DF13-6S-1.25C(41)

更新时间:2024-10-30 02:16:05
品牌:HRS
描述:Board Connector, 6 Contact(s), 1 Row(s), Female, Crimp Terminal, Socket

DF13-6S-1.25C(41) 概述

Board Connector, 6 Contact(s), 1 Row(s), Female, Crimp Terminal, Socket

DF13-6S-1.25C(41) 数据手册

通过下载DF13-6S-1.25C(41)数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
NC Nylon Connectors  
DF13 Series (1.25mm Pitch)  
DF13 SERIES  
1.25 mm Pitch Compact Crimp Connectors  
Low profile with package height  
Type  
System  
Height (h)  
DIP  
5.3mm  
SMT  
DIP  
5.8mm  
3.6mm  
SMT  
Features  
Designed for automatic packaging  
Suction plane provided for suction type automatic packaging  
machine  
1. Compact  
Low profile with package height of 5.8 mm (SMT straight type).  
DIP straight type: 5.3 mm, DIP right-angle type: 3.6 mm. For  
details, see "APPLICATION" on page 52.  
Straight type  
Suction plane  
2. Multi-pin  
Double-row type available with up to 40 pins, 30% higher  
packaging density than single-row type.  
3. Compatible with automatic packaging  
Vacuum-operated header allows automatic embossed packaging.  
See Fig. 1.  
Can be packed in magazines for delivery.  
Reinforcement  
4. Enhanced functions packed into compact unit  
Angle type  
Suction plane  
Box construction prevents prying-out, completely preventing mis-  
insertion.  
In addition, the SMT-compatible headers are reinforced to prevent  
separation of the solder connection.  
See Fig. 1.  
Application  
Notebook computers, portable information terminals, compact  
OA equipment, and various consumer equipment such as video movies.  
Fig. 1  
44  
NC Nylon Connectors  
DF13 Series (1.25mm Pitch)  
Product standard  
Rated current  
Rating  
1 A  
Operating temp.  
-35~85˚C(Note 1)  
40~80%  
Storage temp.  
Storage humidity  
-10~60˚C (Note 2)  
40~70% (Note 2)  
Rated voltage AC 150 V Operating humidity  
Item  
Standard  
500 Mor more  
Conditions  
1. Insulation resistance  
2. Withstand voltage  
3. Contact resistance  
Measured at 100 VDC  
AC500V 1 minute  
Measured at 100 mA  
No flashover or dielectric breakdown allowed  
30 mor less  
4. Insertion and withdrawals force MIN 0.3 N(30gf), MAX 3 N(300gf)  
To be measured with a steel pin of M0.35±0.002mm  
5. Vibration resistance  
6. Moisture resistance  
7.Temperature cycle  
No electrical discontinuity of 1 µs or more allowed  
Frequency: 10 - 55 Hz, single-side amplitude: 0.75 mm, 3 directions for 2 hours  
Contact resistance: 30 mor less, insulation resistance: 500 Mor more Temperature: 40±2°C, humidity: 90 - 95%, allow 96 hours before measurement .  
Contact resistance: 30 mor less, insulation resistance: 500 Mor more (-55°C for 30 min. / 5 - 35°C for 10 min. / 85°C for 30 min. / 5 - 35°C for 10 min.) 5 cycles  
8. Insertion/extraction life  
9. Solder heat resistance  
Contact resistance: 30 mor less  
Solder-plated: 30 insertions/extractions  
:
Gold-plated 50 insertions/extractions  
No melting of resin affecting the connector performance allowed  
Dip type  
Flow: 250°C for 10 min.  
Manual soldering: solder temperature:  
300°C for 3 seconds  
SMT type  
Reflow: At recommended Manual soldering: solder temperature:  
temperature profile  
300°C for 3 seconds  
Note 1:  
Note 2:  
Includes temperature rise when power is on.  
"Storage" refers to a long period of storage without use of the product before being mounted on a board.  
The operating temperature and humidity ranges apply to the connectors mounted on a board when turned off, and connectors under  
temporary storage such as those being transported.  
Note 3:  
The above standards are typical for the DF13 series. The formal standards are stated in the delivery specifications.  
