DF13C-7P-1.25V(20) [HRS]
Board Connector, 7 Contact(s), 1 Row(s), Male, Straight, 0.049 inch Pitch, Surface Mount Terminal, Locking Mech, Beige Insulator, Receptacle;型号: | DF13C-7P-1.25V(20) |
厂家: | HRS |
描述: | Board Connector, 7 Contact(s), 1 Row(s), Male, Straight, 0.049 inch Pitch, Surface Mount Terminal, Locking Mech, Beige Insulator, Receptacle PC 连接器 |
文件: | 总11页 (文件大小:632K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
1.25mm Pitch Miniature Crimping Connector
DF13 Series
Type
Mounting Type Mounting Height(h)
5.3mm
DIP
SMT
DIP
5.8mm
3.6mm
SMT
■Features
Correspond to Automatic Mounting
Secure the automatic plain area for the absorption
type automatic mounting machine.
1. Miniature Size
Designed in the low profile at mounting height 5.8mm.
(SMT mounting straight type)
(For DIP type, the mounting height is to 5.3mm to the
straight and 3.6mm at the right angle)
Straight Type
Absorption area
2. Multi-contact
The double row type achieves the multi-contact up to 40
contacts, and secures 30% higher density in the mounting
area, compared with the single row type.
3. Correspond to Automatic Mounting
The header provides the grade with the vacuum absorption
area, and secures automatic mounting by the embossed
tape packaging.
In addition, the tube packaging can be selected.
4. Integral Basic Function Despite Miniature Size
Metal fitting
The header is designed in a scoop-proof box structure, and
completely prevents mis-insertion.
Right Angle Type
Absorption area
In addition, the surface mounting (SMT) header is equipped
with the metal fitting to prevent solder peeling.
■Applications
Note PC, mobile terminal, miniature type business equipment,
and other various consumer equipment, including video
camera
Figure 1
B242
DF13 Series■1.25mm Pitch Miniature Crimping Connector
■Product Specifications
+ +
Operating Temperature Range: -35 to 85ç(Note 1) Storage Temperature Range: -10 to 60ç(Note 2)
Current rating 1A
Rating
Voltage rating 150V AC Operating Moisture Range: 20 to 80%
Storage Moisture Range: 40 to 70%
(Note 2)
Item
Specification
Condition
1.Insulation Resistance 500M ohms min.
100V DC
2.Withstanding voltage
3.Contact Resistance
No flashover or insulation breakdown.
30m ohms max.
500V AC/1 minute
100mA
4.Single Insertion/Extraction Force 0.3N (30gf) min., 3N (300gf) max.
Measured at the square steel pin of 0.35 0.002mm
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-55ç: 30 minutes■ 5 to 35ç: 10 minutes■ 85ç: 30 minutes■ 5 to 35ç: 10 minutes) 5 cycles
Tin plating: 30 cycles
5.Vibration
No electrical discontinuity of 1µs or more
6.Humidity (Steady state) Contact resistance: 30m ohms max. Insulation resistance: 500M ohms min.
Contact resistance: 30m ohms max. Insulation resistance: 500M ohms min.
7.Temperature Cycle
8.Durability (Mating/un-mating) Contact resistance: 30m ohms max.
Gold plating: 50 cycles
9.Resistance to Soldering heat
No deformation of components affecting performance.
Flow: 250ç for 10 seconds
Manual soldering: 300ç for 3 seconds
Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
■Material
Product
Part
Insulator
Contact
Material
Polyamide
Phosphor copper
Polyamide
Brass
Finish
Beige
Remarks
UL94V-0
Crimping Socket
Crimping Contact for Socket
Tin plated or gold plated
Beige
Insulator
Contact
UL94V-0
UL94V-0
Pin Header (Through hole)
Tin plated
Insulator
Contact
Polyamide
Brass
Beige
Pin Header (SMT Single row)
Tin plated or gold plated
Tin plated
Metal Fitting
Insulator
Contact
Phosphor copper
Polyamide
Brass
Beige
UL94V-0
Pin Header (SMT Double row)
Tin-copper plated or gold plated
Tin plated
Metal Fitting
Phosphor copper
■Ordering Information
■Connector
DF13 # - * S - 1.25 C
q
w
e
r
t
y
q Series Name
w Style Symbol
: DF13
e
r
r
r
t
t
Number of Contacts
t Contact Pitch: 1.25mm
: Blank: With boss
A: Without boss
Single row: 2 to 12, 14, 15
Double row: 10, 20, 30, 40
Connector Type
y Connection Form / Contact Style.
