2957-1000 [HRS]
Rectangular, Multiple-Position Rack/Panel Insulation Displacement Connectors;
| 型号： | 2957-1000 |
| 厂家： | 
HRS |
| 描述： | Rectangular, Multiple-Position Rack/Panel Insulation Displacement Connectors |
| 文件： | 总12页 (文件大小：521K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Rectangular, Multiple-Position Rack/Panel Insulation Displacement Connectors (IDC)
QR/P18 Series
ꢀOverview
Power supply contact male unit
The QR/P18 Series of miniature rack/panel connectors is
External holder
designed for the complete segmentation of the structure of the
external holder/terminal units of the well-received QR/P Series
of plug-in rectangular rack/panel connectors; furthermore, the
Power supply contact
female unit
subsequent insertion of the harnessed terminal unit affords a
more efficient harness mounting task. These connectors are
configured with 12, 18, or 24 (insulation displacement
Power supply
male contacts
connection) positions in the signal portion, and 4 (crimp)
positions in the power supply portion.
Signal contact
female unit
ꢀFeatures
Panel
Power supply
1. Completely segmented structure of the external
female contacts
holder/terminal unit
Signal contact
male unit
In order to improve the harness mounting task, the connectors are
designed for the complete segmentation of the external holder and the
signal/power supply unit, and the method of subsequently inserting
harnessed products aims to improve the workability of the power
supply/signal section harness as well as the mounting of the set.
2.5 Gbps Eye Pattern Waveform
2. Signal unit
The signal unit uses the highly reliable insulation displacement
connection method. (The wire is AWG #26 and the insulation outside
diameter is 0.88 mm.)
The insulation displacement task can now be used by fitting a special
applicator to a commercially available automatic insulation
displacement machine, or a manual press can also be selected.
3. Power supply portion
The power supply terminals permit the use of a crimp harness
using wire of AWG #16 to 18 (and insulation outside diameter
of 2.1 to 2.2 mm), and can accommodate a maximum of 12 A.
2.5Gbps
Scale
4. Sequenced structure
X : 100psec/div
Y : 100V/div
AWG28 2m
Connectors possess two sequenced contacts in the signal
male unit and one sequenced contact in the power supply
female unit making them perfect in terms of safety too.
ꢀApplications
5. Panel installation
PPC, transmitting and receiving devices,
data communications equipment, vending
machines, measuring instruments, factory
automation equipment, and other high-
speed transfer applications, etc.
Installation to a panel uses a single-action method on the
anchored side and a floating screw structure on the floating side
which permits smooth insertion and disconnection without forcing.
6. RoHS compliant
All components and materials comply with the requirements of the
EU Directive 2002/95/EC.
*
A portion of this series is suitably constructed for high-speed differential
transfer, and using a suitable cable, transfer of 2.5Gbps per pair is possible.
2007.4
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀProduct Specifications
125 V AC (Signal contacts)
Voltage rating
300V AC (Power contacts)
1A (Signal contacts)
12A (Power contacts)
-40ç to +105ç
(Note 1)
Ratings
Operating temperature range
Current rating
Specification
Item
Conditions
50mø max. (Signal contacts) (Note 2)
10mø max. (Power contacts) (Note 2)
1. Contact resistance
100 mA
1000Mø min. (Signal contacts)
5000Mø min. (Power contacts)
No flashover or insulation breakdown.
500 V DC
2. Insulation resistance
3. Withstanding Voltage
500 V AC / one minute
3000 cycles
4. Durability (mating / Contact resistance: 70mø max. (Signal contacts)
un-mating)
20mø max. (Power contacts)
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours in each of the 3 axis.
Acceleration of 490 m/s , 11 ms duration, sine half-wave
5. Vibration
No electrical discontinuity of 10µs or more.
No damage, cracks, or parts dislocation.
2
6. Shock
waveform, 3 cycles in each of the 3 axis
Temperature: -55çꢀ+5ç to +35çꢀ+105çꢀ+5ç to +35ç
Contact resistance: 70mø max. (Signal contacts)
20mø max. (Power contacts)
No damage, cracks, or parts dislocation.
Time: 30
5 cycles
ꢀ5ꢀ30ꢀ5 (Minutes)
7. Temperature cycle
Insulation resistance: 100M
ø
ø
min. (Signal contacts, state)
min. (Power contacts, state) 96 hours at 40ç and RH 90% to 95%
8. Humidity
(Steady state)
3000M
No damage, cracks, or parts dislocation.
9. Salt mist
No corrosions.
5% salt water solution for 48 hours
Note1: Includes temperature rise caused by current flow.
Note2: Excludes wire conductor resistance.
