AP105-DF7-1618(62) [HRS]
Tool And Machinery;
| 型号： | AP105-DF7-1618(62) |
| 厂家： | 
HRS |
| 描述： | Tool And Machinery 连接器 连接器支架 |
| 文件： | 总15页 (文件大小：550K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TÜV Listed)
DF7 Series
Complete
Locking
Function
Completely
enclosed
locking system
Full barrier
between adjacent
contacts.
Prevention of
Incorrect Connections
ꢀFeatures
1. Complete Locking Function
Reliable interior lock protects mated connectors from
accidental disconnection.
2. Increased Contact Retention of Crimped
Contacts and Prevention of Incomplete
Insertion
Separate contact retainer increases the contact
retention, assures and visually confirms the complete
contact insertion.
3. Molded-in Contact Retention Tabs
Handling of terminated contacts during the assembly and
termination is easier and avoids entangling of wires,
since there are no protruding metal tabs.
4. Incorrect Insertion Prevention
Guide post
Connectors are polarized to assure correct mating with
corresponding parts.
Board Eyelet mounting
5.Solder Crack Prevention
Glass reinforced resin is used in the pin header bodies to
prevent solder cracks caused by the heat shrinkage.
6. Prevention of Incorrect Board Placement
Built-in locating posts assure correct connector
placement and orientation on the board.(2-12 pos.)
7. Supports Sealing after Installation.
Sealing compound can be applied to the board installed
connector for distance of 6 mm max. from the mounting
surface (9 mm max. for single position).
8.Cost Effective Tooling
The same crimping tools are used to terminate socket
and pin contacts.
One pos. type can also be mounted
to boards that have eyelets.
9. Prevention of Short Circuits between
Adjacent Contacts
Each contact is completely surrounded by the insulator
housing, electrically isolating it from adjacent contacts.
Continued.
B95
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
10. 10 A maximum Current
12. Supports Eyelets
Connector can carry current of 10 A per contact with
#16 AWG conductor.Refer to page 3 for current
ratings for multi-position connectors using other
conductor sizes.
1 pos. can be mounted to boards which have eyelets
attached.
ꢀApplications
11. Color Variations
Office equipment, power supplies for industrial, medical
and instrumentation applications, variety of consumer
electronic and electrical applications.
1 pos. is available in a standard 3 colors: natural,
blue, and red.
Crimp Sockets
ꢀSingle row
ꢀDouble rows
Retainer
(optional, order separately)
Shown with terminated
and installed contacts.
Refer to page 8 for details.
Shown with terminated
and installed contacts.
Refer to page 11 for details.
Header
In-line plug
Refer to page 10 for details.
ꢀSingle row, straight type
ꢀDouble rows, straight type
ꢀPanel lock type
Shown with
terminated and installed contacts.
Refer to page 6 for details.
Refer to page 4 for details. Refer to page 10 for details.
Single row, right angle type Double row, right angle type
ꢀ
ꢀ
Shown with
terminated and installed contacts.
Refer to page 7 for details.
Refer to page 5 for details. Refer to page 10 for details.