C : Crimping socket / DSA : Straight through hole
DS : Right angle through hole / V : Straight SMT
H : Right angle SMT
V Type
B: With boss, embossed tape type
C: Without boss, embossed tape type
S: Single row socket / P: Single row pin header
DS: Double row socket / DP: Double row pin header
■Contact
q Style Symbol Blank: Standard
e Packaging Type SCF: Socket Contact/Reel
DF13 # - 2630 SCF A
G: Low insertion / extraction r Plating Type Blank: Tin plated
q
w
e
r
w
Applicable Cable Size 2630: AWG26 to 30
3032: AWG30 to 32
A : Gold plated
B243
DF13 Series■1.25mm Pitch Miniature Crimping Connector
■Single Row Socket
Photo: Contact insertion
Unit: mm
B RoHS
Part Number
DF13-2S-1.25C
DF13-3S-1.25C
DF13-4S-1.25C
DF13-5S-1.25C
DF13-6S-1.25C
DF13-7S-1.25C
DF13-8S-1.25C
CL No.
Number of Contacts
A
B
RoHS
Yes
Part Number
DF13- 9S-1.25C
DF13-10S-1.25C
DF13-11S-1.25C
DF13-12S-1.25C
DF13-13S-1.25C
DF13-14S-1.25C
DF13-15S-1.25C
CL No.
Number of Contacts
A
536-0001-4
536-0002-7
536-0003-0
536-0004-2
536-0005-5
536-0006-8
536-0007-0
2
3
4
5
6
7
8
1.25 4.15
2.50 5.40
3.75 6.65
5.00 7.90
6.25 9.15
7.50 10.40
8.75 11.65
536-0008-3
536-0009-6
536-0010-5
536-0011-8
536-0012-0
536-0013-3
536-0014-6
9
10.00 12.90
11.25 14.15
12.50 15.40
13.75 16.65 Yes
15.00 17.90
16.25 19.15
17.50 20.40
10
11
12
13
14
15
Note 1.The quantity is delivered per bag (100 pcs.). If needed, please select and order the products per bag.
■Double Row Socket
Photo: Contact insertion state
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
RoHS
DF13-10DS-1.25C 536-0550-2
DF13-20DS-1.25C 536-0555-6
DF13-30DS-1.25C 536-0560-6
DF13-40DS-1.25C 536-0565-0
10
20
30
40
10.40
16.65
22.90
29.15
5.00
11.25
17.50
23.75
Yes
Note:The quantity is delivered per bag (100pcs). If needed, please select and order the products per bag.
B244
DF13 Series■1.25mm Pitch Miniature Crimping Connector
■Single Row Straight Pin Header (Through hole)
No.] **, (**)
–
in plated
plated, tube packaging
BTube Dimensions
5
■Board Through-hole Diameter:Ø0.6 0.03
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
Tube Packaging Quantity RoHS
Part Number
CL No.
Number of Contacts
9
A
B
Tube Packaging Quantity RoHS
115
37
DF13-2P-1.25DSA(**) 536-0101-9-**
DF13-3P-1.25DSA(**) 536-0102-1-**
DF13-4P-1.25DSA(**) 536-0103-4-**
DF13-5P-1.25DSA(**) 536-0104-7-**
DF13-6P-1.25DSA(**) 536-0105-0-**
DF13-7P-1.25DSA(**) 536-0106-2-**
DF13-8P-1.25DSA(**) 536-0107-5-**
2
3
4
5
6
7
8
1.25 4.15
2.50 5.40
3.75 6.65
5.00 7.90
6.25 9.15
7.50 10.40
8.75 11.65
DF13- 9P-1.25DSA(**) 536-0108-8-**
DF13-10P-1.25DSA(**) 536-0109-0-**
DF13-11P-1.25DSA(**) 536-0110-0-**
DF13-12P-1.25DSA(**) 536-0111-2-**
DF13-13P-1.25DSA(**) 536-0112-5-**
DF13-14P-1.25DSA(**) 536-0113-8-**
DF13-15P-1.25DSA(**) 536-0114-0-**
10.00 12.90
11.25 14.15
12.50 15.40
13.75 16.65
15.00 17.90
16.25 19.15
17.50 20.40
89
72
34
31
10
11
12
13
14
15
61
52
46
41
29
27
25
23
Yes
Yes
Note 1.The quantity at the specific No."None" is delivered per bag (100 pcs.). If needed, please select and order the products per bag.
