BM15FR0.7-40DS-0.35V(51) [HRS]
Board Connector, 40 Contact(s), 2 Row(s), Female, Straight, 0.014 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Receptacle;型号: | BM15FR0.7-40DS-0.35V(51) |
厂家: | HRS |
描述: | Board Connector, 40 Contact(s), 2 Row(s), Female, Straight, 0.014 inch Pitch, Surface Mount Terminal, Locking, Black Insulator, Receptacle |
文件: | 总8页 (文件大小:472K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
0.35mm pitch, 0.7/0.8mm mated height, high retention Strength
Connectors PCB-to-PCB and PCB-to-FPC Connectors
BM15FR Series
Complies with RoHS
PCB Board area
Product width=1.98mm
Width=1.98mm
Pitch=0.35mm
Height=0.7, 0.8mm
Occupied PCB width= 2.32mm
Features
Highly reliable contact structure
[1]High retention strength is resistant to pull out forces.
The strength is created by a “pocket and bump” contact
locking grooves and locking metal fittings
1. High retention strength
Metal fittings in the locking mechanism assure high
pull-out forces.
2. Space-saving
Locking groove
Space-saving design with a depth of a of 2mm max.
and a pitch of 0.35mm.
Depth DS side :1.98mm, DP side:1.58mm
3. High contact reliability
The BM15 provides high contact reliability with its
2-point contact structure, while maintaining the low
mated height of 0.7 or 0.8mm.
Locking metal fitting
Locking metal fitting
4. PCB layout
Fig.1. Geometry of the contact locking groove and the
locking metal fitting
The outstanding electrical insulation on the bottom
side of the BM15FR connectors and the PCB
provides flexibility and lifts PCB layout restrictions.
When mated
Header
Locking groove
5. Enhanced operability
The guide rib ensures correct alignment during
mating with a self alignment range of 0.3mm.
In addition, a tactile click and improves operability.
6. Protection against shock and vibration
When extracted
The lock mechanism of the plug contact absorbs
forces caused by impact or vibration.
Receptacle
Locking salient
Fig.2. Structure of the locking metal fitting
Retention force is
at least twice that of existing products
[2] 2-point contact structure
Two highly-reliable contact points
1
2015.11q
BM15FR Series●0.35mm pitch, 0.7/0.8mm mated height, high retention force Board-to-Board and Board-to-FPC Connectors
Product specifications
Rated
current
Rated
Operation
Storage
0.3A
–35 to 85°C (Note 1)
20 to 80 % RH
-10 to 60°C (Note 2)
40-70% RH (Note 2)
Rated
value
temperature range
Operation humidity
range
temperature range
Storage humidity
range
AC,DC 30V
Voltage
Items
Specifications
Conditions
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
Minimum of 50Mø
Measured at DC 100V
AC 100V for one minute
No flashover or dielectric breakdown.
Maximum of 100mø
Measured at AC20mV, 1kHz, and 1mA
Frequency: 10 to 55 Hz; half amplitude: 0.75
mm,
in 3 directions for 2 hours
Left for 96 hours at 40 °C 2 °C and humidity
of 90 to 95 %
4. Vibration resistance
5. Moisture resistance
6. Temperature cycle
No electrical discontinuity of 1µs or greater.
Contact resistance: a maximum of 100mø;
insulation resistance: a minimum of 25Mø
(-55°C for 30 minutes 5 to 35 °C for 10
→
Contact resistance: a maximum of 100mø;
insulation resistance: a minimum of 50Mø
minutes 85 °C for 30 minutes 5 to 35 °C
→
→
for 10 minutes) in 5 cycles
7. Mating cycles
Contact resistance: a maximum of 100mø
10 times
Reflow: Hand soldering at the recommended
temperature profile with the temperature of the
solder iron at 350°C for 3 seconds
No melting of resin parts that will effect the
performance.
8. Solder heat resistance
Note 1 : Includes temperature rise caused by current flow.
Note 2 : The term “storage” refers to the long-term-storage status of unused items before mounting on the PCB.
The operating temperature/humidity ranges apply to the unmated state after board mounting.
Material
Item
Part
Material
Finish
UL specification
Receptacle
Header
Insulator
Contact
LCP
Phosphor bronze
Black
Gold plating
UL94V-0
---------------
Part Number Structure
Refer to this page for product specifications and model types.