ꢀOrdering information
ꢀ
Socket, Header
Series name: DF7, DF7A
Applicable Conductor
1
2
3
6
7
Number of contacts: 1 to 12
Connector type
1618: AWG 16 to AWG 18
2022: AWG 20 to AWG 22
2426: AWG 24 to AWG 26
Packaging
DF7 -
S - 3.96 C
*
2
S: Socket
1
3
4
5
DS: Double-row socket
P: Header
SCF: Socket contacts / Reel
SC: Socket contacts / Bag
PCF: Plug contacts / Reel
PC: Plug contacts / Bag
DP: Double-row Header
EP: In-line plug
ꢀContacts
RS/P: Retainer
DF7 -
SCF
**
6
Contact pitch: 3.96mm(7.92 mm)
Type of housing: header
C: Crimp housing
4
5
1
7
DSA: Straight header
DS: Right-angle header
Blank: Retainer
B96
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀProduct Specifications
Row
No. of contacts
AWG16
10A
10A
9A
AWG18
7A
AWG20
5A
AWG22
4A
1
1~10
Operating temperature range -35ç to 85ç (Note 1)
Operating humidity range
4
6
9A
7A
6A
20% to 80%
Current
rating
8A
6A
5A
2
8
9A
8A
6A
5A
Storage temperature range -10çto 60ç (Note 2)
Storage humidity range 40% to 70% (Note 2)
Ratings
10
12
8A
7A
5A
4A
8A
7A
5A
4A
AC 630V
AC 600V
UL/C-UL/TÜV File No.and Recognition No
Specificatoin
UL/C-UL
UL
:E52653
Voltage
rating
AC 600V(7.92mm pitch)
AC 300V (3.96mm pitch)
C-UL
TÜV
:E52653
TÜV
:R9750437
Item
Specification
Condition
11. Contact resistance Contact resistance(Initial value)
12. Insulator resistance 1000 M ohms min.
10 m ohms max. 20mV max., 1mA
500 V DC
13. Withstanding voltage No flashover or Insulator breakdown
1500 V AC for 1 minute
14. Insertion-Extraction force
0.3N min., 4.5N max.
(per contact)
Measured with a steel pin of 0.64 x 1.2 0.002 mm
Contact resistance of 20 m ohms max.
15. Durability
30 cycles
(mating/unmating)
Frequency 10 to 55 Hz, single amplitude of 0.75 mm, 3 axis, 2
hours
16. Vibration
No momentary disconnections of 1 µs min.
2
Acceleration of 490 m/s , 11 ms duration, sine half-wave
17. Shock
No electrical discontinuity of 1 µs. min.
Contact resistance 20 m ohms max.
waveform, 3 cycles in each of the 3 axis.
18. Humidity
Temperature 40ç 2ç, 90% to 95% RH, 96 hours
(-55ç: 30 minutes ꢀ 5 to 35ç: 5 minutes ꢀ 85ç: 30 minutes ꢀ 5
to 35ç: 5 minutes) for 5 cycles
19. Temperature cycle Contact resistance of 20 m ohms max.
10. Resistance to
soldering heat
No deformation of the insulator parts affecting
performance
Flow solder temperature 250ç, 10 seconds
Manual soldering: Soldering iron temperature 300ç, 3 seconds
Note 1: Includes temperature rise caused by the current flow.
Note 2: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
ꢀMaterials
Product
Part
Material
Polyamide
Finish
Color: White
Remarks
Sockets
Insulator
UL94V-0
Polyamide
Color: Beige (Single row)
Color: Grey (Double row)
Tin plating (Note)
Color: White
Insulator
UL94V-0
Headers
(Glass reinforced)
High conductivity copper alloy
Polyamide
Contact
Insulator
Insulator
Contacts
----------------
UL94V-0
UL94V-0
----------------
In-line plug
Retainer
Polyamide
Color: Black
Crimp contacts
High conductivity copper alloy
Tin plating (Note)
Note: Hirose Electric's plating incorporates anti-whisking compounds.
B97
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀ Straight header
Part Number
CL No.
