DF14-5S-1.25C(40) [HRS]
Board Connector, 5 Contact(s), 1 Row(s), Female, Crimp Terminal, Socket;型号: | DF14-5S-1.25C(40) |
厂家: | HRS |
描述: | Board Connector, 5 Contact(s), 1 Row(s), Female, Crimp Terminal, Socket |
文件: | 总6页 (文件大小:610K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NC Nylon Connectors
DF14 Series (1.25mm Pitch)
DF14 SERIES
1.25 mm Pitch Ultra-Low Profile Crimp Connectors
■ Features
1. Ultra-low profile
Designed to have a low profile on board, only right-angle models available.
Package height on a board: 2.5mm
Allows you to pick up signals from a very small space between
Connector mounted on a board
boards.
(See the figure 1 on the right.)
2. Compatible with automatic packaging
Vacuum-operated header allows automatic emboss packaging.
Can be packed in magazines for delivery.
3. Four-wall type prevents the sockets from rubbing the board.
Box construction prevents prying out, completely preventing mis-
insertion. Also, the wall on the board side prevents the socket from
rubbing the board.
Fig. 1
Reinforcement prevents separation of solder connections.
■ Application
LCD, notebook computers, portable information terminals, compact OA equipment, and various consumer equipment such
as videomovies.
55
NC Nylon Connectors
DF14 Series (1.25mm Pitch)
■ Product Standard
–
–
Rated current
Rating
1A
Operating temp.
35~85˚C(Note 1)
Storage temp.
10~60˚C (Note 2)
40~70% (Note 2)
Rated voltage
AC150V Operating humidity
40~80%
Storage humidity
Item
Standard
Conditions
1. Insulation resistance
2. Withstand voltage
3. Contact resistance
500 MΩ or more
Measured at 100 VDC
AC500V 1 minute
Measured at 100 mA
No flashover or dielectric breakdown allowed
30 mΩ or less
4. Insertion and withdrawals force MIN 0.3 N(30gf), MAX 3 N(300gf)
To be measured with a steel pin of M0.3±0.002mm
5. Vibration resistance
6. Moisture resistance
7. Temperature cycle
No electrical discontinuity of 1 µs or more allowed
Contact resistance: 30 mΩ or less, insulation resistance:500MΩ or more
Frequency: 10 - 55 Hz, single-side amplitude: 0.75 mm, 3 directions for 2 hours
Temperature: 40±2°C, humidity: 90 - 95%, allow 96 hours before measurement
(-55°C for 30 min. / 5 - 35°C for 10 min. / 85°C for 30 min. / 5 - 35°C for 10 min.)
5 cycles
Contact resistance: 30 mΩ or less, insulation resistance: 500 MΩ or more
8. Insertion/extraction life
9. Solder heat resistance
Contact resistance: 30 mΩ or less
Solder-plated: 30 insertions/extractions
No melting of resin affecting the connector performance allowed
SMT type
Reflow: At recommended Manual soldering: solder temperature:
temperature profile 300°C for 3 seconds
Note 1: Includes temperature rise when power is on.
Note 2: "Storage" refers to a long period of storage without use of the product before being mounted on a board.
The operating temperature and humidity ranges apply to the connectors mounted on a board when turned off, and connectors under
temporary storage such as those being transported.
Note 3: The above standards are typical for the DF14 series. The formal standards are stated in the delivery specifications.
■ Material
Product
Part
Material
Polyamide resin
Phosphor bronze
Polyamide resin (Note 1)
Brass
Processing
Beige
UL Rating
UL94V-0
Crimp socket
Insulation
Terminal
Insulation
Terminal
Fittings
Crimp socket terminal
Tin-plated
Beige
UL94V-0
Pin header
Tin-plated
Tin-plated
Phosphor bronze
Note 1: Only the 30-pin models use the pin header insulation of PPS resin (light brown).
Note 2: Our tin plating is protected from whiskers.
■ Structure of the product number
The product specifications can be determined from the product number.
When ordering, select products using the product numbers listed in this catalog 57 to 59 pages.
● Connector
DF14 - ✻ S - 1.25C
➁ ➂ ➃
➄
➅
➀
➄
➅
Contact pitch : 1.25mm
➀
➁
➂
➃
Series Name : DF
Series No. : 14
Connection form
C : Crimp case
/Shape of terminal
No. of contact : 2~10, 15, 20, 25, 30
Type of connector
H : Right angle SMT
S : Single-row socket
P : Single-row pin header
● Terminal
DF14 - 2628SCF
➀
➁
➀
➁
Series Name : DF
2628 : AWG26~28
3032 : AWG30~32
Type of form
/Type of packaging
SCF : Socket contact Reel
·
56
NC Nylon Connectors
DF14 Series (1.25mm Pitch)
■ Crimp socket
Photo shows engaged pins
Unit : mm
HRS No.