Material  
Product  
Crimp socket  
Crimp socket terminal Terminal  
Pin header  
Part  
Insulation  
Material  
Polyamide resin  
Phosphor bronze  
Polyamide resin  
Brass  
Polyamide resin  
Brass  
Phosphor bronze  
Polyamide resin  
Brass  
Processing  
UL Rating  
UL94V-0  
Beige  
Solder-plated or Gold-plated  
Beige  
Solder-plated  
Insulation  
Terminal  
Insulation  
Terminal  
Fittings  
Insulation  
Terminal  
Fittings  
UL94V-0  
UL94V-0  
(Dip)  
Beige  
Pin header  
(SMTsingle-row)  
Solder-plated or Gold-plated  
Solder-plated  
Beige  
UL94V-0  
Pin header  
(SMTdouble-row)  
Solder-plated or Gold-plated  
Solder-plated  
Phosphor bronze  
Note: Our tin plating is protected from whiskers.  
Structure of the product number  
The product specifications can be determined from the product number.  
When ordering, select products using the product numbers listed in this catalog 46 to 52 pages.  
Connector  
DF13#  
- S -1.25C  
➁ ➂ ➃ ➄  
Series Name : DF  
Series No. : 13  
Shape symbol  
No. of contacts: Single row: : 2~12, 14, 15  
Double-row: : 10, 20, 30, 40  
Types of connectors  
Contact pitch: 1.25 mm  
Connection form/Type of termination  
C: Crimp case  
Blank: With guide post  
S: Single-row socket  
DSA: Straight DIP  
A: Without guide post  
P: Single-row pin header  
DS: Double-row socket  
DS: Right-angle DIP  
V: Straight SMT  
For V type only  
B: With guide post,embossed type packing  
C: Without guide post, embossed type  
packing  
DP: Double-row pin header  
H: Right-angle SMT  
Terminal  
DF13 - 2630SCFA  
Applicable wire size  
2630 : AWG26~30  
Type of plating  
Blank: Tin-plated  
A: Gold-plated  
Type of form/Type of packaging  
SCF : Socket contact reel  
45  
NC Nylon Connectors  
DF13 Series (1.25mm Pitch)  
Single-row socket  
[Specification No.]: -**,(**)  
Blank : 100 pcs. per pack  
(40) : 500 pcs. per package  
(41) : 1000 pcs. per package  
Photo shows engaged pins  
Unit : mm  
No. of  
No. of  
Product No.  
HRS No.  
536-0001-4-  
536-0002-7-  
536-0003-0-  
536-0004-2-  
536-0005-5-  
536-0006-8-  
536-0007-0-  
Product No.  
A
B
HRS No.  
536-0008-3-  
536-0009-6-  
536-0010-5-  
536-0011-8-  
536-0013-3-  
536-0014-6-  
A
B
contacts  
contacts  
DF13-2S-1.25C (  
DF13-3S-1.25C (  
DF13-4S-1.25C (  
DF13-5S-1.25C (  
DF13-6S-1.25C (  
DF13-7S-1.25C (  
DF13-8S-1.25C (  
)
2
3
4
5
6
7
8
1.25 4.15  
2.50 5.40  
3.75 6.65  
5.00 7.90  
6.25 9.15  
7.50 10.40  
8.75 11.65  
DF13- 9S-1.25C (  
DF13-10S-1.25C (  
DF13-11S-1.25C (  
DF13-12S-1.25C (  
DF13-14S-1.25C (  
DF13-15S-1.25C (  
)
9
10.00 12.90  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
)
✻✻  
)
✻✻  
10 11.25 14.15  
11 12.50 15.40  
12 13.75 16.65  
14 16.25 19.15  
15 17.50 20.40  
)
✻✻  
)
✻✻  
)
✻✻  
)
✻✻  
)
✻✻  
)
✻✻  
)
✻✻  
)
✻✻  
)
✻✻  
Note 1: Minimum order quantity of the models without a number specified is one pack containing 100 sockets.  
Note 2: Models available in (40): 500 pieces per package and (41): 1000 pieces per pack should be ordered in quantity of sockets. Order in multiples  
of order units, e.g., 500, 1000, 1500,-- .  
