZER IC
DETECT OUT
PREAMP IC
OPTICAL
SUBASSEMBLIES
The optical subassemblies
DIFFERENTIAL
DATA IN
LED
utilize a high volume assembly
process together with low cost
lens elements which result in a
cost effective building block.
DRIVER IC
The electrical subassembly
consists of a high volume
multilayer printed circuit
board on which the IC chips
and various surface-mounted
passive circuit elements are
attached.
TOP VIEW
Figure 1. SC Connector Block Diagram
ELECTRICAL SUBASSEMBLY
DUPLEX ST
RECEPTACLE
DIFFERENTIAL
DATA OUT
PIN PHOTODIODE
SINGLE-ENDED
The package includes internal
shields for the electrical and
optical subassemblies to ensure
low EMI emissions and high
immunity to external EMI
fields.
SIGNAL
DETECT OUT
QUANTIZER IC
PREAMP IC
OPTICAL
SUBASSEMBLIES
DIFFERENTIAL
DATA IN
LED
DRIVER IC
TOP VIEW
Figure 1a. ST Connector Block Diagram.
2
Case Temperature
Measurement Point
39.12
(1.540)
12.70
(0.500)
MAX.
6.35
(0.250)
AREA
RESERVED
FOR
PROCESS
25.40
(1.000)
12.70
(0.500)
MAX.
PLUG
HFBR-5805
DATE CODE (YYWW)
SINGAPORE
AGILENT
5.93 ± 0.1
(0.233 ± 0.004)
+ 0.08
0.75
– 0.05
3.30 ± 0.38
(0.130 ± 0.015)
+ 0.003
– 0.002
10.35
(0.407)
)
(0.030
MAX.
2.92
(0.115)
+ 0.25
– 0.05
18.52
(0.729)
1.27
+ 0.010
– 0.002
0.46
(0.018)
NOTE 1
4.14
(0.163
(0.050
)
Ø
(9x)
NOTE 1
17.32 20.32
(0.682 (0.800) (0.918)
23.32
23.55
(0.927)
20.32
(0.800)
16.70
(0.657)
[8x(2.54/ .100)]
0.87
23.24
(0.915)
15.88
(0.625)
(0.034)
NOTE 1: THE SOLDER POSTS AND ELECTRICAL PINS ARE PHOSPHOR BRONZE WITH TIN LEAD OVER NICKEL PLATING.
DIMENSIONS ARE IN MILLIMETERS (INCHES).
Figure 2. Package Outline Drawing
3
Case Temperature
Measurement Point
39.12
(1.540)
12.70
(0.500)
MAX.
6.35
(0.250)
AREA
RESERVED
FOR
PROCESS
25.40
(1.000)
12.70
(0.500)
MAX.
PLUG
HFBR-5805
DATE CODE (YYWW)
SINGAPORE
AGILENT
5.93 ± 0.1
(0.233 ± 0.004)
+ 0.08
0.75
– 0.05
3.30 ± 0.38
(0.130 ± 0.015)
+ 0.003
– 0.002
10.35
(0.407)
)
(0.030
MAX.
2.92
(0.115)
+ 0.25
– 0.05
18.52
(0.729)
1.27
+ 0.010
– 0.002
0.46
(0.018)
NOTE 1
4.14
(0.163
(0.050
)
Ø
(9x)
NOTE 1
17.32 20.32
(0.682 (0.800) (0.918)
23.32
23.55
(0.927)
20.32
(0.800)
16.70
(0.657)
[8x(2.54/ .100)]
0.87
23.24
(0.915)
15.88
(0.625)
(0.034)
NOTE 1: THE SOLDER POSTS AND ELECTRICAL PINS ARE PHOSPHOR BRONZE WITH TIN LEAD OVER NICKEL PLATING.
DIMENSIONS ARE IN MILLIMETERS (INCHES).
Figure 2a. ST Package Outline Drawing
1 = V
EE
N/ C
2 = RD
Rx
Tx
3 = RD
4 = SD
5 = V
CC
6 = V
CC
7 = TD
8 = TD
N/ C
9 = V
EE
TOP VIEW
Figure 3. Pin Out Diagram.