Product No.
DF14- 2S-1.25C(✻✻
DF14- 3S-1.25C(✻✻
DF14- 4S-1.25C(✻✻
DF14- 5S-1.25C(✻✻
DF14- 6S-1.25C(✻✻
DF14- 7S-1.25C(✻✻
DF14- 8S-1.25C(✻✻
DF14- 9S-1.25C(✻✻
DF14-10S-1.25C(✻✻
DF14-15S-1.25C(✻✻
DF14-20S-1.25C(✻✻
DF14-25S-1.25C(✻✻
DF14-30S-1.25C(✻✻
No. of contact
A
B
538-0005-8-✻✻
538-0006-0-✻✻
538-0007-3-✻✻
538-0008-6-✻✻
538-0009-9-✻✻
538-0010-8-✻✻
538-0011-0-✻✻
538-0013-6-✻✻
538-0014-9-✻✻
538-0054-3-✻✻
538-0059-7-✻✻
538-0064-7-✻✻
538-0012-3-✻✻
)
2
3
4.45
1.25
)
5.70
2.50
)
4
6.95
3.75
)
5
8.20
5.00
)
6
9.45
6.25
)
7
10.70
11.95
13.20
14.45
20.70
26.95
33.20
39.45
7.50
)
8
8.75
)
9
10.00
11.25
17.50
23.75
30.00
36.25
)
10
15
20
25
30
[Specification No.]: -**,(**)
Blank : 100 pcs. per pack
(40) : 500 pcs. per package
(41) : 1000 pcs. per package
)
)
)
)
Note 1: Minimum order quantity of the models without a number specified is one pack containing 100 sockets.
Note 2: 500 and 1000 pieces per pack should be ordered in quantity of sockets. Order in multiples of order units, e.g., 500, 1000, 1500,-- .
■ Crimp socket terminal
HRS No.
Product No.
DF14-2628SCF
DF14-3032SCF
Type
Quantity
Processing
Tin-plated
538-0001-7-✻✻
538-0003-2-✻✻
Reel terminal
Reel terminal
10,000 units per reel
● Applicable wire (Tin-plated annealed copper wire) ● Recommended wire
UL1571
Conductor size (core construction) Coating diameter
AWG 26 (7cores/0.16mm)
AWG 28 (7cores/0.127mm)
● Strip length
1.2~1.9mm
ø0.54~ø1mm
AWG 30 (7cores/0.1mm)
AWG 32 (7cores/0.08mm)
Note: Contact our sales department for unspecified wires.
❖ Applicable crimping tool
Type
Applicator
HRS No.
Product No.
AP105-DF14-2628S
AP105-DF14-3032S
CM-105
Applicable contact
DF14-2628SCF
DF14-3032SCF
.........
DF14-2628SCF
DF14-3032SCF
901-4548-1
901-4544-0
901-0005-4
550-0261-1
550-0262-4
Press body
Manual crimping
tool
DF14-2628/CR-HT
DF14-3032/CR-HT
Note 1: Any problem caused by using a tool not approved by HIROSE is out of warranty.
Note 2: The manual crimping tool consecutively cuts carrier-fitted reel terminals.
57
NC Nylon Connectors
DF14 Series (1.25mm Pitch)
■ Right-angle pin header (SMT)
Note 1: 2 ~ 5-pin models have no lock hole.
Note 2: The hole is not required for products without the guide boss.
❖ Recommended board pattern
❖
Magazine dimensional drawing
Note 3: The hole is not required for products without the guide.
[Specification No.]: -**,(**)
(20) : Tin-plated, magazine packaging
(21) : Tin-plated, embossed packaging
Unit : mm
No. of products
in a magazine/
pcs./magazine
Guide post - provided
HRS No.
Guide post - not provided
HRS No.
No. of
A
B
C
D
contacts
Product No.
DF14- 2P-1.25H (
DF14- 3P-1.25H (
DF14- 4P-1.25H (
DF14- 5P-1.25H (
DF14- 6P-1.25H (
DF14- 7P-1.25H (
DF14- 8P-1.25H (
DF14- 9P-1.25H (
DF14-10P-1.25H (
DF14-15P-1.25H (
DF14-20P-1.25H (
DF14-25P-1.25H (
DF14-30P-1.25H (
Product No.