Double-row socket  
Photo shows engaged pins  
Unit : mm  
No. of  
contacts  
HRS No.  
536-0550-2-  
536-0555-6-  
536-0560-6-  
536-0565-0-  
Product No.  
A
B
[Specification No.]: -**,(**)  
Blank : 100 pcs. per pack  
(40) : 500 pcs. per package  
(41) : 1000 pcs. per package  
DF13-10DS-1.25C () 10 10.40 5.00  
DF13-20DS-1.25C () 20 16.65 11.25  
DF13-30DS-1.25C () 30 22.90 17.50  
DF13-40DS-1.25C () 40 29.15 23.75  
✻✻  
✻✻  
✻✻  
✻✻  
Note 1: Minimum order quantity of the models without a number specified is one pack containing 100 sockets.  
Note 2: Models available in (40): 500 pieces per package and (41): 1000 pieces per pack should be ordered in quantity of sockets. Order in multiples  
of order units, e.g., 500, 1000, 1500,-- .  
46  
NC Nylon Connectors  
DF13 Series (1.25mm Pitch)  
Single-row Straight Pin Header (DIP)  
[Specification No.]: -**,(**)  
Blank : Tin-plated  
Board through-hole diameter : ø0.6±0.03  
Unit : mm  
No. of  
No. of  
HRS No.  
536-0101-9-  
536-0102-1-  
536-0103-4-  
536-0104-7-  
536-0105-0-  
536-0106-2-  
536-0107-5-  
Product No.  
A
B
HRS No.  
Product No.  
DF13- 9P-1.25DSA ()  
A
B
contacts  
contacts  
DF13-2P-1.25DSA ()  
DF13-3P-1.25DSA ()  
DF13-4P-1.25DSA ()  
DF13-5P-1.25DSA ()  
DF13-6P-1.25DSA ()  
DF13-7P-1.25DSA ()  
DF13-8P-1.25DSA ()  
2
1.25 4.15 536-0108-8-  
2.50 5.40 536-0109-0-  
3.75 6.65 536-0110-0-  
5.00 7.90 536-0111-2-  
6.25 9.15 536-0113-8-  
7.50 10.40 536-0114-0-  
8.75 11.65  
9
10.00 12.90  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
3
4
5
6
7
8
DF13-10P-1.25DSA () 10 11.25 14.15  
DF13-11P-1.25DSA () 11 12.50 15.40  
DF13-12P-1.25DSA () 12 13.75 16.65  
DF13-14P-1.25DSA () 14 16.25 19.15  
DF13-15P-1.25DSA () 15 17.50 20.40  
Note : Minimum order quantity of the models without a number specified is one pack containing 100 sockets.  
Single-row Right-angle Pin Header (DIP)  
[Specification No.]: -**,(**)  
(20):Tin-plated, magazine packaging  
Magazine dimension  
Board through-hole diameter : ø0.6±0.03  
Unit : mm  
No. of products  
in a magazine  
No. of products  
No. of  
No. of  
contacts  
HRS No.  
Product No.  
A
B
HRS No.  
Product No.  
A
B
contacts  
in a magazine  
536-0151-7-  
536-0152-0-  
536-0153-2-  
536-0154-5-  
536-0155-8-  
536-0156-0-  
536-0157-3-  
DF13-2P-1.25DS ()  
DF13-3P-1.25DS ()  
DF13-4P-1.25DS ()  
DF13-5P-1.25DS ()  
DF13-6P-1.25DS ()  
DF13-7P-1.25DS ()  
DF13-8P-1.25DS ()  
2
3
4
5
6
7
8
1.25 4.15 115  
2.50 5.40 89  
3.75 6.65 72  
5.00 7.90 61  
6.25 9.15 52  
7.50 10.40 46  
8.75 11.65 41  
536-0158-6-  
536-0159-9-  
536-0160-8-  
536-0161-0-  
536-0163-6-  
536-0164-9-  
DF13- 9P-1.25DS ()  
9 10.00 12.90 37  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
DF13-10P-1.25DS () 10 11.25 14.15 34  
DF13-11P-1.25DS () 11 12.50 15.40 31  
DF13-12P-1.25DS () 12 13.75 16.65 29  
DF13-14P-1.25DS () 14 16.25 19.15 25  
DF13-15P-1.25DS () 15 17.50 20.40 23  
Note: Order magazine-packaged products in multiples of the amount contained in a magazine.  