Number of contacts
A
B
DF7- 1P-3.96DSA
DF7- 2P-3.96DSA
DF7- 3P-3.96DSA
DF7- 4P-3.96DSA
DF7- 5P-3.96DSA
DF7- 6P-3.96DSA
DF7- 7P-3.96DSA
DF7- 8P-3.96DSA
DF7- 9P-3.96DSA
DF7-10P-3.96DSA
DF7- 2P-7.92DSA
DF7- 3P-7.92DSA
DF7- 4P-7.92DSA
DF7- 5P-7.92DSA
CL680-0133-1
CL680-0036-5
CL680-0037-8
CL680-0038-0
CL680-0039-3
CL680-0040-2
CL680-0041-5
CL680-0042-8
CL680-0043-0
CL680-0044-3
CL680-0108-4
CL680-0109-7
CL680-0110-6
CL680-0111-9
1
2
-------------
10.40
14.36
18.32
22.28
26.24
30.20
34.16
38.12
42.08
14.36
22.28
30.20
38.12
-------------
3.96
3
7.92
4
11.88
15.84
19.80
23.76
27.72
31.68
35.64
7.92
5
6
7
8
9
1 Pos.
10
2
3
15.84
23.76
31.68
4
5
Note 1) Bag packaging (100 pieces/bag). Order by number of bags.
Note 2) The 2 pos. type does not have walls on both sides.
Note 3) DF7-2P-7.92DSA plug has #2 contact positions of DF7-3P-3.96DSA without contacts inserted and the number of pos. indication is 2.
(Mating receptacle: DF7#-3S-3-96C)
DF7-3P-7.92DSA plug has #2 and #4 contact positions of DF7-5P-3.96DSA without contacts inserted and the number of pos. indication is 3.
(Mating receptacle: DF7#-5S-3-96C)
DF7-4P-7.92DSA plug has #2, #4 and #6 contact of DF7-7P-3.96DSA without contacts inserted and the number of pos. indication is 4.
(Mating receptacle: DF7#-7S-3-96C)
DF7-5P-7.92DSA plug has #2, #4, #6 and #8 contact positions of DF7-9P-3.96DSA without contacts inserted and the number of pos. indication is 5.
(Mating receptacle: DF7#-9S-3-96C)
2 to 10 Pos.
A
1 Pos.
2 to 10 Pos.
B
No. of contacts
indicator (Note3)
7.8
P=3.96
6.44
1 0
1
(Note1)
(Note2)
9E26
0.84
Production Lot No.
M0.64
Cavity No.
A
Cavity No.
2.49
Ø1.4
6 L 0 9
Production Lot No.
B PCB mounting pattern (Board thickness: 1.6 0.1)
Eyelet
Ø3.9 MAX
1 Pos.
Board
2 to 10 Pos.
Soldering side
Ø5 MAX
Note 5: One pos. type can also be mounted to boards
that have installed eyelets.
8
0.1
+0.1
_0.3
5.4
P=3.96 0.05(7.92 0.05)
0.1
+0.15 for eyelet
Ø1.6 _0.25
B
2.49 0.05
+0.1
_0
1.4
mm Without eyelet
B98
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀ Right angle header
A
P=3.96
(Note1)
6L09
A
10
Production Lot No.
Cavity No.
3.5
No. of contacts indicator (Note2)
B
1.1
1.1
9.5
10
A
Ø1.4
1.4
C
Part Number
CL No.
Number of contacts
A
B
C
Quantity per tray
DF7- 2P-3.96DS(24)
DF7- 3P-3.96DS(24)
DF7- 4P-3.96DS(24)
DF7- 5P-3.96DS(24)
DF7- 6P-3.96DS(24)
DF7- 7P-3.96DS(24)
DF7- 8P-3.96DS(24)
DF7- 9P-3.96DS(24)
DF7-10P-3.96DS(24)
DF7- 2P-7.92DS(24)
DF7- 3P-7.92DS(24)
DF7- 4P-7.92DS(24)
DF7- 5P-7.92DS(24)
CL680-0081-0-24
CL680-0082-2-24
CL680-0083-5-24
CL680-0084-8-24
CL680-0085-0-24
CL680-0086-3-24
CL680-0087-6-24
CL680-0088-9-24
CL680-0089-1-24
CL680-0124-0-24
CL680-0125-3-24
CL680-0126-6-24
CL680-0127-9-24
2
3
3.96
7.92
10.40
14.36
18.32
22.28
26.24
30.20
34.16
38.12
42.08
14.36
22.28
30.20
38.12
8.40
114
84
66
60
48
42
36
36
30
84
60
42
36
12.36
16.32
20.28
24.24
28.20
32.16
36.12
40.08
12.36
20.28
28.20
36.12
4
11.88
15.84
19.80
23.76
27.72
31.68
35.64
7.92
5
6
7
8
9
10
2
3
15.84
23.76
31.68
4
5
Note 1) Tray packaging. Order by number of quantity in the tray.