The characteristics and specifications of the product described in this catalog are reference values. Please make sure to
check the latest delivery specifications at the time of purchase.
Receptacle/header
( )
BM 15 FR 0.8 − * DS − 0.35 V 51
❹
❺
❻
❼
❽
Series Name: BM
Series No. : 15
Stack
Connector type
DS: Double row receptacle
DP: Double row header
Indication Stacking height
Shape designation
Receptacle
FR: With locking metal fitting
Header
0.7
0.8
0.7mm
0.8mm
0.7mm
0.8mm
Receptacle
Header
Contact pitch: 0.35mm
Terminal shape V: Straight SMT
Package type
(51): Embossed tape packaging
(15,000 pcs/reel)
None
0.8
❾
FR: With locking metal fitting
Number of contacts
2
BM15FR Series●0.35mm pitch, 0.7/0.8mm mated height, high retention force Board-to-Board and Board-to-FPC Connectors
H=0.7/0.8mm receptacle
A
B
P=0.35
C
0.38
D
Recommended PCB layout
Recommended metal mask dimensions
(mask thickness 100µm)
B 0.02
B 0.02
P=0.35 0.02
P=0.35 0.01
0.18 0.02
0.18 0.01
0
E 0.02
F 0.02
E-0.05
F+0.05
0
[mm]
HRS No.
No. of contacts
A
B
C
D
E
F
Height
0.7
Part No.
G
BM15FR0.7-10DS-0.35V(51)
BM15FR0.7-20DS-0.35V(51)
BM15FR0.7-24DS-0.35V(51)
BM15FR0.7-30DS-0.35V(51)
BM15FR0.7-40DS-0.35V(51)
BM15FR0.8-10DS-0.35V(51)
BM15FR0.8-20DS-0.35V(51)
BM15FR0.8-22DS-0.35V(51)
BM15FR0.8-24DS-0.35V(51)
BM15FR0.8-30DS-0.35V(51)
BM15FR0.8-40DS-0.35V(51)
673-1269-0 51
10
20
24
30
40
10
20
22
24
30
40
4.02
1.4
2.88
2.1
3.66
5.77 3.15 0.12 4.63 3.85 5.41
6.47 3.85 5.33 4.55 6.11
7.52 4.9 6.38 5.6 7.16
9.27 6.65 8.13 7.35 8.91
4.02 1.4 2.88 2.1 3.66
5.77 3.15 4.63 3.85 5.41
6.12 3.5 4.98 4.2 5.76
6.47 3.85 5.33 4.55 6.11
7.52 4.9 6.38 5.6 7.16
9.27 6.65 8.13 7.35 8.91
0.7
Under planning
0.1
0.12
0.1
673-1225-5 51
673-1227-0 51
673-1220-1 51
673-1229-6 51
673-1244-0 51
Under planning
0.8
0.8
Note 1 : This product is sold on 15,000 pcs/reel reels. Please place orders in full reel quantities.
Note 2 : This connector has no polarity.
Note 3 : Please contact our sales dept. for pin counts not listed above.
3
BM15FR Series●0.35mm pitch, 0.7/0.8mm mated height, high retention force Board-to-Board and Board-to-FPC Connectors
H=0.7/0.8mm Header
A
B
P=0.35
0.12
0.26
C
Recommended PCB layout
Recommended metal mask dimensions
(mask thickness 100µm)
B 0.02
B 0.02
P=0.35 0.02
P=0.35 0.01
0.18 0.02
0.18 0.01
D 0.02
0
D -0.05
E 0.02
E +0.05
0
[mm]
Part No.
HRS No.