47  
NC Nylon Connectors  
DF13 Series (1.25mm Pitch)  
Single-row Straight Pin Header (SMT)  
[Specification No.]: -**,(**)  
(20) : Tin-plated, magazine packaging  
(50) : Gold-plated, magazine packaging  
Having a box type housing, the pin headers of this model have no embossed suction surface  
and are not available in the embossed packaging specification.  
Unit : mm  
No. of products  
No. of  
HRS No.  
Product No.  
A
B
C
D
E
F
Remarks  
contacts  
in a magazine  
67  
57  
49  
44  
39  
36  
33  
30  
28  
26  
24  
21  
536-0201-3-  
536-0202-6-  
536-0203-9-  
536-0204-1-  
536-0205-4-  
536-0206-7-  
536-0207-0-  
536-0208-2-  
536-0209-5-  
536-0210-4-  
536-0211-7-  
536-0213-2-  
536-0214-5-  
DF13- 2P-1.25V ()  
DF13- 3P-1.25V ()  
DF13- 4P-1.25V ()  
DF13- 5P-1.25V ()  
DF13- 6P-1.25V ()  
DF13- 7P-1.25V ()  
DF13- 8P-1.25V ()  
DF13- 9P-1.25V ()  
2
3
4
5
6
7
8
9
1.25  
2.50  
3.75  
5.00  
6.25  
4.15  
5.40  
6.65  
7.90  
9.15  
10.40  
11.65  
12.90  
14.15  
15.40  
16.65  
19.15  
20.40  
7.15  
8.40  
9.65  
3.35  
4.60  
5.85  
7.10  
8.35  
5.65  
6.90  
8.15  
1.95  
3.20  
4.45  
5.70  
6.95  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
10.90  
12.15  
13.40  
14.65  
15.90  
17.15  
18.40  
19.65  
22.15  
23.40  
9.40  
10.65  
11.90  
13.15  
14.40  
15.65  
16.90  
18.15  
20.65  
21.90  
Guide post:  
Provided  
7.50  
8.75  
9.60  
8.20  
9.45  
10.85  
12.10  
13.35  
14.60  
15.85  
18.35  
19.60  
10.00  
11.25  
12.50  
13.75  
16.25  
17.50  
10.70  
11.95  
13.20  
14.45  
16.95  
18.20  
DF13-10P-1.25V () 10  
DF13-11P-1.25V () 11  
DF13-12P-1.25V () 12  
DF13-14P-1.25V () 14  
DF13-15P-1.25V () 15  
20  
Note: Order magazine-packaged products in multiples of the amount contained in a magazine.  
Recommended board pattern  
Magazine dimensional drawing  
Note: When a part marked with  
has a pattern and no resist on it, take care to prevent the connector terminal from contacting it.  
48  
NC Nylon Connectors  
DF13 Series (1.25mm Pitch)  
Single-row Straight Header (SMT)  
(Three-wall type compatible with emboss suction)  
Recommended board pattern  
Note 1: The hole is not required for products  
without the guide.  
Note 2: When a part marked with  
has a  
pattern and no resist on it, take care to  
prevent the connector terminal from  
contacting it.  
[Specification No.]: -**,(**)  
(20) : Tin-plated, magazine packaging  
(21) : Tin-plated, embossed packaging  
(50) : Gold-plated, magazine packaging  
(51) : Gold-plated, embossed packaging  
The pin headers of this model are three-wall type and have an embossed suction surface,  
and are thus compatible with suction-operated automatic packaging.  
Unit : mm  
No. of products Emboss  
No. of  
contacts  
HRS No.  
Product No.  