Note 2.Order the tube packaging product, multiplying the tube packaging quantity.
■Single Row Right Angle Pin Header (Through hole)
ific No.] **, (***)
–
Tin plated tube packaging
BTube Dimensions
■Board Through-hole Diameter:Ø0.6 0.03
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
Tube Packaging Quantity RoHS
Part Number
CL No.
Number of Contacts
A
B
Tube Packaging Quantity RoHS
2
3
4
5
6
7
8
1.25 4.15
2.50 5.40
3.75 6.65
5.00 7.90
6.25 9.15
7.50 10.40
8.75 11.65
115
89
72
61
52
46
41
9
10.00 12.90
11.25 14.15
12.50 15.40
13.75 16.65
16.25 19.15
17.50 20.40
37
34
31
DF13-2P-1.25DS(20) 536-0151-7-20
DF13-3P-1.25DS(20) 536-0152-0-20
DF13-4P-1.25DS(20) 536-0153-2-20
DF13-5P-1.25DS(20) 536-0154-5-20
DF13-6P-1.25DS(20) 536-0155-8-20
DF13-7P-1.25DS(20) 536-0156-0-20
DF13-8P-1.25DS(20) 536-0157-3-20
DF13- 9P-1.25DS(20) 536-0158-6-20
DF13-10P-1.25DS(20) 536-0159-9-20
DF13-11P-1.25DS(20) 536-0160-8-20
DF13-12P-1.25DS(20) 536-0161-0-20
DF13-14P-1.25DS(20) 536-0163-6-20
DF13-15P-1.25DS(20) 536-0164-9-20
10
11
12
14
15
Yes
29
Yes
25
23
Note 1.Order the tube packaging product, multiplying the tube packaging quantity.
B245
DF13 Series■1.25mm Pitch Miniature Crimping Connector
■Single Row Straight Pin Header (SMT)
■(Three-Wall/Correspond to Vacuum Absorption)
BPCB mounting pattern
Note 1.Shaded area must be free of any
electrically conductive traces to
avoid contact with soldered pin
header terminations.
This pin header is a three-wall type, header has sufficiently large flat areas to allow
pick-up with vacuum nozzles of automatic placement equipment.
[Specific No.] **, (**)
(21): Tin plated embossed tape packaging
–
(51): Gold plated embossed tape packaging
Unit: mm
Emboss
Number of
Part Number
CL No.
A
B
C
D
E
F
RoHS
Contacts
Width
2
3
4
5
6
7
8
9
10
11
12
14
15
1.25 4.15 7.15 5.65 1.95 2.20
2.50 5.40 8.40 6.90 3.20 3.45
3.75 6.65 9.65 8.15 4.45 3.10
5.00 7.90 10.90 9.40 5.70 4.35
6.25 9.15 12.15 10.65 6.95 5.60
7.50 10.40 13.40 11.90 8.20 6.85
8.75 11.65 14.65 13.15 9.45 8.10
10.00 12.90 15.90 14.40 10.70 9.35
11.25 14.15 17.15 15.65 11.95 10.60
12.50 15.40 18.40 16.90 13.20 11.85
13.75 16.65 19.65 18.15 14.45 13.10
16.25 19.15 22.15 20.65 16.95 15.60
17.50 20.40 23.40 21.90 18.20 16.85
16
16
24
24
24
24
24
24
24
32
32
32
44
DF13C- 2P-1.25V(**)
DF13C- 3P-1.25V(**)
DF13C- 4P-1.25V(**)
DF13C- 5P-1.25V(**)
DF13C- 6P-1.25V(**)
DF13C- 7P-1.25V(**)
DF13C- 8P-1.25V(**)
DF13C- 9P-1.25V(**)
DF13C-10P-1.25V(**)
DF13C-11P-1.25V(**)
DF13C-12P-1.25V(**)
DF13C-14P-1.25V(**)
DF13C-15P-1.25V(**)
536-0401-2-**
536-0402-5-**
536-0403-8-**
536-0404-0-**
536-0405-3-**
536-0406-6-**
536-0407-9-**
536-0408-1-**
536-0409-4-**
536-0410-3-**
536-0411-6-**
536-0413-1-**
536-0414-4-**
Yes
Note 1.Please order the embossed tape packaging product according to reel number. (1000 pcs. per reel)
B246
DF13 Series■1.25mm Pitch Miniature Crimping Connector
■Single Row Straight Pin Header (SMT)
■(Four-Wall/Correspond to Vacuum Absorption)
BPCB mounting pattern
[Specific No.] **, (**)
–
(21): Tin plated embossed tape packaging
(51): Gold plated embossed tape packaging
Unit: mm
Number of
Emboss
RoHS
Part Number
CL No.