4
Application Information
represent the attenuation and
chromatic plus modal
dispersion losses associated
with the 62.5/125 µm and 50/
125 µm fiber cables only. The
area under the curves
represents the remaining OPB
at any link length, which is
available for overcoming non-
fiber cable related losses.
guaranteed performance of the
transceiver specifications in
this data sheet. This same
model has been used
extensively in the ANSI and
IEEE committees, including the
ANSI T1E1.2 committee, to
establish the optical
The Applications Engineering
group in the Agilent Fiber
Optics Communication Division
is available to assist you with
the technical understanding
and design trade-offs
associated with these trans-
ceivers. You can contact them
through your Agilent sales
representative.
performance requirements for
various fiber optic interface
standards. The cable
Agilent LED technology has
produced 1300 nm LED
devices with lower aging
characteristics than normally
associated with these
technologies in the industry.
The industry convention is 1.5
dB aging for 1300 nm LEDs.
The Agilent 1300 nm LEDs are
specified to experience less
than 1 dB of aging over
normal commerical equipment
mission life periods. Contact
your Agilent sales repre-
sentative for additional details.
parameters used come from the
ISO/IEC JTC1/SC 25/WG3
Generic Cabling for Customer
Premises per DIS 11801 docu-
ment and the EIA/TIA-568-A
Commercial Building Telecom-
munications Cabling Standard
per SP-2840.
The following information is
provided to answer some of
the most common questions
about the use of these parts.
Transceiver Optical Power Budget
versus Link Length
Optical Power Budget (OPB) is
the available optical power for
a fiber optic link to
accommodate fiber cable losses
plus losses due to in-line
connectors, splices, optical
switches, and to provide
12
HFBR-5805, 62.5/ 125 µm
10
8
HFBR-5805
50/ 125 µm
6
margin for link aging and
unplanned losses due to cable
plant reconfiguration or repair.
Figure 4 was generated for the
1300 nm transceivers with a
Agilent fiber optic link model
containing the current industry
conventions for fiber cable
specifications and the draft
ANSI T1E1.2. These optical
parameters are reflected in the
4
2
1.
0
Figure 4 illustrates the pre-
dicted OPB associated with the
transceiver series specified in
this data sheet at the Beginning
of Life (BOL). These curves
0
0.3 0.5
1.5
2.0
2.5
FIBER OPTIC CABLE LENGTH (km)
Figure 4. Optical Power Budget at BOL versus
Fiber Optic Cable Length.
5
Transceiver Signaling Operating
Rate Range and BER Performance
The transceivers may be used
for other applications at
signaling rates different than
155 Mb/s with some variation
in the link optical power
budget. Figure 5 gives an
indication of the typical
performance of these products
at different rates.
Transceiver Jitter Performance
The Agilent 1300 nm
For purposes of definition, the
symbol (Baud) rate, also called
signaling rate, is the reciprocal
of the symbol time. Data rate
(bits/sec) is the symbol rate
divided by the encoding factor
used to encode the data
transceivers are designed to
operate per the system jitter
allocations stated in Table B1
of Annex B of the draft ANSI
T1E1.2 Revision 3 standard.
The Agilent 1300 nm
transmitters will tolerate the
worst case input electrical
jitter allowed in Annex B
without violating the worst
case output jitter requirements.
(symbols/bit).
These transceivers can also be
used for applications which
require different Bit Error
Rate (BER) performance.
Figure 6 illustrates the typical
trade-off between link BER
and the receivers input optical
power level.
When used in 155 Mb/s
SONET OC-3 applications the
performance of the 1300 nm
transceivers, HFBR-5805 is
guaranteed to the full
The Agilent 1300 nm receivers
will tolerate the worst case
input optical jitter allowed in
Annex B without violating the
worst case output electrical
jitter allowed.
conditions listed in product
specification tables.
2.5
1 x 10-2
2.0
1.5
1.0
The jitter specifications stated
in the following 1300 nm
1 x 10-3
1 x 10-4
HFBR-5805 SERIES
transceiver specification tables
are derived from the values in
Tables B1 of Annex B. They
represent the worst case jitter
contribution that the trans-
ceivers are allowed to make to
the overall system jitter
without violating the Annex B
allocation example. In practice
the typical contribution of the
Agilent transceivers is well
below these maximum allowed
amounts.