A
B
C
D
E
F
G
Remarks  
in a magazine  
Width  
16  
16  
24  
24  
24  
24  
24  
24  
24  
32  
32  
32  
44  
536-0051-2-  
536-0052-5-  
536-0053-8-  
536-0054-0-  
536-0055-3-  
536-0056-6-  
536-0057-9-  
536-0058-1-  
536-0059-4-  
536-0060-3-  
536-0061-6-  
536-0063-1-  
536-0064-4-  
DF13B- 2P-1.25V ()  
DF13B- 3P-1.25V ()  
DF13B- 4P-1.25V ()  
DF13B- 5P-1.25V ()  
DF13B- 6P-1.25V ()  
DF13B- 7P-1.25V ()  
DF13B- 8P-1.25V ()  
DF13B- 9P-1.25V ()  
DF13B-10P-1.25V () 10 11.25 14.15 17.15 13.35 15.65 11.95 10.60 28  
DF13B-11P-1.25V () 11 12.50 15.40 18.40 14.60 16.90 13.20 11.85 26  
DF13B-12P-1.25V () 12 13.75 16.65 19.65 15.85 18.15 14.45 13.10 24  
DF13B-14P-1.25V () 14 16.25 19.15 22.15 18.35 20.65 16.95 15.60 21  
DF13B-15P-1.25V () 15 17.50 20.40 23.40 19.60 21.90 18.20 16.85 20  
2
3
4
5
6
7
8
9
1.25 4.15 7.15 3.35 5.65 1.95 2.20 67  
2.50 5.40 8.40 4.60 6.90 3.20 3.45 57  
3.75 6.65 9.65 5.85 8.15 4.45 3.10 49  
5.00 7.90 10.90 7.10 9.40 5.70 4.35 44  
6.25 9.15 12.15 8.35 10.65 6.95 5.60 39  
7.50 10.40 13.40 9.60 11.90 8.20 6.85 36  
8.75 11.65 14.65 10.85 13.15 9.45 8.10 33  
10.00 12.90 15.90 12.10 14.40 10.70 9.35 30  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
Guide post:  
Provided  
536-0401-2-  
536-0402-5-  
536-0403-8-  
536-0404-0-  
536-0405-3-  
536-0406-6-  
536-0407-9-  
536-0408-1-  
536-0409-4-  
536-0410-3-  
536-0411-6-  
536-0413-1-  
536-0414-4-  
DF13C- 2P-1.25V ()  
DF13C- 3P-1.25V ()  
DF13C- 4P-1.25V ()  
DF13C- 5P-1.25V ()  
DF13C- 6P-1.25V ()  
DF13C- 7P-1.25V ()  
DF13C- 8P-1.25V ()  
DF13C- 9P-1.25V ()  
DF13C-10P-1.25V () 10 11.25 14.15 17.15  
DF13C-11P-1.25V () 11 12.50 15.40 18.40  
DF13C-12P-1.25V () 12 13.75 16.65 19.65  
DF13C-14P-1.25V () 14 16.25 19.15 22.15  
DF13C-15P-1.25V () 15 17.50 20.40 23.40  
2
3
4
5
6
7
8
9
1.25 4.15 7.15  
2.50 5.40 8.40  
3.75 6.65 9.65  
5.00 7.90 10.90  
6.25 9.15 12.15  
7.50 10.40 13.40  
8.75 11.65 14.65  
10.00 12.90 15.90  
.
.
.
.
.
.
.
.
.
.
.
.
.
5.65 1.95 2.20 67  
6.90 3.20 3.45 57  
8.15 4.45 3.10 49  
9.40 5.70 4.35 44  
10.65 6.95 5.60 39  
11.90 8.20 6.85 36  
13.15 9.45 8.10 33  
14.40 10.70 9.35 30  
15.65 11.95 10.60 28  
16.90 13.20 11.85 26  
18.15 14.45 13.10 24  
20.65 16.95 15.60 21  
21.90 18.20 16.85 20  
16  
16  
24  
24  
24  
24  
24  
24  
24  
32  
32  
32  
44  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
Guide post:  
Not Provided  
Note 1: Order magazine packaged products in multiples of the number in one magazine.  
Note 2: Order embossed packaged product in reels (1,000 pcs. per reel).  