No. of contacts
A
B
C
D
E
F
Height
0.7
BM15FR-10DP-0.35V(51)
BM15FR-20DP-0.35V(51)
BM15FR-24DP-0.35V(51)
BM15FR-30DP-0.35V(51)
BM15FR-40DP-0.35V(51)
673-1272-5 51
10
20
24
30
40
10
20
22
24
30
40
2.92
4.67
5.37
6.42
8.17
2.92
4.67
5.02
5.37
6.42
8.17
1.4
3.15
3.85
4.9
2.5
4.25
4.95
6
1.97
3.72
4.42
5.47
7.22
1.97
3.72
4.07
4.42
5.47
7.22
2.8
4.55
5.25
6.3
0.46
Under planning
6.65
1.4
7.75
2.5
8.05
2.8
BM15FR0.8-10DP-0.35V(51)
BM15FR0.8-20DP-0.35V(51)
BM15FR0.8-22DP-0.35V(51)
BM15FR0.8-24DP-0.35V(51)
BM15FR0.8-30DP-0.35V(51)
BM15FR0.8-40DP-0.35V(51)
673-1226-8 51
673-1228-3 51
673-1224-2 51
673-1230-5 51
673-1243-7 51
Under planning
3.15
3.5
4.25
4.6
4.55
4.9
0.62
0.8
3.85
4.9
4.95
6
5.25
6.3
6.65
7.75
8.05
Note 1 : This product is sold on 15,000 pcs/reel. Please place orders in full reel quantities.
Note 2 : This connector has no polarity.
Note 3 : Please contact our sales dept. for pin counts not listed above.
4
BM15FR Series●0.35mm pitch, 0.7/0.8mm mated height, high retention force Board-to-Board and Board-to-FPC Connectors
Embossed tape dimension diagram (based on JIS C 0806)
Receptacle
Header
H-H
H-H
L± ±.15
±.3± ±.1
4
±.1 ꢀ ±.1 4 ±.1
4± ±.1 ꢀ± ±.1 4± ±.1
L
±.15
H
±.3± ±.1
H
Unreeling direction
Unreeling direction
H
H
G
G
G
G
G-G
G-G
Reel dimension diagram
Product label
Ø1.5 feed
hole diameter
M± ±.5
(M+4)± 1
[mm]
Height
0.7
Part No.
HRS No.
No. of contacts
J
K
L
M
BM15FR0.7-10DS-0.35V(51)
BM15FR0.7-20DS-0.35V(51)
BM15FR0.7-24DS-0.35V(51)
BM15FR0.7-30DS-0.35V(51)
BM15FR0.7-40DS-0.35V(51)
BM15FR0.8-10DS-0.35V(51)
BM15FR0.8-20DS-0.35V(51)
BM15FR0.8-22DS-0.35V(51)
BM15FR0.8-24DS-0.35V(51)
BM15FR0.8-30DS-0.35V(51)
BM15FR0.8-40DS-0.35V(51)
673-1269-0 51
10
20
24
30
40
10
20
22
24
30
40
16
7.5
17.5
21.5
0.85
Under planning
24
16
24
11.5
7.5
673-1225-5 51
673-1227-0 51
673-1220-1 51
673-1229-6 51
673-1244-0 51
Under planning
17.5
21.5
0.8
0.95
11.5
Height
0.7
Part No.
HRS No.
No. of contacts
J
K
L
M
BM15FR-10DP-0.35V(51)
BM15FR-20DP-0.35V(51)
BM15FR-24DP-0.35V(51)
BM15FR-30DP-0.35V(51)
BM15FR-40DP-0.35V(51)
BM15FR0.8-10DP-0.35V(51)
BM15FR0.8-20DP-0.35V(51)
BM15FR0.8-22DP-0.35V(51)
BM15FR0.8-24DP-0.35V(51)
BM15FR0.8-30DP-0.35V(51)
BM15FR0.8-40DP-0.35V(51)
673-1272-5 51
10
20
24
30
40
10
20
22
24
30
40
12
5.5
13.5
16
7.5
0.61
17.5
Under planning
24
12
11.5
5.5
21.5
13.5
673-1226-8 51
673-1228-3 51
673-1224-2 51
673-1230-5 51
673-1243-7 51
Under planning
0.8
16
24
7.5
0.76
17.5
21.5
11.5
5
BM15FR Series●0.35mm pitch, 0.7/0.8mm mated height, high retention force Board-to-Board and Board-to-FPC Connectors
Usage Recommendations
1.Recommended
temperature profile
MAX250ç
220ç
250
220
180
180ç
150
100
150ç
25
0
TIME(SECONDS)
MAX 60
SECONDS
(60 SECONDS)
90~120 SECONDS
PRE-HEATING TIME
SOLDERING TIME
[Conditions]
1. Peak temperature At a peak of 250ꢀC
2. Heating part
Minimum of 220ꢀC Maximum of 60 seconds
3. Preheating part 150-180ꢀC
90-120sec
4. Number of times Maximum of 2 times
Note 1 : Temperature is the surface temperature of the PCB in the connector lead portion area.