1 x 10-5
1 x 10-6
CENTER OF SYMBOL
1 x 10-7
0.5
0
1 x 10-8
1 x 10-9
1 x 10-10
1 x 10-11
1 x 10-12
0.5
-6
-4
-2
0
2
4
0
25 50 75 100 125 150 175 200
SIGNAL RATE (MBd)
RELATIVE INPUT OPTICAL POWER - dB
CONDITIONS:
1. PRBS 27-1
2. DATA SAMPLED AT CENTER OF DATA SYMBOL.
3. BER = 10-6
4. TA = +25˚ C
5. VCC = 3.3 V to 5 V dc
6. INPUT OPTICAL RISE/ FALL TIMES = 1.0/ 2.1 ns.
CONDITIONS:
1. 155 MBd
2. PRBS 27-1
3. CENTER OF SYMBOL SAMPLING
4. TA = +25˚C
5. VCC = 3.3 V to 5 V dc
6. INPUT OPTICAL RISE/ FALL TIMES = 1.0/ 2.1 ns.
Figure 5. Transceiver Relative Optical Power
Budget at Constant BER vs. Signaling Rate.
Figure 6. Bit Error Rate vs. Relative Receiver
Input Optical Power.
6
Recommended Handling Precautions provided in the circuit board
“Common Transceiver
directly under the transceiver
Footprint” hole pattern defined
in the original multisource
announcement which defined
the 1 x 9 package style. This
drawing is reproduced in
Figure 8 with the addition of
ANSI Y14.5M compliant
dimensioning to be used as a
guide in the mechanical layout
of your circuit board.
Agilent recommends that
to provide a low inductance
normal static precautions be
ground for signal return
taken in the handling and
current. This recommendation
assembly of these transceivers
is in keeping with good high
to prevent damage which may
be induced by electrostatic
discharge (ESD).
The HFBR-5800 series of
transceivers meet MIL-STD-
883C Method 3015.4 Class 2
frequency board layout
practices.
Board Layout - Hole Pattern
The Agilent transceiver
complies with the circuit board
products.
Care should be used to avoid
shorting the receiver data or
signal detect outputs directly
to ground without proper
current limiting impedance.
Rx
Tx
Solder and Wash Process
Compatibility
NO INTERNAL CONNECTION
NO INTERNAL CONNECTION
The transceivers are delivered
with protective process plugs
inserted into the duplex SC or
duplex ST connector
HFBR-5805
TOP VIEW
receptacle. This process plug
protects the optical
subassemblies during wave
solder and aqueous wash
processing and acts as a dust
cover during shipping.
Rx
EE
1
Rx
CC
5
Tx
CC
6
Tx
EE
9
V
RD
2
RD
3
SD
4
V
V
TD
7
TD
8
V
These transceivers are compat-
ible with either industry
standard wave or hand solder
processes.
C1
C2
V
CC
R2
R3
C5
L1
L2
TERMINATION
AT PHY
DEVICE
Shipping Container
R1
R4
V
C3
C4
CC
The transceiver is packaged in
a shipping container designed
to protect it from mechanical
and ESD damage during
INPUTS
V
CC FILTER
AT VCC PINS
TRANSCEIVER
R9
R5
R7
TERMINATION
AT TRANSCEIVER
INPUTS
C6
R6
R8
shipment or storage.
R10
Board Layout - Decoupling Circuit
and Ground Planes
RD
RD
SD
V
TD
TD
CC
It is important to take care in
the layout of your circuit
board to achieve optimum
performance from these
transceivers. Figure 7 provides
a good example of a schematic
for a power supply decoupling
circuit that works well with
these parts. It is further
NOTES:
THE SPLIT-LOAD TERMINATIONS FOR ECL SIGNALS NEED TO BE LOCATED AT THE INPUT
OF DEVICES RECEIVING THOSE ECL SIGNALS. RECOMMEND 4-LAYER PRINTED CIRCUIT
BOARD WITH 50 OHM MICROSTRIP SIGNAL PATHS BE USED.
R1 = R4 = R6 = R8 = R10 = 130 OHMS FOR +5.0 V OPERATION, 82 OHMS FOR +3.3 V OPERATION.
R2 = R3 = R5 = R7 = R9 = 82 OHMS FOR +5.0 V OPERATION, 130 OHMS FOR +3.3 V OPERATION.