49  
NC Nylon Connectors  
DF13 Series (1.25mm Pitch)  
Single-row Right-angle Pin Header (SMT)  
(Four-wall type compatible with emboss suction)  
Recommended board pattern  
Magazine dimensional  
drawing  
[Specification No.]: -**,(**)  
(20) : Tin-plated,magazine packaging  
(21) : Tin-plated, embossed packaging  
(50) : Gold-plated, magazine packaging  
(51) : Gold-plated, embossed packaging  
Unit : mm  
No. of products Emboss  
No. of  
contacts  
HRS No.  
Product No.  
A
B
C
D
E
Remarks  
in a magazine  
Width  
16  
16  
24  
24  
24  
24  
24  
24  
24  
32  
32  
32  
44  
536-0251-1-  
536-0252-4-  
536-0253-7-  
536-0254-0-  
536-0255-2-  
536-0256-5-  
536-0257-8-  
536-0258-0-  
536-0259-3-  
536-0260-2-  
536-0261-5-  
536-0263-0-  
536-0264-3-  
DF13 - 2P-1.25H ()  
DF13 - 3P-1.25H ()  
DF13 - 4P-1.25H ()  
DF13 - 5P-1.25H ()  
DF13 - 6P-1.25H ()  
DF13 - 7P-1.25H ()  
DF13 - 8P-1.25H ()  
DF13 - 9P-1.25H ()  
DF13 -10P-1.25H () 10 11.25 14.15 17.15 13.35 15.65 28  
DF13 -11P-1.25H () 11 12.50 15.40 18.40 14.60 16.90 26  
DF13 -12P-1.25H () 12 13.75 16.65 19.65 15.85 18.15 24  
DF13 -14P-1.25H () 14 16.25 19.15 22.15 18.35 20.65 21  
DF13 -15P-1.25H () 15 17.50 20.40 23.40 19.60 21.90 20  
2
3
4
5
6
7
8
9
1.25 4.15 7.15 3.35 5.65 67  
2.50 5.40 8.40 4.60 6.90 57  
3.75 6.65 9.65 5.85 8.15 49  
5.00 7.90 10.90 7.10 9.40 44  
6.25 9.15 12.15 8.35 10.65 39  
7.50 10.40 13.40 9.60 11.90 36  
8.75 11.65 14.65 10.85 13.15 33  
10.00 12.90 15.90 12.10 14.40 30  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
Guide post:  
Provided  
536-0301-8-  
536-0302-0-  
536-0303-3-  
536-0304-6-  
536-0305-9-  
536-0306-1-  
536-0307-4-  
536-0308-7-  
536-0309-0-  
536-0310-9-  
536-0311-1-  
536-0313-7-  
536-0314-0-  
DF13A- 2P-1.25H ()  
DF13A- 3P-1.25H ()  
DF13A- 4P-1.25H ()  
DF13A- 5P-1.25H ()  
DF13A- 6P-1.25H ()  
DF13A- 7P-1.25H ()  
DF13A- 8P-1.25H ()  
DF13A- 9P-1.25H ()  
DF13A-10P-1.25H () 10 11.25 14.15 17.15  
DF13A-11P-1.25H () 11 12.50 15.40 18.40  
DF13A-12P-1.25H () 12 13.75 16.65 19.65  
DF13A-14P-1.25H () 14 16.25 19.15 22.15  
DF13A-15P-1.25H () 15 17.50 20.40 23.40  
2
3
4
5
6
7
8
9
1.25 4.15 7.15  
2.50 5.40 8.40  
3.75 6.65 9.65  
5.00 7.90 10.90  
6.25 9.15 12.15  
7.50 10.40 13.40  
8.75 11.65 14.65  
10.00 12.90 15.90  
.
.
.
.
.
.
.
.
.
.
.
.
.
5.65 67  
6.90 57  
8.15 49  
9.40 44  
10.65 39  
11.90 36  
13.15 33  
14.40 30  
15.65 28  
16.90 26  
18.15 24  
20.65 21  
21.90 20  
16  
16  
24  
24  
24  
24  
24  
24  
24  
32  
32  
32  
44  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
Guide post:  
Not Provided  
Note 1: Order magazine packaged products in multiples of the number in one magazine.  
