DF1-15S-2.5R24 [HRS]
2.5mm Pitch Connector for Discrete Wire Connection; 2.5mm间距连接器导线连接
| 型号： | DF1-15S-2.5R24 |
| 厂家： | 
HRS |
| 描述： | 2.5mm Pitch Connector for Discrete Wire Connection |
| 文件： | 总7页 (文件大小：239K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2.5mm Pitch Connector for Discrete Wire Connection
DF1 Series
■Features
1. Board Mounting Height (Crimping Type)
10mm 2.5mm pitch connector achieves the low profile.
2. Insulation Displacement Area Protected by Protector (ID Type)
The connector is structured to protect the insulation displacement connection area by the protector. Therefore, the connector
has a strong tensile strength against the cable and prevents dusts.
3. Easy Connection by Easy Tool (ID Type)
No expensive insulation displacement machine is needed. The connection can be established only by mating the cable into the protector
and fastening it with the ID tool
.
4. Intermediate Connection Possible (ID Type)
For intermediate connection, the connector allows signal extraction during cabling.
[Intermediate Connection]
■Applications
FA equipment, measurement equipment
B146
■Product Specifications
)
)
-30 to +85ç (
-40 to 80%
Note2
Operating Temperature Range
Operating Moisture Range
Storage Temperature Range
Storage Moisture Range
AWG 24 : 3A
AWG 26 : 2A
AWG 28 : 1A
Current rating
Cable Size
Rating
(Note1)
-10 to +60ç (
Note3
)
-40 to 70% (
Note3
Voltage rating
250V AC
Item
1. Insulation Resistance 1000M ohms Min
2. Withstanding voltage No flashover or insulation breakdown.
3. Contact Resistance 30m ohms Max
4. Insertor/Extraction Force MIN0.56N (57gf), MAX4.4N(450gf)
Specification
Condition
500V DC
650V AC/1 minute
100mA
Measure by the square steel pin with 0.635 0.002mm
5. Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
6. Moisture Resistance
Contact resistance: 30m ohms Max Insulation resistance: 1000M ohms Min 96 hours at temperature of 40ç and humidity of 90% to 95%
(-55ç: 30 minutes ■■15~35ç: 2 to 3 minutes■
Contact resistance: 30m ohms max.Insulation resistance: 1000M ohms min.
7. Temperature Cycle
(-85ç: 30 minutes ■■15~35ç: 2 to 3 minutes) 5 cycles
8. Durability (Mating/un-mating) Contact resistance: 30m ohms max.
Tin plating: 30 cycles
Flow: 250ç for 10 seconds
Manual soldering: 300ç for 3 seconds
9. Resistance to Soldering heat No deformation of components affecting performance.
Note 1. The rated current will be changed according to cable sizes for use. For the header only, the rating is 3A.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
■Material
Product
Part
Material
Polyamide
Finish
Remarks
UL94V-0
–––––
Crimping Socket
Crimping Contact
Insulator
Contact
Insulator
Contact
Insulator
Contact
Light Brown
Tin plated
Light Brown
Tin plated
Light Brown
Tin plated
Phosphor copper
Polyamide
UL94V-0
–––––
ID Socket
Phosphor copper
Polyamide
UL94V-0
–––––
Pin Header
Phosphor copper
Note:Hirose's tin-plated products takes measures against whisker.