C1 = C2 = C3 = C5 = C6 = 0.1 µF.
C4 = 10 µF.
L1 = L2 = 1 µH COIL OR FERRITE INDUCTOR.
recommended that a
contiguous ground plane be
Figure 7. Recommended Decoupling and Termination Circuits
7
42.0
Board Layout - Art Work
The Applications Engineering
group has developed Gerber
file artwork for a multilayer
printed circuit board layout
incorporating the recommenda-
tions above. Contact your local
Agilent sales representative for
details.
24.8
9.53
(NOTE 1)
12.0
0.51
12.09
25.4
Board Layout - Mechanical
For applications interested in
providing a choice of either a
duplex SC or a duplex ST
connector interface, while
utilizing the same pinout on
the printed circuit board, the
ST port needs to protrude
from the chassis panel a
minimum of 9.53 mm for
sufficient clearance to install
the ST connector.
39.12
11.1
6.79
0.75
25.4
Please refer to Figure 8a for a
mechanical layout detailing the
recommended location of the
duplex SC and duplex ST
transceiver packages in
relation to the chassis panel.
NOTE 1: MINIMUM DISTANCE FROM FRONT
OF CONNECTOR TO THE PANEL FACE.
Figure 8a. Recommended Common Mechanical Layout for SC and ST 1 x 9 Connectored
Transceivers.
20.32
(0.800)
2 x Ø 1.9 ± 0.1
(0.075 ± 0.004)
9 x Ø 0.8 ± 0.1
(0.032 ± 0.004)
20.32
(0.800)
2.54
(0.100)
TOP VIEW
DIMENSIONS ARE IN MILLIMETERS (INCHES)
Figure 8. Recommended Board Layout Hole Pattern
8
Regulatory Compliance
The second case to consider is
through will provide 4.6 dB
static discharges to the exterior more shielding than one 1.2"
These transceiver products are
intended to enable commercial
system designers to develop
equipment that complies with
the various international
regulations governing certifica-
tion of Information Technology
Equipment. See the Regulatory
Compliance Table for details.
Additional information is
of the equipment chassis con-
taining the transceiver parts.
To the extent that the duplex
duplex SC rectangular cutout.
Thus, in a well-designed
chassis, the duplex ST 1 x 9
SC connector is exposed to the transceiver emissions will be
outside of the equipment
chassis it may be subject to
whatever ESD system level test
criteria that the equipment is
intended to meet.
identical to the duplex SC 1 x
9 transceiver emissions.
200
3.0
180
available from your Agilent
sales representative.
1.0
Electromagnetic Interference (EMI)
160
1.5
Most equipment designs
utilizing these high speed
transceivers from Agilent will
be required to meet the
requirements of FCC in the
United States, CENELEC
EN55022 (CISPR 22) in Europe
and VCCI in Japan.
Electrostatic Discharge (ESD)
140
2.0
There are two design cases in
which immunity to ESD
damage is important.
tr/ f – TRANSMITTER
OUTPUT OPTICAL
RISE/ FALL TIMES – ns
2.5
3.0
120
The first case is during
handling of the transceiver
prior to mounting it on the
circuit board. It is important
to use normal ESD handling
precautions for ESD sensitive
devices. These precautions
include using grounded wrist
straps, work benches, and
floor mats in ESD controlled
areas.
100
1260
1280
1300
1320
1340
1360
lC – TRANSMITTER OUTPUT OPTICAL RISE/
FALL TIMES – ns
These products are suitable for
use in designs ranging from a
desktop computer with a single
transceiver to a concentrator
or switch product with large
number of transceivers.
HFBR-5805 TRANSMITTER TEST RESULTS
OF lC, Dl AND tr/ f ARE CORRELATED AND
COMPLY WITH THE ALLOWED SPECTRAL WIDTH
AS A FUNCTION OF CENTER WAVELENGTH FOR
VARIOUS RISE AND FALL TIMES.
Figure 9. Transmitter Output Optical Spectral
Width (FWHM) vs. Transmitter Output Optical
Center Wavelength and Rise/ Fall Times.