Note 2) DF7-2P-7.92DS plug has #2 contact positions of DF7-3P-3.96DS without contacts inserted and the number of pos. indication is 2.
(Mating receptacle: DF7#-3S-3-96C)
DF7-3P-7.92DS plug has #2 and #4 contact positions of DF7-5P-3.96DS without contacts inserted and the number of pos. indication is 3.
(Mating receptacle: DF7#-5S-3-96C)
DF7-4P-7.92DS plug has #2, #4 and #6 contact of DF7-7P-3.96DS without contacts inserted and the number of pos. indication is 4.
(Mating receptacle: DF7#-7S-3-96C)
DF7-5P-7.92DS plug has #2, #4, #6 and #8 contact positions of DF7-9P-3.96DS without contacts inserted and the number of pos. indication is 5.
(Mating receptacle: DF7#-9S-3-96C)
B PCB mounting pattern (Board thickness: 1.6 0.1)
P=3.96 0.05(7.92 0.05)
A 0.1
C 0.05
B99
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀ In-line plug (Panel lock type)
Part Number
CL No.
Number of contacts
A
B
C
DF7- 1EP-3.96C
DF7- 2EP-3.96C
DF7- 3EP-3.96C
DF7- 4EP-3.96C
DF7- 5EP-3.96C
DF7- 6EP-3.96C
DF7- 7EP-3.96C
DF7- 8EP-3.96C
DF7- 9EP-3.96C
DF7-10EP-3.96C
CL680-0134-4
CL680-0018-3
CL680-0019-6
CL680-0020-5
CL680-0021-8
CL680-0022-0
CL680-0023-3
CL680-0024-6
CL680-0025-9
CL680-0026-1
1
2
6.44
13.96
17.40
21.36
25.32
29.28
33.24
37.20
41.16
45.12
49.08
-------------
3.96
10.40
14.36
18.32
22.28
26.24
30.20
34.16
38.12
42.08
7.92
3
11.88
15.84
19.80
23.76
27.72
31.68
35.64
4
5
Shown with terminated
and installed contacts.
1 Pos.
6
7
8
9
10
Note1: Bag packaging (100 pieces/bag). Order by number of bags.
Note2: Refer to page 10 for retainer.
Shown with terminated
and installed contacts.
2 to 10 Pos.
1 Pos.
2 to 10 Pos.
3
A
B
3
12.44
6.44
P=3.96
9.5
No. of contacts
indicator
A 1
Cavity No.
B
10
Cavity No.
No. of contacts indicator
Contact No.1
indicator
A 1
13.96
C
B Panel Cutout
1 Pos.
2 to 10 Pos.
(11.32+X)+0.1
0
6.84+0.1
0
(C-Y)+0.1
0
(A+0.4)+0.1
0
10 0.2
X
Y
2.0
1.6
1.2
0.8
1.44
0.96
0.48
0
0.88
0.96
1.44
1.92
B100
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀ In-line Plug
Shown with terminated
and installed contacts.
Shown with terminated
and installed contacts.
1 Pos.
2 to 10 Pos.
1 Pos.
2 to 10 Pos.
6.44
A
B
P=3.96
(Note2)
9.5
No. of contacts
indicator
A
1
Cavity No.
10
B
Cavity No.
No. of contacts indicator
Contact No.1
indicator
A
1
Part Number
CL No.