Note 2: Order embossed packaged product in reels (1,000 pcs. per reel).  
50  
NC Nylon Connectors  
DF13 Series (1.25mm Pitch)  
Double-row Right-angle Pin Header (SMT)  
(Four-wall type compatible with emboss suction)  
Recommended board pattern  
Magazine dimensional drawing  
Note 1: When a part marked with  
has a pattern and no resist on it,  
take care to prevent the  
connector terminal from  
contacting it.  
Note 2: The hole is not required  
for products without  
the guide.  
[Specification No.]: -**,(**)  
(20) : Tin-plated, magazine packaging  
(29) : Tin-plated, embossed packaging  
(50) : Gold-plated, magazine packaging  
(59) : Gold-plated, embossed packaging  
Unit : mm  
Remarks  
Spec. Spec. Spec. Spec.No. of products Emboss  
No. of  
HRS No.  
Product No.  
A
B
C
D
contacts  
(20) (29) (50) (59) in a magazine  
Width  
24  
536-0510-8-  
536-0515-1-  
536-0520-1-  
536-0525-5-  
536-0600-9-  
536-0605-2-  
536-0610-2-  
536-0615-6-  
DF13 -10DP-1.25V () 10 12.10 5.00 8.70 7.50  
DF13 -20DP-1.25V () 20 18.35 11.25 14.95 13.75  
DF13 -30DP-1.25V () 30 24.60 17.50 21.20 20.00  
DF13 -40DP-1.25V () 40 30.85 23.75 27.45 26.25  
K
K
.
.
K
K
.
.
K
K
.
.
K
K
.
.
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
K
40  
26  
19  
15  
40  
26  
19  
15  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
✻✻  
32  
Guide post:  
Provided  
44  
44  
DF13A-10DP-1.25V () 10 12.10 5.00 8.70  
DF13A-20DP-1.25V () 20 18.35 11.25 14.95  
DF13A-30DP-1.25V () 30 24.60 17.50 21.20  
DF13A-40DP-1.25V () 40 30.85 23.75 27.45  
.
.
.
.
24  
Guide post:  
Not Provided  
32  
44  
44  
Note 1: Order magazine packaged products in multiples of the number in one magazine.  
Note 2: Order embossed packaged product in reels (1,000 pcs. per reel).  
Note 3: Embossed tape packaged products will be provided with suction area.  
51  
NC Nylon Connectors  
DF13 Series (1.25mm Pitch)  
Crimp terminal  
HRS No.  
536-0300-5  
536-0298-5  
Product No.  
Type  
Quantity  
Processing  
DF13-2630SCF  
Reel terminal 10,000 units per reel Tin-plated  
DF13-2630SCFA Reel terminal 10,000 units per reel Gold-plated  
Applicable wire (Tin-plated annealed copper wire)  
Recommended wire  
UL1571  
Conductor size (core construction) Coating diameter  
AWG26 (7 cores/0.16 mm)  
Strip length  
1.2~1.9mm  
AWG28 (7 cores/0.127 mm) ø0.65~ø1.0mm  
AWG30 (7 cores/0.1 mm)  
Note: Contact our sales department for unspecified wires.  
Applicable crimping tool  
Type  
Applicator  
Press body  
HRS No.  
901-4531-9  
901-0005-4  
Product No.  
AP105-DF13-2630S  
CM-105  
Applicable contact  
DF13-2630SCF/SCFA  
...........  
DF13-2630SCF  
Manual crimping tool 550-0256-1  
Extraction tool 550-0179-2  
DF13-TB2630HC  
DF-C-PO (B)  
DF13-2630SCF  
Note 1: Any problem caused by using a tool not approved by HIROSE is out of warranty.  
Note 2: The manual crimping tool consecutively cuts carrier-fitted reel terminals.  
Application drawing  
SMT (single row)  
DIP (single row)  
SMT (double rows)  
SMT type right-angle model  
(double-row) is not available.  