In all well-designed chassis,
the two 0.5" holes required for
ST connectors to protrude
Regulatory Compliance Table
Feature
Test Method
Performance
Electrostatic Discharge (ESD) to MIL-STD-883C
Meets Class 1 (<1999 Volts).
the Electrical Pins
Method 3015.4
Withstand up to 1500 V applied between electrical pins.
Electrostatic Discharge (ESD) to Variation of
Typically withstand at least 25 kV without damage when the Duplex SC
the Duplex SC Receptacle
IEC 801-2
Connector Receptacle is contacted by a Human Body Model probe.
Electromagnetic Interference
FCC Class B
Transceivers typically provide a 13 dB margin (with duplex SC receptacle) or a 9
(EMI)
CENELEC CEN55022
Class B (CISPR 22B)
VCCI Class 2
dB margin (with duplex ST receptacles) to the noted standard limits when
tested at a certified test range with the transceiver mounted to a circuit card
without a chassis enclosure.
Immunity
Variation of
Typically show no measurable effect from a 10 V/ m field swept from 10 to 450
MHz applied to the transceiver when mounted to a circuit card without a
chassis enclosure.
IEC 801-3
9
5
4
3
2
1
0
Immunity
Transceiver Reliability and
Performance Qualification Data
Equipment utilizing these
transceivers will be subject to
radio-frequency
electromagnetic fields in some
environments. These
The 1 x 9 transceivers have
passed Agilent reliability and
performance qualification
testing and are undergoing
ongoing quality monitoring.
Details are available from your
Agilent sales representative.
HFBR-5805 SERIES
transceivers have a high
immunity to such fields.
For additional information
regarding EMI, susceptibility,
ESD and conducted noise
testing procedures and results
on the 1 x 9 Transceiver
family, please refer to
Applications Note 1075,
Testing and Measuring
Electromagnetic Compatibility
Performance of the HFBR-
510X/-520X Fiber Optic
Transceivers.
These transceivers are manu-
factured at the Agilent
Singapore location which is an
ISO 9002 certified facility.
-3
-2
-1
0
1
2
3
EYE SAMPLING TIME POSITION (ns)
CONDITIONS:
1. TA = +25˚ C
2. VCC = 3.3 V to 5 V dc
3. INPUT OPTICAL RISE/ FALL TIMES = 1.0/ 2.1 ns.
4. INPUT OPTICAL POWER IS NORMALIZED TO
CENTER OF DATA SYMBOL.
Ordering Information
The HFBR-5805/-5805T 1300
nm products are available for
production orders through the
Agilent Component Field Sales
Offices and Authorized
5. NOTE 16 AND 17 APPLY.
Figure 10. Relative Input Optical Power vs.
Eye Sampling Time Position.
Distributors world wide.
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause catastrophic damage to the device. Limits apply to each parameter in
isolation, all other parameters having values within the recommended operating conditions. It should not be assumed that limiting values
of more than one parameter can be applied to the product at the same time. Exposure to the absolute maximum ratings for extended
periods can adversely affect device reliability.
Parameter
Symbol
Min.
Typ.
Max.
Unit
Reference
Storage Temperature
T
S
-40
+100
°C
Lead Soldering Temperature
Lead Soldering Time
Supply Voltage
T
+260
10
°C
sec.
V
SOLD
tSOLD
V
CC
-0.5
-0.5
7.0
Data Input Voltage
Differential Input Voltage
Output Current
V
I
V
CC
V
V
D
1.4
50
V
Note 1
IO
mA
10
Recommended Operating Conditions
Parameter
Symbol
Min.
Typ.
Max.
Unit
Reference
Ambient Operating Temperature
HFBR-5805/ 5805T
TA
TA
V
CC
0
+70
°C
Note A
Note B
HFBR-5805A/ 5805AT
Supply Voltage
-10
3.135
+85
3.5
°C
V
V
4.75
5.25
V
V
V
W
CC
Data Input Voltage - Low
Data Input Voltage - High
Data and Signal Detect Output Load
Notes:
V - V
IL
-1.810
-1.165
-1.475
-0.880
CC
V - V
IH
CC
R
L
50
Note 2
A. Ambient Operating Temperature corresponds to transceiver case temperature of 0°C mininum to +85 °C maximum with necessary airflow applied.
Recommended case temperature measurement point can be found in Figure 2.