■Ordering Information
■Connector
q Series Name
: DF1
t Contact Type
: Crimping socket
w
Number of Contact : 2 to 16, 20
C
DF1
q
- * S - 2.5 C
e Connector Type
S: Socket
R24 : AWG24 ID socket
R26 : AWG26 ID socket
R28 : AWG28 ID socket
DSA : Straight through hole
DS : Right angle through hole
w
e
r
t
P: Pin Header
r Contact Pitch
: 2.5mm
■Protector
q
Number of Contact : 2 to 16, 20
e
Cable Clamp Size
w Connector Type
1.05: UL1007 AWG26, 28
1.33: UL1007 AWG24
DF1
-
* A 1.05
A: Discrete wire
q
w
e
■Contact
q Applicable Cable Size
2428: AWG 24 to 28
w Packaging Type
SCF : Socket contact, reel
SC : Socket contact, bag
DF1
-
2428SCF
q
w
B147
ꢀID Socket (Open End Type)
ꢀApplicable Cable
Part Number
Applicable Cable
Jacket Diameter
DF1-*S-2.5R24 UL1007 AWG24(11 pieces/0.16mm) 1.35 to 1.45mm
DF1-*S-2.5R26 UL1007 AWG26( 7 pieces/0.16mm) 1.25 to 1.35mm
DF1-*S-2.5R28 UL1007 AWG28( 7 pieces/0.127mm) 1.15 to 1.25mm
(Tin plated annealing copper wire)
Note:This convex portion is located (2 contacts: the center at one point)(3 to 6
contacts: as shown in the illustration)(more than 7 contacts: one center at
one point added to the above illustration).
ꢀAWG24 Cable Socket Size (Triangle Mark: Green)
Unit: mm
B
22.5
25
27.5
30
32.5
35
Part Number
DF1-2S-2.5R24
DF1-3S-2.5R24
DF1-4S-2.5R24
DF1-5S-2.5R24
DF1-6S-2.5R24
DF1-7S-2.5R24
DF1-8S-2.5R24
DF1-9S-2.5R24
CL No.
Number of Contacts
A
B
2.5
5
Part Number
DF1-10S-2.5R24
DF1-11S-2.5R24
DF1-12S-2.5R24
DF1-13S-2.5R24
DF1-14S-2.5R24
DF1-15S-2.5R24
DF1-16S-2.5R24
DF1-20S-2.5R24
CL No.
Number of Contacts
A
28
30.5
33
35.5
38
40.5
43
541-0039-2
541-0040-1
541-0041-4
541-0042-7
541-0043-0
541-0044-2
541-0045-5
541-0046-8
2
3
4
5
6
7
8
9
8
10.5
13
15.5
18
20.5
23
541-0047-0
541-0048-3
541-0049-6
541-0050-5
541-0051-8
541-0052-0
541-0053-3
541-0057-4
10
11
12
13
14
15
16
20
7.5
10
12.5
15
17.5
20
37.5
47.5
25.5
53
ꢀAWG26 Cable Socket Size (Triangle Mark: Light Blue)
Unit: mm
B
22.5
25
27.5
30
32.5
35
Part Number
DF1-2S-2.5R26
DF1-3S-2.5R26
DF1-4S-2.5R26
DF1-5S-2.5R26
DF1-6S-2.5R26
DF1-7S-2.5R26
DF1-8S-2.5R26
DF1-9S-2.5R26
CL No.
Number of Contacts
A
B
2.5
5
Part Number
DF1-10S-2.5R26
DF1-11S-2.5R26
DF1-12S-2.5R26
DF1-13S-2.5R26
DF1-14S-2.5R26
DF1-15S-2.5R26
DF1-16S-2.5R26
DF1-20S-2.5R26
CL No.
Number of Contacts
A
28
30.5
33
35.5
38
40.5
43
541-0058-7
541-0059-0
541-0060-9
541-0061-1
541-0062-4
541-0063-7
541-0064-0
541-0065-2
2
3
4
5
6
7
8
9
8
10.5
13
15.5
18
20.5
23
541-0066-5
541-0067-8
541-0068-0
541-0069-3
541-0070-2
541-0071-5
541-0072-8
541-0076-9
10
11
12
13
14
15
16
20
7.5
10
12.5
15
17.5
20
37.5
47.5
25.5
53
ꢀAWG28 Cable Socket Size (Triangle Mark: Red)
Unit: mm
B
22.5
25
27.5
30
32.5
35
Part Number
DF1-2S-2.5R28
DF1-3S-2.5R28
DF1-4S-2.5R28
DF1-5S-2.5R28
DF1-6S-2.5R28
DF1-7S-2.5R28
DF1-8S-2.5R28
DF1-9S-2.5R28
CL No.