ꢀMaterials
Components
Insulator
Insulator
Female contacts
Male contacts
Insulator
Female contacts
Male contacts
Female contacts
Male contacts
Products
External holder
Material
PBT
PA
Finish
---------------
---------------
Gold plated
Gold plated
---------------
Gold plated
Gold plated
Remarks
UL94V-0
UL94V-0
---------------
--------------
UL94V-0
--------------
--------------
--------------
--------------
Phosphor bronze
Phosphor bronze
Signal contact unit
PBT
Phosphor bronze
Phosphor bronze
Copper alloy
Power contact unit
Gold plated + Tin copper plated
Gold plated + Tin copper plated
Power supply contacts
Copper alloy
ꢀFunction Diagram
ꢀPower supply/signal combination type
QR/P18-Pπ4S QR/P18-Sπ4S-π
QR/P17-PCA-π11(50) QR/P18-4P-C
QR/P18-4S-C QR/P17-SCA-π11(50)
QR/P18-πSπ
QR/P18-πPπ
ꢀSignal type
QR/P18-Sπ QR/P18-Pπ
QR/P18-πPπ
QR/P18-πSπ
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀOrdering information
ꢀExternal holder.
QR / P18 - S A 4 P - A
1
2
3
4
5
6
Series name
Number of power contact
Power contact type S: Female contact
P: Male contact
Applicable panel thickness
A: 2mm
B: 1.5mm
1
2
4
5
Signal contact type
S: Female contact
P: Male contact
Number of signal contact of external holder
A: 12 pos. (Contact pitch 1.5mm)
B: 18 pos. (Contact pitch 1.5mm)
C: 24 pos. (Contact pitch 1.5mm)
3
6
ꢀSignal contact termination block
QR / P18 - 12 S A
1
2
3
4
Series name
Number of signal contact
Signal contact type
Number of signal contact of signal contact
termination block
1
2
3
4
S: Female contact
P: Male contact
A: 12 pos. (Contact pitch 1.5mm)
B: 18 pos. (Contact pitch 1.5mm)
C: 24 pos. (Contact pitch 1.5mm)
ꢀPower contact insert
QR / P18 - 4 P - C
1
2
3
4
Series name
Number of power contact
Power contact type
Connector type
C: Crimp housing
1
2
3
4
S: Female contact
P: Male contact
ꢀPower contact
QR / P17 - PC A - 1 1 1
1
2
3
4
5
6
Series name
1
2
4
Packaging
1: Pack packaging
2: Reel packaging
Power contact type PC: Male crimp contact
SC: Female crimp contact
Applicable wire
Contact plating
1: AWG#16 to 18
1: Gold plated
5
6
Applicable wire style A: UL1015
3
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀExternal holder
Mated condition (Shown for reference)
Panel
Panel
QR/P18-Sπ4P-A
QR/P18-Pπ4S
QR/P15-SCREW
2
23
26.5
2
2.5
5.1
6.15
29
7.4
Note: Establish panel mounting so that the mating gap
dimensions of the power supply side and the
signal side are 1.5 mm or less.
ꢀFemale power contact, male signal contact type
Applicable panel thickness: 2.0mm
Panel cutout
A
B
(2)
20.7 +0.1
0
2-M3∞0.5
10.5 0.1
13.9+0.1
Die roll side should be
connector mating side.
0
Number of contacts
Part number
CL No.
A
B
C
D
RoHS
YES
Signal
12
Power
QR/P18-PA4S
QR/P18-PB4S
QR/P18-PC4S
CL221-0293-8
CL221-0313-3
CL221-0297-9
4
4
4
54.65
58.65
63.15
46.25
50.25
54.75
46.25
50.25
54.75
27.2
31.2
35.7
18
24
Panel attachment screw (QR/P15-SCREW CL221-0251-8) is optional.
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀMale power contact, female signal contact type
Applicable panel thickness: 2.0mm
Panel cutout
A
B
(2)
20.7 +0.1
0
2-M3∞0.5
10.5 0.1
13.9+0.1
Die roll side should be
connector mating side.
0
Number of contacts
Part number
CL No.
A
B
C
D
RoHS
YES
Signal
12
Power
QR/P18-SA4P-A
QR/P18-SB4P-A
QR/P18-SC4P-A
CL221-0294-0
CL221-0315-9
CL221-0298-1
4
4
4
43.85
47.85
52.35
37.9
41.9
46.4
27.25
31.25
35.75
17.3
21.3
25.8
18
24
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀExternal holder (Signal type)
Mated condition (Shown for reference)
QR/P18-Sπ-B
QR/P18-Pπ
QR/P15-SCREW
Panel
1.5
1.5
5.1
15
2.5
7.4
3
17.5
Note: Establish panel mounting so that the mating gap
dimensions of the power supply side and the
signal side are 1.5 mm or less.
ꢀMale signal contact type
Applicable panel thickness: 1.5mm
Panel cutout
(15)
t=1.5
C+0.2
0
D+0.2
2-M3∞0.5
0
E
0.1
Die roll side should be
connector mating side.
B
A
Number of contacts
Part number
CL No.
A
B
C
D
E
RoHS
YES
Signal
18
24
QR/P18-PB
QR/P18-PC
CL221-0309-6
CL221-0311-8
37.7
42.2
29.5
34.0
27.0
31.5
23.5
28.0
29.5
34.0
Panel attachment screw (QR/P15-SCREW CL221-0251-8) is optional.
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀFemale signal contact type
Applicable panel thickness: 1.5mm
Panel cutout
(15)
t=1.5
C+0.2
0
D+0.2
2-M3∞0.5
0
E
0.1
Die roll side should be
connector mating side.