B. Ambient Operating Temperature corresponds to transceiver case temperature of -10 °C mininum to +100 °C maximum with necessary airflow
applied. Recommended case temperature measurement point can be found in Figure 2.
Transmitter Electrical Characteristics
(HFBR-5805/ 5805T: T = 0°C to +70°C, V = 3.135 V to 3.5 V or 4.75 V to 5.25 V)
A
CC
(HFBR-5805A/ 5805AT: T = -10°C to +85°C, V = 3.135 V to 3.5 V or 4.75 V to 5.25 V)
A
CC
Parameter
Symbol
Min.
Typ.
Max.
Unit
Reference
Supply Current
ICC
135
175
mA
Note 3
Power Dissipation
at VCC = 3.3 V
at VCC = 5.0 V
PDISS
PDISS
0.45
0.67
-2
0.6
0.9
W
W
Data Input Current - Low
I
IL
-350
µA
µA
Data Input Current - High
I
IH
18
350
Receiver Electrical Characteristics
(HFBR-5805/ 5805T: T = 0°C to +70°C, V = 3.135 V to 3.5 V or 4.75 V to 5.25 V)
A
CC
(HFBR-5805A/ 5805AT: T = -10°C to +85°C, V = 3.135 V to 3.5 V or 4.75 V to 5.25 V
A
CC
Parameter
Symbol
Min.
Typ.
Max.
Unit
Reference
Supply Current
ICC
87
120
mA
Note 4
Power Dissipation
at VCC = 3.3 V
at VCC = 5.0 V
PDISS
PDISS
0.15
0.3
0.25
0.45
-1.620
-0.880
2.2
W
W
V
Note 5
Data Output Voltage - Low
Data Output Voltage - High
Data Output Rise Time
VOL - V
-1.840
-1.045
0.35
Note 6
Note 6
Note 7
Note 7
Note 6
Note 6
Note 7
Note 7
CC
VOH - V
V
CC
tr
ns
ns
V
Data Output Fall Time
tf
0.35
2.2
Signal Detect Output Voltage - Low
Signal Detect Output Voltage - High
Signal Detect Output Rise Time
Signal Detect Output Fall Time
VOL - V
-1.840
-1.045
0.35
-1.620
-0.880
2.2
CC
VOH - V
V
CC
tr
ns
ns
tf
0.35
2.2
11
Transmitter Optical Characteristics
(HFBR-5805/ 5805T: T = 0°C to +70°C, V = 3.135 V to 3.5 V or 4.75 V to 5.25 V)
A
CC
(HFBR-5805A/ 5805AT: T = -10°C to +85°C, V = 3.135 V to 3.5 V or 4.75 V to 5.25 V)
A
CC
Parameter
Output Optical Power
Symbol
Min.
-19
Typ.
Max.
-14
Unit
dBm avg.
Reference
Note 8
BOL
EOL
PO
PO
62.5/ 125 µm, NA = 0.275 Fiber
-20
Output Optical Power
BOL
EOL
-22.5
-23.5
-14
dBm avg.
Note 8
50/ 125 µm, NA = 0.20 Fiber
Optical Extinction Ratio
0.05
0.2
-45
%
Note 9
Output Optical Power at
Logic “0” State
PO (“0”)
dBm avg.
Note 10
l C
Dl
tr
Center Wavelength
Spectral Width - FWHM
Optical Rise Time
1270
1310
137
1.9
1380
nm
nm
ns
Note 22
Note 22
0.6
0.6
3.0
3.0
Note 11, 22
Figure 9
Optical Fall Time
tf
1.6
ns
Note 11, 22
Figure 9
Systematic Jitter Contributed
by the Transmitter
SJ
RJ
1.2
ns p-p
ns p-p
Note 12
Random Jitter Contributed
by the Transmitter
0.69
Note 13
Receiver Optical and Electrical Characteristics
(HFBR-5805/ 5805T: T = 0°C to +70°C, V = 3.135 V to 3.5 V or 4.75 V to 5.25 V)
A
CC
(HFBR-5805A/ 5805AT: T = -10°C to +85°C, V = 3.135 V to 3.5 V or 4.75 V to 5.25 V)
A
CC
Parameter
Input Optical Power
Symbol
Min.
Typ.
-34
Max.
-30
Unit
dBm avg.