Number of Contacts
A
B
2.5
5
Part Number
DF1-10S-2.5R28
DF1-11S-2.5R28
DF1-12S-2.5R28
DF1-13S-2.5R28
DF1-14S-2.5R28
DF1-15S-2.5R28
DF1-16S-2.5R28
DF1-20S-2.5R28
CL No.
Number of Contacts
A
28
30.5
33
35.5
38
40.5
43
541-0115-9
541-0116-1
541-0117-4
541-0118-7
541-0119-0
541-0120-9
541-0121-1
541-0122-4
2
3
4
5
6
7
8
9
8
10.5
13
15.5
18
20.5
23
541-0123-7
541-0124-0
541-0125-2
541-0126-5
541-0127-8
541-0128-0
541-0129-3
531-0133-0
10
11
12
13
14
15
16
20
7.5
10
12.5
15
17.5
20
37.5
47.5
25.5
53
Note:A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag.
B148
■Protector
Note 1.Product contact No. mark, however 2 and 3 contacts are not indicated.
Note 2.Round hole to distinguish the protector A1.05 and 1.33 (DF1-*A1.05 only)
Select the protector after inspecting the cable jacket diameter for use.
Protector Type
DF1-*A1.33
Applicable Jacket Diameter
Ø1.35 to Ø1.45
Recommended Cable
UL1007 AWG24
DF1-*A1.05
Ø1.1 to Ø1.35
UL1007 AWG26 28
indicates contact No.
*
■AWG24 Cable Protector Size
■AWG26, 28 Cable Protector Size
Unit: mm
C
Unit: mm
Part Number
DF1- 2A1.33
DF1- 3A1.33
DF1- 4A1.33
DF1- 5A1.33
DF1- 6A1.33
DF1- 7A1.33
DF1- 8A1.33
DF1- 9A1.33
DF1-10A1.33
DF1-11A1.33
DF1-12A1.33
DF1-13A1.33
DF1-14A1.33
DF1-15A1.33
DF1-16A1.33
DF1-20A1.33
CL No.
Number of Contacts
A
10
12.5
15
B
Part Number
DF1- 2A1.05
DF1- 3A1.05
DF1- 4A1.05
DF1- 5A1.05
DF1- 6A1.05
DF1- 7A1.05
DF1- 8A1.05
DF1- 9A1.05
DF1-10A1.05
DF1-11A1.05
DF1-12A1.05
DF1-13A1.05
DF1-14A1.05
DF1-15A1.05
DF1-16A1.05
DF1-20A1.05
CL No.
Number of Contacts
A
10
12.5
15
B
2.5
5
C
541-0077-1
541-0078-4
541-0079-7
541-0080-6
541-0081-9
541-0082-1
541-0083-4
541-0084-7
541-0085-0
541-0086-2
541-0087-5
541-0088-8
541-0089-0
541-0090-0
541-0091-2
541-0095-3
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
20
2.5
5
7.5
1.1
1.1
1.1
1.1
541-0096-6
541-0097-9
541-0098-1
541-0099-4
541-0100-1
541-0101-4
541-0102-7
541-0103-0
541-0104-2
541-0105-5
541-0106-8
541-0107-0
541-0108-3
541-0109-6
541-0110-5
541-0114-6
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
20
0.7
0.7
0.7
0.7
7.5
17.5 10
17.5 10
20 12.5 1.1
22.5 15 1.1
25 17.5 1.1
27.5 20 1.1
30 22.5 1.1
32.5 25 1.1
35 27.5 1.1
37.5 30 1.1
40 32.5 1.1
42.5 35 1.1
20 12.5 0.7
22.5 15 0.7
25 17.5 0.7
27.5 20 0.7
30 22.5 0.7
32.5 25 0.7
35 27.5 0.7
37.5 30 0.7
40 32.5 0.7
42.5 35 0.7
45 37.5 1.1
55 47.5 1.1
45 37.5 0.7
55 47.5 0.7
Note:A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
B149
■Crimping Socket
Photo: Contact Inserted.
N
the illustration)(more than 7 contacts: one center at one point added to the above illustration).