52  
NC Nylon Connectors  
DF13 Series (1.25mm Pitch)  
Embossed tape carrier dimensional drawing (complies with JIS-C-0806)  
DF1 3 B-P-1 .2 5 V (Guide pos t: Provided)  
DF1 3 C-P-1 .2 5 V (Guide pos t: Not Provided)  
DF1 3 -P-1 .2 5 H (Guide pos t: Provided)  
DF1 3 A-P-1 .2 5 H (Guide pos t: Not Provided)  
Unit : mm  
Product type  
Dimension  
No. of contact  
2, 3  
A
B
C
D
DF13B- P-1.25V  
16  
24  
32  
44  
.......  
.......  
28.4  
7.5  
16.4  
24.4  
32.4  
44.4  
DF13C- P-1.25V  
4~10  
11.5  
14.2  
20.2  
DF13 - P-1.25H  
11~14  
15  
DF13A- P-1.25H  
40.4  
Note: 13-pin models are not available in series.  
53  
NC Nylon Connectors  
DF13 Series (1.25mm Pitch)  
Notes on use  
1. Recommended temperature  
profile (SMT)  
Note 1: You can solder a product up to two times under the same conditions, provided that  
the product is allowed to cool back to room temperature before the second soldering.  
Note 2: The above temperature refers to the board surface temperature of the connector lead.  
2. Recommended soldering  
conditions (SMT)  
Soldering iron temperature: 290±10˚C, soldering time: less than 3 seconds  
3. Recommended screen  
thickness (SMT)  
0.15mm~0.2mm  
4. Warp in board (SMT)  
5. Recommended soldering  
condition (DIP)  
0.03 mm or less at the center of the connector with the connector ends as the reference.  
Reflow conditions by automatic soldering machine: Soldering temperature: 250± 5˚C,  
for 3 seconds or less.  
Manual soldering conditions : Soldering iron temperature: 290±10˚C,  
soldering time: 2 second or less.  
6. Cleaning conditions  
See "GUIDE TO HIROSE NYLON CONNECTORS."  
7. Connecting conditions  
See "GUIDE TO HIROSE NYLON CONNECTORS."  
Because the crimp terminals are very small, use utmost care when crimping them in  
accordance with the"Crimping conditions list" and "Crimping quality standards."  
When inserting or extracting the connectors, do not pry them forcibly, to prevent them from  
beging damaged.  
8. PRECAUTIONS  
54  

DF13-6S-1.25C(41) 相关器件

型号 制造商 描述 价格 文档
DF13-6S-1.25DS HRS 1.25mm Pitch Miniature Crimping Connector 获取价格
DF13-6S-1.25DSA HRS 1.25mm Pitch Miniature Crimping Connector 获取价格
DF13-6S-1.25H HRS 1.25mm Pitch Miniature Crimping Connector 获取价格
DF13-6S-1.25V HRS 1.25mm Pitch Miniature Crimping Connector 获取价格
DF13-7P-1.25(20) HRS Board Connector, 7 Contact(s), 1 Row(s), Male, Straight, Surface Mount Terminal, 获取价格
DF13-7P-1.25(50) HRS Board Connector, 7 Contact(s), 1 Row(s), Male, Straight, Surface Mount Terminal, 获取价格
DF13-7P-1.25C HRS 1.25mm Pitch Miniature Crimping Connector 获取价格
DF13-7P-1.25DS HRS 1.25mm Pitch Miniature Crimping Connector 获取价格
DF13-7P-1.25DS(25) HRS 连接器类型:插头;线束品:无;安全规格:UL;PIN数:7;额定电流:1.0 A;(AC)额定电压:AC 150.0 V;(DC)额定电压:DC 150.0 V;(嵌合部分)列数:1;安装间距:1 获取价格
DF13-7P-1.25DSA HRS 1.25mm Pitch Miniature Crimping Connector 获取价格

DF13-6S-1.25C(41) 相关文章

  • HARTING(浩亭)圆形连接器产品选型手册
    2024-10-31
    6
  • HYCON(宏康科技)产品选型手册
    2024-10-31
    6
  • GREEGOO整流二极管和晶闸管产品选型手册
    2024-10-31
    7
  • 西门子豪掷106亿美元,战略收购工程软件巨头Altair
    2024-10-31
    8