Reference
Note 14
PIN Min. (W)
PIN Min. (C)
Minimum at Window Edge
Figure 10
Input Optical Power
-35
-31
dBm avg.
Note 15
Minimum at Eye Center
Figure 10
Input Optical Power Maximum
Operating Wavelength
PIN Max.
-14
dBm avg.
nm
Note 14
l
1270
1380
1.2
Systematic Jitter Contributed
by the Receiver
SJ
ns p-p
Note 16
Note 17
Random Jitter Contributed
by the Receiver
RJ
1.91
-31
ns p-p
Signal Detect - Asserted
Signal Detect - Deasserted
Signal Detect - Hysteresis
PA
PD +1.5 dB
dBm avg.
dBm avg.
dB
Note 18
Note 19
PD
-45
1.5
0
PA - PD
Signal Detect Assert Time
(off to on)
2
8
100
350
µs
Note 20
Note 21
Signal Detect Deassert Time
(on to off)
0
µs
square-wave) input signal, the average
optical power is measured. The data “1”
peak power is then calculated by adding
3 dB to the measured average optical
power. The data “0” output optical power is
found by measuring the optical power when
the transmitter is driven by a logic “0” input.
The extinction ratio is the ratio of the optical
power at the “0” level compared to the
optical power at the “1” level expressed as
a percentage or in decibels.
Notes:
• At the Beginning of Life (BOL)
1. This is the maximum voltage that can be
applied across the Differential Transmitter
Data Inputs to prevent damage to the input
ESD protection circuit.
• Over the specified operating temperature
and voltage ranges
23
• Input is a 155.52 MBd, 2 - 1 PRBS data
pattern with 72 “1”s and 72 “0”s inserted
per the CCITT (now ITU-T) recommenda-
tion G.958 Appendix I.
2. The outputs are terminated with 50 W
connected to V -2 V.
CC
3. The power supply current needed to operate
the transmitter is provided to differential
ECL circuitry. This circuitry maintains a
nearly constant current flow from the power
supply. Constant current operation helps to
prevent unwanted electrical noise from
being generated and conducted or emitted
to neighboring circuitry.
• Receiver data window time-width is
1.23 ns or greater for the clock recovery
circuit to operate in. The actual test data
window time-width is set to simulate the
effect of worst case optical input jitter
based on the transmitter jitter values
from the specification tables. The test
window time-width is HFBR-5805 3.32 ns.
10. The transmitter will provide this low level of
Output Optical Power when driven by a logic
“0” input. This can be useful in link
troubleshooting.
11. The relationship between Full Width Half
Maximum and RMS values for Spectral
Width is derived from the assumption of a
Gaussian shaped spectrum which results in
a 2.35 X RMS = FWHM relationship.
4. This value is measured with the outputs
• Transmitter operating with a 155.52 MBd,
77.5 MHz square-wave, input signal to
simulate any cross-talk present between
the transmitter and receiver sections of
the transceiver.
terminated into 50 W connected to V - 2 V
and an Input Optical Power level of
-14 dBm average.
CC
The optical rise and fall times are measured
from 10% to 90% when the transmitter is
driven by a 25 MBd (12.5 MHz square-wave)
input signal. The ANSI T1E1.2 committee
has designated the possibility of defining an
eye pattern mask for the transmitter optical
output as an item for further study. Agilent
will incorporate this requirement into the
specifications for these products if it is
defined. The HFBR-5805 products typically
comply with the template requirements of
CCITT (now ITU-T) G.957 Section 3.2.5,
Figure 2 for the STM-1 rate, excluding the
optical receiver filter normally associated
with single mode fiber measurements which
is the likely source for the ANSI T1E1.2
committee to follow in this matter.
5. The power dissipation value is the power
dissipated in the receiver itself. Power
dissipation is calculated as the sum of the
products of supply voltage and currents,
minus the sum of the products of the output
voltages and currents.
15. All conditions of Note 14 apply except that
the measurement is made at the center of
the symbol with no window time-width.
16. Systematic Jitter contributed by the
receiver is defined as the combination of
Duty Cycle Distortion and Data Dependent
Jitter. Systematic Jitter is measured at 50%
threshold using a 155.52 MBd (77.5 MHz
6. This value is measured with respect to V
CC
with the output terminated into 50 W
connected to V - 2 V.