Note 2.The terminal number indicates all contact numbers.
Unit: mm
Part Number
DF1- 2S-2.5C
DF1- 3S-2.5C
DF1- 4S-2.5C
DF1- 5S-2.5C
DF1- 6S-2.5C
DF1- 7S-2.5C
DF1- 8S-2.5C
DF1- 9S-2.5C
DF1-10S-2.5C
CL No.
Number of Contacts
A
8
10.5
13
15.5
18
20.5
23
B
2.5
5
7.5
10
12.5
15
17.5
20
Part Number
DF1-11S-2.5C
DF1-12S-2.5C
DF1-13S-2.5C
DF1-14S-2.5C
DF1-15S-2.5C
DF1-16S-2.5C
DF1-18S-2.5C
DF1-20S-2.5C
CL No.
Number of Contacts
A
30.5
33
33.5
38
40.5
43
48
B
25
27.5
30
32.5
35
37.5
42.5
47.5
541-0136-9
541-0137-1
541-0138-4
541-0139-7
541-0140-6
541-0141-9
541-0142-1
541-0143-4
541-0144-7
2
3
4
5
6
7
8
9
10
541-0145-0
541-0146-2
541-0147-5
541-0148-8
541-0149-0
541-0150-0
541-0152-5
541-0154-0
11
12
13
14
15
16
18
20
25.5
28
53
22.5
Note:A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
■Crimping Contact for Socket
Part Number
DF1-2428SCF
DF1-2428SC
CL No.
541-0134-3
541-0135-6
Packaging Type
Reel
Number of Contacts
Finish
Tin plating
10000
100
Bag
1.85
2.5
1.9
■Applicable Cable (Tin Plated Annealing Copper Wire)
Conductor Size (wire construction)
AWG24 (11 cores/0.16mm)
AWG26 ( 7 cores/0.16mm)
AWG28 (07 cores/1.24mm)
Jacket Diameter
Ø0.9 to Ø1.5mm
Note:If other cables are used instead of the applicable cable, contact Hirose sales
department.
■Recommended Cable
UL1061, UL1007
Ø 1.5
■Strip Length
1.6 to 2.1mm
6.5
BApplicable Crimping Tool
Type
Applicator
Press Main Unit
Manual Crimping Tool DF1-T2428S
Extraction Tool DF1-C-PO
Part Number
AP105-DF1-2428S
CM-105
CL No.
Applicable Contact
DF1-2428SCF
---------------
DF1-2428SC
901-4538-8
901-0005-4
550-0102-8
550-0177-7
DF1-2428SCF
Note:If a trouble has occurred due to tools which are not designated by Hirose, Hirose
won't guarantee any product.
B150
■Pin Header Right Angle Type
■Board Through-hole Diameter : 1.1+
0.1
+
0
ø
Unit: mm
Part Number
DF1- 2P-2.5DS
DF1- 3P-2.5DS
DF1- 4P-2.5DS
DF1- 5P-2.5DS
DF1- 6P-2.5DS
DF1- 7P-2.5DS
DF1- 8P-2.5DS
DF1- 9P-2.5DS
DF1-10P-2.5DS
CL No.
Number of Contacts
A
7.5
10
12.5
15
B
C
2.5
5
7.5
10
Part Number
DF1-11P-2.5DS
DF1-12P-2.5DS
DF1-13P-2.5DS
DF1-14P-2.5DS
DF1-15P-2.5DS
DF1-16P-2.5DS
DF1-18P-2.5DS
DF1-20P-2.5DS
CL No.
541-0029-9
541-0030-8
541-0031-0
541-0032-3
541-0033-6
541-0034-9
541-0036-4
541-0038-0
Number of Contacts
A
30
B
26.3
C
25
541-0020-4
541-0021-7
541-0022-0
541-0023-2
541-0024-5
541-0025-8
541-0026-0
541-0027-3
541-0028-6
2
3
4
5
6
7
8
9
10
3.8
6.3
8.8
11.3
11
12
13
14
15
16
18
20
32.5 28.8 27.5
35 31.3 30
37.5 33.8 32.5
40 36.3 35
42.5 38.8 37.5
47.5 43.8 42.5
52.5 48.8 47.5
17.5 13.8 12.5
20 16.3 15
22.5 18.8 17.5
25 21.3 20
27.5 23.8 22.5
Note 1.A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
Note 2.The socket applicable to the 18 contact connector is only crimping type.