Number of contacts
A
B
DF7A- 1EP-3.96C
DF7A- 2EP-3.96C
DF7A- 3EP-3.96C
DF7A- 4EP-3.96C
DF7A- 5EP-3.96C
DF7A- 6EP-3.96C
DF7A- 7EP-3.96C
DF7A- 8EP-3.96C
DF7A- 9EP-3.96C
DF7A-10EP-3.96C
CL680-0135-7
CL680-0072-9
CL680-0073-1
CL680-0074-4
CL680-0075-7
CL680-0076-0
CL680-0077-2
CL680-0078-5
CL680-0079-8
CL680-0080-7
1
2
6.44
10.40
14.36
18.32
22.28
26.24
30.20
34.16
38.12
42.08
-------------
3.96
3
7.92
4
11.88
15.84
19.80
23.76
27.72
31.68
35.64
5
6
7
8
9
10
Note1: Bag packaging (100 pieces/bag). Order by number of bags.
Note2: Refer to page 10 for retainer.
B101
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀ Crimp Sockets
Shown with terminated
and installed contacts.
Shown with terminated
and installed contacts.
1 Pos.
2 to 10 Pos.
1 Pos.
2 to 10 Pos.
A
B
5.5
P=3.96
1
Contact No.1 indicator
(Note 3)
Cavity No.
No. of contacts indicator
Cavity No.
A
1
1
2
3
4
5
6
7
8
9
10
B
No. of contacts indicator
Part Number
CL No.
Number of contacts
A
B
DF7- 1S-3.96C
DF7- 2S-3.96C
DF7- 3S-3.96C
DF7- 4S-3.96C
DF7- 5S-3.96C
DF7- 6S-3.96C
DF7- 7S-3.96C
DF7- 8S-3.96C
DF7- 9S-3.96C
DF7-10S-3.96C
CL680-0132-9
CL680-0009-2
CL680-0010-1
CL680-0011-4
CL680-0012-7
CL680-0013-0
CL680-0014-2
CL680-0015-5
CL680-0016-8
CL680-0017-0
1
2
5.50
-------------
3.96
10.00
13.96
17.92
21.88
25.84
29.80
33.76
37.72
41.68
3
7.92
4
11.88
15.84
19.80
23.76
27.72
31.68
35.64
5
6
7
8
9
10
Note1: Bag packaging (100 pieces/bag). Order by number of bags.
Note2: Refer to page 10 for retainer.
B102
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀ Retainer
1 Pos.
2 to 10 Pos.
1 Pos.
2 to 10 Pos.
A
B
3
P=3.96
6.6
2.2
2.2
1
B
Cavity No.
B
10
No. of contacts indicator
Cavity No.
No. of contacts indicator
Part Number
CL No.
Number of contacts
A
B
DF7- 1RS/P-3.96
DF7- 2RS/P-3.96
DF7- 3RS/P-3.96
DF7- 4RS/P-3.96
DF7- 5RS/P-3.96
DF7- 6RS/P-3.96
DF7- 7RS/P-3.96
DF7- 8RS/P-3.96
DF7- 9RS/P-3.96
DF7-10RS/P-3.96
CL680-0136-0
CL680-0027-4
CL680-0028-7
CL680-0029-0
CL680-0030-9
CL680-0031-1
CL680-0032-4
CL680-0033-7
CL680-0034-0
CL680-0035-2
1
2
-------------
10.00
13.96
17.92
21.88
25.84
29.80
33.76
37.72
41.68
-------------
3.96
3
7.92
4
11.88
15.84
19.80
23.76
27.72
31.68
35.64
5
6
7
8
9
10
Note1: Bag packaging (100 pieces/bag). Order by number of bags.
Note2: Retainer is common to sockets, in-line plug.
B103
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A
B
ꢀ Double-row Straight Header
No. of
contacts
Cavity No.
P=3.96
indicator
10
A
1.26
Contact No.1
indicator
M0.64
Part Number
CL No.