A
B
C
D
Contacts
Width
DF13A- 2P-1.25H(**)
DF13A- 3P-1.25H(**)
DF13A- 4P-1.25H(**)
DF13A- 5P-1.25H(**)
DF13A- 6P-1.25H(**)
DF13A- 7P-1.25H(**)
DF13A- 8P-1.25H(**)
DF13A- 9P-1.25H(**)
DF13A-10P-1.25H(**)
DF13A-11P-1.25H(**)
DF13A-12P-1.25H(**)
DF13A-14P-1.25H(**)
DF13A-15P-1.25H(**)
CL536-0301-8-**
CL536-0302-0-**
CL536-0303-3-**
CL536-0304-6-**
CL536-0305-9-**
CL536-0306-1-**
CL536-0307-4-**
CL536-0308-7-**
CL536-0309-0-**
CL536-0310-9-**
CL536-0311-1-**
CL536-0313-7-**
CL536-0314-0-**
2
3
4
5
6
7
8
9
10
11
12
14
15
1.25 4.15 7.15 5.65
2.50 5.40 8.40 6.90
3.75 6.65 9.65 8.15
5.00 7.90 10.90 9.40
6.25 9.15 12.15 10.65
7.50 10.40 13.40 11.90
8.75 11.65 14.65 13.15
10.00 12.90 15.90 14.40
11.25 14.15 17.15 15.65
12.50 15.40 18.40 16.90
13.75 16.65 19.65 18.15
16.25 19.15 22.15 20.65
17.50 20.40 23.40 21.90
16
16
24
24
24
24
24
24
24
32
32
32
44
Yes
Note 1.Please order the embossed tape packaging product according to reel number. (1000 pcs. per reel)
B247
DF13 Series■1.25mm Pitch Miniature Crimping Connector
■Double Row Straight Pin Header (SMT)
■(Four-Wall/Correspond to Vacuum Absorption)
BPCB mounting pattern
Note 1.Shaded area must be free of any electrically
conductive traces to avoid contact with soldered
pin header terminations.
[Specific No.] - **, (**)
(95): Tin-copper plated embossed tape packaging
(91): Gold plated embossed tape packaging
Unit: mm
Number of
Spec No. Spec No. Emboss
RoHS
A
B
C
Part Number
CL No.
Contacts
(26)
K
K
–
(56)
K
Width
24
10
20
30
40
12.10 5.00 8.70
18.35 11.25 14.95
24.60 17.50 21.20
30.85 23.75 27.45
DF13A-10DP-1.25V(**)
DF13A-20DP-1.25V(**)
DF13A-30DP-1.25V(**)
DF13A-40DP-1.25V(**)
536-0600-9-**
536-0605-2-**
536-0610-2-**
536-0615-6-**
K
32
Yes
K
44
K
44
–
Note 1.Please order the tube packaging product, multiplying the tube packaging quantity.
Note 2.Please order the embossed tape packaging product according to reel number. (1 reel: 1000 pcs.)
Note 3.The absorption cap is attached to the embossed tape packaging product.
B248
DF13 Series■1.25mm Pitch Miniature Crimping Connector
Part Number
DF13-3032SCF
DF13-3032SCFA(04)
DF13-2630SCF
DF13-2630SCFA(04)
DF13G-2630SCF
DF13G-2630SCFA
CL No.
Packaging Type
Quantity
10,000
Finish
■Crimping Contact
536-0299-8
536-0641-6-04
536-0300-5
536-0298-5-04
536-0643-1
536-0642-9
Tin plating
Gold plating
Tin plating
Gold plating
Tin plating
Gold plating
KDF13
Reel
Reel
10,000
(Low insertion/extraction)
■Applicable Cable (Tin Plating Annealed Copper Wire)
Conductor Size (Wire construction)
AWG26(7 cores./0.16mm)
AWG28(7 cores./0.127mm)
AWG30(7 cores./0.1mm)
Jacket Diameter
Ø0.65 to Ø1.0mm
AWG32(7 cores./0.08mm)
Note:If other cables are used instead of the applicable cable, please contact the Hirose
sales department.
■Recommended Cable
■Strip Length
KDF13G
UL1571, UL1061
1.2 to 1.9mm
1
1.5
0.15
BApplicable Crimping Tool
Type
Part Number
CL No.