■Pin Header Straight Type
■Board Through-hole Diameter : 1.1+
0.1
+
0
ø
Unit: mm
Part Number
DF1- 2P-2.5DSA
DF1- 3P-2.5DSA
DF1- 4P-2.5DSA
DF1- 5P-2.5DSA
DF1- 6P-2.5DSA
DF1- 7P-2.5DSA
DF1- 8P-2.5DSA
DF1- 9P-2.5DSA
DF1-10P-2.5DSA
CL No.
Number of Contacts
A
7.5
10
12.5
15
B
C
2.5
5
7.5
10
Part Number
DF1-11P-2.5DSA
DF1-12P-2.5DSA
DF1-13P-2.5DSA
DF1-14P-2.5DSA
DF1-15P-2.5DSA
DF1-16P-2.5DSA
DF1-18P-2.5DSA
DF1-20P-2.5DSA
CL No.
Number of Contacts
A
30
B
26.3
C
25
541-0001-0
541-0002-2
541-0003-5
541-0004-8
541-0005-0
541-0006-3
541-0007-6
541-0008-9
541-0009-1
2
3
4
5
6
7
8
9
10
3.8
6.3
8.8
11.3
541-0010-0
541-0011-3
541-0012-6
541-0013-9
541-0014-1
541-0015-4
541-0017-0
541-0019-5
11
12
13
14
15
16
18
20
32.5 28.8 27.5
35 31.3 30
37.5 33.8 32.5
40 36.3 35
42.5 38.8 37.5
47.5 43.8 42.5
52.5 48.8 47.5
17.5 13.8 12.5
20 16.3 15
22.5 18.8 17.5
25 21.3 20
27.5 23.8 22.5
Note 1.A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag.
Note 2.The socket applicable to the 18 contacts connector is only crimping type.
B151
BDF1 Connection Press
Part Number
CL No.
Height Width Depth Weight
DF1 Connection Press HP513 550-0134-4 200mm 260mm 250mm 3.7kg
Note:The intermediate connection can be established by removing the
cable cuttingblade of this press machine.
Note:Select a protector after inspecting a cable Jacket diameter for use.
Protector Type
DF1-*A1.33
Applicable Jacket Diameter Recommended Cable
DF1 Connection Press HP513
Ø1.35 to Ø1.45
Ø1.1 to Ø1.35
UL1007 AWG24
DF1-*A1.05
UL1007 AWG26, 28
indicates contact No.
*
BDF1 Cable Crimper
Part Number
CL No.
DF1 Cable Crimper
550-0130-3
DF1 Cable Crimper
Used to install the cable in the protector.
BPrecautions
1. Recommended Soldering Condition Flow: 250ç for 3 seconds
Manual soldering: 290ç for 2 seconds
Refer to Nylon Connector Use Hand book.
2. Cleaning Condition
3. Connection Condition
[Crimping]
Refer to Nylon Connector Use Hand book.
[ID]
■For the insulation displacement tool, set a set of connector per insulation displacement. If more
than 2 connectors have been set, they interrupt each other, which will cause an insulation
displacement failure.
■After the insulation displacement, make sure that the locks on both protector sides are
completely activated.
B152
相关型号：
DF1-15S-2.5R26(05)
Board Connector, 15 Contact(s), 1 Row(s), Female, IDC Terminal, Socket, ROHS COMPLIANT
HRS
DF1-16P-2.5DSA
Board Connector, 16 Contact(s), 1 Row(s), Male, Straight, 0.098 inch Pitch, Solder Terminal, Brown Insulator, Receptacle
HRS
DF1-16S-2.5R26(05)
Board Connector, 16 Contact(s), 1 Row(s), Female, IDC Terminal, Socket, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明