DF14A- 2P-1.25H (
DF14A- 3P-1.25H (
DF14A- 4P-1.25H (
DF14A- 5P-1.25H (
DF14A- 6P-1.25H (
DF14A- 7P-1.25H (
DF14A- 8P-1.25H (
DF14A- 9P-1.25H (
DF14A-10P-1.25H (
DF14A-15P-1.25H (
DF14A-20P-1.25H (
DF14A-25P-1.25H (
DF14A-30P-1.25H (
538-0021-4-
538-0022-7-
538-0023-0-
538-0024-2-
538-0025-5-
538-0026-8-
538-0027-0-
538-0028-3-
538-0029-6-
538-0084-4-
538-0089-8-
538-0094-8-
538-0020-1-
)
538-0033-3-
538-0034-6-
538-0035-9-
538-0036-1-
538-0037-4-
538-0038-7-
538-0039-0-
538-0040-9-
538-0041-1-
538-0114-3-
538-0119-7-
538-0124-7-
538-0045-2-
)
✻✻
2
3
7.45
8.70
1.25
2.50
3.75
6.45
7.70
8.05
9.30
66
56
49
44
39
36
32
30
28
20
16
13
11
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
✻✻
)
✻✻
)
✻✻
)
✻✻
)
✻✻
4
9.95
8.95 10.55
)
✻✻
)
✻✻
5
11.20
12.45
13.70
14.95
5.00 10.20 11.80
6.25 11.45 13.05
7.50 12.70 14.30
8.75 13.95 15.55
)
✻✻
)
✻✻
6
)
✻✻
)
✻✻
7
)
✻✻
)
✻✻
8
)
✻✻
)
✻✻
9
16.20 10.00 15.20 16.80
17.45 11.25 16.45 18.05
23.70 17.50 22.70 24.30
29.95 23.75 28.95 30.55
36.20 30.00 35.20 36.80
42.45 36.25 41.45 43.05
)
✻✻
)
✻✻
10
15
20
25
30
)
✻✻
)
✻✻
)
✻✻
)
✻✻
)
✻✻
)
✻✻
)
✻✻
)
✻✻
Note 1: Order magazine packaged products in multiples of the number in one magazine.
Note 2: Order embossed packaged product in reels (1,000 pcs. per reel).
58
NC Nylon Connectors
DF14 Series (1.25mm Pitch)
❖ Embossed tape carrier dimensional drawing (complies with JIS-C-0806)
■ 2 ~10 contacts
■ 15, 20, 25, 30 contacts
Unit : mm
D
No. of
Insertion connector
DF14/14A- 2P-1.25H
DF14/14A- 3P-1.25H
DF14/14A- 4P-1.25H
DF14/14A- 5P-1.25H
DF14/14A- 6P-1.25H
DF14/14A- 7P-1.25H
DF14/14A- 8P-1.25H
DF14/14A- 9P-1.25H
DF14/14A-10P-1.25H
DF14/14A-15P-1.25H
DF14/14A-20P-1.25H
DF14/14A-25P-1.25H
DF14/14A-30P-1.25H
A
B
C
contacts
2
3
16
16
24
24
24
24
24
24
24
44
44
56
56
7.5
16.4
16.4
24.4
24.4
24.4
24.4
24.4
24.4
24.4
44.4
44.4
56.4
56.4
.
.
.
.
.
.
.
.
.
40.4
40.4
52.4
52.4
7.5
4
11.5
11.5
11.5
11.5
11.5
11.5
11.5
20.2
20.2
26.2
26.2
5
6
7
8
9
10
15
20
25
30
59
NC Nylon Connectors
DF14 Series (1.25mm Pitch)
❖ Notes on use
1. Recommended temperature
profile (SMT)
Note 1: You can solder a product up to two times under the same conditions, provided that
the product is allowed to cool back to room temperature before the second soldering.
Note 2: The above temperature refers to the board surface temperature of the connector lead.
2. Recommended soldering
conditions (SMT)
Soldering iron temperature: 290±10°C, soldering time: less than 3 seconds
3. Recommended screen
thickness (SMT)
0.15mm~0.2mm
4. Warp in board (SMT)
5. Cleaning conditions
6. Connecting conditions
0.03 mm or less at the center of the connector with the connector ends as the reference.
See "GUIDE TO HIROSE NYLON CONNECTORS."
See "GUIDE TO HIROSE NYLON CONNECTORS."
■Because the crimp terminals are very small, use utmost care when crimping them in
accordance with the"Crimping conditions list" and "crimping quality standards."
■When inserting or extracting the connectors, do not pry them forcibly, to prevent them from
being damaged.
7. PRECAUTIONS
60
相关型号:
DF14-6P-1.25H(25)
Board Connector, 6 Contact(s), 1 Row(s), Male, Right Angle, 0.049 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT
HRS
DF14-6P-1.25H(26)
Board Connector, 6 Contact(s), 1 Row(s), Male, Right Angle, Surface Mount Terminal, ROHS COMPLIANT
HRS
DF14-6P-1.25H(55)
Board Connector, 6 Contact(s), 1 Row(s), Male, Right Angle, Surface Mount Terminal, ROHS COMPLIANT
HRS
DF14-6P-1.25H(56)
Board Connector, 6 Contact(s), 1 Row(s), Male, Right Angle, Surface Mount Terminal, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明