Applicable Contact
DF13-2630SCF/SCFA
DF13G-2630SCF/SCFA
DF13-3032SCF/SCFA
---------------
AP105-DF13-2630S
901-4531-9
Applicator
AP105-DF13-3032S
CM-105
901-4552-9
901-0005-4
550-0256-1
Press Main Unit
Manual Crimping Tool DF13-TB2630HC
DF13-2630SCF
DF13-2630SCF/SCFA
DF13G-2630SCF/SCFA
DF13-3032SCF/SCFA
Extraction Tool DF-C-PO(B)
550-0179-2
Note 1.If a trouble has occurred due to other tools, which are not designated by Hirose,
Hirose won't guarantee any product.
Note 2.The manual crimping tool is used to sequentially cut the reel contact with carrier.
BApplication Pattern
SMT
(Single Row Product)
Through hole
(Single Row Product)
SMT
(Double Row Product)
B249
DF13 Series■1.25mm Pitch Miniature Crimping Connector
BEmbossed Carrier Tape Dimensions
KDF13B-*P-1.25V With boss
KDF13C-*P-1.25V Without boss
KDF13-*P-1.25H
KDF13A-*P-1.25H
Unit: mm
Product Type
DF13B-*P-1.25V
DF13C-*P-1.25V
DF13-*P-1.25H
Number of Contacts
A
B
C
D
2, 3
4 to 10
11 to 14
15
16
24
32
44
–––––––
–––––––
28.4
7.5
16.4
24.4
32.4
44.4
11.5
14.2
20.2
40.4
DF13A-*P-1.25H
Note:The 13 contacts is not serialized.
B250
DF13 Series■1.25mm Pitch Miniature Crimping Connector
BPrecautions
1. Recommended Temperature
Profile (SMT)
■■DF13A-*P-1.25H
■■DF13C-*P-1.25V
Temperature
250ç
10s max.
Max. 230
200ç
60s max.
Soldering
180 10
150ç
60 to 120s
Preheating
100ç
Time
■■DF13A-*DP-1.25V
Note 1.Up to 2 cycles of Reflow soldering are possible under the same conditions, provided
that there is a return to normal temperature between the first and second cycle.
Note 2.The temperature profile indicates the board surface temperature at the point of
contacts with the connector terminals.
Note 3.Slight variations in color of the plastic compounds do not affect form, fit or function of
the connector.
2. Recommended Soldering
Condition (SMT)
Manual soldering: 290 10ç for 2 seconds max.
3. Recommended Screen
Thickness (SMT)
0.15 to 0.2mm
4. Board Warpage (SMT)
5. Recommended Soldering
5. Condition (Through hole)
6. Cleaning Condition
7. Connection Condition
Max 0.03mm in the connector center area, based on both connector edges
Flow: 250 5ç for 3 seconds
Manual soldering: 290 10ç for 2 seconds
Refer to Nylon Connector Use Hand book.
Refer to Nylon Connector Use Hand book.
■Carefully carry out the crimping operation according to "Crimping Condition Sheet" and
"Crimping Quality Standard", because the crimping contact is an extremely small style.
■Be careful for the excessive scoop insertion/extraction, which will cause damage to the product.
Refer to Nylon Connector Use Hand book.
8. Cautions
9. Precautions
B251
DF13 Series■1.25mm Pitch Miniature Crimping Connector
BPrecautions
<Precautions at Time of Insertion>
<Precautions at Time of Disconnection>
Align with the connector form and press down
continue pressing until there is a tactile click.
Align with the connector form and press down
continue pressing until there is a tactile click.
Handing
Handing
Method: Lightly grasping the base the cable, press the
connector with your finger and insert it.
Method: Grasp the cable so that the entire cable is
pulled evenly and it out.
Insertion Angle
Angle of Removal
Caution: Do not insert at an angle of 30° or greater.
Doing so will cause contact deformation or
case damage.
Caution: Do not remove at an angle of 30° or greater.
Doing so will cause contact deformation or
case damage.
Method: Insert with the connector parallel.
Method: Remove with the connector parallel.
Parallel
Diagonal
Parallel
Diagonal
Parallel
Diagonal
Parallel
Diagonal
B252
相关型号:
DF13C-7P-1.25V(76)
Board Connector, 7 Contact(s), 1 Row(s), Male, Straight, Surface Mount Terminal,
HRS
©2020 ICPDF网 联系我们和版权申明