Note 2 : When using a nitrogen reflow process, please mount the product with the oxygen
concentration at a minimum of 1,000 [ppm].
Please contact us if the concentration is below 1,000 [ppm].
2.Recommended hand
soldering conditions
Soldering iron temperature: 340 10ꢀCꢁ soldering time: within 3 seconds.
3.Recommended screen
thickness/aperture ratio
(pattern area ratio)
Thickness: 0.1mm
Contact aperture ratio: 95% on the DS sideꢁ 95% on the DP side, aperture ratio of the metal.
fitting: 100% for both DS and DP.
4.Warpage of the PCB
5.Cleaning
A maximum of 0.02mm at the center part of the connector based on both ends of the connector
Not recommended. If you clean this product, please re-evaluate its performance before using it.
Cleaning may cause a change in the mating/unmating properties as well as environmental
resistances.
6.Notes
Mating/unmating the product when it is not mounted on the PCB could cause damage or
deformation of the contact.
■
Avoid supporting the PCB only by connectors. The board should be supported by other means
such as with posts and screws on the PCB.
■
Improper mating/unmating can cause damage to the contacts.
■
■
When hand soldering, please do not apply excess amounts of flux as this could cause flux
wicking.
This product may differ slightly in color due to production lot variability, but color variation has
no influence on the performance.
■
Please refer to the next page for the precautions for mating/unmating.
■
■
To prevent the possibility of unmating caused by dropping, impact and routing of FPC, it is
recommended to stabilize the connector in the mated state by using housings or cushioning
materials.
6
BM15FR Series●0.35mm pitch, 0.7/0.8mm mated height, high retention force Board-to-Board and Board-to-FPC Connectors
Notes when mating connector
Guide rib
(Blue part)
Position the two connectors together by hand for the initial mating operation. This product is equipped with a guide rib on the
outer wall of the mold (blue + red areas noted in the figure above) for correct mating. Position the male side connector so that
the female side connector is positioned into chamfer indicated by the blue area.
Do not apply excessive force during the initial mating operation. Too much force will cause damage and or shaving of the
mold. This may lead to a failure in contact resistance.
After the initial mating is accomplished, the connectors will drop down in to the fully mated state
7
BM15FR Series●0.35mm pitch, 0.7/0.8mm mated height, high retention force Board-to-Board and Board-to-FPC Connectors
Notes when unmating connector
OK
OK
NG
Hirose recommends unmating in a vertical direction
OK
If it is difficult to remove the connector, detach it in an angled direction along the long axis of the connector. Be careful not to
remove the connector in the short axis direction, as doing so puts a heavy load on the contact. When removing it in the short
axis direction, be sure to pull out the tipped-up end of the FPC in the vertical direction. (A horizontal force will produce a heavy
load on the contact.)
NG
NG
Please use a proper stiffener on the back of the FPC. We recommend using a glass epoxy material with a minimum thickness
of 0.3mm or a stainless steel material with a minimum of thickness of 0.2mm. If the FPC stiffener is not rigid enough, solder
separation (peeling) and connector breakage could occur during unmating. Be sure to properly test the FPC and soldering
specifications, etc. Additionally, attempting to remove the FPC at an angle while holding the corner will produce a heavy load
on the contact.
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 11/2015. Contents are subject to change without notice for the purpose of improvements.
8
相关型号:
BM1601-7PAHF
DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, METAL, CASE M02, MODULE
BEL
BM1601-7PD0A
DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, METAL, CASE M02, MODULE
BEL
BM1601-7PD0AF
DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, METAL, CASE M02, MODULE
BEL
BM1601-7PD0AFU
DC-DC Regulated Power Supply Module, 1 Output, 168.50 X 111.20 MM, 38.70 MM HEIGHT, METAL, CASE M02, MODULE
BEL
BM1601-7PD0AH
DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, METAL, CASE M02, MODULE
BEL
BM1601-7PD0AHF
DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, METAL, CASE M02, MODULE
BEL
BM1601-7PD0AHFU
DC-DC Regulated Power Supply Module, 1 Output, 50W, 168.50 X 111.20 MM, 38.70 MM HEIGHT, METAL, CASE M02, MODULE
BEL
©2020 ICPDF网 联系我们和版权申明