B
A
Number of contacts
Part number
CL No.
A
B
C
D
RoHS
YES
Signal
18
24
QR/P18-SB-B
QR/P18-SC-B
CL221-0310-5
CL221-0312-0
28.05
32.55
25.1
29.6
13.00
15.25
07.3
11.8
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀSignal contact termination block
ꢀMale, contact pitch 1.5mm
15
Sequence contact
Sequence contact
Number of
contacts
12
A
B
RoHS
YES
Part number
CL No.
QR/P18-12PA
QR/P18-18PB
QR/P18-24PC
CL221-0291-2
CL221-0285-0
CL221-0295-3
13.5
17.5
22.0
14.0
18.0
22.5
18
24
Adscable cable: AWG#26, insulator diameter 0.88mm
ꢀFemale, contact pitch 1.5mm
15
Number of
contacts
12
A
B
RoHS
YES
Part number
CL No.
QR/P18-12SA
QR/P18-18SB
QR/P18-24SC
CL221-0292-5
CL221-0286-2
CL221-0296-6
13.5
17.5
22.0
14.0
18.0
22.5
18
24
Applicable cable: AWG#26, insulator diameter 0.88mm
8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀPower contact insert
ꢀMale
15.9
17.9
Part number
CL No.
RoHS
YES
QR/P18-4P-C
CL221-0316-1
ꢀFemale
Sequence contact(No.4)
13.5
16.2
Part number
CL No.
RoHS
YES
QR/P18-4S-C
CL221-0314-6
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀPower contact
ꢀMale contact
3
Applicable
wire size
16-18
Part number
CL No.
Applicable cable
Packaging
Q'ty
RoHS
YES
QR/P17-PCA-111(50)
QR/P17-PCA-211(50)
CL221-0265-2-50
CL221-0263-7-50
AWG16~18 UL1015
AWG16~18 UL1015
Bag
Reel
100
3000
Applicable cable: AWG#16 to 18, insulator diameter 2.1mm to 3.2mm
ꢀFemale contact
4
Applicable wire size
Part number
CL No.
Applicable cable
Packaging
Q'ty
RoHS
YES
QR/P17-SCA-111(50)
QR/P17-SCA-211(50)
CL221-0264-0-50
CL221-0262-4-50
AWG16~18 UL1015
AWG16~18 UL1015
Bag
Reel
100
3000
Applicable cable: AWG#16 to 18, insulator diameter 2.1mm to 3.2mm
10
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BTools
ꢀSignal contact termination block IDC tool
Type
Part number
Applicable connector
QR/P18-12PA
QR/P18-12SA
QR/P18-18PB
QR/P18-18SB
QR/P18-24PC
QR/P18-24SC
QR/P18-12PA
QR/P18-18PB
QR/P18-24PC
QR/P18-12SA
QR/P18-18SB
QR/P18-24SC
Hand press for 12 pos.
QR/P18-12/IDCR-MP
Hand press for 18 pos.
Hand press for 24 pos.
QR/P18-18/IDCR-MP
QR/P18-24/IDCR-MP
Automatic IDC applicator for male
signal contact
2957-1000
2957-1500
Automatic IDC applicator for female
signal contact
Automatic IDC machine (Murata kogyo co., Ltd., P/N MS-01) is available.
ꢀPower contact crimp tool
Type
Part number
Applicable contact
QR/P17-PCA-111(50)
QR/P17-SCA-111(50)
QR/P17-PCA-211(50)
QR/P17-SCA-211(50)
QR/P17-PCA-211(50)
QR/P17-SCA-211(50)
QR/P17-PCA-111(50)
QR/P17-SCA-111(50)
QR/P17-PCA-211(50)
QR/P17-SCA-211(50)
Hand tool
HT104/QR/P17-1
Applicable for automatic crimp
machine
AP105-QR/P17-1
AP105-QR/P17-1
Automatic crimp machine
CM-105
Extraction tool
QR/P17-TC
11
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀInspection After Cable Wiring
ꢀSignal contact unit
Signal contact unit (male)
Signal contact unit (female)
Cable
B
Cable
A
A
B
0~0.5
0~0.5
Cable end position
Cable end position
A-A
B-B
Insulation displacement height
Insulation displacement height
Insulation height
Insulation height
(1) After wiring the cable, examine the cable end position, the insulation displacement height, and the insulation height.
(2) In examining the insulation displacement height and the insulation height, use a measurement pin having a tip of 0.5 mm diameter.
(3) For information about the detailed inspection method, please request the "Inspection Standards Manual" from Hirose Electric.
(4) The inspection method of the diagrams is for cable with AWG #26 wire and an insulation outside diameter of 0.88 mm.
ꢀPower supply contacts
Male contact
Female contact
Cable
Cable
Spring
Spring
Before inserting the power supply contacts into the power supply terminal unit, check that the spring portion illustrated in the
diagram is not misshapen.
When the spring portion is less than the dimensions indicated in the diagram, the spring could pull out from the power supply
terminal unit; therefore, the specified dimensions should be maintained.
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
12
相关型号：
©2020 ICPDF网 联系我们和版权申明