Number of contacts
A
B
Quantity per tray
132
96
B
PCB mounting pattern
(Board thickness: 1.6 0.1)
DF7- 4DP-3.96DSA(24) CL680-0145-0-24
DF7- 6DP-3.96DSA(24) CL680-0146-3-24
DF7- 8DP-3.96DSA(24) CL680-0147-6-24
DF7-10DP-3.96DSA(24) CL680-0148-9-24
DF7-12DP-3.96DSA(24) CL680-0149-1-24
4
6
10.40
14.36
3.96
7.92
2.22
B
0.1
1.4
P=3.96 0.05
8
18.32 11.88
22.28 15.84
26.24 19.80
72
10
12
60
54
Note: Tray packaging. Order by number of trays quantity.
Contact No.1
2.22 0.05
A
B
C
ꢀ Double-row Right angle Header
P=3.96
2.2
Contact No.1 indicator
3.5
No. of
contacts
indicator
Cavity No.
A
A
Part Number
CL No.
Number of contacts
A
B
C
Quantity per tray
B
PCB mounting pattern
DF7- 4DP-3.96DS(24) CL680-0150-0-24
DF7- 6DP-3.96DS(24) CL680-0151-3-24
DF7- 8DP-3.96DS(24) CL680-0152-6-24
DF7-10DP-3.96DS(24) CL680-0153-9-24
DF7-12DP-3.96DS(24) CL680-0154-1-24
4
6
10.40 8.40 3.96
14.36 12.36 7.92
18.32 16.32 11.88
22.28 20.28 15.84
26.24 24.24 19.80
88
64
48
40
36
(Board thickness: 1.6 0.1)
B
C
0.1
0.1
8
3.96 0.05
10
12
Note: Tray packaging. Order by number of trays quantity.
Contact No.1
B104
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀ Double-row Socket
A
B
P=3.96
(16)
(17.2)
Contact No.1
Enhanced ergonomic lock
Standard Lock
9
1
2
A
10
No. of contacts indicator
Cavity No.
ꢀꢀStandard lock
Part Number
ꢀꢀEnhanced ergonomic lock
CL No.
Number of contacts
A
B
Part Number
CL No.
Number of contacts
A
B
DF7-4DS-3.96C
DF7-6DS-3.96C
DF7-8DS-3.96C
DF7-10DS-3.96C
DF7-12DS-3.96C
4
6
10.00
13.96
17.92
21.88
25.84
3.96
DF7A-4DS-3.96C
DF7A-6DS-3.96C
DF7A-8DS-3.96C
DF7A-10DS-3.96C
DF7A-12DS-3.96C
CL680-0160-4
CL680-0161-7
CL680-0162-0
CL680-0163-2
CL680-0164-5
4
6
10.00
13.96
17.92
21.88
25.84
3.96
Reserved For
product
7.92
7.92
8
11.88
15.84
19.80
8
11.88
15.84
19.80
expansion
10
12
10
12
Note: Bag packaging (100 pieces/bag). Order by number of bags.
B105
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀ Crimp Contact
ꢀꢀFemale Contact
ꢀꢀMale Contact
2.4
2.35
2.5
1.3
0.64
AWG No.
16
18
AWG No.
16
18
0.8
P=11
t=0.25
P=11
t=0.25
Part Number
CL No.
Packaging
Quantity
Finish
CL680-0001-0
CL680-0002-3
CL680-0003-6
CL680-0004-9
CL680-0005-1
CL680-0006-4
CL680-0007-7
CL680-0008-0
Reel
Bag
Reel
Bag
Reel
Bag
Reel
Bag
3,000
100
3,000
100
3,000
100
3,000
100
DF7-1618SCF
DF7-1618SC
DF7-2022SCF
DF7-2022SC
DF7-1618PCF
DF7-1618PC
DF7-2022PCF
DF7-2022PC
Tin plating
ꢀꢀApplicable cable (Tin plated annealed copper wire)
Jacket diameter
Wire size(Stranded wire conductor)
UL style
AWG#16(26/0.254mm)
AWG#18(34/0.18mm)
AWG#20(21/0.18mm)
AWG#22(17/0.16mm)
AWG#16(26/0.254mm)
AWG#18(34/0.18mm)
AWG#20(21/0.18mm)
AWG#22(17/0.16mm)
2.1 to 2.5mm
UL1007
1.6 to 1.9mm
2.9 to 3.2mm
2.4 to 2.7mm
UL1015
Note 1: Applicable wire with tin plated solid soft conductor.