CC
7
square-wave), 2 - 1 psuedo random data
7. The output rise and fall times are measured
between 20% and 80% levels with the
pattern input signal.
output connected to V -2 V through 50 W.
17. Random Jitter contributed by the receiver is
specified with a 155.52 MBd (77.5 MHz
square-wave)input signal.
CC
8. These optical power values are measured
with the following conditions:
18. This value is measured during the transition
from low to high levels of input optical
power.
• The Beginning of Life (BOL) to the End of
Life (EOL) optical power degradation is
typically 1.5 dB per the industry
convention for long wavelength LEDs.
The actual degradation observed in
Agilent’s 1300 nm LED products is
< 1 dB, as specified in this data sheet.
12. Systematic Jitter contributed by the
transmitter is defined as the combination of
Duty Cycle Distortion and Data Dependent
Jitter. Systematic Jitter is measured at 50%
threshold using a 155.52 MBd
19. This value is measured during the transition
from high to low levels of input optical
power.
7
20. The Signal Detect output shall be asserted
within 100 µs after a step increase of the
Input Optical Power.
(77.5 MHz square-wave), 2 -1 psuedo
• Over the specified operating voltage and
temperature ranges.
random data pattern input signal.
13. Random Jitter contributed by the
transmitter is specified with a 155.52 MBd
(77.5 MHz square-wave) input signal.
• With 25 MBd (12.5 MHz square-wave),
inputsignal.
21. Signal detect output shall be de-asserted
within 350 µs after a step decrease in the
Input Optical Power.
• At the end of one meter of noted optical
fiber with cladding modes removed.
14. This specification is intended to indicate the
performance of the receiver section of the
transceiver when Input Optical Power signal
characteristics are present per the following
definitions. The Input Optical Power
22. The HFBR-5805 transceiver complies with
the requirements for the trade-offs between
center wavelength, spectral width, and rise/
fall times shown in Figure 9. This figure is
derived from the FDDI PMD standard (ISO/
IEC 9314-3 : 1990 and ANSI X3.166 - 1990)
per the description in ANSI T1E1.2 Revision
3. The interpretation of this figure is that
values of Center Wavelength and Spectral
Width must lie along the appropriate Optical
Rise/ Fall Time curve.
The average power value can be converted
to a peak power value by adding 3 dB.
Higher output optical power transmitters
are available on special request.
dynamic range from the minimum level (with
a window time-width) to the maximum level
is the range over which the receiver is
9. The Extinction Ratio is a measure of the
modulation depth of the optical signal. The
data “0” output optical power is compared
to the data “1” peak output optical power
and expressed as a percentage. With the
transmitter driven by a 25 MBd (12.5 MHz
guaranteed to provide output data with a Bit
Error Ratio (BER) better than or equal to 1 x
-10
10
.
www.agilent.com/
semiconductors
For product information and a complete list
of distributors, please go to our web site.
For technical assistance call:
Americas/ Canada: +1 (800) 235-0312 or
(408)654-8675
Europe: +49 (0) 6441 92460
China:108006500017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152(Domestic/ Inter
national),or0120-61-1280(DomesticOnly)
Korea: (+65) 6755 1989
Singapore,Malaysia,Vietnam,Thailand,
Philippines, Indonesia:(+65)67552044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2003 Agilent Technologies, Inc.
Obsoletes:5988-9314EN
March 1, 2005
5989-2605EN
相关型号:
HFBR-5805AT
HFBR-5805/5805T/5805A/5805AT ATM Transceivers for SONET OC-3/SDH STM-1 in Low Cost 1 x 9 Package Style
AGILENT
HFBR-5805AT
HFBR-5805/5805T/5805A/5805AT ATM Transceivers for SONET OC-3/SDH STM-1 in Low Cost 1 x 9 Package Style
HP
HFBR-5805T
HFBR-5805/5805T/5805A/5805AT ATM Transceivers for SONET OC-3/SDH STM-1 in Low Cost 1 x 9 Package Style
AGILENT
HFBR-5805T
HFBR-5805/5805T/5805A/5805AT ATM Transceivers for SONET OC-3/SDH STM-1 in Low Cost 1 x 9 Package Style
HP
©2020 ICPDF网 联系我们和版权申明