Note 2: When using other than the recommended wire, contact your nearest Hirose representative.
Note 3: Strip length: 3.0 to 3.8mm.
ꢀ Tools
Type
Press unit
Part Number
CL No.
Applicable Contacts
CM-105
CL901-0005-4
CL901-4554-4
CL901-4553-1
CL550-0268-0
CL550-0269-3
----------------
Automatic
Manual
AP105-DF7-1618
AP105-DF7-2022
HT104/DF7-1618
HT104/DF7-2022
DF7-1618SCF/DF7-1618PCF
DF7-2022SCF/DF7-2022PCF
DF7-1618SC/DF7-1618PC
DF7-2022SC/DF7-2022PC
Applicator
Crimp tools
B106
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B Mating Dimensions
ꢀꢀSocket to Straight Header Connection
DF7-*S-3.96C
1 pos. 2 to 12 pos.
A
B
C
18.5
09.0
20.3
20.0
08.5
21.5
DF7_*S_3.96C
DF7_*RS/P_3.96
DF7_*P_3.96DSA
ꢀꢀSocket to Straight Header Connection (Double-row)
(17.7)
(16.5)
DF7_*DS_3.96C
DF7A_*DS_3.96C
DF7_*DP_3.96DSA(24)
DF7_*DS_3.96DSA(24)
ꢀꢀSocket to Right angle Header Connection
DF7_*S_3.96C
26.6
25.1
DF7_*P_3.96DS
DF7_*RS/P_3.96
ꢀꢀSocket to Right angle Header Connection (Double-row)
DF7A_*DS_3.96C
(28.1)
DF7_*DS_3.96C
(28.1)
DF7_*DP_3.96DS(24)
DF7_*DP_3.96DS(24)
B107
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀꢀSocket to In-line Plug (Panel mount type) Connection
D
E
DF7_*S_3.96C
DF7_*EP_3.96C
1 pos.
35.1
2 to 12 pos.
37.0
D
E
DF7_*RS/P_3.96
32.1
34.0
ꢀꢀ Socket to In-line Plug Connection
F
DF7A_*EP_3.96C
G
DF7_*S_3.96C
1 pos.
2 to 12 pos.
37.0
F
35.1
32.1
DF7_*RS/P_3.96
G
34.0
B108
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B Contact Extraction Procedure
ꢀꢀContact extraction tool: Flat-bladed screwdriver, 1.4 mm blade width
ꢀꢀUse with crimp Contacts: DF7-1618SC(F), DF7-2022SC(F),
DF7-1618PC(F), DF7-2022PC(F)
ꢀꢀWork Method
Housing Cross-Section
1. Refer to the drawing No. 1. Insert
Flat-bladed screwdriver
correct size screwdriver in the
insulator against the molded-in
lance. Deflect the lance as shown.
Molded-in lance
Pull-out direction
2. Assure that the lance is deflected
to release the contact and pull- out
wire with the terminated contact.
B General Use Precautions
ꢀꢀMake sure that the lock is fully depressed before un-mating the connectors.
ꢀꢀUse correct size of the wires. Do NOT forcefully twist or deform wires, as this may affect the crimped
contact connection.
ꢀꢀWhen the potting process is to be performed, please take into consideration the surface tension of
the resin when filling.
B109
相关型号：
©2020 ICPDF网 联系我们和版权申明